Dynamic flux regulation for high-titer anthranilate production by plasmid-free, conditionally-auxotrophic strains of Pseudomonas putida.

Anthranilate, an intermediate of the shikimate pathway, is a high-value aromatic compound widely used as a precursor in the production of dyes, fragrances, plastics and pharmaceuticals. Traditional strategies adopted for microbial anthranilate production rely on the implementation of auxotrophic strains-which requires aromatic amino acids or complex additives to be supplemented in the culture medium, negatively impacting production costs. In this work, we engineered the soil bacterium Pseudomonas putida for high-titer, glucose-dependent anthranilate production by repurposing elements of the Esa quorum sensing (QS) system of Pantoea stewartii. The PesaS promoter mediated a self-regulated transcriptional response that effectively knocked-down the expression of the trpDC genes. Next, we harnessed the synthetic QS elements to engineer a growth-to-anthranilate production switch. The resulting plasmid-free P. putida strain produced the target compound at 3.8 ± 0.3 mM in shaken-flask cultures after 72 h-a titer >2-fold higher than anthranilate levels reported thus far. Our results highlight the value of dynamic flux regulation for the production of intermediate metabolites within highly-regulated routes (such as the shikimate pathway), thereby circumventing the need of expensive additives.

A synthetic C2 auxotroph of Pseudomonas putida for evolutionary engineering of alternative sugar catabolic routes.

Acetyl-coenzyme A (AcCoA) is a metabolic hub in virtually all living cells, serving as both a key precursor of essential biomass components and a metabolic sink for catabolic pathways for a large variety of substrates. Owing to this dual role, tight growth-production coupling schemes can be implemented around the AcCoA node. Building on this concept, a synthetic C2 auxotrophy was implemented in the platform bacterium Pseudomonas putida through an in silico-informed engineering approach. A growth-coupling strategy, driven by AcCoA demand, allowed for direct selection of an alternative sugar assimilation route-the phosphoketolase (PKT) shunt from bifidobacteria. Adaptive laboratory evolution forced the synthetic P. putida auxotroph to rewire its metabolic network to restore C2 prototrophy via the PKT shunt. Large-scale structural chromosome rearrangements were identified as possible mechanisms for adjusting the network-wide proteome profile, resulting in improved PKT-dependent growth phenotypes. 13C-based metabolic flux analysis revealed an even split between the native Entner-Doudoroff pathway and the synthetic PKT bypass for glucose processing, leading to enhanced carbon conservation. These results demonstrate that the P. putida metabolism can be radically rewired to incorporate a synthetic C2 metabolism, creating novel network connectivities and highlighting the importance of unconventional engineering strategies to support efficient microbial production.

Functional implementation of a linear glycolysis for sugar catabolism in Pseudomonas putida.

The core metabolism for glucose assimilation of the soil bacterium and platform strain Pseudomonas putida KT2440 has been reshaped from the native, cyclically-operating Entner-Doudoroff (ED) pathway to a linear Embden-Meyerhof-Parnas (EMP) glycolysis. The genetic strategy deployed to obtain a suitable host for the synthetic EMP route involved not only eliminating enzymatic activities of the ED pathway, but also erasing peripheral reactions for glucose oxidation that divert carbon skeletons into the formation of organic acids in the periplasm. Heterologous glycolytic enzymes, recruited from Escherichia coli, were genetically knocked-in in the mutant strain to fill the metabolic gaps for the complete metabolism of glucose to pyruvate through a synthetic EMP route. A suite of genetic, physiological, and biochemical tests in the thereby-refactored P. putida strain-which grew on glucose as the sole carbon and energy source-demonstrated the functional replacement of the native sugar metabolism by a synthetic catabolism. 13C-labelling experiments indicated that the bulk of pyruvate in the resulting strain was generated through the metabolic device grafted in P. putida. Strains carrying the synthetic glycolysis were further engineered for carotenoid synthesis from glucose, indicating that the implanted EMP route enabled higher carotenoid content on biomass and yield on sugar as compared with strains running the native hexose catabolism. Taken together, our results highlight how conserved metabolic features in a platform bacterium can be rationally reshaped for enhancing physiological traits of interest.

Unravelling a new catabolic pathway of C-19 steroids in Mycobacterium smegmatis.

In this work, we have characterized the C-19+ gene cluster (MSMEG_2851 to MSMEG_2901) of Mycobacterium smegmatis. By in silico analysis, we have identified the genes encoding enzymes involved in the modification of the A/B steroid rings during the catabolism of C-19 steroids in certain M. smegmatis mutants mapped in the PadR-like regulator (MSMEG_2868), that constitutively express the C-19+ gene cluster. By using gene complementation assays, resting-cell biotransformations and deletion mutants, we have characterized the most critical genes of the cluster, that is, kstD2, kstD3, kshA2, kshB2, hsaA2, hsaC2 and hsaD2. These results have allowed us to propose a new catabolic route named C-19+ pathway for the mineralization of C-19 steroids in M. smegmatis. Our data suggest that the deletion of the C-19+ gene cluster may be useful to engineer more robust and efficient M. smegmatis strains to produce C-19 steroids from sterols. Moreover, the new KshA2, KshB2, KstD2 and KstD3 isoenzymes may be useful to design new microbial cell factories for the 9α-hydroxylation and/or Δ1-dehydrogenation of 3-ketosteroids.

Molecular characterization of a new gene cluster for steroid degradation in Mycobacterium smegmatis.

The C-19 steroids 4-androstene-3,17-dione (AD), 1,4-androstadiene-3,17-dione (ADD) or 9α-hydroxy-4-androstene-3,17-dione (9OH-AD), which have been postulated as intermediates of the cholesterol catabolic pathway in Mycobacterium smegmatis, cannot be used as sole carbon and energy sources by this bacterium. Only the ΔkstR mutant which constitutively expresses the genes repressed by the KstR regulator can metabolize AD and ADD with severe difficulties but still cannot metabolize 9OH-AD, suggesting that these compounds are not true intermediates but side products of the cholesterol pathway. However, we have found that some M. smegmatis spontaneous mutants mapped in the PadR-like regulator (MSMEG_2868) can efficiently metabolize all C-19 steroids. We have demonstrated that the PadR mutants allow the expression of a gene cluster named C-19+ (MSMEG_2851 to MSMEG_2901) encoding steroid degrading enzymes, that are not expressed under standard culture conditions. The C-19+ cluster has apparently evolved independently from the upper cholesterol kstR-regulon, but both clusters converge on the lower cholesterol kstR2-regulon responsible for the metabolism of C and D steroid rings. Homologous C-19+ clusters have been found only in other actinobacteria that metabolize steroids, but remarkably it is absent in Mycobacterium tuberculosis.

Spatiotemporal Manipulation of the Mismatch Repair System of Pseudomonas putida Accelerates Phenotype Emergence.

The development of complex phenotypes in industrially relevant bacteria is a major goal of metabolic engineering, which encompasses the implementation of both rational and random approaches. In the latter case, several tools have been developed toward increasing mutation frequencies, yet the precise control of mutagenesis processes in cell factories continues to represent a significant technical challenge. Pseudomonas species are endowed with one of the most efficient DNA mismatch repair (MMR) systems found in the bacterial domain. Here, we investigated if the endogenous MMR system could be manipulated as a general strategy to artificially alter mutation rates in Pseudomonas species. To bestow a conditional mutator phenotype in the platform bacterium Pseudomonas putida, we constructed inducible mutator devices to modulate the expression of the dominant-negative mutLE36K allele. Regulatable overexpression of mutLE36K in a broad-host-range, easy-to-cure plasmid format resulted in a transitory inhibition of the MMR machinery, leading to a significant increase (up to 438-fold) in DNA mutation frequencies and a heritable fixation of mutations in the genome. Following such an accelerated mutagenesis-followed by selection approach, three phenotypes were successfully evolved: resistance to antibiotics streptomycin and rifampicin (either individually or combined) and reversion of a synthetic uracil auxotrophy. Thus, these mutator devices could be applied to accelerate the evolution of metabolic pathways in long-term evolutionary experiments, alternating cycles of (inducible) mutagenesis coupled to selection schemes toward the desired phenotype(s).

Evolutionary Approaches for Engineering Industrially Relevant Phenotypes in Bacterial Cell Factories.

The bio-based production of added-value compounds (with applications as pharmaceuticals, biofuels, food ingredients, and building blocks) using bacterial platforms is a well-established industrial activity. The design and construction of microbial cell factories (MCFs) with robust and stable industrially relevant phenotypes, however, remains one of the biggest challenges of contemporary biotechnology. In this review, traditional and cutting-edge approaches for optimizing the performance of MCFs for industrial bioprocesses, rooted on the engineering principle of natural evolution (i.e., genetic variation and selection), are discussed. State-of-the-art techniques to manipulate and increase genetic variation in bacterial populations and to construct combinatorial libraries of strains, both globally (i.e., genome level) and locally (i.e., individual genes or pathways, and entire sections and gene clusters of the bacterial genome) are presented. Cutting-edge screening and selection technologies applied to isolate MCFs displaying enhanced phenotypes are likewise discussed. The review article is closed by presenting future trends in the design and construction of a new generation of MCFs that will contribute to the long-sought-after transformation from a petrochemical industry to a veritable sustainable bio-based industry.

New Insights on Steroid Biotechnology.

Nowadays steroid manufacturing occupies a prominent place in the pharmaceutical industry with an annual global market over $10 billion. The synthesis of steroidal active pharmaceutical ingredients (APIs) such as sex hormones (estrogens, androgens, and progestogens) and corticosteroids is currently performed by a combination of microbiological and chemical processes. Several mycobacterial strains capable of naturally metabolizing sterols (e.g., cholesterol, phytosterols) are used as biocatalysts to transform phytosterols into steroidal intermediates (synthons), which are subsequently used as key precursors to produce steroidal APIs in chemical processes. These synthons can also be modified by other microbial strains capable of introducing regio- and/or stereospecific modifications (functionalization) into steroidal molecules. Most of the industrial microbial strains currently available have been improved through traditional technologies based on physicochemical mutagenesis and selection processes. Surprisingly, Synthetic Biology and Systems Biology approaches have hardly been applied for this purpose. This review attempts to highlight the most relevant research on Steroid Biotechnology carried out in last decades, focusing specially on those works based on recombinant DNA technologies, as well as outlining trends and future perspectives. In addition, the need to construct new microbial cell factories (MCF) to design more robust and bio-sustainable bioprocesses with the ultimate aim of producing steroids à la carte is discussed.

Engineering Mycobacterium smegmatis for testosterone production.

A new biotechnological process for the production of testosterone (TS) has been developed to turn the model strain Mycobacterium smegmatis suitable for TS production to compete with the current chemical synthesis procedures. We have cloned and overexpressed two genes encoding microbial 17ß-hydroxysteroid: NADP 17-oxidoreductase, from the bacterium Comamonas testosteroni and from the fungus Cochliobolus lunatus. The host strains were M. smegmatis wild type and a genetic engineered androst-4-ene-3,17-dione (AD) producing mutant. The performances of the four recombinant bacterial strains have been tested both in growing and resting-cell conditions using natural sterols and AD as substrates respectively. These strains were able to produce TS from sterols or AD with high yields. This work represents a proof of concept of the possibilities that offers this model bacterium for the production of pharmaceutical steroids using metabolic engineering approaches.

Bioconversion of Phytosterols into Androstadienedione by Mycobacterium smegmatis CECT 8331.

The C19 steroid 1,4-androstadiene-3,17-dione (androstadienedione, ADD) is an added value product used as a synthon in the pharmaceutical industry for the commercial production of corticosteroids, mineralocorticoids, oral contraceptives, and other pharmaceutical steroids. Phytosterol biotransformation catalyzed by microbial whole cells is actually a very well-established research area in white biotechnology. The protocol below provides detailed information on ADD production by the mutant CECT 8331 of Mycobacterium smegmatis mc2155 using phytosterols as raw material in a lab scale. This protocol describes the bioconversion of phytosterols into ADD in a single fermentation step.

Mycobacterium smegmatis is a suitable cell factory for the production of steroidic synthons.

A number of pharmaceutical steroid synthons are currently produced through the microbial side-chain cleavage of natural sterols as an alternative to multi-step chemical synthesis. Industrially, these synthons have been usually produced through fermentative processes using environmental isolated microorganisms or their conventional mutants. Mycobacterium smegmatis mc2 155 is a model organism for tuberculosis studies which uses cholesterol as the sole carbon and energy source for growth, as other mycobacterial strains. Nevertheless, this property has not been exploited for the industrial production of steroidic synthons. Taking advantage of our knowledge on the cholesterol degradation pathway of M. smegmatis mc2 155 we have demonstrated that the MSMEG_6039 (kshB1) and MSMEG_5941 (kstD1) genes encoding a reductase component of the 3-ketosteroid 9α-hydroxylase (KshAB) and a ketosteroid Δ1 -dehydrogenase (KstD), respectively, are indispensable enzymes for the central metabolism of cholesterol. Therefore, we have constructed a MSMEG_6039 (kshB1) gene deletion mutant of M. smegmatis MS6039 that transforms efficiently natural sterols (e.g. cholesterol and phytosterols) into 1,4-androstadiene-3,17-dione. In addition, we have demonstrated that a double deletion mutant M. smegmatis MS6039-5941 [ΔMSMEG_6039 (ΔkshB1) and ΔMSMEG_5941 (ΔkstD1)] transforms natural sterols into 4-androstene-3,17-dione with high yields. These findings suggest that the catabolism of cholesterol in M. smegmatis mc2 155 is easy to handle and equally efficient for sterol transformation than other industrial strains, paving the way for valuating this strain as a suitable industrial cell factory to develop à la carte metabolic engineering strategies for the industrial production of pharmaceutical steroids.