RESUMO
Repeated compression and dilation of a protein film adsorbed to an interface lead to aggregation and entry of film fragments into the bulk. This is a major mechanism for protein aggregate formation in drug products upon mechanical stress, such as shaking or pumping. To gain a better understanding of these events, we developed a molecular dynamics (MD) setup, which would, in a later stage, allow for in silico formulation optimization. In contrast to previous approaches, the molecules of our model protein human growth hormone displayed realistic shapes, surfaces, and interactions with each other and the interface. This enabled quantitative assessment of protein cluster formation. Simulation outcomes aligned with experimental data on subvisible particles and turbidity, thereby validating the model. Computational and experimental results indicated that compression speed does not affect the aggregation behavior of preformed protein films but rather their regeneration. Protein clusters that formed during compression disassembled upon relaxation, suggesting that the particles originate from a partly compressed state. Desorption studies via steered MD revealed that proteins from compressed systems are more likely to detach as clusters, implying that compression effects at the interface translate into aggregates present in the bulk solution. With the possibility of studying the impact of different variables upon compression and dilation at the interface on a molecular level, our model contributes to the understanding of the mechanisms of protein aggregation at moving interfaces. It also enables further studies to change formulation parameters, interfaces, or proteins.
Assuntos
Anticorpos Monoclonais , Agregados Proteicos , Humanos , Simulação de Dinâmica Molecular , Estresse Mecânico , PressãoRESUMO
Rational design is pivotal in the modern development of nucleic acid nanocarrier systems. With the rising prominence of polymeric materials as alternatives to lipid-based carriers, understanding their structure-function relationships becomes paramount. Here, we introduce a newly developed coarse-grained model of polyethylenimine (PEI) based on the Martini 3 force field. This model facilitates molecular dynamics simulations of true-sized PEI molecules, exemplified by molecules with molecular weights of 1.3, 5, 10, and 25 kDa, with degrees of branching between 50.0 and 61.5%. We employed this model to investigate the thermodynamics of small interfering RNA (siRNA) complexation with PEI. Our simulations underscore the pivotal role of electrostatic interactions in the complexation process. Thermodynamic analyses revealed a stronger binding affinity with increased protonation, notably in acidic (endosomal) pH, compared to neutral conditions. Furthermore, the molecular weight of PEI was found to be a critical determinant of binding dynamics: smaller PEI molecules closely enveloped the siRNA, whereas larger ones extended outward, facilitating the formation of complexes with multiple RNA molecules. Experimental validations, encompassing isothermal titration calorimetry and single-molecule fluorescence spectroscopy, aligned well with our computational predictions. Our findings not only validate the fidelity of our PEI model but also accentuate the importance of in silico data in the rational design of polymeric drug carriers. The synergy between computational predictions and experimental validations, as showcased here, signals a refined and precise approach to drug carrier design.
Assuntos
Simulação de Dinâmica Molecular , Polietilenoimina , RNA Interferente Pequeno , Termodinâmica , Polietilenoimina/química , RNA Interferente Pequeno/química , Concentração de Íons de Hidrogênio , Peso Molecular , Eletricidade EstáticaRESUMO
Therapeutic proteins can be challenging to develop due to their complexity and the requirement of an acceptable formulation to ensure patient safety and efficacy. To date, there is no universal formulation development strategy that can identify optimal formulation conditions for all types of proteins in a fast and reliable manner. In this work, high-throughput characterization, employing a toolbox of five techniques, was performed on 14 structurally different proteins formulated in 6 different buffer conditions and in the presence of 4 different excipients. Multivariate data analysis and chemometrics were used to analyze the data in an unbiased way. First, observed changes in stability were primarily determined by the individual protein. Second, pH and ionic strength are the two most important factors determining the physical stability of proteins, where there exists a significant statistical interaction between protein and pH/ionic strength. Additionally, we developed prediction methods by partial least-squares regression. Colloidal stability indicators are important for prediction of real-time stability, while conformational stability indicators are important for prediction of stability under accelerated stress conditions at 40 °C. In order to predict real-time storage stability, protein-protein repulsion and the initial monomer fraction are the most important properties to monitor.
Assuntos
Anticorpos Monoclonais , Quimiometria , Humanos , Estabilidade Proteica , Anticorpos Monoclonais/química , Desdobramento de Proteína , Conformação Proteica , Estabilidade de MedicamentosRESUMO
Using light scattering (LS), small-angle X-ray scattering (SAXS), and coarse-grained Monte Carlo (MC) simulations, we studied the self-interactions of two monoclonal antibodies (mAbs), PPI03 and PPI13. With LS measurements, we obtained the osmotic second virial coefficient, B22, and the molecular weight, Mw, of the two mAbs, while with SAXS measurements, we studied the mAbs' self-interaction behavior in the high protein concentration regime up to 125 g/L. Through SAXS-derived coarse-grained representations of the mAbs, we performed MC simulations with either a one-protein or a two-protein model to predict B22. By comparing simulation and experimental results, we validated our models and obtained insights into the mAbs' self-interaction properties, highlighting the role of both ion binding and charged patches on the mAb surfaces. Our models provide useful information about mAbs' self-interaction properties and can assist the screening of conditions driving to colloidal stability.
Assuntos
Anticorpos Monoclonais , Anticorpos Monoclonais/química , Método de Monte Carlo , Espalhamento a Baixo Ângulo , Difração de Raios X , Raios XRESUMO
Strongly attractive self-interaction of therapeutic protein candidates can impose challenges for manufacturing, filling, stability, and administration due to elevated viscosity or aggregation propensity. Suitable formulations can mitigate these issues to a certain extent. Understanding the self-interaction mechanism on a molecular basis and rational protein engineering provides a more fundamental approach, and it can save costs and efforts as well as alleviate risks at later stages of development. In this study, we used computational methods for the identification of aggregation-prone regions in a mAb and generated mutants based on these findings. We applied hydrogen-deuterium exchange mass spectrometry to identify distinct self-interaction hot spots. Ultimately, we generated mAb variants based on a combination of both approaches and identified mutants with low attractive self-interaction propensity, minimal off-target binding, and even improved target binding. Our data show that the introduction of arginine in spatial proximity to hydrophobic patches is highly beneficial on all these levels. For our mAb, variants that contain more than one aspartate residue flanking to the hydrophobic HCDR3 show decreased attractive self-interaction at unaffected off-target and target binding. The combined engineering strategy described here underlines the high potential of understanding self-interaction in the early stages of development to predict and reduce the risk of failure in subsequent development.
Assuntos
Anticorpos Monoclonais/genética , Mutação/genética , Linhagem Celular Tumoral , Medição da Troca de Deutério/métodos , Humanos , Interações Hidrofóbicas e Hidrofílicas , Espectrometria de Massas/métodos , Engenharia de Proteínas/métodos , ViscosidadeRESUMO
PURPOSE: Scale-down devices (SDD) are designed to simulate large-scale thawing of protein drug substance, but require only a fraction of the material. To evaluate the performance of a new SDD that aims to predict thawing in large-scale 2 L bottles, we characterised 3D temperature profiles and changes in concentration and density in comparison to 125 mL and 2 L bottles. Differences in diffusion between a monoclonal antibody (mAb) and histidine buffer after thawing were examined. METHODS: Temperature profiles at six distinct positions were recorded with type T thermocouples. Size-exclusion chromatography allowed quantification of mAb and histidine. Polysorbate 80 was quantified using a fluorescent dye assay. In addition, the solution's density at different locations in bottles and the SDD was identified. RESULTS: The temperature profiles in the SDD and the large-scale 2 L bottle during thawing were similar. Significant concentration gradients were detected in the 2 L bottle leading to marked density gradients. The SDD slightly overestimated the dilution in the top region and the maximum concentrations at the bottom. Fast diffusion resulted in rapid equilibration of histidine. CONCLUSION: The innovative SDD allows a realistic characterisation and helps to understand thawing processes of mAb solutions in large-scale 2 L bottles. Only a fraction of material is needed to gain insights into the thawing behaviour that is associated with several possible detrimental limitations.
Assuntos
Anticorpos Monoclonais/química , Excipientes/química , Soluções Tampão , Química Farmacêutica , Armazenamento de Medicamentos , Excipientes/análise , Congelamento , Polissorbatos/análise , Polissorbatos/químicaRESUMO
Therapeutic peptides and proteins show enormous potential in the pharmaceutical market, but high costs in discovery and development are limiting factors so far. Single or multiple point mutations are commonly introduced in protein drugs to increase their binding affinity or selectivity. They can also induce adverse properties, which might be overlooked in a functional screen, such as a decreased colloidal or thermal stability, leading to problems in later stages of the development. In this study, we address the effect of point mutations on the stability of the 4.4 kDa antimicrobial peptide plectasin, as a case study. We combined a systematic high-throughput biophysical screen of the peptide thermal and colloidal stability using dynamic light scattering and differential scanning calorimetry with structure-based methods including small-angle X-ray scattering, analytical ultracentrifugation, and nuclear magnetic resonance spectroscopy. Additionally, we applied molecular dynamics simulations to link obtained protein stability parameters to the protein's molecular structure. Despite their predicted structural similarities, all four plectasin variants showed substantially different behavior in solution. We observed an increasing propensity of plectasin to aggregate at a higher pH, and the introduced mutations influenced the type of aggregation. Our strategy for systematically assessing the stability and aggregation of protein drugs is generally applicable and is of particular relevance, given the increasing number of protein drugs in development.
Assuntos
Mutação Puntual/genética , Proteínas Citotóxicas Formadoras de Poros/química , Proteínas Citotóxicas Formadoras de Poros/genética , Biofísica/métodos , Varredura Diferencial de Calorimetria/métodos , Difusão Dinâmica da Luz/métodos , Concentração de Íons de Hidrogênio , Peptídeos/química , Peptídeos/genética , Agregados Proteicos/genética , Estabilidade Proteica/efeitos dos fármacosRESUMO
Therapeutic protein candidates should exhibit favorable properties that render them suitable to become drugs. Nevertheless, there are no well-established guidelines for the efficient selection of proteinaceous molecules with desired features during early stage development. Such guidelines can emerge only from a large body of published research that employs orthogonal techniques to characterize therapeutic proteins in different formulations. In this work, we share a study on a diverse group of proteins, including their primary sequences, purity data, and computational and biophysical characterization at different pH and ionic strength. We report weak linear correlations between many of the biophysical parameters. We suggest that a stability comparison of diverse therapeutic protein candidates should be based on a computational and biophysical characterization in multiple formulation conditions, as the latter can largely determine whether a protein is above or below a certain stability threshold. We use the presented data set to calculate several stability risk scores obtained with an increasing level of analytical effort and show how they correlate with protein aggregation during storage. Our work highlights the importance of developing combined risk scores that can be used for early stage developability assessment. We suggest that such scores can have high prediction accuracy only when they are based on protein stability characterization in different solution conditions.
Assuntos
Anticorpos Monoclonais/química , Descoberta de Drogas/métodos , Imunoglobulina G/química , Interferon alfa-2/química , Desdobramento de Proteína , Albumina Sérica Humana/química , Transferrina/química , Sequência de Aminoácidos , Armazenamento de Medicamentos , Humanos , Concentração de Íons de Hidrogênio , Concentração Osmolar , Agregados Proteicos , Estabilidade Proteica , Projetos de Pesquisa , SolubilidadeRESUMO
PURPOSE: To speed up the drug development process in the biopharmaceutical industry, high throughput methods are indispensable for assessing drug candidates and potential lead formulations, in particular during late stages of discovery and early phases of development. This study aimed to establish a bio-layer-interferometry based high throughput assay for assessing formulation dependent mAb self-interaction (SI-BLI) and to compare the results with kD values obtained by dynamic light scattering (DLS). METHODS: Self-interaction of proprietary and commercially available mAbs was analyzed by SI-BLI and dynamic light scattering (DLS). RESULTS: We found significant correlations of the SI-BLI results and kD-values obtained by DLS for both, different mAbs in one platform formulation and for mAbs formulated in several buffer compositions. In total, we assessed self-interaction propensity of different mAbs in 58 formulations and found significant Pearson correlation (p < 0.05) between kD and results of SI-BLI. CONCLUSIONS: The SI-BLI results correlate with kD and enable fast ranking of both different drug candidates and potential lead formulations. Thus, SI-BLI might decrease the risk to lose potent mAb candidates during transition from discovery to development, and help to accelerate the development of high concentration liquid formulations.
Assuntos
Adalimumab/química , Omalizumab/química , Composição de Medicamentos , Ensaios de Triagem em Larga Escala , Humanos , Interferometria/métodos , Cinética , Ligação Proteica , Conformação Proteica , Multimerização ProteicaRESUMO
PURPOSE: Small-scale models that simulate large-scale freezing of bulk drug substance of biopharmaceuticals are highly needed to define freezing and formulation parameters based on process understanding. We evaluated a novel scale-down device (SDD), which is based on a specially designed insulation cover, with respect to changes in concentration after freezing, referred to as cryoconcentration, and 3D temperature profiles. Furthermore, the effect of the initial monoclonal antibody (mAb) concentration on cryoconcentration was addressed. METHODS: 2 L and 125 mL bottles were utilized. Temperatures were mapped using type T thermocouples. Frozen blocks were cut and mAb and histidine concentrations were analysed by HPLC. In addition, concentration- and temperature-dependent viscosities were measured. RESULTS: 3D freezing profiles in the SDD were comparable to large-scale bottles. The SDD accurately predicted cryoconcentration of both mAb and histidine of large-scale freezing. Concentric changes in concentration were evident as well as an unforeseen diluted core at the last point to freeze. At low initial mAb concentration cryoconcentration was substantial, while high initial mAb concentration suppressed cryoconcentration almost completely. CONCLUSION: The novel SDD gives detailed insights into large-scale freezing of mAb solutions using only a fraction of the simulated volume. It is a promising material- and cost-saving tool to understand large-scale freezing processes.
Assuntos
Anticorpos Monoclonais/química , Desenho de Equipamento/instrumentação , Proteínas/química , Termografia/instrumentação , Anticorpos Monoclonais/análise , Congelamento , Histidina/análise , Histidina/química , Cinética , Proteínas/análise , Soluções , TemperaturaRESUMO
PURPOSE: The physical state of excipients in freeze-dried formulations directly affects the stability of the active pharmaceutical ingredient (API). Crystallization of trehalose and mannitol in frozen solutions has been shown to be a function of composition. However, to date a detailed study of the effect of concentrations of the API and other excipients on the crystallinity of mannitol and trehalose in frozen solutions has not been reported. METHODS: The crystallinity of mannitol and trehalose in frozen solutions was characterized by Differential Scanning Calorimetry, X-ray diffractometry, and FTIR spectroscopy. The secondary structure of BSA was probed by FTIR, and Circular Dichroism spectroscopy in frozen and thawed solutions, respectively. RESULTS: Trehalose crystallization was accompanied by unfolding of BSA. BSA delayed and reduced the extent of mannitol and trehalose crystallization. Similar effects were observed upon adding D2O (≥5% w/w) and low concentrations of polysorbate 20 (≤0.2% w/w) with retention of BSA in its native conformation. At high BSA to trehalose mass ratio, the protein could stabilize itself in the frozen state, but unfolded upon thawing. CONCLUSIONS: The API and other excipients, in a concentration-dependent manner, influenced the physical state of the freeze concentrate as well as the stability of the API.
Assuntos
Excipientes/química , Proteínas/química , Varredura Diferencial de Calorimetria/métodos , Química Farmacêutica/métodos , Cristalização/métodos , Liofilização/métodos , Congelamento , Manitol/química , Estabilidade Proteica , Espectroscopia de Infravermelho com Transformada de Fourier/métodos , Trealose/química , Difração de Raios X/métodosRESUMO
Reconstructed skin models are suitable test systems for toxicity testing and for basic investigations on (patho-)physiological aspects of human skin. Reconstructed human skin, however, has clear limitations such as the lack of immune cells and a significantly weaker skin barrier function compared to native human skin. Potential reasons for the latter might be the lack of mechanical forces during skin model cultivation which is performed classically in static well-plate setups. Mechanical forces and shear stress have a major impact on tissue formation and, hence, tissue engineering. In the present work, a perfusion platform was developed allowing dynamic cultivation of in vitro skin models. The platform was designed to cultivate reconstructed skin at the air-liquid interface with a laminar and continuous medium flow below the dermis equivalent. Histological investigations confirmed the formation of a significantly thicker stratum corneum compared to the control cultivated under static conditions. Moreover, the skin differentiation markers involucrin and filaggrin as well as the tight junction proteins claudin 1 and occludin showed increased expression in the dynamically cultured skin models. Unexpectedly, despite improved differentiation, the skin barrier function of the dynamically cultivated skin models was not enhanced compared with the skin models cultivated under static conditions.
Assuntos
Modelos Biológicos , Absorção Cutânea , Pele/metabolismo , Animais , Bovinos , Células Cultivadas , Claudina-1/genética , Claudina-1/metabolismo , Fibroblastos/metabolismo , Proteínas Filagrinas , Humanos , Técnicas In Vitro , Proteínas de Filamentos Intermediários/genética , Proteínas de Filamentos Intermediários/metabolismo , Queratinócitos/metabolismo , Ocludina/genética , Ocludina/metabolismo , Perfusão , Permeabilidade , Precursores de Proteínas/genética , Precursores de Proteínas/metabolismoRESUMO
Hyaluronic acid (HA) hydrogels are interesting delivery systems for topical applications. Besides moisturizing the skin and improving wound healing, HA facilitates topical drug absorption and is highly compatible with labile biomacromolecules. Hence, in this study we investigated the influence of HA hydrogels with different molecular weights (5 kDa, 100 kDa, 1 MDa) on the skin absorption of the model protein bovine serum albumin (BSA) using fluorescence lifetime imaging microscopy (FLIM). To elucidate the interactions of HA with the stratum corneum and the skin absorption of HA itself, we combined FLIM and Fourier-transform infrared (FTIR) spectroscopy. Our results revealed distinct formulation and skin-dependent effects. In barrier deficient (tape-stripped) skin, BSA alone penetrated into dermal layers. When BSA and HA were applied together, however, penetration was restricted to the epidermis. In normal skin, penetration enhancement of BSA into the epidermis was observed when applying low molecular weight HA (5 kDa). Fluorescence resonance energy transfer analysis indicated close interactions between HA and BSA under these conditions. FTIR spectroscopic analysis of HA interactions with stratum corneum constituents showed an α-helix to ß-sheet interconversion of keratin in the stratum corneum, increased skin hydration, and intense interactions between 100 kDa HA and the skin lipids resulting in a more disordered arrangement of the latter. In conclusion, HA hydrogels restricted the delivery of biomacromolecules to the stratum corneum and viable epidermis in barrier deficient skin, and therefore seem to be potential topical drug vehicles. In contrast, HA acted as an enhancer for delivery in normal skin, probably mediated by a combination of cotransport, increased skin hydration, and modifications of the stratum corneum properties.
Assuntos
Ácido Hialurônico/química , Soroalbumina Bovina/química , Pele/metabolismo , Administração Cutânea , Animais , Bovinos , Técnicas In Vitro , Soroalbumina Bovina/metabolismo , Absorção Cutânea , Espectroscopia de Infravermelho com Transformada de Fourier , SuínosRESUMO
PURPOSE: In this study an innovative, highly sensitive work-flow is presented that allows the analysis of a possible influence of individual glyco-variants on pharmacokinetics already during pre-clinical development. Possible effects on the pharmacokinetics caused by glyco-variants have been subject of several studies with in part contradictory results which can be related to differences in the set-up. METHODS: Using 96-well plate based affinity purification an IgG1 antibody was isolated from preclinical samples and glycans were analyzed individually by nanoLCMS. Prerequisite was a reference standard based on stable heavy isotope labeled glycans. The high sensitivity and low sample consumption enabled the integration into the preclinical development program. RESULTS: The data of an IgG1 biopharmaceutical from a preclinical rabbit study showed that some N-glycoforms have a different PK profile compared with the average of all molecule variants as determined by ELISA. IgG1 high mannose glycoforms M5 and M6 were removed from circulation at a higher rate. CONCLUSION: The results of the preclinical study demonstrated the applicability of the developed innovative workflow. The PK profile of glyco-variants could be determined individually. It was concluded that M6 was converted by mannosidases in circulation to M5 which in turn was selectively cleared by mannose receptor binding which is in-line with previously published results. Therefore the developed technology delivers reliable results and can be applied for PK profiling of other mAbs and other types of biopharmaceuticals.
Assuntos
Anticorpos Monoclonais/sangue , Biofarmácia/métodos , Imunoglobulina G/sangue , Polissacarídeos/química , Fluxo de Trabalho , Animais , Anticorpos Monoclonais/química , Afinidade de Anticorpos , Isótopos de Carbono , Cromatografia Líquida/métodos , Avaliação Pré-Clínica de Medicamentos , Fragmentos Fc das Imunoglobulinas/química , Imunoglobulina G/química , Injeções Subcutâneas , Limite de Detecção , Espectrometria de Massas/métodos , Coelhos , Padrões de ReferênciaRESUMO
Genetic skin diseases caused by mutations resulting in diminished protein synthesis could benefit from local substitution of the missing protein. Proteins, however, are excluded from topical applications due to their physicochemical properties. We prepared protein-loaded thermoresponsive poly(N-isopropylacrylamide)-polyglycerol-based nanogels exhibiting a thermal trigger point at 35°C, which is favorable for cutaneous applications due to the native thermal gradient of human skin. At≥35°C, the particle size (~200nm) was instantly reduced by 20% and 93% of the protein was released; no alterations of protein structure or activity were detected. Skin penetration experiments demonstrated efficient intraepidermal protein delivery particularly in barrier deficient skin, penetration of the nanogels themselves was not detected. The proof of concept was provided by transglutaminase 1-loaded nanogels which efficiently delivered the protein into transglutaminase 1-deficient skin models resulting in a restoration of skin barrier function. In conclusion, thermoresponsive nanogels are promising topical delivery systems for biomacromolecules. FROM THE CLINICAL EDITOR: Many skin disorders are characterized by an absence of a specific protein due to underlying gene mutation. In this article, the authors described the use of a thermoresponsive PNIPAM-dPG nanogel for cutaneous protein delivery in a gene knock-down model of human skin. The results may have implication for nano-based local delivery of therapeutic agents in skin.
Assuntos
Resinas Acrílicas/química , Preparações de Ação Retardada/química , Géis/química , Glicerol/química , Polímeros/química , Pele/metabolismo , Transglutaminases/administração & dosagem , Administração Cutânea , Animais , Asparaginase/administração & dosagem , Asparaginase/farmacocinética , Bovinos , Preparações de Ação Retardada/metabolismo , Géis/metabolismo , Técnicas de Silenciamento de Genes , Glicerol/metabolismo , Humanos , Polímeros/metabolismo , Soroalbumina Bovina/administração & dosagem , Soroalbumina Bovina/farmacocinética , Pele/ultraestrutura , Absorção Cutânea , Suínos , Temperatura , Testosterona/administração & dosagem , Testosterona/farmacocinética , Transglutaminases/genética , Transglutaminases/farmacocinéticaRESUMO
Silicone oil (SO) migration into the drug product of combination products for biopharmaceuticals during storage is a common challenge. As the inner barrel surface is depleted of SO the extrusion forces can increase compromising the container functionality. In this context we investigated the impact of different formulations on the increase in gliding forces in a spray-on siliconized pre-filled syringe upon storage at 2-8⯰C, 25⯰C and 40⯰C for up to 6â¯months. We tested the formulation factors such as surfactant type, pH, and ionic strength in the presence of one monoclonal antibody (mAb) as well as compared three mAbs in one formulation. After 1â¯month at 40⯰C, the extrusion forces were significantly increased due to SO detachment dependent on the fill medium. The storage at 40⯰C enhanced the SO migration process but it could also be observed at lower storage temperatures. Regarding the formulation factors the tendency for SO migration was predominantly dependent on the presence and type of surfactant. Interestingly, when varying the mAb molecules, one of the proteins showed a rather stabilizing effect on the SO layer resulting into higher container stability. In contrast to the formulation factors, those different stability outcomes could not be explained by interfacial tension (IFT) measurements at the SO interface. Further characterization of the mAb molecules regarding interfacial rheology and conformational stability were not adequately able to explain the observed difference. Solely a hydrophobicity ranking of the molecules correlated to the stability outcome. Further investigations are needed to clarify the role of the protein in the SO detachment process and to understand the cause for the stabilization. However, the study clearly demonstrated that the protein itself plays a critical role in the SO detachment process and underlined the importance to include verum for container stability.
RESUMO
Terahertz time-domain spectroscopy and differential scanning calorimetry were used to study the role of the dynamics of biomolecules decoupled from solvent effects. Lyophilized sucrose exhibited steadily increasing absorption with temperature as anharmonic excitations commenced as the system emerged from a deep minimum of the potential energy landscape where harmonic vibrations dominate. The polypeptide bacitracin and two globular proteins, lysozyme and human serum albumin, showed a more complex temperature dependence. Further analysis focused on the spectral signature below and above the boson peak. We found evidence of the onset of anharmonic motions that are characteristic for partial unfolding and molecular jamming in the dry biomolecules. The activation of modes of the protein molecules at temperatures comparable to the protein dynamical transition temperature was observed in the absence of hydration. No evidence of Fröhlich coherence, postulated to facilitate biological function, was found in our experiments.
Assuntos
Proteínas , Água , Humanos , Proteínas/química , Solventes , Temperatura , Água/químicaRESUMO
During biopharmaceutical development, particle monitoring and characterization are crucial. Notably, particles can be impurities considered as critical quality attribute, or active pharmaceutical ingredient (e.g., viral vectors) or drug delivery system (e.g., lipid nanoparticles) itself. Three-dimensional homodyne light detection (3D-HLD) is a novel technique that can characterize particles in the â¼0.2 µm to 2.0 µm size range. We evaluated 3D-HLD for the analysis of high concentration protein formulations (up to 200 mg/mL), where formulation refractive index and background noise became limiting factors with increasing protein concentration. Sample viscosity however did not impact 3D-HLD results, in contrast to comparative analyses with NTA and MRPS. We also applied 3D-HLD in high-throughput screenings at high protein concentration or of lipid nanoparticle and viral vector formulations, where impurities were analyzed in the presence of a small (<0.2 µm) particulate active pharmaceutical ingredient. 3D-HLD turned out to be in good agreement with or a good complement to other state-of-the-art particle characterization techniques, including BMI, MRPS, and DLS. The main application of 3D-HLD is high-throughput particle analysis at low sample volume. Follow-up investigation of the optimized particle sizing approach and of detection settings could further improve the understanding of the method and potentially increase ease of operation.
Assuntos
Produtos Biológicos , Nanopartículas , Princípios Ativos , Proteínas/análise , Nanopartículas/análise , Ensaios de Triagem em Larga Escala , Tamanho da PartículaRESUMO
PURPOSE: A new dry powder inhalation technology creates inhalable particles from a coherent lyophilized bulk at the time of inhalation. The aim of this study was to evaluate several approaches to improve the fine particle fraction (FPF) and to understand underlying mechanisms. METHODS: Lysozyme was chosen as model drug. Phenylalanine and valine were added, and the freezing process was varied. Lyophilisate characteristics as well as aerosolization behavior was analyzed. RESULTS: The addition of the crystalline amino acids rendered a dose independent three-fold increase of the FPF. This is possibly due to enhanced fracture properties of the lyophilisates upon impact of the air stream and reduced particle agglomeration/cohesion caused by a rougher surface. This positive effect was well preserved over 3 months of storage. The structure of the lyophilisate was influenced by the freezing process which in turn affected the aerosolization behavior. Liquid nitrogen and vacuum-induced freezing performed best, doubling the FPF. The special cake morphology with elongated channels enabled easy disintegration. The resulting large porous particles comprise a low density being advantageous for a high FPF. CONCLUSION: The variation of the lyophilization process and formulation utilizing excipients enabled an optimization of the FPF of the novel lyophilisate based DPI system.
Assuntos
Química Farmacêutica/métodos , Inaladores de Pó Seco/métodos , Muramidase/química , Estabilidade de Medicamentos , Armazenamento de Medicamentos , Excipientes/síntese química , Liofilização/métodos , Tamanho da Partícula , Fenilalanina/química , Valina/químicaRESUMO
N-Glycosylation is a common post-translational modification of monoclonal antibodies with a potential effect on the efficacy and safety of the drugs; detailed knowledge about this glycosylation is therefore crucial. We have developed a reversed-phase liquid chromatographic-mass spectrometric method, with different fluorescent labels, for analysis of N-glycosylation, and compared the sensitivity and selectivity of the methods. Our work demonstrates that anthranilic acid as fluorescent label in combination with reversed-phase liquid chromatography-mass spectrometry is an advantageous method for identification and quantification of neutral and acidic N-glycans. Our results show that mass spectrometry-based quantification correlates with quantification by fluorescence. Chromatographic discrimination between several structural glycan isomers was achieved. The sharp peaks of the eluting anthranilic acid-labeled N-glycans enabled on-line mass spectrometric analysis of even low-abundance glycan species. The method is broadly applicable to N-glycan analysis and is an orthogonal analytical method to the widely established hydrophilic-interaction liquid chromatography of 2-aminobenzamide-labeled N-glycans for characterization of N-glycans derived from biopharmaceuticals.