Evaluation of the degradation of the graphene-polypropylene composites of masks in harsh working conditions.

The recent COVID-19 outbreak has led health authorities to recommend at least the use of surgical masks, most preferably respirators (FFP2 or KN95), to prevent the spread of the virus. Non-woven fabrics have been chosen as the best option to manufacture the face masks, due to their filtration efficiency, low cost, and versatility. Modifying the mask filters with graphene has been of great interest due to its potential use as antibacterial and virucidal properties. Indeed, some companies have commercialized face masks in which graphene is coated and/or embedded. However, the Canadian sanitary authorities advised against using the Shandong Shengquan New Materials Co. graphene masks because of the possibility of pulmonary damage produced by graphene inhalation. Thus, we have analyzed the stability of the graphene filter of these masks and compared it with two other commercially available graphene mask filters, evaluating the morphological and spectroscopical change of the fibers, as well as the particles released during the endurance tests. Our work introduces the necessary tools and methodology to evaluate the potential degradation of face masks under extreme working conditions. These methods complement the present standard tests ensuring the security of the new filters based on composites or nanomaterials.

Built-in mechanical stress in viral shells.

Mechanical properties of biological molecular aggregates are essential to their function. A remarkable example are double-stranded DNA viruses such as the φ29 bacteriophage, that not only has to withstand pressures of tens of atmospheres exerted by the confined DNA, but also uses this stored elastic energy during DNA translocation into the host. Here we show that empty prolated φ29 bacteriophage proheads exhibit an intriguing anisotropic stiffness which behaves counterintuitively different from standard continuum elasticity predictions. By using atomic force microscopy, we find that the φ29 shells are approximately two-times stiffer along the short than along the long axis. This result can be attributed to the existence of a residual stress, a hypothesis that we confirm by coarse-grained simulations. This built-in stress of the virus prohead could be a strategy to provide extra mechanical strength to withstand the DNA compaction during and after packing and a variety of extracellular conditions, such as osmotic shocks or dehydration.

Noninvasive protein structural flexibility mapping by bimodal dynamic force microscopy.

Mapping of the protein structural flexibility with sub-2-nm spatial resolution in liquid is achieved by combining bimodal excitation and frequency modulation force microscopy. The excitation of two cantilever eigenmodes in dynamic force microscopy enables the separation between topography and flexibility mapping. We have measured variations of the elastic modulus in a single antibody pentamer from 8 to 18 MPa when the probe is moved from the end of the protein arm to the central protrusion. Bimodal dynamic force microscopy enables us to perform the measurements under very small repulsive loads (30-40 pN).

Properties of metallic nanowires: from conductance quantization to localization.

Material structures of reduced dimensions exhibit electrical and mechanical properties different from those in the bulk. Measurements of room-temperature electronic transport in pulled metallic nanowires are presented, demonstrating that the conductance characteristics depend on the length, lateral dimensions, state and degree of disorder, and elongation mechanism of the wire. Conductance during the elongation of short wires (length l approximately 50 angstroms) exhibits periodic quantization steps with characteristic dips, correlating with the order-disorder states of layers of atoms in the wire predicted by molecular dynamics simulations. The resistance R of wires as long as l approximately 400 angstroms exhibits localization characteristics with In R(l) approximately l(2).

Variable-field magnetic force microscopy.

A new variable external field magnetic force microscope is introduced here. The most outstanding feature of the system is its capability to perform stable images under a variable external magnetic field that can be applied both in in-plane and out-of-plane directions. The performances of the microscope are illustrated for four different suitable selected samples: highly oriented pyrolytic graphite, longitudinal magnetic storage media, FePt thin films with in-plane anisotropy and Ni nanowires with axial easy axis embedded on a ceramic matrix. The use of this variable-field magnetic force microscope as a magnetic writing-reading technique is also shown in this contribution.

Effect of gold adsorption on the conductive properties of cyclo-octasulfur microcrystals.

The formation of gold crystallites on the surface of S8 promotes diffusion of electrons and determines the conductive properties of the shell-core nanosystems. Conducting probe atomic microscopy and four-probe resistance measurements confirmed that Au/S8 shell-core systems exhibit electrical conductivity on the micro- as well as on the nanoscale in contrast to non-covered S8 crystals, which are insulating. The conductivity of Au/S8 systems on the microscale was measured to be 10+/-1 S cm(-1). In XPS measurements, a single peak at 163.6 eV was observed for bulk S8 whereas an additional peak corresponding to a binding energy of 161.4 eV appeared for S8 adsorbed on a Au substrate. This is interpreted to mean that a chemical reaction has taken place. A process which results in adsorption of uniform gold nanolayers on needle shaped or fibrous S8 crystallites is under investigation.

WSXM: a software for scanning probe microscopy and a tool for nanotechnology.

In this work we briefly describe the most relevant features of WSXM, a freeware scanning probe microscopy software based on MS-Windows. The article is structured in three different sections: The introduction is a perspective on the importance of software on scanning probe microscopy. The second section is devoted to describe the general structure of the application; in this section the capabilities of WSXM to read third party files are stressed. Finally, a detailed discussion of some relevant procedures of the software is carried out.

Macroscopic water deposits on polycrystalline gold measured by scanning force microscopy.

Data of water adsorption on polycrystalline gold show the formation of a multilayer film of several nanometers with the increase of relative humidity. We have measured this adsorption process by scanning force microscopy in both dynamic and jumping modes. We find interesting differences in the adsorption of water on the terraces and at grain boundaries. Measurements of adhesion force are also reported.

Interaction forces and conduction properties between multi wall carbon nanotube tips and Au(111).

We have studied the interaction forces and electrical conduction properties arising between multiwall carbon nanotube tips and the Au(111) surface in air, by means of amplitude modulation scanning force microscopy, also called intermittent contact. We have centered our work on tips with metallic electronic structure and for the specific parameters used we have found a preliminary interaction range where there is no contact between tip and surface. Stable imaging in this non-contact range is possible with multiwall carbon nanotube tips. These tips have also been used to obtain simultaneous topographic and current maps of the surface. They show excellent properties as tips due to their high aspect ratio and durability, as a result of their elastic and non-reactive properties. Correspondingly, multiwall carbon nanotube tips allow high resolution local analysis of electrical conductivity on a nanometer scale.

Atomic force microscopy contact, tapping, and jumping modes for imaging biological samples in liquids.

The capabilities of the atomic force microscope for imaging biomolecules under physiological conditions has been systematically investigated. Contact, dynamic, and jumping modes have been applied to four different biological systems: DNA, purple membrane, Alzheimer paired helical filaments, and the bacteriophage phi29. These samples have been selected to cover a wide variety of biological systems in terms of sizes and substrate contact area, which make them very appropriate for the type of comparative studies carried out in the present work. Although dynamic mode atomic force microscopy is clearly the best choice for imaging soft samples in air, in liquids there is not a leading technique. In liquids, the most appropriate imaging mode depends on the sample characteristics and preparation methods. Contact or dynamic modes are the best choices for imaging molecular assemblies arranged as crystals such as the purple membrane. In this case, the advantage of image acquisition speed predominates over the disadvantage of high lateral or normal force. For imaging individual macromolecules, which are weakly bonded to the substrate, lateral and normal forces are the relevant factors, and hence the jumping mode, an imaging mode which minimizes lateral and normal forces, is preferable to other imaging modes.

Interplay between the mechanics of bacteriophage fibers and the strength of virus-host links.

Viral fibers play a central role in many virus infection mechanisms since they recognize the corresponding host and establish a mechanical link to its surface. Specifically, bacteriophages have to anchor to bacteria through the fibers surrounding the tail before starting the viral DNA translocation into the host. The protein gene product (gp) 37 from bacteriophage T4 long tail fibers forms a fibrous parallel homotrimer located at the distal end of the long tail fibers. Biochemical data indicate that, at least, three of these fibers are required for initial host cell interaction but do not reveal why three and no other numbers are required. By using atomic force microscopy, we obtained high-resolution images of gp37 fibers adsorbed on a mica substrate in buffer conditions and probed their local mechanical properties. Our experiments of radial indentation at the nanometer scale provided a radial stiffness of ∼ 0.08 N/m and a breaking force of ∼ 120 pN. In addition, we performed finite element analysis and determined a Young's modulus of ∼ 20 MPa. From these mechanical parameters, we hypothesize that three viral fibers provide enough mechanical strength to prevent a T4 virus from being detached from the bacteria by the viral particle Brownian motion, delivering a biophysical justification for the previous biochemical data.

Minimizing tip-sample forces in jumping mode atomic force microscopy in liquid.

Control and minimization of tip-sample interaction forces are imperative tasks to maximize the performance of atomic force microscopy. In particular, when imaging soft biological matter in liquids, the cantilever dragging force prevents identification of the tip-sample mechanical contact, resulting in deleterious interaction with the specimen. In this work we present an improved jumping mode procedure that allows detecting the tip-sample contact with high accuracy, thus minimizing the scanning forces (-100 pN) during the approach cycles. To illustrate this method we report images of human adenovirus and T7 bacteriophage particles which are prone to uncontrolled modifications when using conventional jumping mode.

Initial stages of the contact between a metallic tip and carbon nanotubes.

We present an experimental and theoretical study of the interaction between a tip and single-walled carbon nanotubes (SWCNT) lying on a SiO2 surface. Adhesion and jump-to-contact forces (JC) are measured in a high vacuum system for SWCNT with diameters (D) ranging from 1.4 to 4.5 nm; we find adhesion forces approximately 3.2 nN and JC forces approximately 2.4 nN. Simulations yield adhesion forces in agreement with experiment showing that for D approximately 1.4 nm half of this force is due to tip-SWCNT and tip-SiO2 van der Waals interactions.

Cutting down the forest of peaks in acoustic dynamic atomic force microscopy in liquid.

Acoustic dynamic force microscopy in liquids is a fundamental technique for the investigation of biological samples under physiological conditions. However, it shows an important drawback that consists of producing a myriad of resonance peaks, known as the forest of peaks, which hides the natural resonance frequency of the cantilever and prevents an optimum operation of the microscope. In this work, we propose a simple remedy for this problem, which consists on adding a small clay damper to the dither piezoelectric. The resulting frequency spectrum exhibits a single resonance peak that is comparable with the one obtained using magnetic excitation.

Conductance oscillations in squashed carbon nanotubes.

We report measurements on the radial electromechanical properties of single walled carbon nanotubes. By measuring the conductance of the nanotube, we show that a gap is opened while squashing the nanotubes and that during the deformation stages we observe at least two open-close cycles of the gap. We employ a novel experimental setup where an atomic force microscope tip is used both as an electrode and to induce radial deformations. In contrast with prior experiments reported, this technique allows direct probing of the local electronic structure of carbon nanotubes as they are radially deformed.

DNA-mediated anisotropic mechanical reinforcement of a virus.

In this work, we provide evidence of a mechanism to reinforce the strength of an icosahedral virus by using its genomic DNA as a structural element. The mechanical properties of individual empty capsids and DNA-containing virions of the minute virus of mice are investigated by using atomic force microscopy. The stiffness of the empty capsid is found to be isotropic. Remarkably, the presence of the DNA inside the virion leads to an anisotropic reinforcement of the virus stiffness by approximately 3%, 40%, and 140% along the fivefold, threefold, and twofold symmetry axes, respectively. A finite element model of the virus indicates that this anisotropic mechanical reinforcement is due to DNA stretches bound to 60 concavities of the capsid. These results, together with evidence of biologically relevant conformational rearrangements of the capsid around pores located at the fivefold symmetry axes, suggest that the bound DNA may reinforce the overall stiffness of the viral particle without canceling the conformational changes needed for its infectivity.

Tuning the conductance of single-walled carbon nanotubes by ion irradiation in the Anderson localization regime.

Carbon nanotubes are a good realization of one-dimensional crystals where basic science and potential nanodevice applications merge. Defects are known to modify the electrical resistance of carbon nanotubes; they can be present in as-grown carbon nanotubes, but controlling their density externally opens a path towards the tuning of the electronic characteristics of the nanotube. In this work, consecutive Ar+ irradiation doses are applied to single-walled nanotubes (SWNTs) producing a uniform density of defects. After each dose, the room-temperature resistance versus SWNT length (R(L)) along the nanotube is measured. Our data show an exponential dependence of R(L) indicating that the system is within the strong Anderson localization regime. Theoretical simulations demonstrate that mainly di-vacancies contribute to the resistance increase induced by irradiation, and that just a 0.03% of di-vacancies produces an increase of three orders of magnitude in the resistance of a SWNT of 400 nm length.