Mechanisms of umami taste perception: From molecular level to brain imaging.

Due to unique characteristics, umami substances have gained much attention in the food industry during the past decade as potential replacers to sodium or fat to increase food palatability. Umami is not only known to increase appetite, but also to increase satiety, and hence could be used to control food intake. Therefore, it is important to understand the mechanism(s) involved in umami taste perception. This review discusses current knowledge of the mechanism(s) of umami perception from receptor level to human brain imaging. New findings regarding the molecular mechanisms for detecting umami tastes and their pathway(s), and the peripheral and central coding to umami taste are reviewed. The representation of umami in the human brain and the individual variation in detecting umami taste and associations with genotype are discussed. The presence of umami taste receptors in the gastrointestinal tract, and the interactions between the brain and gut are highlighted. The review concludes that more research is required into umami taste perception to include not only oral umami taste perception, but also the wider "whole body" signaling mechanisms, to explore the interaction between the brain and gut in response to umami perception and ingestion.

Probing the effect of aroma compounds on the hydrodynamic properties of mucin glycoproteins.

Aroma compounds are diverse low molecular weight organic molecules responsible for the flavour of food, medicines or cosmetics. Natural and artificial aroma compounds are manufactured and used by the industry to enhance the flavour and fragrance of products. While the low concentrations of aroma compounds present in food may leave no effect on the structural integrity of the mucosa, the effect of concentrated aroma volatiles is not well understood. At high concentrations, like those found in some flavoured products such as e-cigarettes, some aroma compounds are suggested to elicit a certain degree of change in the mucin glycoprotein network, depending on their functional group. These effects are particularly associated with carbonyl compounds such as aldehydes and ketones, but also phenols which may interact with mucin and other glycoproteins through other interaction mechanisms. This study demonstrates the formation of such interactions in vitro through the use of molecular hydrodynamics. Sedimentation velocity studies reveal that the strength of the carbonyl compound interaction is influenced by compound hydrophobicity, in which the more reactive short chain compounds show the largest increase in mucin-aroma sedimentation coefficients. By contrast, the presence of groups that increases the steric hindrance of the carbonyl group, such as ketones, produced a milder effect. The interaction effects were further demonstrated for hexanal using size exclusion chromatography light scattering (SEC-MALS) and intrinsic viscosity. In addition, phenolic aroma compounds were identified to reduce the sedimentation coefficient of mucin, which is consistent with interactions in the non-glycosylated mucin region.

Rapid prediction of single green coffee bean moisture and lipid content by hyperspectral imaging.

Hyperspectral imaging (1000-2500 nm) was used for rapid prediction of moisture and total lipid content in intact green coffee beans on a single bean basis. Arabica and Robusta samples from several growing locations were scanned using a "push-broom" system. Hypercubes were segmented to select single beans, and average spectra were measured for each bean. Partial Least Squares regression was used to build quantitative prediction models on single beans (n = 320-350). The models exhibited good performance and acceptable prediction errors of ∼0.28% for moisture and ∼0.89% for lipids. This study represents the first time that HSI-based quantitative prediction models have been developed for coffee, and specifically green coffee beans. In addition, this is the first attempt to build such models using single intact coffee beans. The composition variability between beans was studied, and fat and moisture distribution were visualized within individual coffee beans. This rapid, non-destructive approach could have important applications for research laboratories, breeding programmes, and for rapid screening for industry.

The effect of adenosine monophosphate deaminase overexpression on the accumulation of umami-related metabolites in tomatoes.

KEY MESSAGE: This study highlights the changes in umami-related nucleotide and glutamate levels when the AMP deaminase gene was elevated in transgenic tomato. Taste is perceived as one of a combination of five sensations, sweet, sour, bitter, salty, and umami. The umami taste is best known as a savoury sensation and plays a central role in food flavour, palatability, and eating satisfaction. Umami flavour can be imparted by the presence of glutamate and is greatly enhanced by the addition of ribonucleotides, such as inosine monophosphate (IMP) and guanosine monophosphate (GMP). The production of IMP is regulated by the enzyme adenosine monophosphate (AMP) deaminase which functions to convert AMP into IMP. We have generated transgenic tomato (Solanum lycopersicum) lines over expressing AMP deaminase under the control of a fruit-specific promoter. The transgenic lines showed substantially enhanced levels of AMP deaminase expression in comparison to the wild-type control. Elevated AMP deaminase levels resulted in the reduced accumulation of glutamate and increased levels of the umami nucleotide GMP. AMP concentrations were unchanged. The effects on the levels of glutamate and GMP were unexpected and are discussed in relation to the metabolite flux within this pathway.

Effects of aroma and taste, independently or in combination, on appetite sensation and subsequent food intake.

Food flavour is important in appetite control. The effects of aroma and taste, independently or in combination, on appetite sensation and subsequent food intake, were studied. Twenty-six females (24 ± 4 years, 20.9 ± 1.9 kg⋅m-2) consumed, over 15 min period, one of four sample drinks as a preload, followed by an ad libitum consumption of a pasta meal (after 65 min). Sample drinks were: water (S1, 0 kcal), water with strawberry aroma (S2, 0 kcal), water with sucrose and citric acid (S3, 48 kcal) and water with strawberry aroma, sucrose and citric acid (S4, 48 kcal). Appetite sensation did not differ between the S1 (water), S2 (aroma) and S3 (taste) conditions. Compared with S1 (water), S2 (aroma) and S3 (taste), S4 (aroma + taste) suppressed hunger sensation over the 15 min sample drink consumption period (satiation) (p < 0.05). S4 (aroma + taste) further reduced hunger sensation (satiety) more than S1 at 5, 20 and 30 min after the drink was consumed (p < 0.05), more than S2 (aroma) at 5 and 20 min after the drink was consumed (p < 0.05), and more than S3 (taste) at 5 min after the drink was consumed (p < 0.05). Subsequent pasta energy intake did not vary between the sample drink conditions. S4 (aroma + taste) had the strongest perceived flavour. This study suggests that the combination of aroma and taste induced greater satiation and short-term satiety than the independent aroma or taste and water, potentially via increasing the perceived flavour intensity or by enhancing the perceived flavour quality and complexity as a result of aroma-taste cross-modal perception.

Optimisation of octinyl succinic anhydride starch stablised w1/o/w2 emulsions for oral destablisation of encapsulated salt and enhanced saltiness.

Sodium (salt) was encapsulated within the inner water phase of w1/o/w2 food emulsions externally stabilised by starch particles with the ultimate aim of enhancing saltiness perception. The physical properties of the starch particles were modified by octenyl succinic anhydride (OSA) treatment (0-3%) to vary the degree of hydrophobicity of the emulsifying starch. During oral processing native salivary amylase hydrolysed the starch and destabilised the o/w emulsion releasing the inner w/o phase and subsequently sodium into the oral cavity, resulting in a salty taste. Whilst increasing OSA treatment levels increased the stability of the emulsion, intermediate or low levels of starch modification resulted in enhanced saltiness. It is therefore proposed that 1.5% OSA modified starch is optimal for sodium delivery and 2% OSA modified starch is optimal for sodium delivery in systems that require greater process stability. It is also shown that sodium release was further enhanced by oral processing and was positively correlated with native amylase activity. The results demonstrate a promising new approach for the reduction of salt or sugar in emulsion based foods.

Stability of Lactobacillus rhamnosus GG incorporated in edible films: Impact of anionic biopolymers and whey protein concentrate.

The incorporation of probiotics and bioactive compounds, via plasticised thin-layered hydrocolloids, within food products has recently shown potential to functionalise and improve the health credentials of processed food. In this study, choice of polymer and the inclusion of whey protein isolate was evaluated for their ability to stabalise live probiotic organisms. Edible films based on low (LSA) and high (HSA) viscosity sodium alginate, low esterified amidated pectin (PEC), kappa-carrageenan/locust bean gum (κ-CAR/LBG) and gelatine (GEL) in the presence or absence of whey protein concentrate (WPC) were shown to be feasible carriers for the delivery of L. rhamnosus GG. Losses of L. rhamnosus GG throughout the drying process ranged from 0.87 to 3.06 log CFU/g for the systems without WPC, losses were significantly reduced to 0 to 1.17 log CFU/g in the presence of WPC. Storage stability (over 25d) of L. rhamnosus GG at both tested temperatures (4 and 25 °C), in descending order, was κ-CAR/LBG > HSA > GEL > LSA = PEC. In addition, supplementation of film forming agents with WPC led to a 1.8- to 6.5-fold increase in shelf-life at 4 °C (calculated on the WHO/FAO minimum requirements of 6 logCFU/g), and 1.6-4.3-fold increase at 25 °C. Furthermore probiotic films based on HSA/WPC and κ-CAR/LBG/WPC blends had both acceptable mechanical and barrier properties.

Non-destructive characterisation of mesenchymal stem cell differentiation using LC-MS-based metabolite footprinting.

Bone regeneration is a complex biological process where major cellular changes take place to support the osteogenic differentiation of mesenchymal bone progenitors. To characterise these biological changes and better understand the pathways regulating the formation of mature bone cells, the metabolic profile of mesenchymal stem cell (MSC) differentiation in vitro has been assessed non-invasively during osteogenic (OS) treatment using a footprinting technique. Liquid chromatography (LC)-mass spectrometry (MS)-based metabolite profiling of the culture medium was carried out in parallel to mineral deposition and alkaline phosphatase activity which are two hallmarks of osteogenesis in vitro. Metabolic profiles of spent culture media with a combination of univariate and multivariate analyses investigated concentration changes of extracellular metabolites and nutrients linked to the presence of MSCs in culture media. This non-invasive LC-MS-based analytical approach revealed significant metabolic changes between the media from control and OS-treated cells showing distinct effects of MSC differentiation on the environmental footprint of the cells in different conditions (control vs. OS treatment). A subset of compounds was directly linked to the osteogenic time-course of differentiation, and represent interesting metabolite candidates as non-invasive biomarkers for characterising the differentiation of MSCs in a culture medium.

Compositional and physicochemical factors governing the viability of Lactobacillus rhamnosus GG embedded in starch-protein based edible films.

Probiotic incorporation in edible films and coatings has been shown recently to be an efficient strategy for the delivery of probiotics in foods. In the present work, the impact of the compositional, physicochemical and structural properties of binary starch-protein edible films on Lactobacillus rhamnosus GG viability and stability was evaluated. Native rice and corn starch, as well as bovine skin gelatine, sodium caseinate and soy protein concentrate were used for the fabrication of the probiotic edible films. Starch and protein type both impacted the structural, mechanical, optical and thermal properties of the films, and the process loss of L. rhamnosus GG during evaporation-dehydration was significantly lower in the presence of proteins (0.91-1.07 log CFU/g) compared to solely starch based systems (1.71 log CFU/g). A synergistic action between rice starch and proteins was detected when monitoring the viability of L. rhamnosus GG over four weeks at fridge and room temperature conditions. In particular, a 3- to 7-fold increase in the viability of L. rhamnosus GG was observed in the presence of proteins, with sodium caseinate - rice starch based films offering the most enhanced stability. The film's shelf-life (as calculated using the FAO/WHO (2011) basis of 6 log viable CFU/g) ranged between 27-96 and 15-24 days for systems stored at fridge or room temperature conditions respectively.

Ice Cream as a Vehicle for Incorporating Health-Promoting Ingredients: Conceptualization and Overview of Quality and Storage Stability.

Ice cream is a product with peculiar textural and organoleptic features and is highly appreciated by a very broad spectrum of consumers. Ice cream's structure and colloidal design, together with its low-temperature storage, renders it a very promising carrier for the stabilization and in vivo delivery of bioactive compounds and beneficial microorganisms. To date, many applications related to the design and development of functional ice cream have been documented, including products containing probiotics, prebiotics, synbiotics, dietary fibers, natural antioxidants such as polyphenols, essential and polyunsaturated fatty acids, and low glycemic index blends and blends fortified with mineral or trace elements. In this review, promising strategies for the incorporation of innovative functional additives to ice cream through the use of techniques such as microencapsulation, nanoemulsions, and oleogels are discussed, and current insights into the implications of matrix, processing, and digestion on bioactive compounds in frozen dairy desserts are comprehensively reviewed, thereby providing a holistic overview of the current and emerging trends in this functional food sector.

Entrapment of a volatile lipophilic aroma compound (d-limonene) in spray dried water-washed oil bodies naturally derived from sunflower seeds (Helianthus annus).

Oil bodies are natural emulsions that can be extracted from oil seeds and have previously been shown to be stable after spray drying. The aim of the study was to evaluate for the first time if spray dried water-washed oil bodies are an effective carrier for volatile lipophilic actives (the flavour compound d-limonene was used as an example aroma compound). Water-washed oil bodies were blended with maltodextrin and d-limonene and spray dried using a Buchi B-191 laboratory spray dryer. Lipid and d-limonene retention was 89-93% and 24-27%. Samples were compared to processed emulsions containing sunflower oil and d-limonene and stabilised by either lecithin or Capsul. Lecithin and Capsul processed emulsions had a lipid and d-limonene retention of 82-89%, 7.7-9.1% and 48-50%, 55-59% respectively indicating that water-washed oil bodies could retain the most lipids and Capsul could retain the most d-limonene. This indicates that whilst additional emulsifiers may be required for future applications of water-washed oil bodies as carriers of lipophilic actives, oil bodies are excellent agents for lipid encapsulation.

The role of plant vasculature in tackling N2O emissions.

Rising demand for protein-rich foods can impact N2O emissions from croplands. Recent research has pointed to the role of modified plant vasculature in grain protein increase. Here we highlight how discovering the mechanistic role of plant vasculature in protein improvement and nitrogen-use efficiency could reduce global N2O emissions.

Effect of sweeteners and carbonation on aroma partitioning and release in beverage systems.

The effect of monosaccharides (glucose, fructose and galactose) and disaccharides (sucrose and lactose) at 10, 20 and 30 % w/v on the in-vitro aroma partitioning of C4 - C10 aldehydes and ethyl esters, as well as limonene (concentration of aroma compounds at 1 µg mL-1), was studied using atmospheric pressure chemical ionisation-mass spectrometry. An increase in sugar concentration from 0 to 30 % w/v resulted in a significant increase in partitioning under static headspace conditions for the majority of the compounds (p < 0.05), an effect generally not observed when 10 % w/v sucrose was substituted with low-calorie sweeteners (p > 0.05). The complexity of the system was increased to model a soft drink design - comprising water, sucrose (10, 20 and 30 % w/v), acid (0.15 % w/v), carbonation (∼7.2 g/L CO2) and aroma compounds representative of an apple style flavouring, namely ethyl butanoate and hexanal (10 µg mL-1 each). Although the addition of sucrose had no significant in-vivo effect, carbonation significantly decreased breath-by-breath (in-vivo) aroma delivery (p < 0.05). To understand the physical mechanisms behind aroma release from the beverage matrix, the effect of sucrose on the kinetics of the matrix components was explored. An increase in sucrose concentration from 0 to 30 % w/v resulted in a significant decrease in water activity (p < 0.05), which accounted for the significantly slower rate of self-diffusion of aroma compounds (p < 0.05), measured using diffusion-ordered spectroscopy-nuclear magnetic resonance spectroscopy. No significant effect of sucrose on carbon dioxide volume flux was found (p > 0.05).

Effects of agro-forestry systems on the physical and chemical characteristics of green coffee beans.

Twenty agroforestry systems consisting of different management practices (conventional and organic) and shade types were set up for coffee plantations in 2,000 at the Tropical Agricultural Research and Higher Education Center (CATIE), Turrialba, Costa Rica. The physical (density, bulk density, moisture content, and roasting loss) and chemical attributes (mineral, total lipid, fatty acids, caffeine, and carbohydrate contents) of harvested green coffee beans were investigated. The full sun and Erythrina shade tree systems significantly improved (p < 0.05) the density of the green coffee beans and decreased (p < 0.05) the moisture content and roasting loss of the green coffee beans. The intensive organic (IO) management practice significantly increased some mineral contents, such as K, P, and Ca, in green coffee beans. The full sun system also significantly promoted (p < 0.05) some mineral contents, such as Ca and Mn, in green coffee beans. In terms of total lipid and fatty acids (FAs), compared with the moderate conventional (MC) management practice, the IO management practice was beneficial as it significantly increased (p < 0.05) the total lipid and FAs contents in the green coffee beans, while the Erythrina shade tree system significantly increased (p < 0.05) the total lipid and FAs contents of green coffee beans more efficiently than the other shade types. The caffeine content of green coffee beans was significantly higher (p < 0.05) under the intensive conventional (IC) and IO management practices than under the MC management practice and higher under the full sun system than under the shaded system. The Erythrina shade tree system significantly improved (p < 0.05) the carbohydrate content of green coffee beans. Overall, in consideration of sustainability, the IO management practice associated with the Erythrina shade tree system would be a useful combination for the local farmers to grow coffee trees.

Challenges facing sustainable protein production: Opportunities for cereals.

Rising demands for protein worldwide are likely to drive increases in livestock production, as meat provides ∼40% of dietary protein. This will come at a significant environmental cost, and a shift toward plant-based protein sources would therefore provide major benefits. While legumes provide substantial amounts of plant-based protein, cereals are the major constituents of global foods, with wheat alone accounting for 15-20% of the required dietary protein intake. Improvement of protein content in wheat is limited by phenotyping challenges, lack of genetic potential of modern germplasms, negative yield trade-offs, and environmental costs of nitrogen fertilizers. Presenting wheat as a case study, we discuss how increasing protein content in cereals through a revised breeding strategy combined with robust phenotyping could ensure a sustainable protein supply while minimizing the environmental impact of nitrogen fertilizer.

Reviving grain quality in wheat through non-destructive phenotyping techniques like hyperspectral imaging.

A long-term goal of breeders and researchers is to develop crop varieties that can resist environmental stressors and produce high yields. However, prioritising yield often compromises improvement of other key traits, including grain quality, which is tedious and time-consuming to measure because of the frequent involvement of destructive phenotyping methods. Recently, non-destructive methods such as hyperspectral imaging (HSI) have gained attention in the food industry for studying wheat grain quality. HSI can quantify variations in individual grains, helping to differentiate high-quality grains from those of low quality. In this review, we discuss the reduction of wheat genetic diversity underlying grain quality traits due to modern breeding, key traits for grain quality, traditional methods for studying grain quality and the application of HSI to study grain quality traits in wheat and its scope in breeding. Our critical review of literature on wheat domestication, grain quality traits and innovative technology introduces approaches that could help improve grain quality in wheat.

Sensory perception and consumer acceptance of commercial and salt-reduced potato crisps formulated using salt reduction design rules.

Successful salt (NaCl) reduction strategies are required to reduce the salt content of snacks while maintaining saltiness perception and consumer acceptance. Previous research suggests that particle physicochemical design rules (small particle size, low density, low hydrophobicity, optimised particle shape) can be leveraged to produce salt particles that enhance saltiness perception. This study aimed to validate these design rules by applying optimised model salts to unsalted potato crisps at a 30% reduced salt content to produce prototype products. A selection of commercial products were also chosen to represent the salt content and crisp style of the broader market, with the aim to investigate the potential of other salt reduction strategies including; direct salt removal without compensation for loss of salt content and increasing time in mouth, while exploring the impact of consumer mouth behaviour type on consumer product preference. Nine products varying in salt content (6 standard, 1 crinkle-cut, 1 thick-cut batch-fried, 1 baked reconstituted potato) were subject to descriptive sensory analysis with a trained panel (n = 11). A subset (seven products) were assessed for consumer acceptance (n = 93). A salt reduction of 30% was achieved while maintaining saltiness perception and consumer acceptance using model salts, while direct removal of salt without perceptual impact was only achievable by 15%. To investigate key drivers of liking, consumers were segmented based on product liking and mouth behaviour. Results suggested that whilst salt content was the primary driver, specific texture profiles were polarising. However, mouth behaviour had minimal influence on preference. These results validate previously described physicochemical design rules for developing novel salt particles for salt reduction and inform ingredient design for the food and flavour industries.

Prediction of coffee aroma from single roasted coffee beans by hyperspectral imaging.

Coffee aroma is critical for consumer liking and enables price differentiation of coffee. This study applied hyperspectral imaging (1000-2500 nm) to predict volatile compounds in single roasted coffee beans, as measured by Solid Phase Micro Extraction-Gas Chromatography-Mass Spectrometry and Gas Chromatography-Olfactometry. Partial least square (PLS) regression models were built for individual volatile compounds and chemical classes. Selected key aroma compounds were predicted well enough to allow rapid screening (R2 greater than 0.7, Ratio to Performance Deviation (RPD) greater than 1.5), and improved predictions were achieved for classes of compounds - e.g. aldehydes and pyrazines (R2 âˆ¼ 0.8, RPD âˆ¼ 1.9). To demonstrate the approach, beans were successfully segregated by HSI into prototype batches with different levels of pyrazines (smoky) or aldehydes (sweet). This is industrially relevant as it will provide new rapid tools for quality evaluation, opportunities to understand and minimise heterogeneity during production and roasting and ultimately provide the tools to define and achieve new coffee flavour profiles.

The role of inorganic-phosphate, potassium and magnesium in yeast-flavour formation.

Inorganic-phosphate, potassium, and magnesium are key-minerals required for yeast growth, metabolism, and survival, the present work investigated its impact in yeast-flavour formation using a multi-factor experimental design, which was used to generate a range of phosphorous-potassium-magnesium resulting in a 28-point D-optimal design. Samples were evaluated using HPLC (ethanol), GC-MS (aroma), and CountStar (total yeast cell). Results revealed that yeast requires a minimal amount of inorganic-phosphate, potassium, and magnesium (250, 500, and 70 mg/L, respectively) to support yeast-growth and ethanol/flavour formation. Inorganic-phosphate was important for fatty acid esters formation/short chain fatty acid (SCFA) reduction. Potassium was important in the formation of acetate esters/higher alcohols. Magnesium was the most important inorganic element for ester formation/SCFA reduction; furthermore, ethanol production is magnesium-dependent. In conclusion, inorganic phosphate, potassium and magnesium play an important role in yeast-growth, esters and higher alcohols formation; and SCFA reduction. Ethanol formation is Mg-dependent.

Impact of cooking on the sensory perception and volatile compounds of Takifugu rubripes.

Takifugu rubripes is well-known for its unique flavour but can also develop a putrid off-note. To eliminate off-note and promote desirable flavour, four cooking processes (boiling, steaming, microwave-heating and roasting) were explored to determine their effects on cooked T. rubripes. The temperature and water dynamics, physico-chemical properties were analysed and correlated with sensory qualities. The changes of centre temperature dynamics during cooking decreased the water mobility and led to varied sensory properties. Six out of ten orthonasal aroma attributes and four out of five mouthfeel attributes were significantly different among samples (p < 0.05). Based on partial least squares regression analysis, orthonasal aroma attributes "roasted" and "earthy/putrid fish" highly correlated with the volatile compounds generated from Maillard reaction and lipid oxidation, respectively; meanwhile mouthfeel attributes of chewy/fibre and tender/juicy were highly associated with water loss and moisture, respectively. This study provides insights for optimising cooking conditions to create desirable fish flavour.