Eco-friendly polyurethane acrylate (PUA)/natural filler-based composite as an antifouling product for marine coating.

In the current study, the polyurethane acrylate (PUA) polymer was synthesized by the addition reaction between an isophorone diisocyanate (IPDI) and 2-hydroxyethyl acrylate and cured by polyol. Different properties of the synthesized PUA were determined through diverse analysis methods. The polyurethane acrylate (PUA)/natural filler-based composite (rhizome water extract of Costus speciosus) was prepared as an antifouling agent. The results revealed that the lowest weight loss percentages were detected at 2 wt% PUA/natural filler composite loadings with Escherichia coli (ATCC 23,282) and Pseudomonas aeruginosa (ATCC 10,145). The decreased weight loss percentage may be attributed to the well dispersed natural composite resulting in a slippery surface that can prevent fouling adhesion. It was concluded that the PUA/natural filler composite might be considered an eco-friendly and economical solution to the biofouling problem. KEY POINTS: • A novel strategy for anti-biofouling. • A new composite reduced Gram-negative bacteria.

Synthesis and biodegradation testing of some synthetic oils based on ester.

Synthetic ester oils are widely used in many applications due to their ideal cleaning properties, lubricating performance and assured polarity. The majority of esters oils are more biodegradable. than any other base stock. For instance, oil soluble polyalkyleneglycols (PAGs) or polyalphaolephins (PAOs), are only biodegradable in the lower viscosity grades. The goal of this study is to create some synthetic base oils by two major protocols; the first is esterifying valeric acid with various glycols (ethylene glycol, propylene glycol, butylene glycol and poly (ethylene glycol 400). The second involves esterification of propanoic acid, heptanoic acid, or octanoic acid with ethylene glycol. The reaction yield varies between 85 and 94%. The chemical composition of the prepared esters was examined using various spectroscopic methods (Fourier-transform infrared (FT-IR) and proton nuclear magnetic resonance (1H-NMR) spectroscopy. The thermal properties investigation by thermo gravimetric analysis (TGA) showed pronounced thermal stability of the prepared esters. The biodegradability was verified versus two bacterial isolates (B1, B2). The results showed that percentage of degradation of the lube oil was in the range of 34% to 84% after 3 days of incubation. Moreover, the rheological study revealed that the prepared esters exhibited Newtonian rheological behaviours. Viscosity examination displayed that the esters based on ethylene glycol, such as (A), had the highest VI: 179 values when compared to those based on higher glycols. Viscosity and viscosity index results showed slight increase as the number of carbon atoms in the acid chain increases. At last, most of the synthesized esters possessed pour points ≤ - 32 °C: ≤ - 40 except in case of using higher acids like heptanoic acid and octanoic acid in preparation the pour point increases to - 9 °C and - 15 °C.