Comprehensive Physicochemical Characterization, In Vitro Membrane Permeation, and In Vitro Human Skin Cell Culture of a Novel TOPK Inhibitor, HI-TOPK-032.

Nonmelanoma skin cancers (NMSC) are the most common skin cancers, and about 5.4 million people are diagnosed each year in the United States. A newly developed T-lymphokine-activated killer cell-originated protein kinase (TOPK) inhibitor, HI-TOPK-032, is effective in suppressing colon cancer cell growth, inducing the apoptosis of colon cancer cells and ultraviolet (UV) light-induced squamous cell carcinoma (SCC). This study aimed to investigate the physicochemical properties, permeation behavior, and cytotoxicity potential of HI-TOPK-032 prior to the development of a suitable topical formulation for targeted skin drug delivery. Techniques such as scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) spectroscopy, differential scanning calorimetry (DSC), hot-stage microscopy (HSM), X-ray powder diffraction (XRPD), Karl Fisher (KF) coulometric titration, Raman spectrometry, confocal Raman microscopy (CRM), attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), and Fourier transform infrared microscopy were used to characterize HI-TOPK-032. The dose effect of HI-TOPK-032 on in vitro cell viability was evaluated using a 2D cell culture of the human skin keratinocyte cell line (HaCaT) and primary normal human epidermal keratinocytes (NHEKs). Transepithelial electrical resistance (TEER) at the air-liquid interface as a function of dose and time was measured on the HaCAT human skin cell line. The membrane permeation behavior of HI-TOPK-032 was tested using the Strat-M® synthetic biomimetic membrane with an in vitro Franz cell diffusion system. The physicochemical evaluation results confirmed the amorphous nature of the drug and the homogeneity of the sample with all characteristic chemical peaks. The in vitro cell viability assay results confirmed 100% cell viability up to 10 µM of HI-TOPK-032. Further, a rapid, specific, precise, and validated reverse phase-high performance liquid chromatography (RP-HPLC) method for the quantitative estimation of HI-TOPK-032 was developed. This is the first systematic and comprehensive characterization of HI-TOPK-032 and a report of these findings.

Innovative Rocuronium Bromide Topical Formulation for Targeted Skin Drug Delivery: Design, Comprehensive Characterization, In Vitro 2D/3D Human Cell Culture and Permeation.

Cutaneous squamous cell carcinoma (cSCC) is the second-most common type of non-melanoma skin cancer and is linked to long-term exposure to ultraviolet (UV) radiation from the sun. Rocuronium bromide (RocBr) is an FDA-approved drug that targets p53-related protein kinase (PRPK) that inhibits the development of UV-induced cSCC. This study aimed to investigate the physicochemical properties and in vitro behavior of RocBr. Techniques such as thermal analysis, electron microscopy, spectroscopy and in vitro assays were used to characterize RocBr. A topical oil/water emulsion lotion formulation of RocBr was successfully developed and evaluated. The in vitro permeation behavior of RocBr from its lotion formulation was quantified with Strat-M® synthetic biomimetic membrane and EpiDerm™ 3D human skin tissue. Significant membrane retention of RocBr drug was evident and more retention was obtained with the lotion formulation compared with the solution. This is the first systematic and comprehensive study to report these findings.

Spray-Dried Inhalable Powder Formulations of Therapeutic Proteins and Peptides.

Respiratory diseases are among the leading causes of morbidity and mortality worldwide. Innovations in biochemical engineering and understanding of the pathophysiology of respiratory diseases resulted in the development of many therapeutic proteins and peptide drugs with high specificity and potency. Currently, protein and peptide drugs are mostly administered by injections due to their large molecular size, poor oral absorption, and labile physicochemical properties. However, parenteral administration has several limitations such as frequent dosing due to the short half-life of protein and peptide in blood, pain on administration, sterility requirement, and poor patient compliance. Among various noninvasive routes of administrations, the pulmonary route has received a great deal of attention and is a better alternative to deliver protein and peptide drugs for treating respiratory diseases and systemic diseases. Among the various aerosol dosage forms, dry powder inhaler (DPI) systems appear to be promising for inhalation delivery of proteins and peptides due to their improved stability in solid state. This review focuses on the development of DPI formulations of protein and peptide drugs using advanced spray drying. An overview of the challenges in maintaining protein stability during the drying process and stabilizing excipients used in spray drying of proteins and peptide drugs is discussed. Finally, a summary of spray-dried DPI formulations of protein and peptide drugs, their characterization, various DPI devices used to deliver protein and peptide drugs, and current clinical status are discussed.

Development of isradipine loaded self-nano emulsifying powders for improved oral delivery: in vitro and in vivo evaluation.

Isradipine (ISR) is a potent calcium channel blocker with low oral bioavailability due to low aqueous solubility, extensive first-pass metabolism and P-glycoprotein (P-gp)-mediated efflux transport. In the present investigation, an attempt was made to develop isradipine-loaded self-nano emulsifying powders (SNEP) for improved oral delivery. The liquid self-nano emulsifying formulations (L-SNEF/SNEF) of isradipine were developed using vehicles with highest drug solubility, i.e. Labrafil® M 2125 CS as oil phase, Capmul® MCM L8 and Cremophor® EL as surfactant/co-surfactant mixture. The developed formulations revealed desirable characteristics of self-emulsifying system such as nano-size globules ranging from 32.7 to 40.2 nm, rapid emulsification (around 60 s), thermodynamic stability and robustness to dilution. The optimized stable self-nano emulsifying formulation (SNEF2) was transformed into SNEP using Neusilin US2 (SNEP(N)) as adsorbent inert carrier, which exhibited similar characteristics of liquid SNEF. The solid state characterization of SNEP(N) by Fourier transform infrared spectroscopy, differential scanning calorimetry, powder X-ray diffraction and scanning electron microscopic studies shown transformation of crystalline drug into amorphous form or molecular state without any chemical interaction. The in vitro dissolution of SNEP(N) compared to pure drug was indicated by 18-fold increased drug release within 5 min. In vivo pharmacokinetic studies in Wistar rats showed significant improvement of oral bioavailability of isradipine from SNEP(N) with 3- and 2.5-fold increments in peak drug concentration (C(max)), area under curve (AUC(0-∞)) compared to pure isradipine. In conclusion, these results signify the improved oral delivery of isradipine from developed SNEP.

Development of ketoprofen loaded proliposomal powders for improved gastric absorption and gastric tolerance: in vitro and in situ evaluation.

The aim of the current investigation was to improve dissolution rate, gastric absorption and tolerance of a water insoluble non-steroidal anti-inflammatory drug ketoprofen by developing proliposomal powders. Ketoprofen proliposomal powders were prepared by solvent evaporation method with varying ratios of hydrogenated soyphosphatidyl choline (HSPC) and cholesterol. The prepared proliposomal powders were characterized for vesicle size, micromeritics, entrapment efficiency and in vitro dissolution behavior. Proliposomal powder (KPL3) composed of equimolar ratios of HSPC and cholesterol loaded on pearlitol SD 200 was selected as optimized formulation as it produced smaller liposomes (5.24 ± 1.35 µm) upon hydration with highest entrapment efficiency (53.16 ± 0.06%). All proliposomal powders showed improved dissolution characteristics than pure drug, however dissolution of drug from KPL3 was found to be highest (91.17 ± 6.3) and which is about 24 times higher than pure ketoprofen within 5 min. The transformation of crystalline ketoprofen to amorphous form was confirmed by solid state characterization. The absorption rate per hour for pure ketoprofen and proliposomal formulation (KPL3) was assessed in the stomach by conducting in situ gastric absorption studies in Wistar rats and was found to be 27 ± 1.22 and 36.98 ± 1.95%, respectively. In conclusion, enhanced dissolution and gastric absorption rate of ketoprofen from proliposomal powders suggest them as potential candidate for oral bioavailability improvement of ketoprofen.

Improved oral bioavailability of fexofenadine hydrochloride using lipid surfactants: ex vivo, in situ and in vivo studies.

Abstract The aim of the present study was to improve the dissolution, permeability and therefore oral bioavailability of the fexofenadine hydrochloride (FEX), by preparing lipid surfactant based dispersions using self-emulsifying carriers, i.e. Gelucire 44/14 (GLC) and d-α-tocopheryl polyethylene glycol 1000 succinate (Vitamin E TPGS or TPGS). The reprecipitation studies were conducted using these carriers to evaluate inhibition of reprecipitation by maintaining super saturation state. The aqueous solubility of the FEX was increased linearly with increasing GLC, TPGS concentrations as verified by the phase solubility studies. The dispersions of FEX were prepared in different drug/GLC (GD) and drug/TPGS (TD) ratios by melt method and evaluated. The prepared dispersions showed improved dissolution rate in distilled water as dissolution media and highest dissolution rate was achieved with dispersions prepared using TPGS. The solid state characterization was carried by differential scanning calorimetry and scanning electron microscopy indicated reduced crystallinity of the drug. Fourier transform infrared spectroscopy revealed the compatibility of drug with carriers. The ex vivo permeation studies conducted using intestinal gut sac technique, resulted in reduced efflux of the drug by inhibiting intestinal P-glycoprotein from the dispersions. The in situ perfusion studies and in vivo pharmacokinetic studies in male wistar rats showed improved absorption and oral bioavailability from the prepared dispersions as compared to pure drug.

Triple combination dry powder formulation of pretomanid, moxifloxacin, and pyrazinamide for treatment of multidrug-resistant tuberculosis.

Both latent and multidrug-resistant tuberculosis (TB) have been causing significant concern worldwide. A novel drug, pretomanid (PA-824), has shown a potent bactericidal effect against both active and latent forms of Mycobacterium tuberculosis (MTb) and a synergistic effect when combined with pyrazinamide and moxifloxacin. This study aimed to develop triple combination spray dried inhalable formulations composed of antitubercular drugs, pretomanid, moxifloxacin, and pyrazinamide (1:2:8 w/w/w), alone (PaMP) and in combination with an aerosolization enhancer, L-leucine (20 % w/w, PaMPL). The formulation PaMPL consisted of hollow, spherical, dimpled particles (<5 µm) and showed good aerosolization behaviour with a fine particle fraction of 70 %. Solid-state characterization of formulations with and without L-leucine confirmed the amorphous nature of moxifloxacin and pretomanid and the crystalline nature of pyrazinamide with polymorphic transformation after the spray drying process. Further, the X-ray photoelectron spectroscopic analysis revealed the predominant surface composition of L-leucine on PaMPL dry powder particles. The dose-response cytotoxicity results showed pyrazinamide and moxifloxacin were non-toxic in both A549 and Calu-3 cell lines up to 150 µg/mL. However, the cell viability gradually decreased to 50 % when the pretomanid concentration increased to 150 µg/mL. The in vitro efficacy studies demonstrated that the triple combination formulation had more prominent antibacterial activity with a minimum inhibitory concentration (MIC) of 1 µg/mL against the MTb H37Rv strain as compared to individual drugs. In conclusion, the triple combination of pretomanid, moxifloxacin, and pyrazinamide as an inhalable dry powder formulation will potentially improve treatment efficacy with fewer systemic side effects in patients suffering from latent and multidrug-resistant TB.

Inhalable Combination Powder Formulations for Treating Latent and Multidrug-Resistant Tuberculosis: Formulation and In Vitro Characterization.

Tuberculosis (TB) is an infectious disease resulting in millions of deaths annually worldwide. TB treatment is challenging due to a huge number of global latent infections and due to multidrug-resistant forms of TB. Inhaled administration of anti-TB drugs using dry powder inhalers has various advantages over oral administration due to its direct drug delivery and minimization of systemic side effects. Pretomanid (PA-824, PA) is a relatively new drug with potent activity against both active and latent forms of Mycobacterium tuberculosis (Mtb). It is also known for its synergistic effects in combination with pyrazinamide (PYR) and moxifloxacin (MOX). Fixed-dose combination powder formulations of either PYR and PA or PYR and MOX were prepared for inhaled delivery to the deep lung regions where the Mtb habitats were located. Powder formulations were prepared by spray drying using L-leucine as the aerosolization enhancer and were characterized by their particle size, morphology and solid-state properties. In vitro aerosolization behaviour was studied using a Next Generation Impactor, and stability was assessed after storage at room temperature and 30% relative humidity for three months. Spray drying with L-leucine resulted in spherical dimpled particles, 1.9 and 2.4 µm in size for PYR-PA and PYR-MOX combinations, respectively. The powder formulations had an emitted dose of >83% and a fine particle fraction of >65%. PA and MOX showed better stability in the combination powders compared to PYR. Combination powder formulations with high aerosolization efficiency for direct delivery to the lungs were developed in this study for use in the treatment of latent and multidrug-resistant TB infections.

Dissolution and Absorption of Inhaled Drug Particles in the Lungs.

Dry powder inhalation therapy has been effective in treating localized lung diseases such asthma, chronic obstructive pulmonary diseases (COPD), cystic fibrosis and lung infections. In vitro characterization of dry powder formulations includes the determination of physicochemical nature and aerosol performance of powder particles. The relationship between particle properties (size, shape, surface morphology, porosity, solid state nature, and surface hydrophobicity) and aerosol performance of an inhalable dry powder formulation has been well established. However, unlike oral formulations, there is no standard dissolution method for evaluating the dissolution behavior of the inhalable dry powder particles in the lungs. This review focuses on various dissolution systems and absorption models, which have been developed to evaluate dry powder formulations. It covers a summary of airway epithelium, hurdles to developing an in vitro dissolution method for the inhaled dry powder particles, fine particle dose collection methods, various in vitro dissolution testing methods developed for dry powder particles, and models commonly used to study absorption of inhaled drug.

Nose-to-Brain Delivery of Therapeutic Peptides as Nasal Aerosols.

Central nervous system (CNS) disorders, such as psychiatric disorders, neurodegeneration, chronic pain, stroke, brain tumor, spinal cord injury, and many other CNS diseases, would hugely benefit from specific and potent peptide pharmaceuticals and their low inherent toxicity. The delivery of peptides to the brain is challenging due to their low metabolic stability, which decreases their duration of action, poor penetration of the blood-brain barrier (BBB), and their incompatibility with oral administration, typically resulting in the need for parenteral administration. These challenges limit peptides' clinical application and explain the interest in alternative routes of peptide administration, particularly nose-to-brain (N-to-B) delivery, which allows protein and peptide drugs to reach the brain noninvasively. N-to-B delivery can be a convenient method for rapidly targeting the CNS, bypassing the BBB, and minimizing systemic exposure; the olfactory and trigeminal nerves provide a unique pathway to the brain and the external environment. This review highlights the intranasal delivery of drugs, focusing on peptide delivery, illustrating various clinical applications, nasal delivery devices, and the scope and limitations of this approach.

Design, Physicochemical Characterization, and In Vitro Permeation of Innovative Resatorvid Topical Formulations for Targeted Skin Drug Delivery.

Nonmelanoma skin cancers (NMSCs) are the most common malignancies worldwide and affect more than 5 million people in the United States every year. NMSC is directly linked to the excessive exposure of the skin to solar ultraviolet (UV) rays. The toll-like receptor 4 (TLR4) antagonist, resatorvid (TAK-242), is a novel prototype chemo preventive agent that suppresses the production of inflammation mediators induced by UV exposure. This study aimed to design and develop TAK-242 into topical formulations using FDA-approved excipients, including DermaBaseTM, PENcreamTM, polyethylene glycol (PEG)-400, propylene glycol (PG), carbomer gel, hyaluronic acid (HA) gel, and Pluronic® F-127 poloxamer triblock copolymer gel for the prevention of skin cancer. The physicochemical properties of raw TAK-242, which influence the compatibility and solubility in the selected base materials, were confirmed using X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC), hot-stage microscopy (HSM), Raman spectroscopy, and attenuated total reflectance Fourier-transform infrared (ATR-FTIR) spectroscopic analysis. The permeation behavior of TAK-242 from the prepared formulations was determined using Strat-M® transdermal diffusion membranes, and 3D cultured primary human-derived epidermal keratinocytes (EpiDermTM). Despite TAK-242's high molecular weight and hydrophobicity, it can permeate through reconstructed human epidermis from all formulations. The findings, reported for the first time in this study, emphasize the capabilities of the topical application of TAK-242 via these multiple innovative topical drug delivery formulation platforms.

Improved Dissolution Rate and Intestinal Absorption of Fexofenadine Hydrochloride by the Preparation of Solid Dispersions: In Vitro and In Situ Evaluation.

The objective of this study was to enhance dissolution and permeation of a low soluble, absorbable fexofenadine hydrochloride (FFH) by preparing solid dispersions using polyethylene glycol 20,000 (PEG 20,000) and poloxamer 188 as carriers. The phase solubility measurement for the supplied FFH revealed a linear increase in the solubility of fexofenadine with increasing carrier concentration in water (1.45 mg/mL to 11.78 mg/mL with 0% w/v to 30% w/v PEG 20,000; 1.45 mg/mL to 12.27 mg/mL with 0% w/v to 30% w/v poloxamer 188). To select the appropriate drug carrier concentration, a series of solid dispersions were prepared in the drug carrier weight ratios of 1:1, 1:2 and 1:4 by fusion method. The solid dispersions composed of drug carrier at 1:4 weight ratio showed highest dissolution with the time required for the release of 50% of the drug <15 min compared to the supplied FFH (>120 min). The intestinal absorption study presented a significant improvement in the absorption of drug from the solid dispersions composed of poloxamer 188 than PEG 20,000. In summary, the solid dispersions of FFH prepared using PEG 20,000 and poloxamer 188 demonstrated improved dissolution and absorption than supplied FFH and could be used to improve the oral bioavailability of fexofenadine.

Inhalation Delivery for the Treatment and Prevention of COVID-19 Infection.

Coronavirus disease-2019 (COVID-19) is caused by coronavirus-2 (SARS-CoV-2) and has produced a global pandemic. As of 22 June 2021, 178 million people have been affected worldwide, and 3.87 million people have died from COVID-19. According to the Centers for Disease Control and Prevention (CDC) of the United States, COVID-19 virus is primarily transmitted between people through respiratory droplets and contact routes. Since the location of initial infection and disease progression is primarily through the lungs, the inhalation delivery of drugs directly to the lungs may be the most appropriate route of administration for treating COVID-19. This review article aims to present possible inhalation therapeutics and vaccines for the treatment of COVID-19 symptoms. This review covers the comparison between SARS-CoV-2 and other coronaviruses such as SARS-CoV/MERS, inhalation therapeutics for the treatment of COVID-19 symptoms, and vaccines for preventing infection, as well as the current clinical status of inhaled therapeutics and vaccines.

In vitro dissolution testing of respirable size anti-tubercular drug particles using a small volume dissolution apparatus.

A dissolution apparatus that uses a small volume of stationary medium (25 µL) has been developed for in vitro dissolution testing of respirable drug particles and used to evaluate the dissolution of two anti-tubercular drugs, moxifloxacin and ethionamide. Solubilities of moxifloxacin and ethionamide in phosphate buffered saline (PBS, pH 7.4) were 17.68 ±â€¯0.85 mg mL-1 and 0.46 ±â€¯0.02 mg mL-1 whereas in the presence of lung surfactant (0.4% w/v Curosurf® in PBS) solubilities were 20.76 ±â€¯0.35 mg mL-1 and 0.56 ±â€¯0.03 mg mL-1, respectively. A fine particle dose (∼50 µg) of aerodynamically separated moxifloxacin or ethionamide particles (<6.4 µm) was collected onto a glass coverslip using a modified Twin Stage Impinger. The dissolution behaviour of the fine particle dose was evaluated at various perfusate flow rates (0.2, 0.4 and 0.8 mL min-1 of PBS), mucus simulant concentrations (1.0, 1.5 and 2.0% w/v polyethylene oxide in PBS), and in the presence of lung surfactant. The dissolution behaviour of the respirable size particles was observed under an optical microscope and the dissolved drug that diffused into the perfusate was quantified by HPLC. The moxifloxacin particles disappeared quickly and showed faster permeation (<30 min) compared to the ethionamide particles at all the dissolution conditions evaluated. This study demonstrated the differences in the dissolution rates of moxifloxacin and ethionamide particles and may be useful to estimate the residence time of the inhaled dry powder particles in the lungs.

A STELLA simulation model for in vitro dissolution testing of respirable size particles.

In vitro dissolution testing is a useful quality control tool to discriminate the formulations and to approximate the in vivo drug release profiles. A dissolution apparatus has been custom-made for dissolution testing of dry powder formulations in a small volume of stationary medium (25 µL spread over 4.91 cm2 area i.e. ~50 µm thick). To understand the system and predict the key parameters which influence the dissolution of respirable size particles, a simulation model was constructed using STELLA modeling software. Using this model, the permeation (dissolution followed by diffusion through the membrane) of two anti-tubercular drugs of differing solubilities, moxifloxacin (17.68 ± 0.85 mg mL-1) and ethionamide (0.46 ± 0.02 mg mL-1), from the respirable size particles and their diffusion from a solution were simulated. The simulated permeation profiles of moxifloxacin from solution and respirable size particles were similar, indicating fast dissolution of the particles. However, the simulated permeation profile of ethionamide from respirable size particles showed slower permeation compared to the solution indicating the slow dissolution of the respirable size particles of ethionamide. The sensitivity analysis suggested that increased mucus volume and membrane thickness decreased the permeation of drug. While this model was useful in predicting and distinguishing the dissolution behaviours of respirable size moxifloxacin and ethionamide, further improvement could be made using appropriate initial parameter values obtained by experiments.

Bedaquiline containing triple combination powder for inhalation to treat drug-resistant tuberculosis.

Drug-resistant tuberculosis (DR-TB) is an emerging health problem, challenging the effective control of global TB. Current treatment of DR-TB includes administration of multiple anti-TB drugs via oral and parenteral routes for a duration of 20-28 months. High systemic exposure, side effects and lengthy treatment time are problems affecting current treatment. The success rate of current lengthy treatment regimens is generally <50%. Bedaquiline, a new anti-TB drug is synergistic with pyrazinamide and in combination with moxifloxacin accelerates sputum-culture conversion. Therefore, a triple combination of these drugs may have the potential to shorten the treatment time and improve treatment success. Additionally, inhalation of these drugs in combination may be advantageous due to the direct delivery to the lungs, possibly reducing systemic exposure. This study aimed to develop an inhalable triple combination powder of bedaquiline, moxifloxacin and pyrazinamide and study their physicochemical properties and safety. An inhalable (aerodynamic diameter: ≤2.4 µm) triple combination powder of bedaquiline, moxifloxacin and pyrazinamide with 20% w/w of L-leucine was prepared using a Buchi Mini Spray-Dryer. Combination powder consisted of spherical and porous particles. In vitro aerosolization (fine particle fraction, FPF) determined using a next generation impactor (NGI) showed improved FPF as a combination powder (>75.0%) when compared to single drug-only formulations (<45.0%). The powder was non-toxic to A549 and Calu-3 cells up to 100 µg/mL and stable at 30 ±â€¯2% RH and ambient room temperature during one-month storage. This is the first study reporting the development of inhalable triple combination powder of bedaquiline, moxifloxacin and pyrazinamide with high aerosolization efficiency. The improved aerosolization may help to deliver a high dose of these drugs to treat drug-resistant tuberculosis.

Crystalline adduct of moxifloxacin with trans-cinnamic acid to reduce the aqueous solubility and dissolution rate for improved residence time in the lungs.

A crystalline adduct of the anti-tubercular drug, moxifloxacin and trans-cinnamic acid (1:1 molar ratio (MCA1:1)) was prepared to prolong the residence time of the drug in the lungs by reducing its solubility and dissolution rate. Whether the adduct is a salt or cocrystal has not been unequivocally determined. Equilibrium solubility and intrinsic dissolution rate measurements for the adduct (MCA1:1) in phosphate buffered saline (PBS, pH 7.4) revealed a significant decrease in the solubility of moxifloxacin (from 17.68 ±â€¯0.85 mg mL-1 to 6.10 ±â€¯0.05 mg mL-1) and intrinsic dissolution rate (from 0.47 ±â€¯0.04 mg cm-2 min-1 to 0.14 ±â€¯0.03 mg cm-2 min-1) compared to the supplied moxifloxacin. The aerosolization behaviour of the adduct from an inhaler device, Aerolizer®, using a Next Generation Impactor showed a fine particle fraction of 30.4 ±â€¯1.2%. The dissolution behaviour of the fine particle dose of respirable particles collected was assessed in a small volume of stationary mucus fluid using a custom-made dissolution apparatus. The respirable adduct particles showed a lower dissolution (microscopic observation) and permeation compared to the supplied moxifloxacin. The crystalline adduct MCA1:1 has a lower solubility and dissolution rate than moxifloxacin and could improve the local residence time and therapeutic action of moxifloxacin in the lungs.

The influence of surface active l-leucine and 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC) in the improvement of aerosolization of pyrazinamide and moxifloxacin co-spray dried powders.

Pharmacotherapy of tuberculosis is potentially more efficient when delivered by the inhaled route than by the current oral and/or parenteral routes due to the higher concentration of drug reaching the primary region of infection in the lungs. This study investigated the influence of the amino acid l-leucine alone and in combination with the phospholipid, 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC), on the aerosolization behaviour of the anti-TB drugs, pyrazinamide and moxifloxacin HCl. Spray dried powders of pyrazinamide (P), moxifloxacin (M) alone and in combination with 10% l-leucine (PL and ML) and 10% DPPC (PLD and MLD) were produced. The particle sizes of all powders except P were in the inhalable size range (<5 µm) but differ in their morphology in presence of the excipients. X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) revealed the migration of surface active l-leucine and DPPC onto the surface of the particles during the spray drying process. The aerosolization from a dry powder inhaler, Aerolizer®, using a Next Generation Impactor revealed fine particle fraction (FPF) values for P, PL and PLD of 18.7 ±â€¯3.4%, 53.0 ±â€¯3.2% and 74.5 ±â€¯5.3% respectively while FPF values for M, ML and MLD were 55.6 ±â€¯3.3%, 74.7 ±â€¯4.7% and 74.1 ±â€¯1.3% respectively. In conclusion, the differences in the aerosolization behaviours of the pyrazinamide and moxifloxacin spray dried powders with and without excipients was a combination of difference in the surface morphology and surface composition.

Development and characterization of high payload combination dry powders of anti-tubercular drugs for treating pulmonary tuberculosis.

This study aimed to develop a high payload dry powder inhalation formulation containing a combination of the first line anti-tubercular drug, pyrazinamide, and the second line drug, moxifloxacin HCl. Individual powders of pyrazinamide (PSD) and moxifloxacin (MSD) and combination powders of the two drugs without (PM) and with 10% l-leucine (PML) and 10% DPPC (PMLD) were produced by spray drying. PSD contained >10 µm crystalline particles and showed poor aerosolization behaviour with a fine particle fraction (FPF) of 18.7 ±â€¯3.4%. PM produced spherical hollow particles with aerodynamic diameter < 5 µm and PML showed improved aerosolization with a high FPF of ~70%. However, PMLD showed a significantly reduced FPF (p > 0.05) compared to PML. Solid state studies and surface elemental analysis by X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry confirmed the surface coating of particles contained amorphous moxifloxacin and both l-leucine and DPPC over crystalline pyrazinamide. Furthermore, pyrazinamide, moxifloxacin, PML and PMLD were found to display low toxicity to both A549 and Calu-3 cell lines even at a concentration of 100 µg/mL. In conclusion, a combination powder formulation of PML has the potential to deliver a high drug dose to the site of infection resulting in efficient treatment.

Lipid-based dispersions of exemestane for improved dissolution rate and intestinal permeability: in vitro and ex vivo characterization.

Current study aimed to develop lipid dispersions of poorly water soluble exemestane by employing lipid carriers such as Gelucire 44/14 and TPGS with porous calcium silicate (PCS) as an adsorbent carrier and formulate into a solid dosage form. The lipid dispersions at 1:5 ratio showed the highest solubility and dissolution compared to pure exemestane. Further, the ex vivo intestinal permeation studies showed improved apparent permeability (Papp, cm/s) of exemestane from the lipid dispersions (GLD1:5 1.3 × 10-2 cm/s; TLD1:5 1.8 × 10-2 cm/s) compared to pure exemestane (0.7 × 10-2 cm/s). The optimized lipid dispersions (GLD1:5 and TLD1:5) were evaluated for scalability to develop into capsules.