RESUMO
The aim of this study was to characterize the Tunisian Fasciola spp. flukes by morphometric and molecular analyses. Flukes were collected from livers of sheep slaughtered in Sejnane slaughterhouses (Bizerte gouvernorate, Northwest Tunisia) between January and March 2021.Five morphometric parameters were determined for all the liver flukes, as follows: (i) total body length (BL), (ii) distance between ventral sucker and the tail (VS-T), (iii) distance between oral sucker and ventral sucker (OS-VS), (iv) abdomen diameter (AD), (v) tail diameter (TD) and the body length to width ratio (BL/BW). Molecular identification of the fluke specimens was carried out by polymerase chain reaction, restriction fragment polymorphism (PCR-RFLP) of a 680 bp sequence of the internal transcribes spacer 1 (ITS1) gene and by amplification, sequencing, and phylogenetic analysis of a 500 bp sequence of the ITS2 gene. Morphometric measurements showed that the mean of the total body length of the adult flukes was 21.1 ± 2.7 mm with minimum and maximum lengths of 13 and 31 mm, respectively. The PCR-RFLP analysis revealed a single profile consisting of three bands of approximately 370, 100, and 60 bp. Fasciola sequences described in the present study (GenBank numbers: OQ457027 and OQ457028) showed 99.58-100% identity to Fasciola hepatica. In conclusion, the results of this study show that molecular and phylogenetic analyses confirm the presence of a single species of F. hepatica in the Sejnane region Northwest of Tunisia. However, further studies are needed to identify the occurrence of Fasciola species in other Tunisian regions.
Assuntos
Doenças dos Bovinos , Fasciola hepatica , Fasciola , Fasciolíase , Ovinos/genética , Animais , Bovinos , Fasciola/genética , Filogenia , Tunísia/epidemiologia , Fasciolíase/epidemiologia , Fasciolíase/veterinária , Fasciola hepatica/genética , Doenças dos Bovinos/epidemiologia , DNA de Helmintos/genéticaRESUMO
BACKGROUND: The COVID-19 pandemic has exacerbated disparities in poverty and illness for people in vulnerable circumstances in ethnocultural communities. We sought to understand the evolving impacts of COVID-19 on ethnocultural communities to inform intersectoral advocacy and community action. METHODS: The Illuminate Project used participatory action research, with cultural health brokers as peer researchers, from Sept. 21 to Dec. 31, 2020, in Edmonton, Alberta. Twenty-one peer researchers collected narratives from members of ethnocultural communities and self-interpreted them as they entered the narratives into the SenseMaker platform, a mixed-method data collection tool. The entire research team analyzed real-time, aggregate, quantitative and qualitative data to identify emerging thematic domains, then visualized these domains with social network analysis. RESULTS: Brokers serving diverse communities collected 773 narratives. Identified domains illuminate the evolving and entangled impacts of COVID-19 including the following: COVID-19 prevention and management; care of acute, chronic and serious illnesses other than COVID-19; maternal care; mental health and triggers of past trauma; financial insecurity; impact on children and youth and seniors; and legal concerns. We identified that community social capital and cultural brokering are key assets that facilitate access to formal health and social system supports. INTERPRETATION: The Illuminate Project has illustrated the entangled, systemic issues that result in poor health among vulnerable members of ethnocultural communities, and the exacerbating effects of COVID-19, which also increased barriers to mitigation. Cultural brokering and community social capital are key supports for people during the COVID-19 pandemic. These findings can inform policy to reduce harm and support community resiliency.
Assuntos
COVID-19/etnologia , Serviços de Saúde Comunitária/organização & administração , Pandemias , Populações Vulneráveis/etnologia , Alberta/epidemiologia , COVID-19/prevenção & controle , COVID-19/terapia , Informação de Saúde ao Consumidor , Feminino , Estresse Financeiro , Pesquisa sobre Serviços de Saúde , Disparidades em Assistência à Saúde , Humanos , Masculino , Pobreza , SARS-CoV-2 , Capital Social , Análise de Rede Social , Apoio SocialRESUMO
OBJECTIVE: To examine the frequency of specific learning disorder among primary school children. METHODS: The cross-sectional study was conducted from January to July 2018 in Sarai Alamgir, Gujrat, Pakistan, and comprised children studying in 3rd and 4th grades of six local public and private primary schools. Data was collected using structured clinical diagnostic interviews based on the fifth edition of the Diagnostic and Statistical Manual of Mental Disorders. Data was analysed using SPSS 16. RESULTS: Of the 837 subjects, 413(49.3%) were from private schools and 424(50.7%) from public schools. A total of 174(20.7%) children were found vulnerable to specific learning disorders, while 13(7.5%) of them were diagnosed as suffering from different specific learning disorders. Of these 13 subjects, 1(7.7%) child had reading impairment, 3(23.1%) had mathematics impairment, 4(30.8%) had multiple impairment in mathematics and writing, 1(7.7%) had multiple impairment in mathematics and reading, 1(7.7%) had multiple impairment in reading and writing, and 3(23.1%) had multiple impairment in mathematics, reading and writing. CONCLUSIONS: Specific learning disorder was found to be prevailing in public and private school children.
Assuntos
Transtorno de Aprendizagem Específico , Criança , Estudos Transversais , Humanos , Paquistão/epidemiologia , Leitura , Instituições AcadêmicasRESUMO
Phosphate limitation has been suggested as a preventive method against biofilms. P-limited feed water was studied as a preventive strategy against biofouling in cooling towers (CTs). Three pilot-scale open recirculating CTs were operated in parallel for five weeks. RO permeate was fed to the CTs (1) without supplementation (reference), (2) with supplementation by biodegradable carbon (P-limited) and (3) with supplementation of all nutrients (non-P-limited). The P-limited water contained ≤10 µg PO4 l-1. Investigating the CT-basins and coupons showed that P-limited water (1) did not prevent biofilm formation and (2) resulted in a higher volume of organic matter per unit of active biomass compared with the other CTs. Exposure to external conditions and cycle of concentration were likely factors that allowed a P concentration sufficient to cause extensive biofouling despite being the limiting compound. In conclusion, phosphate limitation in cooling water is not a suitable strategy for CT biofouling control.
Assuntos
Biofilmes , Incrustação Biológica , Purificação da Água , Incrustação Biológica/prevenção & controle , Biomassa , Membranas Artificiais , FosfatosRESUMO
Fasciolosis is a worldwide zoonotic snail-borne infection that affects ruminants, it causes high economic losses among livestock. A participatory epidemiological survey was conducted on 204 sheep owners of Sejnane region (District of Bizerte, Northwest Tunisia) to assess their knowledge, attitude and practice regarding fasciolosis. All interviewed sheep owners are aware of this parasitic infection (100%, 204/204), among them, 81% (165/204) reported history of clinical cases in their sheep flocks. According to 33.73% (113/335) of them, sheep get infected by fasciolosis mainly by grazing in wet areas, 79.9% (163/204) of these farmers think that wet climate is the most favourable for the infection. Weight loss (28.40%, 121/426) and submandibular oedema (20.42%, 87/426) are the main clinical signs of fasciolosis cited by interviewed sheep owners and the majority of them (98.53%; 201/204) confirmed that fasciolosis causes significant economic losses. Fasciolosis infection persists in Sejnane region despite the use of antiparasitic drugs, this is due mainly to the fact that animals graze in moist grass (39.88%, 132/331). Treat animals (51.47%, 193/375), prohibit grazing on moist grass (15.20%, 57/357), prohibit grazing on wet soils (14.33%, 53/357) and avoid pastures (10.93%, 41/357) are the main prevention measures cited by interviewed sheep owners. Only 18,14% (37/204) of responders knew that fascioliasis is a zoonotic disease. These results could be considered by animal health decision makers and field veterinarians when implementing control programmes in order to increase breeders' knowledge of fasciolosis.
Assuntos
Fasciolíase , Conhecimentos, Atitudes e Prática em Saúde , Doenças dos Ovinos , Animais , Fasciolíase/veterinária , Fasciolíase/epidemiologia , Fasciolíase/prevenção & controle , Ovinos , Doenças dos Ovinos/epidemiologia , Doenças dos Ovinos/parasitologia , Doenças dos Ovinos/prevenção & controle , Tunísia/epidemiologia , Humanos , Criação de Animais Domésticos/métodos , Feminino , Masculino , Inquéritos e Questionários , Fazendeiros/psicologia , Zoonoses/parasitologia , Zoonoses/epidemiologia , Zoonoses/prevenção & controleRESUMO
DNA extraction yield from drinking water distribution systems and premise plumbing is a key metric for any downstream analysis such as 16S amplicon or metagenomics sequencing. This research aimed to optimize DNA yield from low-biomass (chlorinated) reverse osmosis-produced tap water by evaluating the impact of different factors during the DNA extraction procedure. The factors examined are (1) the impact of membrane materials and their pore sizes; (2) the impact of different cell densities; and (3) an alternative method for enhancing DNA yield via incubation (no nutrient spiking). DNA from a one-liter sampling volume of RO tap water with varying bacterial cell densities was extracted with five different filter membranes (mixed ester cellulose 0.2 µm, polycarbonate 0.2 µm, polyethersulfone 0.2 and 0.1 µm, polyvinylidene fluoride 0.1 µm) for biomass filtration. Our results show that (i) smaller membrane pore size solely did not increase the DNA yield of low-biomass RO tap water; (ii) the DNA yield was proportional to the cell density and substantially dependent on the filter membrane properties (i.e., the membrane materials and their pore sizes); (iii) by using our optimized DNA extraction protocol, we found that polycarbonate filter membrane with 0.2 µm pore size markedly outperformed in terms of quantity (DNA yield) and quality (background level of 16S gene copy number) of recovered microbial DNA; and finally, (iv) for one-liter sampling volume, incubation strategy enhanced the DNA yield and enabled accurate identification of the core members (i.e., Porphyrobacter and Blastomonas as the most abundant indicator taxa) of the bacterial community in low-biomass RO tap water. Importantly, incorporating multiple controls is crucial to distinguish between contaminant/artefactual and true taxa in amplicon sequencing studies of low-biomass RO tap water.
RESUMO
The aim of this study was to estimate the molecular infection prevalence of Toxoplasma gondii in sheep liver tissues destined for human consumption. A total number of 224 liver tissues were collected from slaughtered sheep in Sejnane slaughterhouse (Northwest Tunisia). PCR was used to detect T. gondii DNA in liver tissues followed by phylogenetic analysis of amplicons. The phylogenetic tree was then constructed to compare the partial sequences of the ITS1 gene with GenBank sequences.The overall molecular prevalence of T. gondii in sheep livers was 25% (56/224). The highest molecular prevalence of T. gondii was recorded in sheep aged of less than one year old (27.3%; 52/190). Infection prevalence was significantly higher in Noire de Thibar breed (33%; 17/51) compared to other breeds (p = 0.023). There were no differences depicted according to sheep's gender. The T. gondii sequences obtained in the present study (GenBank accession numbers: OR509829 and OR509830) were 98.40-100% homologous to T. gondii sequences published in the GenBank. These results highlight a high level of T. gondii contamination of tissues destined for human consumption. Further studies are needed to improve our knowledge on different genotypes of T. gondii that infect Tunisian sheep population.
RESUMO
We investigated herein the prevalence of Fasciola hepatica infection in sheep at Sejnane slaughterhouse, governorate of Bizerte, Northwest of Tunisia, using three different diagnostic techniques (liver dissection, bile examination, and coprology). Faeces, liver, gall bladder as well as blood samples were collected from 603 slaughtered sheep in two seasons: winter and summer. Faecal egg counts of F. hepatica were estimated using sedimentation technique. Livers were examined for the presence of flukes, and bile collected from gall bladder was examined by sedimentation technique for the presence of F. hepatica eggs. Faecal egg counts of gastrointestinal helminths were estimated using flotation followed by the McMaster technique. Blood samples were used to estimate blood cell count (RBC) (×106/mL), haemoglobin (Hb) (g/dL), and haematocrit (Ht) (%) levels. A total of 1714 F. hepatica flukes were collected from 68 infected livers, the number of flukes per sheep ranged between naught and 195. Bile examination (16.78% ± 1.83; 51/310) showed the higher infection prevalence, followed by liver dissection (11.28% ± 1.17; 68/603) and coprology (9.12% ± 1.08; 55/603) (p = 0.015). Infection prevalences were significantly higher in young sheep aged of less than 1 year (8.13% ± 1.22; 49/498), in cross-bred sheep (10.61% ± 1.39%; 64/478), and in summer (7.13% ± 1.82; 43/293) (p < 0.05). There was no significant difference in infection prevalence by gastrointestinal helminths in F. hepatica-infected and F. hepatica-non-infected animals (p > 0.05). The overall prevalence of F. hepatica-infected anaemic sheep was higher (22.73% ± 4.47; 20/88) than F. hepatica-non-infected anaemic sheep (p < 0.05). Fasciola hepatica infection is frequent in sheep from Sejnane representing hence an important constraint for the development of the sheep industry in this region. Therefore, it is necessary to establish and implement a specific control programme to reduce fasciolosis infection risks including animal owners' education.
Assuntos
Anemia , Fasciola hepatica , Fasciolíase , Doenças dos Ovinos , Animais , Fasciolíase/veterinária , Fasciolíase/epidemiologia , Fasciolíase/parasitologia , Doenças dos Ovinos/epidemiologia , Doenças dos Ovinos/parasitologia , Ovinos , Prevalência , Tunísia/epidemiologia , Fasciola hepatica/isolamento & purificação , Anemia/veterinária , Anemia/epidemiologia , Anemia/parasitologia , Anemia/etiologia , Fatores de Risco , Carneiro Doméstico , Feminino , Masculino , Gastroenteropatias/veterinária , Gastroenteropatias/epidemiologia , Gastroenteropatias/parasitologia , Matadouros , Helmintíase Animal/epidemiologia , Helmintíase Animal/parasitologia , Enteropatias Parasitárias/veterinária , Enteropatias Parasitárias/epidemiologia , Enteropatias Parasitárias/parasitologiaRESUMO
The fouling of seawater reverse osmosis (SWRO) membranes remains a persistent challenge in desalination. Previous research has focused mainly on fouling separately; however, organic, inorganic, and biofouling can coexist and influence each other. Hence, in-depth study of the spatiotemporal changes in actual combined fouling in full-scale seawater desalination will provide more effective information for fouling investigation and control. In this study, we monitored (i) the operational performance of a full-scale desalination plant for 7 years and (ii) the development and characterization of membrane and spacer fouling at different locations of spiral-wound membrane modules sampled after 2.5-, 3.5-, and 7-year operation. The findings showed that (i) operational performance indicators declined with time (normalized flux 40 % reduction, salt rejection 2 % in 7 years), with a limited effect of the 20-day cleaning frequency, (ii) fouling accumulation in the membrane module mainly occurred at the feed side of the lead module and the microbial community in these area exhibited the highest diversity, (iii) the dominant microbial OTUs belonged mainly to Proteobacteria (43-70 %), followed by Bacteroidetes (10-11 %), (iv) Phylogenetic molecular ecological networks and Spearman correlation analysis revealed that Chloroflexi (Anaerolineae) and Planctomycetes were keystone species in maintaining the community structure and biofilm maturation and significantly impacted the foulant content on the SWRO membrane, even with low abundance, and that (v) fouling accumulation was composed of polysaccharides, soluble microbial products, marine humic acid-like substances, and inorganic Ca/Fe/Mg/Si dominate the fouling layer of both the membrane and spacer. Overall, variation partitioning analysis quantitatively describes the increasing contribution of biofouling over time. Ultimately, the organicâinorganic-biofouling interaction (70 %) significantly contributed to the overall fouling of the membrane after 7 years of operation. These results can be used to develop more targeted fouling control strategies to optimize SWRO desalination plant design and operation.
Assuntos
Incrustação Biológica , Purificação da Água , Filogenia , Membranas Artificiais , Purificação da Água/métodos , Osmose , Água do Mar/químicaRESUMO
Water scarcity is the main factor driving the enhancement of available technologies and the development of new technologies [...].
RESUMO
Nutrient limitation has been proposed as a biofouling control strategy for membrane systems. However, the impact of permeation on biofilm development under phosphorus-limited and enriched conditions is poorly understood. This study analyzed biofilm development in membrane fouling simulators (MFSs) with and without permeation supplied with water varying dosed phosphorus concentrations (0 and 25 µg P·L-1). The MFSs operated under permeation conditions were run at a constant flux of 15.6 L·m2·h-1 for 4.7 days. Feed channel pressure drop, transmembrane pressure, and flux were used as performance indicators. Optical coherence tomography (OCT) images and biomass quantification were used to analyze the developed biofilms. The total phosphorus concentration that accumulated on the membrane and spacer was quantified by using microwave digestion and inductively coupled plasma atomic emission spectroscopy (ICP-OES). Results show that permeation impacts biofilm development depending on nutrient condition with a stronger impact at low P concentration (pressure drop increase: 282%; flux decline: 11%) compared to a higher P condition (pressure drop increase: 206%; flux decline: 2%). The biofilm that developed at 0 µg P·L-1 under permeation conditions resulted in a higher performance decline due to biofilm localization and spread in the MFS. A thicker biofilm developed on the membrane for biofilms grown at 0 µg P·L-1 under permeation conditions, causing a stronger effect on flux decline (11%) compared to non-permeation conditions (5%). The difference in the biofilm thickness on the membrane was attributed to a higher phosphorus concentration in the membrane biofilm under permeation conditions. Permeation has an impact on biofilm development and, therefore, should not be excluded in biofouling studies.
RESUMO
Monitoring the changes that occur to water during distribution is vital to ensure water safety. In this study, the biological stability of reverse osmosis (RO) produced drinking water, characterized by low cell concentration and low assimilable organic carbon, in combination with chlorine disinfection was investigated. Water quality at several locations throughout the existing distribution network was monitored to investigate whether microbial water quality changes can be identified. Results revealed that the water leaving the plant had an average bacterial cell concentration of 103 cells/mL. A 0.5-1.5 log increase in bacterial cell concentration was observed at locations in the network. The residual disinfectant was largely dissipated in the network from 0.5 mg/L at the treatment plant to less than 0.1 mg/L in the network locations. The simulative study involving miniature distribution networks, mimicking the dynamics of a distribution network, fed with the RO produced chlorinated and non-chlorinated drinking water revealed that distributing RO produced water without residual disinfection, especially at high water temperatures (25-30 °C), poses a higher chance for water quality change. Within six months of operation of the miniature network fed with unchlorinated RO produced water, the adenosine triphosphate (ATP) and total cell concentration (TCC) in the pipe biofilm were 4 × 102 pg ATP/cm2 and 1 × 107 cells/ cm2. The low bacterial cell concentration and organic carbon concentration in the RO-produced water did not prevent biofilm development inside the network with and without residual chlorine. The bacterial community analysis using 16S ribosomal RNA (rRNA) gene sequencing revealed that mesophilic bacteria with higher temperature tolerance and bacteria associated with oligotrophic, nutrient-poor conditions dominated the biofilm, with no indication of the existence of opportunistic pathogenic species. However, chlorination selected against most bacterial groups and the bacterial community that remained was mainly the bacteria capable of surviving disinfection regimes. Biofilms that developed in the presence of chlorine contained species classified as opportunistic pathogens. These biofilms have an impact on shaping the water quality received at the consumer tap. The presence of these bacteria on its own is not a health risk indicator; viability assessment and qPCRs targeting genes specific to the opportunistic pathogens as well as quantitative microbiological risk assessment (QMRA) should be included to assess the risk. The results from this study highlight the importance of implementing multiple barriers to ensure water safety. Changes in water quality detected even when high-quality disinfected RO-produced water is distributed highlight microbiological challenges that chlorinated systems endure, especially at high water temperatures.
Assuntos
Água Potável , Purificação da Água , Cloro , Água do Mar , Abastecimento de ÁguaRESUMO
Biofouling is a hurdle of seawater desalination that increases water costs and energy consumption. In membrane distillation (MD), biofouling development is complicated due to the temperature effect that adversely affects microbial growth. Given the high relevance of MD to regions with abundant warm seawater, it is essential to explore the biofouling propensity of microbial communities with higher tolerance to elevated temperature conditions. This study presents a comprehensive analysis of the spatial and temporal biofilm distribution and associated membrane fouling during direct contact MD (DCMD) of the Red Sea water. We found that structure and composition of the biofilm layer played a significant role in the extent of permeate flux decline, and biofilms that built up at 45°C had lower bacterial concentration but higher extracellular polymeric substances (EPS) content as compared to biofilms that formed at 55 °C and 65°C. Pore wetting and bacterial passage to the permeate side were initially observed but slowed down as operating time increased. Intact cells in biofilms dominated over the damaged cells at any tested condition emphasizing the high adaptivity of the Red Sea microbial communities to elevated feed temperatures. A comparison of microbial abundance revealed a difference in bacterial distribution between the feed and biofilm samples. A shift in the biofilm microbial community and colonization of the membrane surface with thermophilic bacteria with the feed temperature increase was observed. The results of this study improve our understanding of biofouling propensity in MD that utilizes temperature-resilient feed waters.
Assuntos
Incrustação Biológica , Purificação da Água , Bactérias , Biofilmes , Destilação , Membranas Artificiais , Osmose , Água do Mar , Água , Purificação da Água/métodosRESUMO
The shortage of fresh water resources has made the desalination of seawater a widely adopted technology. Seawater reverse osmosis (SWRO) is the most commonly used method for desalination. The SWRO process is energy-intensive, and most of the energy in SWRO is spent on pressurizing the seawater to overcome the osmotic barrier for producing fresh water. The pressure needed depends on the salinity of the seawater, its temperature, and the membrane surface properties. Membrane compaction occurs in SWRO due to hydraulic pressure application for long-term operations and operating temperature fluctuations due to seasonal seawater changes. This study investigates the effects of short-term feed water temperature increase on the SWRO process in a full-scale pilot with pretreatment and a SWRO installation consisting of a pressure vessel which contains seven industrial-scale 8" diameter spiral wound membrane elements. A SWRO feed water temperature of 40 °C, even for a short period of 7 days, caused a permanent performance decline illustrated by a strong specific energy consumption increase of 7.5%. This study highlights the need for membrane manufacturer data that account for the water temperature effect on membrane performance over a broad temperature range. There is a need to develop new membranes that are more tolerant to temperature fluctuations.
RESUMO
The application of membrane technology for water treatment and reuse is hampered by the development of a microbial biofilm. Biofilm growth in micro-and ultrafiltration (MF/UF) membrane modules, on both the membrane surface and feed spacer, can form a secondary membrane and exert resistance to permeation and crossflow, increasing energy demand and decreasing permeate quantity and quality. In recent years, exhaustive efforts were made to understand the chemical, structural and hydraulic characteristics of membrane biofilms. In this review, we critically assess which specific structural features of membrane biofilms exert resistance to forced water passage in MF/UF membranes systems applied to water and wastewater treatment, and how biofilm physical structure can be engineered by process operation to impose less hydraulic resistance ("below-the-pain threshold"). Counter-intuitively, biofilms with greater thickness do not always cause a higher hydraulic resistance than thinner biofilms. Dense biofilms, however, had consistently higher hydraulic resistances compared to less dense biofilms. The mechanism by which density exerts hydraulic resistance is reported in the literature to be dependant on the biofilms' internal packing structure and EPS chemical composition (e.g., porosity, polymer concentration). Current reports of internal porosity in membrane biofilms are not supported by adequate experimental evidence or by a reliable methodology, limiting a unified understanding of biofilm internal structure. Identifying the dependency of hydraulic resistance on biofilm density invites efforts to control the hydraulic resistance of membrane biofilms by engineering internal biofilm structure. Regulation of biofilm internal structure is possible by alteration of key determinants such as feed water nutrient composition/concentration, hydraulic shear stress and resistance and can engineer biofilm structural development to decrease density and therein hydraulic resistance. Future efforts should seek to determine the extent to which the concept of "biofilm engineering" can be extended to other biofilm parameters such as mechanical stability and the implication for biofilm control/removal in engineered water systems (e.g., pipelines and/or, cooling towers) susceptible to biofouling.
Assuntos
Incrustação Biológica , Purificação da Água , Biofilmes , Membranas Artificiais , UltrafiltraçãoRESUMO
A critical problem in seawater reverse osmosis (RO) filtration processes is biofilm accumulation, which reduces system performance and increases energy requirements. As a result, membrane systems need to be periodically cleaned by combining chemical and physical protocols. Nutrient limitation in the feed water is a strategy to control biofilm formation, lengthening stable membrane system performance. However, the cleanability of biofilms developed under various feed water nutrient conditions is not well understood. This study analyzes the removal efficiency of biofilms grown in membrane fouling simulators (MFSs) supplied with water varying in phosphorus concentrations (3 and 6 µg P·L-1 and with constant biodegradable carbon concentration) by applying hydraulic cleaning after a defined 140% increase in the feed channel pressure drop, through increasing the cross-flow velocity from 0.18 m s-1 to 0.35 m s-1 for 1 h. The two phosphorus concentrations (3 and 6 µg P·L-1) simulate the RO feed water without and with the addition of a phosphorus-based antiscalant, respectively, and were chosen based on measurements at a full-scale seawater RO desalination plant. Biomass quantification parameters performed after membrane autopsies such as total cell count, adenosine triphosphate, total organic carbon, and extracellular polymeric substances were used along with feed channel pressure drop measurements to evaluate biofilm removal efficiency. The outlet water during hydraulic cleaning (1 h) was collected and characterized as well. Optical coherence tomography images were taken before and after hydraulic cleaning for visualization of biofilm morphology. Biofilms grown at 3 µg P·L-1 had an enhanced hydraulic cleanability compared to biofilms grown at 6 µg P·L-1. The higher detachment for biofilms grown at a lower phosphorus concentration was explained by more soluble polymers in the EPS, resulting in a lower biofilm cohesive and adhesive strength. This study confirms that manipulating the feed water nutrient composition can engineer a biofilm that is easier to remove, shifting research focus towards biofilm engineering and more sustainable cleaning strategies.
RESUMO
Biofouling is a problem that hinders sustainable membrane-based desalination and the stratification of bacterial populations over the biofilm's height is suggested to compromise the efficiency of cleaning strategies. Some studies reported a base biofilm layer attached to the membrane that is harder to remove. Previous research suggested limiting the concentration of phosphorus in the feed water as a biofouling control strategy. However, the existence of bacterial communities growing under phosphorus-limiting conditions and communities remaining after cleaning is unknown. This study analyzes the bacterial communities developed in biofilms grown in membrane fouling simulators (MFSs) supplied with water with three dosed phosphorus conditions at a constant biodegradable carbon concentration. After biofilm development, biofilm was removed using forward flushing (an easy-to-implement and environmentally friendly method) by increasing the crossflow velocity for one hour. We demonstrate that small changes in phosphorus concentration in the feed water led to (i) different microbial compositions and (ii) different bacterial-cells-to-EPS ratios, while (iii) similar bacterial biofilm populations remained after forward flushing, suggesting a homogenous bacterial community composition along the biofilm height. This study represents an exciting advance towards greener desalination by applying non-expensive physical cleaning methods while manipulating feed water nutrient conditions to prolong membrane system performance and enhance membrane cleanability.
RESUMO
Desalination technology based on Reverse Osmosis (RO) membrane filtration has been resorted to provide high-quality drinking water. RO produced drinking water is characterized by a low bacterial cell concentration. Monitoring microbial quality and ensuring membrane-treated water safety has taken advantage of the rapid development of DNA-based techniques. However, the DNA extraction process from RO-based drinking water samples needs to be evaluated regarding the biomass amount (filtration volume) and residual disinfectant such as chlorine, as it can affect the DNA yield. We assessed the DNA recovery applied in drinking water microbiome studies as a function of (i) different filtration volumes, (ii) presence and absence of residual chlorine, and (iii) the addition of a known Escherichia coli concentration into the (sterile and non-sterile, chlorinated and dechlorinated) tap water prior filtration, and directly onto the (0.2 µm pore size, 47 mm diameter) mixed ester cellulose membrane filters without and after tap water filtration. Our findings demonstrated that the co-occurrence of residual chlorine and low biomass/cell density water samples (RO-treated water with a total cell concentration ranging between 2.47 × 102-1.5 × 103 cells/mL) failed to provide sufficient DNA quantity (below the threshold concentration required for sequencing-based procedures) irrespective of filtration volumes used (4, 20, 40, 60 L) and even after performing dechlorination. After exposure to tap water containing residual chlorine (0.2 mg/L), we observed a significant reduction of E. coli cell concentration and the degradation of its DNA (DNA yield was below detection limit) at a lower disinfectant level compared to what was previously reported, indicating that free-living bacteria and their DNA present in the drinking water are subject to the same conditions. The membrane spiking experiment confirmed no significant impact from any potential inhibitors (e.g. organic/inorganic components) present in the drinking water matrix on DNA extraction yield. We found that very low DNA content is likely to be the norm in chlorinated drinking water that gives hindsight to its limitation in providing robust results for any downstream molecular analyses for microbiome surveys. We advise that measurement of DNA yield is a necessary first step in chlorinated drinking water distribution systems (DWDSs) before conducting any downstream omics analyses such as amplicon sequencing to avoid inaccurate interpretations of results based on very low DNA content. This study expands a substantial source of bias in using DNA-based methods for low biomass samples typical in chlorinated DWDSs. Suggestions are provided for DNA-based research in drinking water with residual disinfectant.
Assuntos
Cloro/química , DNA Bacteriano , Água Potável/microbiologia , Escherichia coli , Microbiologia da Água , Purificação da Água , DNA Bacteriano/genética , DNA Bacteriano/isolamento & purificação , Escherichia coli/genética , Escherichia coli/isolamento & purificaçãoRESUMO
Nutrient limitation is a biofouling control strategy in reverse osmosis (RO) membrane systems. In seawater, the assimilable organic carbon content available for bacterial growth ranges from about 50 to 400 µg C·L-1, while the phosphorus concentration ranges from 3 to 11 µg P·L-1. Several studies monitored biofouling development, limiting either carbon or phosphorus. The effect of carbon to phosphorus ratio and the restriction of both nutrients on membrane system performance have not yet been investigated. This study examines the impact of reduced phosphorus concentration (from 25 µg P·L-1 and 3 µg P·L-1, to a low concentration of ≤0.3 µg P·L-1), combined with two different carbon concentrations (250 C L-1 and 30 µg C·L-1), on biofilm development in an RO system. Feed channel pressure drop was measured to determine the effect of the developed biofilm on system performance. The morphology of the accumulated biomass for both carbon concentrations was characterized by optical coherence tomography (OCT) and the biomass amount and composition was quantified by measuring total organic carbon (TOC), adenosine triphosphate (ATP), total cell counts (TCC), and extracellular polymeric substances (EPS) concentration for the developed biofilms under phosphorus restricted (P-restricted) and dosed (P-dosed) conditions. For both carbon concentrations, P-restricted conditions (≤0.3 µg P·L-1) limited bacterial growth (lower values of ATP, TCC). A faster pressure drop increase was observed for P-restricted conditions compared to P-dosed conditions when 250 µg C·L-1 was dosed. This faster pressure drop increase can be explained by a higher area covered by biofilm in the flow channel and a higher amount of produced EPS. Conversely, a slower pressure drop increase was observed for P-restricted conditions compared to P-dosed conditions when 30 µg C·L-1 was dosed. Results of this study demonstrate that P-limitation delayed biofilm formation effectively when combined with low assimilable organic carbon concentration and thereby, lengthening the overall membrane system performance.
Assuntos
Incrustação Biológica , Purificação da Água , Biofilmes , Carbono , Membranas Artificiais , Osmose , FósforoRESUMO
Routine chemical cleaning with the combined use of sodium hydroxide (NaOH) and hydrochloric acid (HCl) is carried out as a means of biofouling control in reverse osmosis (RO) membranes. The novelty of the research presented herein is in the application of urea, instead of NaOH, as a chemical cleaning agent to full-scale spiral-wound RO membrane elements. A comparative study was carried out at a pilot-scale facility at the Evides Industriewater DECO water treatment plant in the Netherlands. Three fouled 8-inch diameter membrane modules were harvested from the lead position of one of the full-scale RO units treating membrane bioreactor (MBR) permeate. One membrane module was not cleaned and was assessed as the control. The second membrane module was cleaned by the standard alkali/acid cleaning protocol. The third membrane module was cleaned with concentrated urea solution followed by acid rinse. The results showed that urea cleaning is as effective as the conventional chemical cleaning with regards to restoring the normalized feed channel pressure drop, and more effective in terms of (i) improving membrane permeability, and (ii) solubilizing organic foulants and the subsequent removal of the surface fouling layer. Higher biomass removal by urea cleaning was also indicated by the fact that the total organic carbon (TOC) content in the HCl rinse solution post-urea-cleaning was an order of magnitude greater than in the HCl rinse after standard cleaning. Further optimization of urea-based membrane cleaning protocols and urea recovery and/or waste treatment methods is proposed for full-scale applications.