RESUMO
BACKGROUND: Anatomic patellar components for total knee arthroplasty (TKA) have demonstrated favorable in vivo kinematics. A novel failure mechanism in TKA patients with an anatomic patellar component was observed prompting an investigation to identify patient- and implant-related factors associated with suboptimal performance. METHODS: A retrospective evaluation was performed comparing 100 TKA patients with an anatomic patellar component to 100 gender-, age-, and body mass index-matched patients with a medialized dome component. All surgeries were performed with the same posterior-stabilized TKA system with minimum of 1-year follow-up. Several radiographic parameters were assessed. A separate computational evaluation was performed using finite-element analysis, comparing bone strain energy density through the patella bone remnant. RESULTS: Patients with an anatomic patellar component had significantly higher rates of anterior knee pain (18 versus 2%, P < .001), chronic effusions (18 versus 2%, P < .001), and superior patellar pole fragmentation (36 versus 13%, P < .001) compared to those with a dome component. Radiographically, the anatomic group demonstrated more lateral patellar subluxation (2.3 versus 1.1 mm, P < .001) and lateral tilt (5.4 versus 4.0 mm, P = .013). Furthermore, there were more revisions in the anatomic group (7 versus 3, P = .331). On computational evaluation, all simulations demonstrated increased bone strain energy density at the superior patellar pole with the anatomic patella. Resection thickness <13 mm resulted in over 2-fold higher strain energy density, and negative resection angle of 7° resulted in 6-fold higher superior pole strain energy. CONCLUSIONS: Patients with an anatomic patellar component showed higher rates of anterior knee pain, chronic effusion, and superior pole fragmentation compared to patients with a dome patella, with higher superior patellar pole strain energy confirmed on computational evaluation. Avoiding higher resection angles and excessive patellar resection may improve the performance and survivorship of the anatomic patella.
Assuntos
Artroplastia do Joelho , Prótese do Joelho , Patela , Humanos , Feminino , Masculino , Artroplastia do Joelho/métodos , Estudos Retrospectivos , Idoso , Patela/cirurgia , Patela/diagnóstico por imagem , Pessoa de Meia-Idade , Radiografia , Fenômenos Biomecânicos , Análise de Elementos Finitos , Articulação do Joelho/cirurgia , Articulação do Joelho/diagnóstico por imagem , Desenho de Prótese , Falha de PróteseRESUMO
BACKGROUND: Malalignment of total knee arthroplasty (TKA) components is a potential cause of clinical failure following TKA. Since the goal of a gap balancing (GB) technique is equal flexion and extension gaps secondary to soft-tissue balancing, and not necessarily component alignment, variation in component placement may exist. Our purpose was (1) to evaluate precision of component alignment in well-functioning GB TKAs performed without the aid of navigation using computed tomographic evaluation and (2) to determine any relationship between femoral version and/or tibial torsion and TKA component positioning. METHODS: There were 93 well-functioning TKAs performed with an extension gap first GB technique with a minimum 2-year follow-up evaluated using computed tomography to assess component rotational alignment, as well as osseous femoral version and tibial torsion. Femoral and tibial rotational alignment was assessed by previously described methods. RESULTS: The mean Knee Society Score was 185.7 ± 21.7. The mean range of motion was 128.5 ± 7.8°. Femoral posterocondylar axis (relative to the transepicondylar axis) values ranged from -8.3 to 4.1° with a mean of -0.78 ± 2.7° (internal rotation). Mean tibial rotation was 17.2 ± 7.9° internal rotation relative to the tibial tubercle. No correlation was found between native femoral version and femoral component rotational alignment (Pearson's correlation coefficient, r, 0.007). Weak correlation was found between native tibial torsion and tibial component alignment (r = 0.24). CONCLUSION: Despite being only a secondary objective with the GB technique, most components evaluated were within the desired range of rotation. Alignment was not influenced by native osseous rotational geometry. LEVEL OF EVIDENCE: Level III, Retrospective Cohort Study.
Assuntos
Artroplastia do Joelho , Prótese do Joelho , Osteoartrite do Joelho , Humanos , Artroplastia do Joelho/métodos , Articulação do Joelho/diagnóstico por imagem , Articulação do Joelho/cirurgia , Estudos Retrospectivos , Fêmur/diagnóstico por imagem , Fêmur/cirurgia , Tíbia/diagnóstico por imagem , Tíbia/cirurgia , Osteoartrite do Joelho/cirurgiaRESUMO
BACKGROUND: Unabated increases in the prevalence of obesity among American adults have disproportionately affected women, Black persons, and Hispanic persons. The purpose of this study was to evaluate for disparity in rates of patient eligibility for primary total hip arthroplasty (THA) and total knee arthroplasty (TKA) based on race and ethnicity and gender by applying commonly used body mass index (BMI) eligibility criteria to two large national databases. METHODS: We retrospectively reviewed data from the American College of Surgeons National Surgical Quality Improvement Program (ACS-NSQIP) database for the years 2015-2019 for primary THA and TKA and the National Health and Nutrition Examination Survey (NHANES) from 2011-2018. Designations of race and ethnicity were standardized between cohorts. BMI cutoffs of <50 kg/m2, <45 kg/m2, <40 kg/m2, and <35 kg/m2 were then applied. Rates of eligibility for surgery were examined for each respective BMI cutoff and stratified by age, race and ethnicity, and gender. RESULTS: 143,973 NSQIP THA patients, 242,518 NSQIP TKA patients, and 13,255 NHANES participants were analyzed. Female patients were more likely to be ineligible for surgery across all cohorts for all modeled BMI cutoffs (P < .001 for all). Black patients had relatively lower rates of eligibility across all cohorts for all modeled BMI cutoffs (P < .0001 for all). Hispanic patients had disproportionately lower rates of eligibility only at a BMI cutoff of <35 kg/m2. CONCLUSION: Using BMI cutoffs alone to determine the eligibility for primary THA and TKA may disproportionally exclude women, Black persons, and Hispanic persons. These data raise concerns regarding further disparity and restriction of arthroplasty care to vulnerable populations that are already marginalized. LEVEL OF EVIDENCE: Retrospective Cohort Study, Level III.
Assuntos
Artroplastia de Quadril , Artroplastia do Joelho , Índice de Massa Corporal , Etnicidade , Feminino , Humanos , Inquéritos Nutricionais , Complicações Pós-Operatórias/epidemiologia , Estudos Retrospectivos , Estados Unidos/epidemiologiaRESUMO
BACKGROUND: Obesity is associated with higher rates of adverse outcomes following primary total hip arthroplasty (THA). The purpose of this study is to utilize 3 national databases to develop projections of obesity within the general population and primary THA patients in the United States through 2029. METHODS: Data from the National Surgical Quality Improvement Program (NSQIP), the Behavior Risk Factor Surveillance System (BRFSS), and the National Health and Nutrition Examination Survey were queried for years 1999-2019. Current Procedural Terminology code 27130 was used to identify primary THA patients in NSQIP. Individuals were categorized according to body mass index (kg/m2) by year: normal weight (≤24.9); overweight (25.0-29.9); obese (30.0-39.9); and morbidly obese (≥40). Multinomial logistic regression was used to project categorical body mass index data for years 2020-2029. RESULTS: A total of 8,222,013 individuals were included (7,986,414 BRFSS, 235,599 NSQIP THA). From 2011 to 2019, the prevalence of normal weight and overweight individuals declined in the general population (BRFSS) and in primary THA. Prevalence of obese/morbidly obese individuals increased in the general population from 31% to 36% and in primary THA from 42% to 49%. Projection models estimate that by 2029, 46% of the general population will be obese/morbidly obese and 55% of primary THA will be obese/morbidly obese. CONCLUSION: By 2029, we estimate ≥55% of primary THA to be obese/morbidly obese. Increased resources dedicated to care pathways and research focused on improving outcomes in obese arthroplasty patients will be necessary as this population continues to grow. LEVEL OF EVIDENCE: Level III, Retrospective Cohort Study.
Assuntos
Artroplastia de Quadril , Obesidade Mórbida , Artroplastia de Quadril/efeitos adversos , Índice de Massa Corporal , Humanos , Inquéritos Nutricionais , Obesidade Mórbida/complicações , Obesidade Mórbida/epidemiologia , Obesidade Mórbida/cirurgia , Sobrepeso/complicações , Complicações Pós-Operatórias/etiologia , Prevalência , Estudos Retrospectivos , Estados Unidos/epidemiologiaRESUMO
BACKGROUND: Obesity is a well-established risk factor for complications following primary total knee arthroplasty (TKA). The purpose of this study is to utilize 3 national databases to develop projections of obesity within the general population and primary TKA patients in the United States through 2029. METHODS: Data from the National Surgical Quality Improvement Program (NSQIP), the Behavior Risk Factor Surveillance System (BRFSS), and the National Health and Nutrition Examination Survey were queried for years 1999-2019. Current Procedural Terminology code 27447 was used to identify primary TKA patients in NSQIP. Individuals were categorized according to body mass index (kg/m2) by year: normal weight (≤24.9); overweight (25.0-29.9); obese (30.0-39.9); and morbidly obese (≥40). Multinomial logistic regression was used to project categorical body mass index data for years 2020-2029. RESULTS: A total of 8,372,221 individuals were included (7,986,414 BRFSS, 385,807 NSQIP TKA). From 2011 to 2019, the prevalence of normal weight and overweight individuals declined in the general population (BRFSS) and in primary TKA. Prevalence of obese/morbidly obese individuals increased in the general population from 31% to 36% and in primary TKA from 60% to 64%. Projection models estimate that by 2029, 46% of the general population will be obese/morbidly obese and 69% of primary TKA will be obese/morbidly obese. CONCLUSION: By 2029, we estimate ≥69% of primary TKA to be obese/morbidly obese. Increased resources dedicated to care pathways and research focused on improving outcomes in obese arthroplasty patients will be necessary as this population continues to grow. LEVEL OF EVIDENCE: Level III, Retrospective Cohort Study.
Assuntos
Artroplastia do Joelho , Obesidade Mórbida , Artroplastia do Joelho/efeitos adversos , Índice de Massa Corporal , Humanos , Inquéritos Nutricionais , Obesidade Mórbida/complicações , Obesidade Mórbida/epidemiologia , Obesidade Mórbida/cirurgia , Sobrepeso/complicações , Complicações Pós-Operatórias/etiologia , Prevalência , Estudos Retrospectivos , Estados Unidos/epidemiologiaRESUMO
BACKGROUND: The use of claims databases for research after total hip and knee arthroplasty (THA, TKA) has increased exponentially. These studies rely on accurate coding, and inadvertent inclusion of patients with nonroutine indications may influence results. The purpose of this study was to evaluate the complexity of THA and TKA captured by CPT code and determine if complication rates vary based on the indication. METHODS: The NSQIP database was queried using CPT codes 21730 and 27447 to identify patients undergoing THA and TKA from 2018 to 2019. The surgical indication was classified based on the ICD-10 diagnosis code as routine primary, complex primary, inflammatory, fracture, oncologic, revision, infection, or indeterminant. Patient factors and 30-day complications, readmission, reoperation, and wound complications were compared. RESULTS: A total of 86,009 THA patients had 703 ICD-10 diagnosis codes and 91.4% were routine primary indications. Complication rates were: routine primary 7.4%, complex primary 11.3%, inflammatory 12.5%, fracture 23.9%, oncologic 32.4%, revision 26.9%, infection 38.7%, and indeterminant 10.3% (P < .0001). 137,500 TKA patients had 552 ICD-10 diagnosis codes and 96.1% were routine primary cases. Complication rates were: routine primary 5.9%, complex primary 8.0%, inflammatory 7.2%, fracture 38.9%, oncologic 32.7%, revision 13.3%, infection 37.7%, and indeterminant 9.6% (P < .0001). Routine primary arthroplasty had significantly lower rates of reoperation, readmission, and wound complications. CONCLUSION: Using CPT code alone captures 10% of THA and 4% of TKA patients with procedures for nonroutine primary indications. It is essential to recognize identification of patients simply by CPT code has the potential to inadvertently introduce bias, and surgeons should critically assess methods used to define the study populations.
Assuntos
Artroplastia de Quadril , Artroplastia do Joelho , Artroplastia de Quadril/efeitos adversos , Artroplastia do Joelho/efeitos adversos , Bases de Dados Factuais , Humanos , Articulação do Joelho , Complicações Pós-Operatórias/epidemiologia , Complicações Pós-Operatórias/etiologia , Reoperação/efeitos adversos , Estudos Retrospectivos , Fatores de RiscoRESUMO
BACKGROUND: In an effort to help combat the COVID-19 pandemic and preserve essential health care resources, starting in mid-March 2020, surgeons have been instructed to only perform essential surgical procedures. The vast majority of hip and knee arthroplasty surgery does not meet the definition of essential surgery. This study estimated the number of arthroplasty procedures that would be canceled because of these important restrictions. METHODS: The US hip and knee arthroplasty procedure volume projections for 2020 were estimated from four recently published studies. Data from the American Joint Replacement Registry were utilized to determine what percentage of these cases would be considered nonessential surgery. Monthly and weekly estimates of nonessential hip and knee arthroplasty procedures that would have occurred had there not been any restrictions due to COVID-19 were calculated. RESULTS: After excluding essential procedures, it was estimated that approximately 30,000 primary and 3000 revision hip and knee arthroplasty procedures will be canceled each week while COVID-19 restrictions regarding nonessential surgery are in place. If only 50% of nonessential cases were actually canceled across the United States, that would still result in the cancellation of 15,001 primary and 1435 revision hip and knee arthroplasty procedures per week while restrictions are in place. CONCLUSION: This study highlights the profound impact COVID-19 is having on our current hip and knee arthroplasty volume. The large number of cases canceled because of COVID-19 translates into major financial losses for health care institutions and may have a profound impact on our patients.
Assuntos
Artroplastia de Quadril/estatística & dados numéricos , Artroplastia do Joelho/estatística & dados numéricos , Betacoronavirus , Infecções por Coronavirus , Pandemias , Pneumonia Viral , COVID-19 , Infecções por Coronavirus/prevenção & controle , Infecções por Coronavirus/transmissão , Humanos , Pandemias/prevenção & controle , Pneumonia Viral/prevenção & controle , Pneumonia Viral/transmissão , Sistema de Registros , SARS-CoV-2 , Estados UnidosRESUMO
BACKGROUND: The United States is in an obesity epidemic. Obesity has multiple common comorbid conditions, including lower extremity arthritis. We sought to examine the course of treatment for a population with body mass index (BMI) ≥40 kg/m2 and osteoarthritis (OA) of the hip or knee. We investigated decision criteria that influenced arthroplasty surgeons to recommend nonoperative management vs total joint arthroplasty (TJA). For those patients who ultimately received TJA, we compared outcomes in this population to those with BMI <40 kg/m2. METHODS: This study retrospectively reviewed 158 new patients with BMI ≥40 kg/m2 and moderate/severe OA of the hip or knee. Demographics, comorbidity profiles, and weight loss were compared between groups that underwent TJA and those that did not. The arthroplasty database was used to identify patients who underwent TJA during 2016-2018 (N = 1473). Comorbidities, readmissions, surgical site infections, and overall complications were compared between those with BMI ≥40 kg/m2 and BMI <40 kg/m2. RESULTS: About 51.3% of new patients with BMI ≥40 kg/m2 and moderate/severe OA did not return for a second clinic visit. Of those who did return, 42.9% eventually underwent surgery. BMI was higher in single visit patients vs those with multiple visits (49.5 vs 46.3 kg/m2, P < .001), no difference in those scheduled on an "as-needed" basis vs a specific return date (P = .18), and did not change significantly during the 2-year follow-up (P = .41). Patients who underwent TJA had a lower mean BMI at presentation than their nonoperative counterparts (44.5 vs 47.6 kg/m2, P < .01) and demonstrated significant weight loss prior to surgery (44.5 vs 42.6 kg/m2, P < .05). When comparing patients with BMI ≥40 kg/m2 vs BMI <40 kg/m2, overall complications were not higher in the BMI ≥40 kg/m2 group, although surgical site infections were higher in those undergoing total hip arthroplasty with BMI ≥40 kg/m2 (0.3% vs 3.1%, P < .05). CONCLUSION: A majority of patients with BMI ≥40 kg/m2 and moderate/advanced OA will be lost to orthopedic follow-up. A relatively lower BMI indicates a greater chance of retention in care, and ultimately surgery, but does not influence surgeons' recommendations to continue orthopedic management. Patients who persist in seeking treatment, lose significant weight, and exhaust nonoperative alternatives may be suitable for TJA despite a BMI ≥40 kg/m2, with an overall complication rate of 4.3%. However, only 9% of patients at 2-year follow-up achieved BMI <40 kg/m2 and only 20% of surgeries were performed on patients who had achieved this proposed cutoff.
Assuntos
Artroplastia de Quadril , Artroplastia do Joelho , Obesidade Mórbida , Artroplastia de Quadril/efeitos adversos , Artroplastia do Joelho/efeitos adversos , Índice de Massa Corporal , Humanos , Obesidade Mórbida/complicações , Obesidade Mórbida/epidemiologia , Obesidade Mórbida/cirurgia , Complicações Pós-Operatórias/epidemiologia , Estudos Retrospectivos , Resultado do Tratamento , Estados UnidosRESUMO
BACKGROUND: Spinopelvic pathology has been identified as a potential risk factor for instability after total hip arthroplasty. Spinopelvic radiographic parameters used to diagnose spinopelvic disease may also impact optimal cup placement. The purpose of this study was to assess the arthroplasty surgeon accuracy in making spinopelvic measurements. METHODS: Five fellowship-trained or in-training arthroplasty surgeons reviewed 44 lateral lumbar radiographs in two sessions. All evaluators were instructed how to perform measurements but had little experience in doing so. Traditional measurements included the pelvic tilt (PT), pelvic incidence (PI), and sacral slope (SS), and novel measurements included the acetabular ante-inclination (AI) and pelvic femoral angle. Surgeon measurements were compared with those made by experienced engineers. intraclass coefficients (ICCs) were calculated and interpreted. RESULTS: The interobserver reliability for 4 of 5 of the spinopelvic parameters was good to excellent (ICC >0.75) with the highest reliability seen for PI measurement (ICC = 0.939). Only moderate interobserver reliability was observed for AI measurement (ICC = 0.559). Intraobserver reliability was the highest for the PI and SS, ranging from moderate to good (ICC, 0.718 to 0.896). The lowest intraobserver reliability was seen for the AI (ICC range, 0.026 to 0.545) and pelvic femoral angle (ICC range, 0.035 to 0.828). Surgeon measurements of PT and SS were compared with engineer measurements with extremely poor correlation observed (ICC <0 for all). CONCLUSION: Surgeon intraobserver and interobserver reliability in making novel radiographic measurements was low compared with traditional radiographic measurements. Surgeon reliability in making traditional measurements of the PT and SS was very poor compared with experienced assessors using software-based measurements.
Assuntos
Artroplastia de Quadril , Acetábulo , Humanos , Radiografia , Reprodutibilidade dos Testes , SacroRESUMO
BACKGROUND: Obesity has been associated with varying adverse outcomes related to total knee arthroplasty (TKA) and has long been associated with various mechanical complications. Computational modeling holds promise for investigating biomechanical aberrations related to TKA in obese patients. However, basic anthropometric information regarding the shape of the lower extremity in obese patients is lacking. We, therefore, developed a method to determine lower extremity shape both generally and subject specific as a function of body mass index (BMI) and sex. METHODS: A unique set of 4 radiographs (knee anteroposterior/lateral; EOS long-leg alignment anteroposterior/lateral) were reviewed for patients with BMI exceeding 30 kg/m2 before undergoing TKA. Soft tissue thickness in both the coronal and sagittal planes, including anterior adipose tissue thickness overlying the tibial tubercle and patella, was measured. Elliptical parameters were then determined for any distance along the lower extremity. Additional measurements were obtained, including prepatellar thickness and pretubercular thickness and anteroposterior and mediolateral dimensions of the proximal tibia. A total of 232 obese subjects were analyzed. RESULTS: Girth increased as a function of BMI. Anterior prepatellar and pretubercular subcutaneous fat thickness in females exceeded that in males for all values of BMI. Wide variation was seen with regard to overall patterns of adiposity among same-sex subjects with similar BMI. Proximal tibial osseous dimensions did not demonstrate an association with BMI; however, males were found to have deeper and wider tibias compared with females. CONCLUSIONS: BMI and sex influence lower extremity shape. The prediction algorithms developed here holds implications for future biomechanical studies of TKA in obese patients.
Assuntos
Antropometria/métodos , Artroplastia do Joelho , Extremidade Inferior/diagnóstico por imagem , Obesidade Mórbida/diagnóstico por imagem , Gordura Subcutânea/diagnóstico por imagem , Idoso , Algoritmos , Índice de Massa Corporal , Feminino , Humanos , Joelho/diagnóstico por imagem , Joelho/cirurgia , Articulação do Joelho/diagnóstico por imagem , Articulação do Joelho/cirurgia , Extremidade Inferior/cirurgia , Masculino , Pessoa de Meia-Idade , Patela/diagnóstico por imagem , Radiografia , Estudos Retrospectivos , Tíbia/diagnóstico por imagem , Tíbia/cirurgiaRESUMO
BACKGROUND: Obesity has previously been demonstrated to be an independent risk factor for increased complications after total hip and knee arthroplasties (THA and TKA). The purpose of this study was to compare the effects of obesity and body mass index (BMI) to determine whether the magnitude of the effect was similar for both procedures. METHODS: We queried the American College of Surgeons National Surgical Quality Improvement Program database to identify patients who underwent primary THA or TKA between 2010 and 2014. Patients were stratified by procedure and classified as nonobese, obese, or morbidly obese according to BMI. Thirty-day rates of wound complications, deep infection, total complications, and reoperation were compared using univariate and multivariate logistic regression analyses. RESULTS: We identified 64,648 patients who underwent THA and 97,137 patients who underwent TKA. Obese THA patients had significantly higher rates of wound complications (1.53% vs 0.96%), deep infection (0.31% vs 0.17%), reoperation rate (2.11% vs 1.02%), and total complications (5.22% vs 4.63%) compared with TKA patients. Morbidly obese patients undergoing THA were also found to have significantly higher rates of wound complications (3.25% vs 1.52%), deep infection (0.84% vs 0.23%), reoperation rate (3.65% vs 1.60%), and total complications (7.36% vs 5.57%). Multivariate regression analysis identified increasingly higher odds of each outcome measure as BMI increased. CONCLUSION: This study demonstrates that the impact of obesity on postoperative complications is more profound for THA than TKA. This emphasizes the importance of considering patient comorbidities in the context of the specific procedure when assessing risks of surgery.
Assuntos
Artroplastia de Quadril/efeitos adversos , Artroplastia do Joelho/efeitos adversos , Obesidade Mórbida/complicações , Complicações Pós-Operatórias/etiologia , Reoperação/estatística & dados numéricos , Idoso , Idoso de 80 Anos ou mais , Índice de Massa Corporal , Comorbidade , Bases de Dados Factuais , Feminino , Humanos , Articulação do Joelho , Masculino , Pessoa de Meia-Idade , Análise Multivariada , Complicações Pós-Operatórias/epidemiologia , Melhoria de Qualidade , Medição de Risco , Fatores de Risco , Estados Unidos/epidemiologiaRESUMO
BACKGROUND: Infection after total knee arthroplasty (TKA) can result in disastrous consequences. Previous research regarding injections and risk of TKA infection have produced conflicting results and in general have been limited by small cohort size. QUESTIONS/PURPOSES: The purpose of this study was to evaluate if intraarticular injection before TKA increases the risk of postoperative infection and to identify if time between injection and TKA affect the risk of TKA infection. METHODS: The Humana data set was reviewed from 2007 to 2014 for all patients who received a knee injection before TKA. Current Procedural Terminology (CPT) codes and laterality modifiers were used to identify patients who underwent knee injection followed by ipsilateral TKA. Postoperative infection within 6 months of TKA was identified using International Classification of Diseases, 9th Revision/CPT codes that represent two infectious endpoints: any postoperative surgical site infection (encompasses all severities of infection) and operative intervention for TKA infection (surrogate for deep TKA infection). The injection cohort was stratified into 12 subgroups by monthly intervals out to 12 months corresponding to the number of months that had elapsed between injection and TKA. Risk of postoperative infection was compared between the injection and no injection cohorts. In total, 29,603 TKAs (35%) had an injection in the ipsilateral knee before the TKA procedure and 54,081 TKA cases (65%) did not. The PearlDiver database does not currently support line-by-line output of patient data, and so we were unable to perform a multivariate analysis to determine whether other important factors may have varied between the study groups that might have had a differential influence on the risk of infection between those groups. However, the Charlson Comorbidity index was no different between the injection and no injection cohorts (2.9 for both) suggesting similar comorbidity profiles between the groups. RESULTS: The proportion of TKAs developing any postoperative infection was higher among TKAs that received an injection before TKA than in those that did not (4.4% versus 3.6%; odds ratio [OR], 1.23; 95% confidence interval [CI], 1.15-1.33; p < 0.001). Likewise, the proportion of TKAs developing infection resulting in return to the operating room after TKA was also higher among TKAs that received an injection before TKA than those that did not (1.49% versus 1.04%; OR, 1.4; 95% CI, 1.3-1.63; p < 0.001). Month-by-month analysis of time between injection and TKA revealed the odds of any postoperative infection remained higher for the injection cohort out to a duration of 6 months between injection and TKA (ORs ranged 1.23 to 1.46 when 1-6 months between injection and TKA; p < 0.05 for all) as did the odds of operative intervention for TKA infection when injection occurred within 7 months of TKA (OR ranged from 1.38 to 1.88 when 1-7 months between injection and TKA; p < 0.05 for all). When the duration between injection and TKA was longer than 6 or 7 months, the ORs were no longer elevated at these endpoints, respectively. CONCLUSIONS: Injection before TKA was associated with a higher risk of postoperative infection and appears to be time-dependent with closer proximity between injection and TKA having increased odds of infection. Further research is needed to better evaluate the risk injection before TKA poses for TKA infection; a more definitive relationship could be established with a multivariate analysis to control for other known risk factors for TKA infection. LEVEL OF EVIDENCE: Level III, therapeutic study.
Assuntos
Artroplastia do Joelho/efeitos adversos , Injeções Intra-Articulares/efeitos adversos , Articulação do Joelho/cirurgia , Infecção da Ferida Cirúrgica/etiologia , Adulto , Idoso , Idoso de 80 Anos ou mais , Distinções e Prêmios , Bases de Dados Factuais , Feminino , Humanos , Prótese do Joelho , Masculino , Pessoa de Meia-Idade , Estudos Retrospectivos , Fatores de Risco , Resultado do TratamentoRESUMO
BACKGROUND: Positioning of total hip bearings involves tradeoffs, because cup orientations most favorable in terms of stability are not necessarily ideal in terms of reduction of contact stress and wear potential. Previous studies and models have not addressed these potentially competing considerations for optimal total hip arthroplasty (THA) function. QUESTIONS/PURPOSES: We therefore asked if component positioning in total hips could be addressed in terms of balancing bearing surface wear and stability. Specifically, we sought to identify acetabular component inclination and anteversion orientation, which simultaneously resulted in minimal wear while maximizing construct stability, for several permutations of femoral head diameter and femoral stem anteversion. METHODS: A validated metal-on-metal THA finite element (FE) model was used in this investigation. Five dislocation-prone motions as well as gait were considered as were permutations of femoral anteversion (0°-30°), femoral head diameter (32-48 mm), cup inclination (25°-75°), and cup anteversion (0°-50°), resulting in 4320 distinct FE simulations. A novel metric was developed to identify a range of favorable cup orientations (so-called "landing zone") by considering both surface wear and component stability. RESULTS: When considering both wear and stability with equal weight, ideal cup position was more restrictive than the historically defined safe zone and was substantially more sensitive to cup anteversion than to inclination. Ideal acetabular positioning varied with both femoral head diameter and femoral version. In general, ideal cup inclination decreased with increased head diameter (approximately 0.5° per millimeter increase in head diameter). Additionally, ideal inclination increased with increased values of femoral anteversion (approximately 0.3° per degree increase in stem anteversion). Conversely, ideal cup anteversion increased with increased femoral head diameter (0.3° per millimeter increase) and decreased with increased femoral stem anteversion (approximately 0.3° per degree increase). Regressions demonstrated strong correlations between optimal cup inclination versus head diameter (Pearson's r=-0.88), between optimal cup inclination versus femoral anteversion (r=0.96), between optimal cup anteversion versus head diameter (r=0.99), and between optimal cup anteversion and femoral anteversion (r=-0.98). For a 36-mm cup with a 20° anteverted stem, the ideal cup orientation was 46°±12° inclination and 15°±4° anteversion. CONCLUSIONS: The range of cup orientations that maximized stability and minimized wear (so-called "landing zone") was substantially smaller than historical guidelines and specifically did not increase with increased head size, challenging the presumption that larger heads are more forgiving. In particular, when the cup is oriented to improve not only stability, but also wear in the model, there was little or no added stability achieved by the use of larger femoral heads. Additionally, ideal cup positioning was more sensitive to cup anteversion than to inclination. CLINICAL RELEVANCE: Positioning THA bearings involves tradeoffs regarding stability and long-term bearing wear. Cup positions most favorable to minimization of wear such as low inclination and elevated anteversion were detrimental in terms of construct stability. Orientations were identified that best balanced the competing considerations of wear and stability.
Assuntos
Artroplastia de Quadril , Ajuste de Prótese , Distinções e Prêmios , Análise de Elementos Finitos , Prótese de Quadril , Humanos , Próteses Articulares Metal-Metal , Próteses e Implantes , Desenho de PróteseRESUMO
BACKGROUND: Large-diameter femoral heads for metal-on-metal THA hold theoretical advantages of joint stability and low bearing surface wear. However, recent reports have indicated an unacceptably high rate of wear-associated failure with large-diameter bearings, possibly due in part to increased wear at the trunnion interface. Thus, the deleterious consequences of using large heads may outweigh their theoretical advantages. QUESTIONS/PURPOSES: We investigated (1) to what extent femoral head size influenced stability in THA for several dislocation-prone motions; and the biomechanics of wear at the trunnion interface by considering the relationship between (2) wear potential and head size and (3) wear potential and other factors, including cup orientation, type of hip motion, and assembly/impaction load. METHODS: Computational simulations were executed using a previously validated nonlinear contact finite element model. Stability was determined at 36 cup orientations for five distinct dislocation challenges. Wear at the trunnion interface was calculated for three separate cup orientations subjected to gait, stooping, and sit-to-stand motions. Seven head diameters were investigated: 32 to 56 mm, in 4-mm increments. RESULTS: Stability improved with increased diameter, although diminishing benefit was seen for sizes of greater than 40 mm. By contrast, contact stress and computed wear at the trunnion interface all increased unabatedly with increasing head size. Increased impaction forces resulted in only small decreases in trunnion wear generation. CONCLUSIONS: These data suggest that the theoretical advantages of large-diameter femoral heads have a limit. Diameters of greater than 40 mm demonstrated only modest improvement in terms of joint stability yet incurred substantial increase in wear potential at the trunnion. CLINICAL RELEVANCE: Our model has potential to help investigators and designers of hip implants to better understand the optimization of trunnion design for long-term durability.
Assuntos
Artroplastia de Quadril/efeitos adversos , Artroplastia de Quadril/instrumentação , Simulação por Computador , Cabeça do Fêmur/cirurgia , Articulação do Quadril/cirurgia , Prótese de Quadril , Instabilidade Articular/etiologia , Próteses Articulares Metal-Metal , Falha de Prótese , Fenômenos Biomecânicos , Desenho Assistido por Computador , Análise de Elementos Finitos , Articulação do Quadril/fisiopatologia , Humanos , Instabilidade Articular/fisiopatologia , Dinâmica não Linear , Desenho de Prótese , Estresse Mecânico , Resultado do TratamentoRESUMO
Background Direct anterior total hip arthroplasty (DA-THA) has increased in popularity over recent decades. However, DA-THA has been reported to have a higher incidence of superficial wound complications, including infection and incisional dehiscence, compared to other surgical approaches to hip arthroplasty. While this indicates a need for optimal wound closure, little research exists on the preferred method of skin closure following DA-THA. This study aimed to determine if there was any difference in rates of superficial infection, wound dehiscence, or overall wound complications with skin closure using a running subcuticular 3-0 Monocryl® suture compared to surgical staples following DA-THA. Methods Records of patients who underwent DA-THA at our institution between July 2017 to July 2022 were retrospectively reviewed. Data were abstracted on patient demographics, comorbidities, skin closure method, and wound complications from the electronic medical record. Superficial infection and wound dehiscence were classified based on explicit diagnosis in post-operative records and incision photographs taken during follow-up visits. Overall wound complications were classified in patients who experienced either superficial infection, incisional dehiscence, or both complications following surgery. Descriptive statistics and chi-squared measures were obtained from post-operative patient data, and significance was set at p [Formula: see text] 0.05. Results A total of 365 DA-THAs were completed in 349 patients. A running subcuticular 3-0 Monocryl® suture closed 207 surgeries (56.7%), while surgical staples closed 158 surgeries (43.3%). There was no significant difference in independent rates of superficial infection (p = 0.076) or wound dehiscence (p = 0.118) between suture and staple cohorts; however, suture closure (10, 2.7%) was associated with a significantly higher rate of overall wound complications compared to staple closure (1, 0.3%) (p = 0.020). Conclusion DA-THA carries the risk of overall wound complications, including superficial infection and wound dehiscence. Our findings suggest superficial skin closure with staples may be preferred over sutures due to lower rates of overall wound complications. Further studies are needed to determine the optimal method of skin closure following DA-THA.
RESUMO
Background: 30-day readmission is an important quality metric evaluated following primary total joint arthroplasty (TJA) that has implications for hospital performance and reimbursement. Differences in how 30-day readmissions are defined between Centers for Medicare and Medicaid Services (CMS) and other quality improvement programs (i.e., National Surgical Quality Improvement Program [NSQIP]) may create discordance in published 30-day readmission rates. The purpose of this study was to evaluate 30-day readmission rates following primary TJA using two different temporal definitions. Methods: Patients undergoing primary total hip and primary total knee arthroplasty at a single academic institution from 2015-2020 were identified via common procedural terminology (CPT) codes in the electronic medical record (EMR) and institutional NSQIP data. Readmissions that occurred within 30 days of surgery (consistent with definition of 30-day readmission in NSQIP) and readmissions that occurred within 30 days of hospital discharge (consistent with definition of 30-day readmission from CMS) were identified. Rates of 30-day readmission and the prevalence of readmission during immortal time were calculated. Results: In total, 4,202 primary TJA were included. The mean hospital length of stay (LOS) was 1.79 days. 91% of patients were discharged to home. 30-day readmission rate using the CMS definition was 3.1% (130/4,202). 30-day readmission rate using the NSQIP definition was 2.7% (113/4,202). Eight readmissions captured by the CMS definition (6.1%) occurred during immortal time. Conclusion: Differences in temporal definitions of 30-day readmission following primary TJA between CMS and NSQIP results in discordant rates of 30-day readmission. Level of Evidence: III.
Assuntos
Artroplastia de Quadril , Artroplastia do Joelho , Centers for Medicare and Medicaid Services, U.S. , Readmissão do Paciente , Melhoria de Qualidade , Humanos , Readmissão do Paciente/estatística & dados numéricos , Artroplastia do Joelho/estatística & dados numéricos , Estados Unidos , Feminino , Masculino , Idoso , Pessoa de Meia-Idade , Estudos RetrospectivosRESUMO
Objectives: Resident synovial macrophages (RSM) provide immune sequestration of the joint space and are likely involved in initiation and perpetuation of the joint-specific immune response. We sought to identify RSM in synovial fluid (SF) and demonstrate migratory ability, in additional to functional changes that may perpetuate a chronic inflammatory response within joint spaces. Methods: We recruited human patients presenting with undifferentiated arthritis in multiple clinical settings. We used flow cytometry to identify mononuclear cells in peripheral blood and SF. We used a novel transwell migration assay with human ex-vivo synovium obtained intra-operatively to validate flow cytometry findings. We used single cell RNA-sequencing (scRNA-seq) to further identify macrophage/monocyte subsets. ELISA was used to evaluate the bone-resorption potential of SF. Results: We were able to identify a rare population of CD14dim, OPG+, ZO-1+ cells consistent with RSM in SF via flow cytometry. These cells were relatively enriched in the SF during infectious processes, but absolutely decreased compared to healthy controls. Similar putative RSM were identified using ex vivo migration assays when MCP-1 and LPS were used as migratory stimulus. scRNA-seq revealed a population consistent with RSM transcriptionally related to CD56+ cytotoxic dendritic cells and IDO+ M2 macrophages. Conclusion: We identified a rare cell population consistent with RSM, indicating these cells are likely migratory and able to initiate or coordinate both acute (septic) or chronic (autoimmune or inflammatory) arthritis. RSM analysis via scRNA-seq indicated these cells are M2 skewed, capable of antigen presentation, and have consistent functions in both septic and inflammatory arthritis.
RESUMO
BACKGROUND: Hypothesized risk factors for fracture of ceramic liners include impingement, edge-loading, and cup malpositioning. These risk factors are similar to those for generation of stripe wear. However, it is unclear whether the biomechanical conditions contributing to stripe wear generation also increase the risk for ceramic liner fracture QUESTIONS/PURPOSES: We asked whether (1) head stripe wear propensity; and (2) cup orientation would correlate with alumina liner fracture risk for instances of normal and elevated body weight. METHODS: An eXtended Finite Element Method (XFEM) model was developed to investigate these mechanisms. Liner fracture risk for 36-mm alumina bearings was studied by simulating two fracture-prone motions: stooping and squatting. Twenty-five distinct cup orientations were considered with variants of both acetabular inclination and anteversion. Four separate body mass indices were considered: normal (25 kg/m(2)) and three levels of obesity (33, 42, and 50 kg/m(2)). Material properties were modified to simulate alumina with and without the presence of dispersed microflaws. The model was validated by corroboration with two previously published ceramic liner fracture studies. RESULTS: Of 200 XFEM simulations with flaw-free alumina, fracture occurred in eight instances, all of them involving obesity. Each of these occurred with cups in ≤ 37° inclination and in 0° anteversion. For 200 corresponding simulations with microflawed alumina, fracture propensity was greatest for cups with higher (edge loading-associated) scraping wear. Fracture risk was greatest for cups with lower inclination (average 42° for fractured cases versus 48° for nonfractured cases) and lower anteversion (9° versus 20°). CONCLUSIONS: Fracture propensity for 36-mm liners was elevated for cups with decreased anteversion and/or inclination and under conditions of patient obesity. CLINICAL RELEVANCE: Factors causing stripe wear, including obesity and cup malpositioning, also involve increased risk of ceramic liner fracture and merit heightened concern.
Assuntos
Artroplastia de Quadril , Prótese de Quadril , Obesidade/complicações , Falha de Prótese/etiologia , Acetábulo/cirurgia , Cerâmica , Simulação por Computador , Análise de Falha de Equipamento , Humanos , Modelos Teóricos , Desenho de Prótese , Fatores de RiscoRESUMO
BACKGROUND: Obesity has reached epidemic proportions in the United States. Recently, obesity, especially morbid obesity, has been linked to increased rates of dislocation after THA. The reasons are unclear. Soft tissue engagement caused by increased thigh girth has been proposed as a possible mechanism for decreased joint stability. QUESTIONS/PURPOSES: We asked (1) whether thigh soft tissue impingement could decrease THA stability, and if so, at what level of BMI this effect might become evident; and (2) how THA construct factors (eg, head size, neck offset, cup abduction) might affect stability in the morbidly obese. METHODS: The obesity effect was explored by augmenting a physically validated finite element model of a total hip construct previously comprising just implant hardware and periarticular (capsular) soft tissue. The model augmentation involved using anatomic and anthropometric data to include graded levels of increased thigh girth. Parametric computations were run to assess joint stability for two head sizes (28 and 36 mm), for normal versus high neck offset, and for multiple cup abduction angles. RESULTS: Thigh soft tissue impingement lowered the resistance to dislocation for BMIs of 40 or greater. Dislocation risk increased monotonically above this threshold as a function of cup abduction angle, independent of hardware impingement events. Increased head diameter did not substantially improve joint stability. High-offset necks decreased the dislocation risk. CONCLUSIONS: Excessive obesity creates conditions that compromise stability of THAs. Given such conditions, our model suggests reduced cup abduction, high neck offset, and full-cup coverage would reduce the risks of dislocation events.