RESUMO
Although several porous carbon/graphene nanoribbons (GNRs) have been prepared, a direct comparison of the electronic properties between a nonporous GNR and its periodically perforated counterpart is still missing. Here, we report the synthesis of porous 12-atom-wide armchair-edged GNRs from a bromoarene precursor on a Au(111) surface via hierarchical Ullmann and dehydrogenative coupling. The selective formation of porous 12-GNRs was achieved through thermodynamic and kinetic reaction control combined with tailored precursor design. The structure and electronic properties of the porous 12-GNR were elucidated by scanning tunneling microscopy/spectroscopy and density functional theory calculations, revealing that the pores induce a 2.17 eV band gap increase compared to the nonporous 12-AGNR on the same surface.
RESUMO
In this work, the chemical reduction of a hybrid pyracylene-hexa-peri-hexabenzocoronene (HPH) nanographene was investigated with different alkali metals (Na, K, Rb) to reveal its remarkable multielectron acceptor abilities. The UV-vis and 1H NMR spectroscopy monitoring of the stepwise reduction reactions supports the existence of all intermediate reduction states up to the hexaanion for HPH. Tuning the experimental conditions enabled the synthesis of the HPH anions with gradually increasing reduction states (up to -5) isolated with different alkali metal ions as crystalline materials. The single-crystal X-ray diffraction structure analysis demonstrates that the highly negatively charged HPH anions (-4 and -5) exhibit a drastic geometry change from boat-shaped (observed in the neutral parent, mono- and dianions) to a chair conformation, which was proved to be fully reversible by NMR spectroscopy. DFT calculations show that this geometry change is induced by an enhanced interaction between the coordinated metal ions and negatively charged HPH core in the chair conformation.
RESUMO
The adsorption, reaction and thermal stability of bromine on Rh(111)-supported hexagonal boron nitride (h-BN) and graphene were investigated. Synchrotron radiation-based high-resolution x-ray photoelectron spectroscopy (XPS) and temperature-programmed XPS allowed us to follow the adsorption process and the thermal evolutionin situon the molecular scale. Onh-BN/Rh(111), bromine adsorbs exclusively in the pores of the nanomesh while we observe no such selectivity for graphene/Rh(111). Upon heating, bromine undergoes an on-surface reaction onh-BN to form polybromides (170-240 K), which subsequently decompose to bromide (240-640 K). The high thermal stability of Br/h-BN/Rh(111) suggests strong/covalent bonding. Bromine on graphene/Rh(111), on the other hand, reveals no distinct reactivity except for intercalation of small amounts of bromine underneath the 2D layer at high temperatures. In both cases, adsorption is reversible upon heating. Our experiments are supported by a comprehensive theoretical study. DFT calculations were used to describe the nature of theh-BN nanomesh and the graphene moiré in detail and to study the adsorption energetics and substrate interaction of bromine. In addition, the adsorption of bromine onh-BN/Rh(111) was simulated by molecular dynamics using a machine-learning force field.
RESUMO
A novel, benign synthetic strategy towards soluble tetra(peri-naphthylene)anthracene (TPNA) decorated with triisopropylsilylethynyl substituents has been established. The compound is perfectly stable under ambient conditions in air and features intense and strongly bathochromically shifted UV/vis absorption and emission bands reaching to near-IR region beyond 900â nm. Cyclic voltammetry measurements revealed four facilitated reversible redox events comprising two oxidations and two reductions. These remarkable experimental findings were corroborated by theoretical studies to identify the TPNA platform a particularly useful candidate for the development of functional near-IR fluorophores upon appropriate functionalization.
RESUMO
In a solid catalyst with ionic liquid layer (SCILL), ionic liquid (IL) coatings are used to improve the selectivity of noble metal catalysts. To understand the origins of this selectivity control, we performed model studies by surface science methods in ultrahigh vacuum (UHV). We investigated the growth and thermal stability of ultrathin IL films by infrared reflection absorption spectroscopy (IRAS). We combined these experiments with scanning tunneling microscopy (STM) to obtain information on the orientation of the ions, the interactions with the surface, the intermolecular interactions, and the structure formation. Additionally, we performed DFT calculations and molecular dynamics (MD) simulations to interpret the experimental data. We studied the IL 1-ethyl-3-methylimidazolium trifluoromethanesulfonate [C2 C1 Im][OTf] on Au(111) surfaces. We observe a weakly bound multilayer of [C2 C1 Im][OTf], which is stable up to 390â K, while the monolayer desorbs at â¼450â K. [C2 C1 Im][OTf] preferentially adsorbs at the step edges and elbows of the herringbone reconstruction of Au(111). The anion adsorbs via the SO3 group with the molecular axis perpendicular to the surface. At low coverage, the [C2 C1 Im][OTf] crystallizes in a glass-like 2D phase with short-range order. At higher coverage, we observe a phase transition to a 6-membered ring structure with long-range order.
RESUMO
We investigate the gas-phase chemistry of noncovalent complexes of [10]cycloparaphenylene ([10]CPP) with C60 and C70 by means of atmospheric pressure photoionization and electrospray ionization mass spectrometry. The literature-known [1 : 1] complexes, namely [10]CPPâC60 and [10]CPPâC70 , are observed as radical cations and anions. Their stability and charge distribution are studied using energy-resolved collision-induced dissociation (ER-CID). These measurements reveal that complexes with a C70 core exhibit a greater stability and, on the other hand, that the radical cations are more stable than the respective radical anions. Regarding the charge distribution, in anionic complexes charges are exclusively located on C60 or C70 , while the charges reside on [10]CPP in the case of cationic complexes. [2 : 1] complexes of the ([10]CPP2 âC60/70 )+ â /- â type are observed for the first time as isolated solitary gas-phase species. Here, C60 -based [2 : 1] complexes are less stable than the respective C70 analogues. By virtue of the high stability of cationic [1 : 1] complexes, [2 : 1] complexes show a strongly reduced stability of the radical cations. DFT analyses of the minimum geometries as well as molecular dynamics calculations support the experimental data. Furthermore, our novel gas-phase [2 : 1] complexes are also found in 1,2-dichlorobenzene. Insights into the thermodynamic parameters of the binding process as well as the species distribution are derived from isothermal titration calorimetry (ITC) measurements.
RESUMO
The front cover artwork illustrates the competition of [6]-, [7]- and [8]helicene for attaining a silver(I) cation. This struggle takes place in the electrospray process during solvent evaporation, leading to the well-known tweezer-like surrounding of Ag+ by the helicene in the [1:1] complex. In this competition, the larger helicenes outperform the smaller ones. The main topic of our investigation, however, is the resulting [2:1] complex in which a second helicene attaches via π-π stacking to the [1:1] tweezer complex. Read the full text of the Research Article at 10.1002/cphc.202300496.
RESUMO
Gas-phase complexes of [n]helicenes with n=6, 7 and 8 and the silver(I) cation are generated utilizing electrospray ionization mass spectrometry (ESI-MS). Besides the well-established [1 : 1] helicene/Ag+ -complex in which the helicene provides a tweezer-like surrounding for the Ag+ , there is also a [2 : 1] complex formed. Density functional theory (DFT) calculations in conjunction with energy-resolved collision-induced dissociation (ER-CID) experiments reveal that the second helicene attaches via π-π stacking to the first helicene, which is part of the pre-formed [1 : 1] tweezer complex with Ag+ . For polycyclic aromatic hydrocarbons (PAHs) of planar structure, the [2 : 1] complex with silver(I) is typically structured as an Ag+ -bound dimer in which the Ag+ would bind to both PAHs as the central metal ion (PAH-Ag+ -PAH). For helicenes, the Ag+ -bound dimer is of similar thermochemical stability as the π-π stacked dimer, however, it is kinetically inaccessible. Coronene (Cor) is investigated in comparison to the helicenes as an essentially planar PAH. In analogy to the π-π stacked dimer of the helicenes, the Cor-Ag+ -Cor-Cor complex is also observed. Competition experiments using [n]helicene mixtures reveal that the tweezer complexes of Ag+ are preferably formed with the larger helicenes, with n=6 being entirely ignored as the host for Ag+ in the presence of n=7 or 8.
RESUMO
This study addresses a fundamental question in surface science: the adsorption of halogens on metal surfaces. Using synchrotron radiation-based high-resolution X-ray photoelectron spectroscopy (XPS), temperature-programmed XPS, low-energy electron diffraction (LEED) and density functional theory (DFT) calculations, we investigated the adsorption and thermal stability of bromine on Rh(111) in detail. The adsorption of elemental bromine on Rh(111) at 170â K was followed inâ situ by XPS in the Br 3d region, revealing two individual, coverage-dependent species, which we assign to fcc hollow- and bridge-bound atomic bromine. In addition, we find a significant shift in binding energy upon increasing coverage due to adsorbate-adsorbate interactions. Subsequent heating shows a high thermal stability of bromine on Rh(111) up to above 1000â K, indicating strong covalent bonding. To complement the XPS data, LEED was used to study the long-range order of bromine on Rh(111): we observe a (â3×â3)R30° structure for low coverages (≤0.33â ML) and a star-shaped compression structure for higher coverages (0.33-0.43â ML). Combining LEED and DFT calculations, we were able to visualize bromine adsorption on Rh(111) in real space for varying coverages.
RESUMO
The supramolecular chemistry of cycloparaphenylenes (CPPs) is characterized by the ability of the ring system to undergo both concave and convex π-π interactions. As a consequence, ring-in-ring complexes can be formed in which the CPP serves as the host as well as the guest molecule ([n + x]CPPâ[n]CPP). In this work, host-guest ring-in-ring complexes of [n]CPPs (n = 5-12) are investigated by means of electrospray ionization-tandem mass spectrometry (ESI-MS2) and laser desorption ionization mass spectrometry (LDI-MS). Extending the experimentally known complexes with ring size differences of five and six phenyl units (x = 5 and 6), we observe complexes with ring size differences of three up to seven phenyl units (x = 3-7). Energy-resolved collision experiments reveal that the charge is mainly located at the inner ring and complexes with phenyl unit differences of five and six are the most stable. In complexes featuring the same size difference, the complex stabilities slightly increase with an increasing size of the involved [n]CPPs. Utilizing the π-extended [12]carbon nanobelt ([12]CNB) as the guest also revealed an increase in complex stability. This study paves the way for a deeper understanding of the host-guest chemistry of CPPs.
RESUMO
For open-shell atoms and molecules, Kohn-Sham (KS) methods typically resort to spin-polarized approaches that exhibit spin-contamination and often break spatial symmetries. As a result, the KS Hamiltonian operator and the KS orbitals do not exhibit the space and spin symmetry of the physical electron system. The KS formalism can be symmetrized in a rigorous way only in real space, only in spin space, or both in real and spin space. Within such symmetrized KS frameworks, we present exact-exchange-only optimized-effective-potential (OEP) methods that are free of spin contamination and/or spatial symmetry breaking. The effect of symmetrizations on the total energy and its parts and on the exchange potential is analyzed. The presented exact-exchange-only OEP methods may serve as a starting point for high-level symmetrized KS methods based, e.g., on the adiabatic-connection fluctuation-dissipation theorem.
RESUMO
Recently, Kohn-Sham (KS) methods with new correlation functionals, called σ-functionals, have been introduced. Technically, σ-functionals are closely related to the well-known random phase approximation (RPA); formally, σ-functionals are rooted in perturbation theory along the adiabatic connection. If employed in a post-self-consistent field manner in a Gaussian basis set framework, then, σ-functional methods are computationally very efficient. Moreover, for main group chemistry, σ-functionals are highly accurate and can compete with high-level wave-function methods. For reaction and transition state energies, e.g., chemical accuracy of 1 kcal/mol is reached. Here, we show how to calculate first derivatives of the total energy with respect to nuclear coordinates for methods using σ-functionals and then carry out geometry optimizations for test sets of main group molecules, transition metal compounds, and non-covalently bonded systems. For main group molecules, we additionally calculate vibrational frequencies. σ-Functional methods are found to yield very accurate geometries and vibrational frequencies for main group molecules superior not only to those from conventional KS methods but also to those from RPA methods. For geometries of transition metal compounds, not surprisingly, best geometries are found for RPA methods, while σ-functional methods yield somewhat less good results. This is attributed to the fact that in the optimization of σ-functionals, transition metal compounds could not be represented well due to the lack of reliable reference data. For non-covalently bonded systems, σ-functionals yield geometries of the same quality as the RPA or as conventional KS schemes combined with dispersion corrections.
RESUMO
The front cover artwork is provided by the group of Prof. Dr. Christian Papp at Physical Chemistry II of FAU Erlangen-Nürnberg and FU Berlin. The image shows the isomerization reaction of the molecule pair 2,3-dicyano-norbornadiene/quadricyclane as potential molecular solar thermal (MOST) energy storage system. Read the full text of the Research Article at 10.1002/cphc.202200199.
RESUMO
Molecular solar thermal (MOST) systems are a promising approach for the introduction of sustainable energy storage solutions. We investigated the feasibility of the dicyano-substituted norbornadiene/quadricyclane molecule pair on Ni(111) for catalytic model studies. This derivatization is known to lead to a desired bathochromic shift of the absorption maximum of the parent compound. In our experiments further favorable properties were found: At low temperatures, both molecules adsorb intact without any dissociation. In situ temperature-programmed HR-XPS experiments reveal the conversion of (CN)2 -quadricyclane to (CN)2 -norbornadiene under energy release between 175 and 260â K. The absence of other surface species due to side reactions indicates full isomerization. Further heating leads to the decomposition of the molecular framework into smaller carbonaceous fragments above 290â K and finally to amorphous structures, carbide and nitride above 400â K. DFT calculations gave insights into the adsorption geometries. (CN)2 -norbornadiene is expected to interact stronger with the surface, with flat configurations being favorable. (CN)2 -quadricyclane exhibits smaller adsorption energies with negligible differences for flat and side-on geometries. Simulated XP spectra are in good agreement with experimental findings further supporting the specific spectroscopic fingerprints for both valence isomers.
RESUMO
In this paper, the history, present status, and future of density-functional theory (DFT) is informally reviewed and discussed by 70 workers in the field, including molecular scientists, materials scientists, method developers and practitioners. The format of the paper is that of a roundtable discussion, in which the participants express and exchange views on DFT in the form of 302 individual contributions, formulated as responses to a preset list of 26 questions. Supported by a bibliography of 777 entries, the paper represents a broad snapshot of DFT, anno 2022.
Assuntos
Ciência dos Materiais , HumanosRESUMO
The recently introduced σ-functionals constitute a new type of functionals for the Kohn-Sham (KS) correlation energy. σ-Functionals are based on the adiabatic-connection fluctuation-dissipation theorem, are computationally closely related to the well-known direct random phase approximation (dRPA), and are formally rooted in many-body perturbation theory along the adiabatic connection. In σ-functionals, the function of the eigenvalues σ of the Kohn-Sham response matrix that enters the coupling constant and frequency integration in the dRPA is replaced by another function optimized with the help of reference sets of atomization, reaction, transition state, and non-covalent interaction energies. σ-Functionals are highly accurate and yield chemical accuracy of 1 kcal/mol in reaction or transition state energies, in main group chemistry. A shortcoming of σ-functionals is their inability to accurately describe processes involving a change of the electron number, such as ionizations or electron attachments. This problem is attributed to unphysical self-interactions caused by the neglect of the exchange kernel in the dRPA and σ-functionals. Here, we tackle this problem by introducing a frequency- and σ-dependent scaling of the eigenvalues σ of the KS response function that models the effect of the exchange kernel. The scaling factors are determined with the help of the homogeneous electron gas. The resulting scaled σ-functionals retain the accuracy of their unscaled parent functionals but in addition yield very accurate ionization potentials and electron affinities. Moreover, atomization and total energies are found to be exceptionally accurate. Scaled σ-functionals are computationally highly efficient like their unscaled counterparts.
RESUMO
We present a Kohn-Sham (KS) inversion approach to construct KS exchange-correlation potentials corresponding to given electron densities. This method is based on an iterative procedure using linear response to update potentials. All involved quantities, i.e., orbitals, potentials, and response functions, are represented by Gaussian basis functions. In contrast to previous KS inversion methods relying on Gaussian basis sets, the method presented here is numerically stable even for standard basis sets from basis set libraries due to a preprocessing of the auxiliary basis used to represent an exchange-correlation charge density that generates the exchange-correlation potential. The new KS inversion method is applied to reference densities of various atoms and molecules obtained by full configuration interaction or CCSD(T) (coupled cluster singles doubles perturbative triples). The considered examples encompass cases known to be difficult, such as stretched hydrogen or lithium hydride molecules or the beryllium isoelectronic series. For the stretched hydrogen molecule, potentials of benchmark quality are obtained by employing large basis sets. For the carbon monoxide molecule, we show that the correlation potential from the random phase approximation (RPA) is in excellent qualitative and quantitative agreement with the correlation potential from the KS inversion of a CCSD(T) reference density. This indicates that RPA correlation potentials, in contrast to those from semi-local density-functionals, resemble the exact correlation potential. Besides providing exchange-correlation potentials for benchmark purposes, the proposed KS inversion method may be used in density-partition-based quantum embedding and in subsystem density-functional methods because it combines numerical stability with computational efficiency.
RESUMO
The "solid catalyst with ionic liquid layer" (SCILL) is an extremely successful new concept in heterogeneous catalysis. The idea is to boost the selectivity of a catalyst by its modification with an ionic liquid (IL). Here, we show that it is possible to use the same concept in electrocatalysis for the selective transformation of organic compounds. We scrutinize the electrooxidation of 2,3-butanediol, a reaction which yields two products, singly oxidized acetoin and doubly oxidized diacetyl. When adding the IL (1-ethyl-3-methyl-imidazolium trifluormethanesulfonate, [C2 C1 Im][OTf]), the selectivity for acetoin increases drastically. By in situ spectroscopy, we analyze the underlying mechanism: Specific adsorption of the IL anions suppresses the activation of water for the second oxidation step and, thus, enhances the selectivity for acetoin. Our study demonstrates the great potential of this approach for selective transformation of organic compounds.
RESUMO
We describe a new type of nitrogen-centered polycyclic scaffold comprising a unique combination of 5-, 6-, and 7-membered rings. The compound is accessible through an intramolecular oxidative cyclodehydrogenation of tri(1-naphthyl)amine. To the best of our knowledge this is the very first example of a direct 3-fold cyclization of a triarylamine under oxidative conditions. The unusual ring fusion motif is confirmed by X-ray crystallography and the impact of cyclization on the electronic and photophysical properties is investigated both experimentally and theoretically based on density-functional theory (DFT) calculations. The formation of the unexpected product is rationalized by detailed mechanistic studies on the DFT level. The results suggest the cyclization to occur under kinetic control via a dicationic mechanism.
RESUMO
In solid catalysts with ionic liquid layers (SCILLs), ionic liquid (IL) thin films are used to modify the activity and selectivity of catalytic materials. In this work, we investigated the adsorption behavior of the IL 1-ethyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide [C2C1Im][NTf2] on Pt(111) by combining experimental and theoretical studies. Under ultrahigh vacuum (UHV) conditions, the IL was deposited onto a Pt(111) single crystal surface by physical vapor deposition (PVD) at different surface temperatures (200, 300, and 400 K). The adsorption process was monitored by in situ infrared reflection absorption spectroscopy (IRAS). Complementary to the IRAS studies, we performed density functional theory (DFT) calculations and analyzed the adsorption motifs and orientation of the IL ions. In total, we calculated four different systems: (a) [C2C1Im]+ and [NTf2]- ions in the gas phase; [NTf2]- anions in (b) small (4 × 4) and (c) large (6 × 6) Pt(111) supercells; and (d) a complete ion pair of [C2C1Im][NTf2] in a (6 × 6) Pt(111) supercell. Based on DFT, we simulated IR spectra and compared them to the experimental data. Our results suggest that the binding motif and orientation of the IL is strongly dependent on the actual IL coverage. In the monolayer (ML), [NTf2]- interacts strongly with the metal surface and adopts a specific orientation in which it interacts with the Pt surface via the SO2 groups. Also the [C2C1Im]+ cations adopt a preferential orientation up to coverages of 1 ML. Upon transition to the multilayer region, the specific orientation of the ions is gradually lost.