Hydrobismuthation: Insertion of Unsaturated Hydrocarbons into the Heaviest Main Group Element Bond to Hydrogen.

The bismuth hydride (2,6-Mes2H3C6)2BiH (1, Mes = 2,4,6-trimethylphenyl), which has a Bi-H 1H NMR spectroscopic signal at δ = 19.64 ppm, was reacted with phenylacetylene at 60 °C in toluene to yield [(2,6-Mes2C6H3)2BiC(Ph)=CH2] (2) after 15 min. Compound 2 was characterized by 1H, 13C NMR, and UV-vis spectroscopy, single crystal X-ray crystallography, and calculations employing density functional theory. Compound 2 is the first example of a hydrobismuthation addition product and displays Markovnikov regioselectivity. Computational methods indicated that it forms via a radical mechanism with an associated Gibbs energy of activation of 91 kJ mol-1 and a reaction energy of -90 kJ mol-1.

Molecular Flexibility in Solvated Crystals of the Dimer, Au2(µ-1,2-bis(diphenylphosphino)ethane)2I2, with Three-Coordinate Gold(I).

We report the ability to trap the dimer Au2(µ-dppe)2I2 (dppe is 1,2-bis(diphenylphosphino)ethane) with different separations between the three-coordinate gold ions in crystalline solvates. All of these solvates ((Au2(µ-dppe)2I2·4(CH2Cl2) (1), Au2(µ-dppe)2I2·2(CH2Cl2) (2), the polymorphs α-Au2(µ-dppe)2I2·2(HC(O)NMe2) (3) and ß-Au2(µ-dppe)2I2·2(HC(O)NMe2) (4), and Au2(µ-dppe)2I2·4(CHCl3) (5)) along with polymeric {Au(µ-dppe)I}n·n(CHCl3) (6)) originated from the same reaction, only the solvent system used for crystallization differed. In the different solvates of Au2(µ-dppe)2I2, the Au···Au separation varied from 3.192(1) to 3.7866(3) Å. Computational studies undertaken to understand the flexible nature of these dimers indicated that the structural differences were primarily a result of crystal packing effects with aurophillic interactions having a minimal effect.

Desymmetrization of Cyclic Sulfonimidamides by Asymmetric Allylation.

Herein we report the first transition metal-catalyzed approach to the enantioenriched synthesis of cyclic sulfonimidamides relying on commercially available palladium catalysts and ligands. High-throughput experimentation (HTE) was employed to identify the optimal catalyst system and solvent. The method is applied to a variety of saturated and unsaturated rings and exhibits the highest selectivity for 2-substituted allyl electrophiles. The products are further elaborated to complex, tricyclic scaffolds. DFT experiments presented herein highlight the key ligand substrate interactions leading to the high levels of enantioselectivity.

Overcoming a Radical Polarity Mismatch in Strain-Release Pentafluorosulfanylation of [1.1.0]Bicyclobutanes: An Entryway to Sulfone- and Carbonyl-Containing SF5-Cyclobutanes.

The first assortment of achiral pentafluorosulfanylated cyclobutanes (SF5-CBs) are now synthetically accessible through strain-release functionalization of [1.1.0]bicyclobutanes (BCBs) using SF5Cl. Methods for both chloropentafluorosulfanylation and hydropentafluorosulfanylation of sulfone-based BCBs are detailed herein, as well as proof-of-concept that the logic extends to tetrafluoro(aryl)sulfanylation, tetrafluoro(trifluoromethyl)sulfanylation, and three-component pentafluorosulfanylation reactions. The methods presented enable isolation of both syn and anti isomers of SF5-CBs, but we also demonstrate that this innate selectivity can be overridden in chloropentafluorosulfanylation; that is, an anti-stereoselective variant of SF5Cl addition across sulfone-based BCBs can be achieved by using inexpensive copper salt additives. Considering the SF5 group and CBs have been employed individually as nonclassical bioisosteres, structural aspects of these unique SF5-CB "hybrid isosteres" were then contextualized using SC-XRD. From a mechanistic standpoint, chloropentafluorosulfanylation ostensibly proceeds through a curious polarity mismatch addition of electrophilic SF5 radicals to the electrophilic sites of the BCBs. Upon examining carbonyl-containing BCBs, we also observed rare instances whereby radical addition to the 1-position of a BCB occurs. The nature of the key C(sp3)-SF5 bond formation step - among other mechanistic features of the methods we disclose - was investigated experimentally and with DFT calculations. Lastly, we demonstrate compatibility of SF5-CBs with various downstream functionalizations.

Mn(II), Fe(II), and Co(II) Aryloxides: Steric and Dispersion Effects and the Thermal Rearrangement of a Cobalt Aryloxide to a Co(II) Semiquinone Complex.

A series of Mn(II), Fe(II), and Co(II) bisaryloxide dimers ([M(OC6H2-2,4,6-Cy3)2]2 {M = Mn (1), Fe (2), and Co (3)} were synthesized by the addition of 2,4,6-tricyclohexylphenol (HOC6H2-2,4,6-Cy3) to the silyl amido dimers [M(N(SiMe3)2)2]2 (M = Mn, Fe, Co; Cy = cyclohexyl). An unexpected and unique Co(II) phenoxide derivative (4), [Co(OC6H2-2,4,6-Cy3)(O2C6H-3,5,6-Cy3)]2, was obtained via ligand rearrangement of 3 at ca. 180 °C. This yielded 4 in which there are two unchanged, bridging phenoxide ligands as well as a terminal bidentate semiquinone ligand bound to each cobalt. Complexes 1 and 2 did not undergo such a rearrangement under the same conditions; both are thermally stable to temperatures exceeding 250 °C and feature numerous short-contact (<2.5 Å) H···H interactions consistent with the presence of dispersion stabilization. Use of the aryloxide ligand -OC6H3-2,6-Pri2 (Pri = isopropyl), which is sterically similar to -OC6H2-2,4,6-Cy3 but produces fewer close H···H interactions, gave the trimeric species [M(OC6H3-2,6-Pri2)2]3 {M = Fe (5) or Co (6)} which feature a linear array of three metal atoms bridged by aryloxides. The higher association number in 5 and 6 in comparison to that of 1-3 is due to the lower dispersion energy donor properties of the -OC6H3-2,6-Pri2 ligand and the lower stabilization it produces.

Reactions of Thianthrene and 10-Phenylphenothiazine with the Lewis Acids─Titanium Tetrachloride, Titanium Tetrabromide, Tin(IV) Tetrachloride, or Antimony(V) Pentachloride: The Competition between Coordination and Oxidation.

The oxidation of thianthrene and 10-phenylphenothiazine into cation radicals has been examined using redox-active Lewis acids. The reaction of titanium(IV) tetrachloride with thianthrene in toluene produces a solution with an EPR spectrum indicative of oxidation of thianthrene to a cation radical, but the molecular compound (1) (µ-thianthrene)Ti2(µ-Cl2)Cl6 crystallized exclusively. Red crystalline (2) (µ-thianthrene)Ti2(µ-Br2)Br6 formed similarly from titanium(IV) tetrabromide. In contrast, the reaction of antimony(V) pentachloride with thianthrene in toluene yielded crystalline (3) (thianthrene·+)2(Sb2(µ-Cl)2Cl62-)·(SbCl3), while the same reaction in acetonitrile produced crystals of (4) (thianthrene·+)(SbCl6-). The two paramagnetic salts differ in that in (3), the folded (thianthrene·+) cation radicals self-associate, whereas in (4), the (thianthrene·+) cation radicals are isolated from one another and are planar. The reaction of 10-phenylphenothiazine with titanium(IV) tetrachloride in toluene solution resulted in the formation of crystalline paramagnetic (5) (10-phenylphenothiazine·+)(Ti(µ-Cl)3Cl6-) and the reaction of 10-phenylphenothiazine with tin(IV) tetrachloride produced paramagnetic (6) (10-phenylphenothiazine·+)(SnCl5-).

Structure and Luminescence Studies of Salts of the Helical Dication, [Au2(µ-bis(diphenylphosphine)ethane)2]2+ and Comparison with Salts of [Au2(µ-bis(diphenylphosphine)propane)2]2.

Six salts ([Au2(µ-dppe)2](BF4)2·CHCl3, [Au2(µ-dppe)2](BF4)2·1,2-Cl2C2H4, [Au2(µ-dppe)2](PF6)2·CHCl3, [Au2(µ-dppe)2](PF6)2, [Au2(µ-dppe)2](SbF6)2, and [Au2(µ-dppe)2](OTf)2·2CHCl3), (dppe is bis(diphenylphosphine)ethane) containing the dication, [Au2(µ-dppe)2]2+, have been prepared and structurally characterized by single-crystal X-ray crystallography. Unlike the three-coordinate dppe-bridged dimers, Au2X2(µ-dppe)2 (X = Br, I), which show considerable variation in the distance between the gold(I) ions over the range 3.0995(10) to 3.8479(3) Å in various solvates, the structure of the helical dication, [Au2(µ-dppe)2], in the new salts is remarkably consistent with the Au···Au separation falling in the narrow range 2.8787(9) to 2.9593(5) Å. In the solid state, the six crystals display a green luminescence both at room temperature and at 77 K, which has been assigned as phosphorescence. However, solutions of the dication are not luminescent. Salts containing the analogous dication [Au2(µ-dppp)2](PF6)2 (dppp is bis(diphenylphosphine)propane) have been prepared to determine whether the longer bridging ligand might also twist into a helical shape. These salts include [Au2(µ-dppp)2](OTf)2 (OTf is triflate) and three crystalline forms of [Au2(µ-dppp)2](PF6)2: the solvate [Au2(µ-dppp)2](PF6)2·(CHCl3) and two polymorphs of the unsolvated salt. None of these crystals are luminescent, but all contain a similar dication, [Au2(µ-dppp)2]2+, that contains two nearly parallel, linear P-Au-P groups and a long separation between the gold ions that varies from 5.3409(4) to 5.6613(6)Å.

Tuning the Intermediate Valence Behavior in the Zintl Compound Yb14ZnSb11 by Incorporation of RE3+ [Yb14-xRExZnSb11 (0.2 ≤ x ≤ 0.7), RE = Sc, Y, La, Lu and Gd].

The solid solutions of Yb14-xRExZnSb11 (RE = Sc, Y, La, Lu, and Gd; 0.2 ≤ x ≤ 0.7) were prepared to probe the intermediate valency of Yb in Yb14ZnSb11. The substitution of Yb with RE3+ elements should reduce or remove the intermediate valency of the remaining Yb ions. Large crystals are grown from Sn-flux, and the structure and magnetic susceptibility are presented. All compounds crystallize in the Ca14AlSb11 structure type and the RE3+ ions show Yb site substitution preferences that correlate with size. Two compositions of Yb14-xYxZnSb11 were investigated [x = 0.38(3), 0.45(3)] by temperature-dependent magnetic susceptibility and the broad feature in magnetic susceptibility measurements at 85 K in pristine Yb14ZnSb11 attributed to valence fluctuation decreases and is absent for x = 0.45(3). In compounds with nonmagnetic RE3+ substitutions (Sc, Y, La, and Lu), temperature-dependent magnetic susceptibility shows a transition from intermediate valency fluctuation toward temperature-independent (Y, La, and Lu) or Curie-Weiss behavior and possibly low temperature heavy Fermion behavior (Sc). In the example of the magnetic rare earth substitution, RE = Gd, the Curie-Weiss-dependent magnetic moment of Gd3+ is consistent with x. Hall resistivity of Yb14-xYxZnSb11 showed that the carrier concentration decreases with x and the signature of the low-T intermediate valence state seen for x = 0 is suppressed for x = 0.38 and gone for x = 0.45.

London Dispersion Effects in a Distannene/Tristannane Equilibrium: Energies of their Interconversion and the Suppression of the Monomeric Stannylene Intermediate.

Reaction of {LiC6 H2 -2,4,6-Cyp3 ⋅Et2 O}2 (Cyp=cyclopentyl) (1) of the new dispersion energy donor (DED) ligand, 2,4,6-triscyclopentylphenyl with SnCl2 afforded a mixture of the distannene {Sn(C6 H2 -2,4,6-Cyp3 )2 }2 (2), and the cyclotristannane {Sn(C6 H2 -2,4,6-Cyp3 )2 }3 (3). 2 is favored in solution at higher temperature (345 K or above) whereas 3 is preferred near 298 K. Van't Hoff analysis revealed the 3 to 2 conversion has a ΔH=33.36 kcal mol-1 and ΔS=0.102 kcal mol-1 K-1 , which gives a ΔG300 K =+2.86 kcal mol-1 , showing that the conversion of 3 to 2 is an endergonic process. Computational studies show that DED stabilization in 3 is -28.5 kcal mol-1 per {Sn(C6 H2 -2,4,6-Cyp3 )2 unit, which exceeds the DED energy in 2 of -16.3 kcal mol-1 per unit. The data clearly show that dispersion interactions are the main arbiter of the 3 to 2 equilibrium. Both 2 and 3 possess large dispersion stabilization energies which suppress monomer dissociation (supported by EDA results).

Direct Crystallization of Diamine Radical Cations: Carbon-Nitrogen Bond Formation from the Reaction of Triphenylamine with TiCl4 , TiBr4 , or SnCl4 versus Carbon-Carbon Bond Formation with SbCl5.

Direct synthesis of diamine radical cations in crystalline form proceeding through oxidation of triphenylamine followed by the formation of a new C-N bond is reported. Although the oxidative coupling of triphenylamine is well studied, diamine products are rarely captured in their radical cation state. The neutral diamine most frequently obtained from this reaction pathway is N,N,N',N'-tetraphenylbenzidine. Herein, the capture of radical cations of diamines in crystalline form in one step starting with neutral triphenylamine was demonstrated, and the formation of two products (the radical cations of N,N,N',N'-tetraphenyl-1,4-benzenediamine or N,N,N',N'-tetraphenylbenzidine) depending on the oxidizing agent used was observed. The radical species are characterized by single-crystal X-Ray diffraction, electron paramagnetic resonance spectroscopy, and optical spectroscopy.

1,3-Asymmetric Induction in Diastereoselective Allylations of Chiral N-Tosyl Imines.

Lewis acid mediated allylations of ß-alkoxy N-tosyl imines using allyltrimethylsilane lead to 3-alkoxy homoallylic N-tosyl amines with anti-selectivity. Two methods of Cu(OTf)2-mediated allylations are reported herein, demonstrating that diastereoselectivity can be achieved through 1,3 acyclic stereocontrol of ß-chiral aldimines. Observed selectivity trends and computational evidence suggest selectivity arises through the formation of a six-membered ring chelate. The product ratios of these allylations are dependent on conformational preferences of the chelate and steric effects in the transition-state structures.

One-Pot Assembly and Synthetic Applications of Geminal Acyl/Alkoxy Tetrasubstituted Allenes.

Polysubstituted allenes are useful synthetic intermediates in many applications, offering structural complexity, modularity, and their axial chirality in further transformations. While acyl and alkoxy-substituted allenes are known, there are currently few examples of allenes containing both functionalities and no reports of geminally substituted acyl/alkoxy allenes being isolated and characterized. Herein, we report the synthesis of tetrasubstituted allenes featuring a novel geminal acyl/alkoxy substitution. These unique "push-pull" allenes are bench-stable and exhibit interesting reactivity in several applications.

Divergent Asymmetric Synthesis of Panowamycins, TM-135, and Veramycin†F Using C-H Insertion with Donor/Donor Carbenes.

Panowamycins are a group of isochroman-based natural products first isolated from Streptomyces sp. K07-0010 in 2012 by Satoshi Omura and co-workers that exhibit modest anti-trypanosomal activity. Herein we demonstrate the first syntheses of these natural products and their epimers. Stereoselective dirhodium-catalyzed C-H insertion reactions with a donor/donor carbene construct the substituted isochroman core in the key bond-forming step. The syntheses are completed without the use of protecting groups and feature a late-stage Wacker oxidation. Incongruent NMR spectra between natural and synthetic samples revealed the structural misassignment of panowamycin A and veramycin F. Computational NMR studies suggested panowamycin A to be an alternate diastereomer, which was confirmed by synthesizing this isomer. Concurrent with this work, in 2021 Mahmud and co-workers came to the same conclusion with an updated NMR analysis of panowamycin A. In a divergent, asymmetric sequence, we report the synthesis of panowamycin A, panowamycin B, TM-135, and veramycin F.

Inhibition of Alkali Metal Reduction of 1-Adamantanol by London Dispersion Effects.

A series of alkali metal 1-adamantoxide (OAd1 ) complexes of formula [M(OAd1 )(HOAd1 )2 ], where M=Li, Na or K, were synthesised by reduction of 1-adamantanol with excess of the alkali metal. The syntheses indicated that only one out of every three HOAd1 molecules was reduced. An X-ray diffraction study of the sodium derivative shows that the complex features two unreduced HOAd1 donors as well as the reduced alkoxide (OAd1 ), with the Ad1 fragments clustered together on the same side of the NaO3 plane, contrary to steric considerations. This is the first example of an alkali metal reduction of an alcohol that is inhibited from completion due to the formation of the [M(OAd1 )(HOAd1 )2 ] complexes, stabilized by London dispersion effects. NMR spectroscopic studies revealed similar structures for the lithium and potassium derivatives. Computational analyses indicate that decisive London dispersion effects in the molecular structure are a consequence of the many C-H⋅⋅⋅H-C interactions between the OAd1 groups.

Strain-Release Pentafluorosulfanylation and Tetrafluoro(aryl)sulfanylation of [1.1.1]Propellane: Reactivity and Structural Insight.

We leveraged the recent increase in synthetic accessibility of SF5 Cl and Ar-SF4 Cl compounds to combine chemistry of the SF5 and SF4 Ar groups with strain-release functionalization. By effectively adding SF5 and SF4 Ar radicals across [1.1.1]propellane, we accessed structurally unique bicyclopentanes, bearing two distinct elements of bioisosterism. Upon evaluating these "hybrid isostere" motifs in the solid state, we measured exceptionally short transannular distances; in one case, the distance rivals the shortest nonbonding C⋅⋅⋅C contact reported to date. This prompted SC-XRD and DFT analyses that support the notion that a donor-acceptor interaction involving the "wing" C-C bonds is playing an important role in stabilization. Thus, these heretofore unknown structures expand the palette for highly coveted three-dimensional fluorinated building blocks and provide insight to a more general effect observed in bicyclopentanes.

Molecular determinants of pro-arrhythmia proclivity of d- and l-sotalol via a multi-scale modeling pipeline.

Drug isomers may differ in their proarrhythmia risk. An interesting example is the drug sotalol, an antiarrhythmic drug comprising d- and l- enantiomers that both block the hERG cardiac potassium channel and confer differing degrees of proarrhythmic risk. We developed a multi-scale in silico pipeline focusing on hERG channel - drug interactions and used it to probe and predict the mechanisms of pro-arrhythmia risks of the two enantiomers of sotalol. Molecular dynamics (MD) simulations predicted comparable hERG channel binding affinities for d- and l-sotalol, which were validated with electrophysiology experiments. MD derived thermodynamic and kinetic parameters were used to build multi-scale functional computational models of cardiac electrophysiology at the cell and tissue scales. Functional models were used to predict inactivated state binding affinities to recapitulate electrocardiogram (ECG) QT interval prolongation observed in clinical data. Our study demonstrates how modeling and simulation can be applied to predict drug effects from the atom to the rhythm for dl-sotalol and also increased proarrhythmia proclivity of d- vs. l-sotalol when accounting for stereospecific beta-adrenergic receptor blocking.

Designing a Solution-Stable Distannene: The Decisive Role of London Dispersion Effects in the Structure and Properties of {Sn(C6H2-2,4,6-Cy3)2}2 (Cy = Cyclohexyl).

The reaction of 1 equiv of the dimeric lithium salt of a new London dispersion effect donor ligand {Li(C6H2-2,4,6-Cy3)·OEt2}2 (Cy = cyclohexyl) with SnCl2 afforded the distannene {Sn(C6H2-2,4,6-Cy3)2}2 (1). The distannene remains dimeric in solution, as indicated by its room-temperature 119Sn NMR signal (δ = 361.3 ppm) and its electronic spectrum, which is invariant over the temperature range of -10 to 100 °C. The formation of the distannene, which has a short Sn-Sn distance of 2.7005(7) Å and greatly enhanced stability in solution compared to that of other distannenes, is due to increased interligand London dispersion (LD) attraction arising from multiple close approaches of ligand C-H moieties across the Sn-Sn bond. DFT-D4 calculations revealed a dispersion stabilization of dimer 1 of 38 kcal mol-1 and a dimerization free energy of ΔGdimer = -6 kcal mol-1. In contrast, the reaction of 2 equiv of the similarly shaped but less bulky, less hydrogen-rich Li(C6H2-2,4,6-Ph3)·(OEt2)2 with SnCl2 yielded the monomeric stannylene Sn(C6H2-2,4,6-Ph3)2 (2), which is unstable in solution at ambient temperature.

A Monomeric Aluminum Imide (Iminoalane) with Al-N Triple-Bonding: Bonding Analysis and Dispersion Energy Stabilization.

The reaction of :AlAriPr8 (AriPr8 = C6H-2,6-(C6H2-2,4,6-iPr3)2-3,5-iPr2) with ArMe6N3 (ArMe6 = C6H3-2,6-(C6H2-2,4,6-Me3)2) in hexanes at ambient temperature gave the aluminum imide AriPr8AlNArMe6 (1). Its crystal structure displayed short Al-N distances of 1.625(4) and 1.628(3) Å with linear (C-Al-N-C = 180°) or almost linear (C-Al-N = 172.4(2)°; Al-N-C = 172.5(3)°) geometries. DFT calculations confirm linear geometry with an Al-N distance of 1.635 Å. According to energy decomposition analysis, the Al-N bond has three orbital components totaling -1350 kJ mol-1 and instantaneous interaction energy of -551 kJ mol-1 with respect to :AlAriPr8 and ArMe6N̈:. Dispersion accounts for -89 kJ mol-1, which is similar in strength to one Al-N π-interaction. The electronic spectrum has an intense transition at 290 nm which tails into the visible region. In the IR spectrum, the Al-N stretching band is calculated to appear at ca. 1100 cm-1. In contrast, reaction of :AlAriPr8 with 1-AdN3 or Me3SiN3 gave transient imides that immediately reacted with a second equivalent of the azide to give AriPr8Al[(NAd)2N2] (2) or AriPr8Al(N3){N(SiMe3)2} (3).

Mechanistic Investigation of Castagnoli-Cushman Multicomponent Reactions Leading to a Three-Component Synthesis of Dihydroisoquinolones.

The mechanisms for the three- and four-component variants of the Castagnoli-Cushman reaction (CCR) have been investigated. A series of crossover experiments were conducted to probe the structure and reactivity of known amide-acid intermediates for the three- and four-component variants of the CCR (3CR and 4CR, respectively). Control experiments paired with in situ reaction monitoring with infrared spectroscopy for the 4CR align with a mechanism in which amide-acids derived from maleic anhydride can reversibly form free amine and cyclic anhydride. Although this equilibrium is unfavorable, the aldehyde present can trap the primary amine through imine formation and react with the enol form of the anhydride through a Mannich-like mechanism. This detailed mechanistic investigation coupled with additional crossover experiments supports an analogous mechanism for the 3CR and has led to the elucidation of new 3CR conditions with homophthalic anhydride, amines, and aldehydes for the formation of dihydroisoquinolones in good yields and excellent diastereoselectivity. This work represents the culmination of more than a decade of mechanistic speculation for the 3- and 4CR, enabling the design of new multicomponent reactions that exploit this novel mechanism.

Low-Coordinate Iron Chalcogenolates and Their Complexes with Diethyl Ether and Ammonia.

Treatment of Fe{N(SiMe3)2}2 with 2 equiv of the appropriate phenol or thiol affords the dimers {Fe(OC6H2-2,6-But2-4-Me)2}2 (1) and {Fe(OC6H3-2,6-But2)2}2 (2) or the monomeric Fe{SC6H3-2,6-(C6H3-2,6-Pri2)2}2 (3) in moderate to excellent yields. Recrystallization of 1 and 2 from diethyl ether gives the corresponding three-coordinate ether complexes Fe(OC6H3-2,6-But2-4-Me)2(OEt2) (4) and Fe(OC6H3-2,6-But2)2(OEt2) (5). In contrast, no diethyl ether complex is formed by the dithiolate 3. The 1H NMR spectra of 4 and 5 show equilibria between the ether complexes and the base-free dimers. A comparison of these spectra with those of the dimeric 1 and 2 allows an unambiguous assignment of the paramagnetically shifted signals. Treatment of 1 with excess ammonia gives the tetrahedral diammine Fe(OC6H2-2,6-But2-4-Me)2(NH3)2 (6). Ammonia is strongly coordinated in 6, with no apparent loss of ammine ligand either in solution or upon heating under low pressure. In contrast, significantly weaker ammonia coordination is observed when dithiolate 3 is treated with excess ammonia, which gives the diammine Fe{SC6H3-2,6-(2,6-Pri2-C6H3)2}2(NH3)2 (7). Complex 7 readily loses ammonia either in solution or under reduced pressure to give the monoammine complex Fe{SC6H3-2,6-(2,6-Pri2-C6H3)2}2(NH3) (8). The weak binding of ammonia by iron thiolate 7 reflects the likely behavior of the proposed iron-sulfur active site in nitrogenases, where release of ammonia is required to close the catalytic cycle.