The 10,000-year biocultural history of fallow deer and its implications for conservation policy.

Over the last 10,000 y, humans have manipulated fallow deer populations with varying outcomes. Persian fallow deer (Dama mesopotamica) are now endangered. European fallow deer (Dama dama) are globally widespread and are simultaneously considered wild, domestic, endangered, invasive and are even the national animal of Barbuda and Antigua. Despite their close association with people, there is no consensus regarding their natural ranges or the timing and circumstances of their human-mediated translocations and extirpations. Our mitochondrial analyses of modern and archaeological specimens revealed two distinct clades of European fallow deer present in Anatolia and the Balkans. Zooarchaeological evidence suggests these regions were their sole glacial refugia. By combining biomolecular analyses with archaeological and textual evidence, we chart the declining distribution of Persian fallow deer and demonstrate that humans repeatedly translocated European fallow deer, sourced from the most geographically distant populations. Deer taken to Neolithic Chios and Rhodes derived not from nearby Anatolia, but from the Balkans. Though fallow deer were translocated throughout the Mediterranean as part of their association with the Greco-Roman goddesses Artemis and Diana, deer taken to Roman Mallorca were not locally available Dama dama, but Dama mesopotamica. Romans also initially introduced fallow deer to Northern Europe but the species became extinct and was reintroduced in the medieval period, this time from Anatolia. European colonial powers then transported deer populations across the globe. The biocultural histories of fallow deer challenge preconceptions about the divisions between wild and domestic species and provide information that should underpin modern management strategies.

Mobility and kinship in the world's first village societies.

Around 10,000 y ago in southwest Asia, the cessation of a mobile lifestyle and the emergence of the first village communities during the Neolithic marked a fundamental change in human history. The first communities were small (tens to hundreds of individuals) but remained semisedentary. So-called megasites appeared soon after, occupied by thousands of more sedentary inhabitants. Accompanying this shift, the material culture and ancient ecological data indicate profound changes in economic and social behavior. A shift from residential to logistical mobility and increasing population size are clear and can be explained by either changes in fertility and/or aggregation of local groups. However, as sedentism increased, small early communities likely risked inbreeding without maintaining or establishing exogamous relationships typical of hunter-gatherers. Megasites, where large populations would have made endogamy sustainable, could have avoided this risk. To examine the role of kinship practices in the rise of megasites, we measured strontium and oxygen isotopes in tooth enamel from 99 individuals buried at Pinarbasi, Boncuklu, and Çatalhöyük (Turkey) over 7,000 y. These sites are geographically proximate and, critically, span both early sedentary behaviors (Pinarbasi and Boncuklu) and the rise of a local megasite (Çatalhöyük). Our data are consistent with the presence of only local individuals at Pinarbasi and Boncuklu, whereas at Çatalhöyük, several nonlocals are present. The Çatalhöyük data stand in contrast to other megasites where bioarchaeological evidence has pointed to strict endogamy. These different kinship behaviors suggest that megasites may have arisen by employing unique, community-specific kinship practices.

A systematic review of the evidence of how hospitals capture financial benefits of process improvement and the impact on hospital financial performance.

BACKGROUND: Governments, funders and hospital managers around the world are looking for ways to address the continual growth in expenditure by reducing the level of waste in the healthcare delivery system and improving the value of care provided to patients. Process improvement methods are applied to increase high value care, reduce low value care and remove waste from care processes. The purpose of this study is to review the literature to identify the methods used by hospitals to measure and capture financial benefits from PI initiatives to identify best practice. The review also pursues the way hospitals collate these benefits at the enterprise level to achieve improved financial performance. METHODS: A systematic review was undertaken in line with the PRISMA process and employed qualitative research methods. Databases searched were Medline, Cochrane Library, Cumulative Index to Nursing and Allied Health Literature (CINHAL), Web of Science and SCOPUS. The initial search was conducted in in July 2021 with a follow up search conducted in February 2023 using the same search terms and databases to identify additional studies published in the intervening period. The search terms were identified through the PICO (Participants, Interventions, Comparisons and Outcomes) method. RESULTS: Seven papers were identified that reported reduction in care process waste or improvement of the value of care using an evidence-based PI approach and included financial benefits analysis. Positive financial impact was measured for the PI initiatives but none of the studies reported how these financial benefits were captured or applied at the enterprise level. Three of the studies suggested that sophisticated cost accounting systems were required to enable this. CONCLUSION: The study demonstrates the paucity of literature in the field of PI and financial benefits measurement in healthcare. Where financial benefits are documented, they vary in terms of cost inclusions and the 'level' at which the costs were measured. Further research on best practice financial measurement methods is needed to enable other hospitals to measure and capture financial benefits arising from their PI programs.

Exploring digital technologies used in the design and manufacture of craniofacial implant surgical guides: A scoping review.

STATEMENT OF PROBLEM: Unlike intraoral implants, digitally planned surgical templates used for guiding the ideal position of the craniofacial implants are not well established, and clear methods and guidelines for their design and construction are lacking. PURPOSE: The purpose of this scoping review was to identify the publications that used a full or partial computer-aided design and computer-aided manufacture (CAD-CAM) protocol to create a surgical guide that achieves the correct positioning of craniofacial implants to retain a silicone facial prosthesis. MATERIAL AND METHODS: A systematic search was conducted in MEDLINE/PubMed, Web of Science, Embase, and Scopus for articles published before November 2021 in the English language. Articles needed to satisfy the eligibility criterion of in vivo articles that created a surgical guide with digital technology for inserting titanium craniofacial implants to hold a silicone facial prosthesis. Articles that inserted implants in the oral cavity or upper alveolus only and articles that did not describe the structure and retention of the surgical guide were excluded. RESULTS: Ten articles were included in the review; all were clinical reports. Two of the articles used a CAD-only approach alongside a conventionally constructed surgical guide. Eight articles described applying a complete CAD-CAM protocol for the implant guides. The digital workflow varied considerably depending on the software program, design, and retention of guides. Only 1 report described a follow-up scanning protocol to verify the accuracy of the final implant positions compared with the planned positions. CONCLUSIONS: Digitally designed surgical guides can be an excellent adjunct to accurately place titanium implants in the craniofacial skeleton for support of silicone prostheses. A sound protocol for the design and retention of the surgical guides will enhance the use and accuracy of craniofacial implants in prosthetic facial rehabilitation.

Overview of incorporation of inorganic antimicrobial materials in denture base resin: A scoping review.

STATEMENT OF PROBLEM: Dental hygiene for institutionalized patients and recurring Candida-associated denture stomatitis remain problematic because of a patient's limited dexterity or inability to eliminate Candida from denture surfaces. Although there has been extensive research into antimicrobial modification of denture base resins with inorganic materials, scoping reviews of the literature to identify knowledge gaps or efficacy of inorganic antimicrobial materials in denture base resins are lacking. PURPOSE: The purpose of this scoping review was to provide a synopsis of the efficacy of the major classes of inorganic antimicrobial materials currently incorporated into denture base resins. MATERIAL AND METHODS: The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) extension for scoping reviews was applied. Four electronic databases, including Embase, PubMed, Web of Science, and Google Scholar, were accessed for articles in the English language, up to February 2019, without restrictions on the date of publication. RESULTS: From the 53 articles selected, 25 distinguishable inorganic materials were found and divided into 3 subgroups. Forty-three articles evaluated nanomaterials, where mostly silver ion nanoparticles and/or titanium dioxide nanoparticles were incorporated into denture base resins. Fourteen articles examined antimicrobial drugs and medications, including azole group medications, amphotericin-B, Bactekiller, chlorhexidine, Novaron, and Zeomic. Two articles classified as others explored hydroxyapatite- and fiber-incorporated denture base resins. CONCLUSIONS: Although nanotechnology and antimicrobial medications or drugs have been successfully used to reduce Candida-associated denture stomatitis, long-term solutions are still lacking, and their disadvantages continue to outweigh their advantages.

Sources of occupational stress amongst dentistry academics.

BACKGROUND: Dentistry professionals may experience significantly higher occupational stress than other health professionals and dentistry academics may have specific work content and context sources of stress. AIMS: The aim of this study is to identify common sources of occupational stress, and how these are associated with wellbeing, in dentistry academics. MATERIALS & METHODS: A cross-sectional online survey with staff in Dentistry departments in Australia and New Zealand. Assessment included 23 items from five general domains of occupational stress from the NIOSH-Generic Job Stress Questionnaire, a 23-item list of sources of stress and the 22-item Psychological General Well-Being Index. Analyses used descriptive statistics and multiple linear regression. RESULTS: A total of 107 respondents (average age 50 ± 11.7 years, 56.8% men) completed the survey. Leading sources of occupational stress were job future, time pressure at work, work overload, and administration demands. A multiple linear regression model significantly predicted wellbeing, F(8,77) = 13.141, p = .000, adj.R2  = .53, but there were no significant associations for any of the specific sources of stress. CONCLUSION: The combination of time pressure, workload and responsibility, job dissatisfaction, low social support, and uncertain job future was inversely associated with wellbeing amongst these dentistry academics. Future studies should consider the development and evaluation of interventions to address these concerns.

Changes in Spina Bifida Lesion Level after Folic Acid Fortification in the US.

OBJECTIVE: To assess whether the severity of cases of spina bifida changed after the institution of mandatory folic acid fortification in the US. STUDY DESIGN: Six active population-based birth defects programs provided data on cases of spina bifida for 1992-1996 (prefortification period) and 1999-2016 (postfortification period). The programs contributed varying years of data. Case information included both a medical record verbatim text description of the spina bifida diagnosis and spina bifida codes (International Classification of Diseases, Clinical Modification, or a modified birth defects surveillance coding system). Comparing the prefortification and postfortification periods, aORs for case severity (upper-level lesions [cervical, thoracic] vs lower-level lesions [lumbar, sacral]) and prevalence ratios (PRs) were estimated. RESULTS: A total of 2593 cases of spina bifida (out of 7 816 062 live births) met the inclusion criteria, including 573 cases from the prefortification period and 2020 cases from the postfortification period. Case severity decreased by 70% (aOR, 0.30; 95% CI, 0.26-0.35) between the fortification periods. The decrease was most pronounced for non-Hispanic White mothers. Overall spina bifida prevalence declined by 23% (PR, 0.77; 95% CI, 0.71-0.85), with similar reductions seen across the early, mid, and recent postfortification periods. A statistically significant decrease in upper-level lesions occurred in the postfortification period compared with the prefortification period (PR, 0.28; 95% CI, 0.22-0.34), whereas the prevalence of lower-level lesions remained relatively similar (PR, 0.94; 95% CI, 0.84-1.05). CONCLUSIONS: The severity of spina bifida cases decreased after mandatory folic acid fortification in the US. Further examination is warranted to better understand the potential effect of folic acid on spina bifida severity.

A technical and clinical digital approach to the altered cast technique with an intraoral scanner and polyvinyl siloxane impression material.

This technique digitalizes the clinical and laboratory steps of fabricating removable partial dentures (RPDs) with the altered cast technique. An intraoral scanner was used to capture the mandibular Kennedy class II partially edentulous arch. An RPD framework was fabricated digitally and then combined with a custom tray with a wax occlusal rim. A conventional polyvinyl siloxane altered cast impression was made and then digitalized both intraorally and extraorally, followed by a digital interocclusal record. The resulting scan was modified to produce an additively manufactured cast. The teeth and gingival components were then designed and fabricated with a combination of additive and subtractive manufacturing, followed by the conventional acrylic resin pour technique. The definitive prosthesis was completed with minimal conventional techniques and without the use of gypsum, prefabricated teeth, or a physical articulator. The technique reduces the number of appointments and achieves the functional extension of the prosthesis through border molding, which is not possible with intraoral scanning.

Trueness assessment of additively manufactured maxillary complete denture bases produced at different orientations.

STATEMENT OF PROBLEM: The trueness of the intaglio surface of an additively manufactured maxillary denture base may be influenced by the build orientation and the inclusion of support struts. PURPOSE: The purpose of this in vitro study was to compare the trueness of a photopolymer additively manufactured maxillary complete denture base created at different orientations with different support strut designs. Optimizing the build is critical for adopting best practice when fabricating maxillary complete dentures through additive manufacturing techniques. MATERIAL AND METHODS: Denture bases (N=70) were additively manufactured at 5 different build orientations (0-, 15-, 45-, 60-, and 90-degrees) with 10 specimens per orientation. Another 2 groups of 10 were manufactured by using the optimal printing orientation with and without support struts. The denture bases were scanned after storage in artificial saliva at 37 °C, and the scan data were analyzed with a 3D metrology software program. Statistical differences were determined with 1-way analysis of variance (ANOVA) and the Kruskal-Wallis test (α=.05). Color deviation heat maps were used to determine areas of clinically significant dimensional errors. RESULTS: Significant differences were found among groups for positive mean deviation (F=44.09, P<.001), negative mean deviation (F=11.69, P<.001), and root mean square deviation (F=17.11, P<.001) for the different orientations. One-way ANOVA revealed significant differences with the use of support struts in relation to negative mean deviation (F=3.857, P<.001) and RMSE (F=11.215, P<.001) and positive mean deviation (Kruskal-Wallis H=0.070, P=.007). The color deviation maps showed that a 45- to 90-degree print orientation was truest overall and that the addition of support struts to the cameo and intaglio surfaces improved the trueness of the maxillary denture bases. CONCLUSIONS: The build orientation and inclusion of support struts influenced the accuracy of the intaglio surface of additively manufactured maxillary denture bases. A 45- to 90-degree build orientation with support struts on the cameo and intaglio surfaces resulted in the truest denture base.

Design of a communication skills course in dentistry: Applying active-learning strategies to improve educational outcomes.

PURPOSE/OBJECTIVE: Effective communication, between patient and dentist, is a core clinical skill that commands dedicated pedagogy similar to that of developing scientific knowledge and psychomotor skills. This study aimed to describe active-learning strategies in a dental communication skills course, which sits within a broader foundation dental course and evaluate students' educational outcomes. METHODS: This is a two-phase retrospective, mono-centred study, completed in 2019 at an Australian dental school. Phase I, a case report, describes the Communication Skills for Oral Health (CSOH) course design and its active-learning strategies. Phase II analysed data from the course using Kirkpatrick's evaluation model to objectively measure the impact of the course and provide feedback to education designer. Students' perception (Level 1) was evaluated with an institutional, validated online survey. Descriptive and statistical analysis, included paired tests and Spearman's correlation analyses, used to investigate learning effect (Level 2) and student behaviour change (Level 3). To assess the impact of the CSOH course design (Level 4) the student grades from the course were analysed. RESULTS: The CSOH course encompasses three major topics: Essentials of Communication Skills, Professional-Patient Relationship and Managing Difficult Situations. Each topic included didactic content complimented with a variety of active-learning strategies to teach and assess students. Positive outcomes were recorded across all Kirkpatrick levels. CONCLUSIONS: This study suggests an efficient communication skills course design, which may assist in the development of communication skills courses in other dental education institutions.

Time trends, geographic variation and risk factors for gastroschisis in Canada: A population-based cohort study 2006-2017.

BACKGROUND: Previous studies showed increases in rates of gastroschisis in Canada in the first decade of the 21st century. OBJECTIVE: We sought to examine the epidemiologic characteristics of gastroschisis in Canada in recent years. METHODS: We conducted a retrospective population-based cohort study of all livebirths and stillbirths delivered in Canada (excluding Quebec) from 2006 to 2017, with information obtained from the Canadian Institute for Health Information. Gastroschisis rates by maternal age, region of residence, and maternal and infant characteristics were quantified using prevalence rate ratios (RR) and 95% confidence intervals (CI). Log-binomial regression was used to quantify the associations between risk factors and gastroschisis. RESULTS: There were 1314 gastroschisis cases among 3 364 116 births. The prevalence rate was 3.7 per 10 000 total births in 2006 and 3.4 per 10 000 total births in 2017, with substantial annual variation in rates. The proportion of mothers aged 20-24 years decreased from 16.5% in 2006 to 11.3% in 2017, while the proportion of mothers aged <20 years halved from 4.8% to 2.3%. The prevalence of gastroschisis at birth remained unchanged among mothers aged <20, 20-24 and 30-49 years but increased among mothers aged 25-29 years. The age-adjusted prevalence rate of gastroschisis increased across the period (for 2016-2017 versus 2006-2007 rate ratio [RR] 1.28, 95% CI 1.05, 1.56), and there was substantial regional variation. Risk factors included problematic use of substances (RR 2.61, 95% CI 2.01, 3.39) and hypothyroidism (RR 2.76, 95% CI 1.56, 4.88). There was a North-to-South difference in gastroschisis prevalence (adjusted RR Far North compared with South 1.54, 95% CI 1.11, 2.15). CONCLUSION: Gastroschisis birth prevalence rates in Canada have stabilised in recent years compared with the increase documented previously. The substantial geographic variation and North-to-South difference in gastroschisis prevalence may indicate variation in socio-economic status, lifestyle and nutritional patterns.

Incorporation of antimicrobial agents in denture base resin: A systematic review.

STATEMENT OF PROBLEM: Denture base resins (DBRs), such as polymethyl methacrylate, are commonly used in the fabrication of removable dentures because of their physical, mechanical, and esthetic properties. However, the denture base acts as a substrate for microorganism adherence and biofilm formation, which may lead to denture stomatitis and be further complicated by fungal infections, of especial importance with geriatric and immunosuppressed patients. Therefore, methods to enhance the antimicrobial property of DBRs will be beneficial. PURPOSE: The purpose of this systematic review was to evaluate the literature on the antimicrobial activity of DBRs incorporating antimicrobial agents or materials. MATERIAL AND METHODS: A search of English peer-reviewed literature up to February 2019 reporting on antimicrobial activity of DBRs with respect to antimicrobial agents or materials, antimicrobial test effects and methods, and conclusion or knowledge gaps was conducted by using Embase, Google Scholar, PubMed, and Web of Science databases. Search terms included denture base resin and antibacterial, denture base resin and antifungal, and denture base resin and antimicrobial. The Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines were applied for subsequent data analysis. RESULTS: Of 2536 identified articles, 28 met the inclusion criteria for the systematic review. Antimicrobial materials were divided into 3 groups: antimicrobial monomer or copolymer, phytochemical or phytomedical components, and other compounds. Strategies on how to incorporate these substances into DBRs and their impact on the reduction and prevention of the growth of microorganisms were identified. CONCLUSIONS: Although many efforts have been made to improve the antimicrobial ability of DBRs, this systematic review found that the effectiveness of incorporating of antimicrobial agents into DBRs has not been demonstrated conclusively.

Cognitive-behavioral therapy in the time of coronavirus: Clinician tips for working with eating disorders via telehealth when face-to-face meetings are not possible.

OBJECTIVE: The coronavirus pandemic has led to a dramatically different way of working for many therapists working with eating disorders, where telehealth has suddenly become the norm. However, many clinicians feel ill equipped to deliver therapy via telehealth, while adhering to evidence-based interventions. This article draws together clinician experiences of the issues that should be attended to, and how to address them within a telehealth framework. METHOD: Seventy clinical colleagues of the authors were emailed and invited to share their concerns online about how to deliver cognitive-behavioral therapy for eating disorders (CBT-ED) via telehealth, and how to adapt clinical practice to deal with the problems that they and others had encountered. After 96 hr, all the suggestions that had been shared by 22 clinicians were collated to provide timely advice for other clinicians. RESULTS: A range of themes emerged from the online discussion. A large proportion were general clinical and practical domains (patient and therapist concerns about telehealth; technical issues in implementing telehealth; changes in the environment), but there were also specific considerations and clinical recommendations about the delivery of CBT-ED methods. DISCUSSION: Through interaction and sharing of ideas, clinicians across the world produced a substantial number of recommendations about how to use telehealth to work with people with eating disorders while remaining on track with evidence-based practice. These are shared to assist clinicians over the period of changed practice.

Validity and reliability of a self-assessment scale for Dental and Oral Health student's perception of transferable skills in Australia.

BACKGROUND: The Australian Dental Council's (ADC) competency framework requires graduating dental practitioners to be competent in a number of transferable skills, which includes: being scientifically versed, technically skilled and capable of safe independent work and teamwork, whilst adhering to high ethical standards (Australian Dental Council. Professional Competencies of the Newly Qualified Dentist. Melbourne, Australia: ADC; 2016). Part of the role of dental educators is to ensure graduating students acquire requisite transferable skills, in line with regulatory requirements (Chuenjitwongsa et al. Eur J Dent Educ. 2018;22:1). In order to achieve this, it is imperative to assess students' own understanding or perception of transferable skill requirement upon graduation. The objective of this study was to develop a valid and reliable scale for this assessment. METHOD: A cohort of students drawn across three different dental programmes: undergraduate dentistry (years 1-3); post-graduate dentistry (years 4-5); and Bachelor of Dental Technology/Prosthesis, participated in this study. A self-assessment questionnaire containing relevant open- and closed-ended questions was administered. The questionnaire assessed students' perception of transferable skills for their future career and attitude towards learning and developing transferable skills. RESULT: In total, we successfully assessed 388 of the 391 students sampled (99.2% response rate), their mean age was 24.3 years (SD ± 5.7), and 53.3% were females, whilst 46.7% were males. Overall, exploratory factor analysis (EFA) extracted five factors for students' perception of current skill level, and four factors for future skill requirements. The factor structures were confirmed using confirmatory factor analysis (CFA), and the structure had a good model fit and high levels of reliability, with respect to individual dimension and content validity. CONCLUSIONS: The structure derived from the transferable skill survey administered to a cohort of dental students suggests that the transferable skill survey can be utilised as a valid and reliable screening tool to test students' perception of transferable skill requirements.

Association of maternal risk factors with the recent rise of neural tube defects in Canada.

BACKGROUND: We sought to assess the recent trend in NTD prevalence at birth in the post-folic acid food fortification era and to identify the maternal risk factors associated with that trend. METHODS: We carried out a population-based study of all livebirths and stillbirths (including late pregnancy terminations) delivered in hospitals in Canada (excluding Quebec) from 2004 to 2015 (n = 3 439 330). We examined NTD birth prevalence by year, multiple pregnancy, maternal age, parity, pregestational diabetes, chronic illness, and problematic substance use. Poisson regression was used to quantify the association between spina bifida and cranial defects and maternal characteristics and other risk factors. RESULTS: We identified 1517 non-chromosomal NTDs, yielding a birth prevalence of 4.4 per 10 000 total births. NTD prevalence rose from 3.6 in 2004 to 4.6 per 10 000 in 2015 (Ptrend  = 0.03). Among NTD subtypes, only spina bifida showed a temporal increase (Ptrend  = 0.03). Birth prevalence of spina bifida was higher among younger mothers, those with type 2 diabetes (rate ratio (RR) 3.74, 95% confidence interval (CI) 2.21, 6.35), chronic illness (RR 3.16, 95% CI 1.97, 5.07), and problematic substance use (RR 1.88, 95% CI 1.31, 2.71). Adjusting for risk factors attenuated the significant temporal trend in spina bifida (unadjusted average annual prevalence ratio (aAAPR) 1.016, 95% CI 1.001, 1.032; adjusted AAPR 1.014, 95% CI 0.998, 1.029). CONCLUSIONS: Increases in the frequency of maternal risk factors such as pregestational diabetes mellitus, substance use, and chronic illness may be partly responsible for the recent rise in NTDs, particularly spina bifida.

Practice guideline: joint CCMG-SOGC recommendations for the use of chromosomal microarray analysis for prenatal diagnosis and assessment of fetal loss in Canada.

BACKGROUND: The aim of this guideline is to provide updated recommendations for Canadian genetic counsellors, medical geneticists, maternal fetal medicine specialists, clinical laboratory geneticists and other practitioners regarding the use of chromosomal microarray analysis (CMA) for prenatal diagnosis. This guideline replaces the 2011 Society of Obstetricians and Gynaecologists of Canada (SOGC)-Canadian College of Medical Geneticists (CCMG) Joint Technical Update. METHODS: A multidisciplinary group consisting of medical geneticists, genetic counsellors, maternal fetal medicine specialists and clinical laboratory geneticists was assembled to review existing literature and guidelines for use of CMA in prenatal care and to make recommendations relevant to the Canadian context. The statement was circulated for comment to the CCMG membership-at-large for feedback and, following incorporation of feedback, was approved by the CCMG Board of Directors on 5 June 2017 and the SOGC Board of Directors on 19 June 2017. RESULTS AND CONCLUSIONS: Recommendations include but are not limited to: (1) CMA should be offered following a normal rapid aneuploidy screen when multiple fetal malformations are detected (II-1A) or for nuchal translucency (NT) ≥3.5 mm (II-2B) (recommendation 1); (2) a professional with expertise in prenatal chromosomal microarray analysis should provide genetic counselling to obtain informed consent, discuss the limitations of the methodology, obtain the parental decisions for return of incidental findings (II-2A) (recommendation 4) and provide post-test counselling for reporting of test results (III-A) (recommendation 9); (3) the resolution of chromosomal microarray analysis should be similar to postnatal microarray platforms to ensure small pathogenic variants are detected. To minimise the reporting of uncertain findings, it is recommended that variants of unknown significance (VOUS) smaller than 500 Kb deletion or 1 Mb duplication not be routinely reported in the prenatal context. Additionally, VOUS above these cut-offs should only be reported if there is significant supporting evidence that deletion or duplication of the region may be pathogenic (III-B) (recommendation 5); (4) secondary findings associated with a medically actionable disorder with childhood onset should be reported, whereas variants associated with adult-onset conditions should not be reported unless requested by the parents or disclosure can prevent serious harm to family members (III-A) (recommendation 8).The working group recognises that there is variability across Canada in delivery of prenatal testing, and these recommendations were developed to promote consistency and provide a minimum standard for all provinces and territories across the country (recommendation 9).

Optical assessment of skin carotenoid status as a biomarker of vegetable and fruit intake.

Resonance Raman spectroscopy (RRS) and reflection spectroscopy (RS) are optical methods applicable to the non-invasive detection of carotenoids in human skin. RRS is the older, more thoroughly validated method, whereas RS is newer and has several advantages. Since collective skin carotenoid levels serve as a biomarker for vegetable and fruit intake, both methods hold promise as convenient screening tools for assessment of dietary interventions and correlations between skin carotenoids and health and disease outcomes. In this manuscript, we describe the most recent optimized device configurations and compare their use in various clinical and field settings. Both RRS and RS devices yield a wide range of skin carotenoid levels between subjects, which is a critical feature for a biomarker. Repeatability of the methods is 3-15% depending on the subject's skin carotenoid level and the uniformity of its local distribution. For 54 subjects recruited from an ophthalmology clinic, we first checked the validity of the relatively novel RS methodology via biochemical serum carotenoid measurements, the latter carried out with high performance liquid chromatography (HPLC). A high correlation between RS skin and serum HPLC carotenoid levels was established (R = 0.81; p < 0.001). Also, a high correlation was found between RS and RRS skin levels (R = 0.94 p < 0.001). Subsequent comparisons of skin carotenoid measurements in diverse age groups and ethnicities included 569 Japanese adults, 947 children with ages 2-5 screened in 24 day care centers in San Francisco, and 49 predominantly Hispanic adults screened at an outdoor health fair event. Depending on the particular subject group, correlation coefficients between the RRS and RS methods ranged between R ∼0.80 and R ∼0.96. Analysis of the Japanese screening showed that, on average, skin carotenoid levels are higher in women compared to men, skin levels do not depend on age, and tobacco smokers have reduced levels versus non-smokers. For the two most ethnically diverse groups with widely varying melanin levels, we investigated the effect of dermal melanin on RS and RRS skin carotenoid levels. The analysis revealed that large variations in skin carotenoid levels remain detectable independent of the particular melanin index. This behavior is consistent with the absence of melanin effects on the skin carotenoid levels generated with the instrument configurations. The RS method has an advantage over RRS in its relative simplicity. Due to its detection of skin reflection over a wide spectral range from the near UV to the near IR, it has the unique ability to quantify each of the major tissue chromophores and take them into account in the derivation of skin carotenoid levels.

Why We Became Nurse Educators: Findings From a Nationwide Survey of Current Nurse Educators.

AIM: The aim of the study was to identify what a national sample of nurse faculty believe will help build the faculty population. BACKGROUND: The aging population contributes to the need for new nurses while reducing the number of experienced faculty. Retaining faculty and attracting younger faculty are essential. METHOD: This descriptive study used an online survey. Nurse educators teaching at all levels (n = 940) were asked to rate the effectiveness of attraction, recruitment, and retention strategies. This article reports on responses to one of the survey's open-ended question; a content analysis was conducted to develop a narrative description about why respondents chose nursing education. RESULTS: Respondents wanted to teach in a stimulating yet flexible work environment, hoped to influence the profession, had been influenced by educators, and sought change and challenge in their careers. CONCLUSION: Faculty find nursing academia satisfying and rewarding, but noncompetitive compensation and unsatisfactory work environments can eclipse satisfiers.

Effect of Folic Acid Food Fortification in Canada on Congenital Heart Disease Subtypes.

BACKGROUND: Previous studies have yielded inconsistent results for the effects of periconceptional multivitamins containing folic acid and of folic acid food fortification on congenital heart defects (CHDs). METHODS: We carried out a population-based cohort study (N=5 901 701) of all live births and stillbirths (including late-pregnancy terminations) delivered at ≥20 weeks' gestation in Canada (except Québec and Manitoba) from 1990 to 2011. CHD cases were diagnosed at birth and in infancy (n=72 591). We compared prevalence rates and temporal trends in CHD subtypes before and after 1998 (the year that fortification was mandated). An ecological study based on 22 calendar years, 14 geographic areas, and Poisson regression analysis was used to quantify the effect of folic acid food fortification on nonchromosomal CHD subtypes (n=66 980) after controlling for changes in maternal age, prepregnancy diabetes mellitus, preterm preeclampsia, multiple birth, and termination of pregnancy. RESULTS: The overall birth prevalence rate of CHDs was 12.3 per 1000 total births. Rates of most CHD subtypes decreased between 1990 and 2011 except for atrial septal defects, which increased significantly. Folic acid food fortification was associated with lower rates of conotruncal defects (adjusted rate ratio [aRR], 0.73, 95% confidence interval [CI], 0.62-0.85), coarctation of the aorta (aRR, 0.77; 95% CI, 0.61-0.96), ventricular septal defects (aRR, 0.85; 95% CI, 0.75-0.96), and atrial septal defects (aRR, 0.82; 95% CI, 0.69-0.95) but not severe nonconotruncal heart defects (aRR, 0.81; 95% CI, 0.65-1.03) and other heart or circulatory system abnormalities (aRR, 0.98; 95% CI, 0.89-1.11). CONCLUSIONS: The association between food fortification with folic acid and a reduction in the birth prevalence of specific CHDs provides modest evidence for additional benefit from this intervention.

Human exposure to environmental contaminants and congenital anomalies: a critical review.

Congenital anomalies are an important cause of infant mortality and disability. Developmental exposure to environmental contaminants is thought to increase the risk for congenital anomalies. Herein, we describe a critical review of the literature conducted between February and March 2014 yielding 3057 references from which 97 unique relevant articles published from 2003 through 2014 were evaluated. Common congenital anomalies including hypospadias, cryptorchidism, anogenital distance (AGD), congenital heart defects and oral clefts were well represented in the literature whereas other outcomes such as neural tube defects, limb deficiency defects and gastroschisis were rarely described. While definitions used for congenital anomalies and methods of ascertainment were usually consistent across studies, inconsistencies were frequently found in grouping of different congenital heart defects. Despite strong links between some congenital anomalies and parental occupation, these studies are unable to provide clear insight into the specific chemicals responsible owing to lack of direct measures of exposure. In comparison, data are mixed for contaminant exposures at concentrations representative of results from contemporary biomonitoring studies. Of the environmental contaminants studied, the association between phthalate exposures and developmental abnormalities of the male reproductive tract received the greatest attention. Important limitations of the literature studied relate to adequacy of sample size, absence of or weaknesses in exposure assessment methodologies, failure to account for biological plausibility and grouping of congenital anomalies with divergent mechanisms. We conclude that the literature is inadequate at this time to support a conclusion that exposure to environmental contaminants are or are not associated with increased risks for congenital anomalies in the general population.