Assessing the energy trap of industrial agriculture in North America and Europe: 82 balances from 1830 to 2012.

Early energy analyses of agriculture revealed that behind higher labor and land productivity of industrial farming, there was a decrease in energy returns on energy (EROI) invested, in comparison to more traditional organic agricultural systems. Studies on recent trends show that efficiency gains in production and use of inputs have again somewhat improved energy returns. However, most of these agricultural energy studies have focused only on external inputs at the crop level, concealing the important role of internal biomass flows that livestock and forestry recirculate within agroecosystems. Here, we synthesize the results of 82 farm systems in North America and Europe from 1830 to 2012 that for the first time show the changing energy profiles of agroecosystems, including livestock and forestry, with a multi-EROI approach that accounts for the energy returns on external inputs, on internal biomass reuses, and on all inputs invested. With this historical circular bioeconomic approach, we found a general trend towards much lower external returns, little or no increases in internal returns, and almost no improvement in total returns. This "energy trap" was driven by shifts towards a growing dependence of crop production on fossil-fueled external inputs, much more intensive livestock production based on feed grains, less forestry, and a structural disintegration of agroecosystem components by increasingly linear industrial farm managements. We conclude that overcoming the energy trap requires nature-based solutions to reduce current dependence on fossil-fueled external industrial inputs and increase the circularity and complexity of agroecosystems to provide healthier diets with less animal products. Supplementary Information: The online version contains supplementary material available at 10.1007/s13593-023-00925-5.

Synthesis of 1,2-biphenylethane based single-molecule diodes.

We have described the synthesis of novel biphenylethane-based wires for molecular electronics. Exceptional single-molecule diode behavior was predicted for unsymmetrically substituted biphenylethane derivatives, synthesized here using the so far unexplored unsymmetrically substituted 1,2-bis(4-bromophenyl)ethanes as key intermediates, which were obtained from the corresponding tolane precursor by selective hydrogenation.

Computational design of donor-bridge-acceptor systems exhibiting pronounced quantum interference effects.

Quantum interference is a well-known phenomenon that dictates charge transport properties of single molecule junctions. However, reports on quantum interference in donor-bridge-acceptor molecules are scarce. This might be due to the difficulties in meeting the conditions for the presence of quantum interference in a donor-bridge-acceptor system. The electronic coupling between the donor, bridge, and acceptor moieties must be weak in order to ensure localised initial and final states for charge transfer. Yet, it must be strong enough to allow all bridge orbitals to mediate charge transfer. We present the computational route to the design of a donor-bridge-acceptor molecule that features the right balance between these contradicting requirements and exhibits pronounced interference effects.

Cycloaddition reactions of polyenic donor-π-acceptor systems with an electron-rich alkyne: access to new chromophores with second-order optical nonlinearities.

The formal [2 + 2] cycloaddition-cycloreversion (CA-CR) between 4-ethynyl-N,N-dimethylaniline and polyenic Donor-π-Acceptor (D-π-A) systems takes place to yield compounds bearing two donors and one acceptor. Structural, linear and second-order nonlinear optical (NLO) properties of the new molecules reveal the stronger polarization of these systems when compared to analogous merocyanines lacking the dimethylaminophenyl (DMA) ring.

Aromatic/proaromatic donors in 2-dicyanomethylenethiazole merocyanines: from neutral to strongly zwitterionic nonlinear optical chromophores.

Push-pull compounds, in which a proaromatic electron donor is conjugated to a 2-dicyanomethylenethiazole acceptor, have been prepared, and their properties compared to those of model compounds featuring an aromatic donor. A combined experimental (X-ray diffraction, (1) H NMR, IR, Raman, UV/Vis, nonlinear optical (NLO) measurements) and theoretical study reveals that structural and solvent effects determine the ground-state polarisation of these merocyanines: whereas 4H-pyran-4-ylidene- and 4-pyridylidene-containing compounds are zwitterionic and 1,3-dithiol-2-ylidene derivatives are close to the cyanine limit, anilino-derived merocyanines are essentially neutral. This very large range of intramolecular charge transfer (ICT) gives rise to efficient second-order NLO chromophores with µß values ranging from strongly negative to strongly positive. In particular, pyranylidene derivatives are unusual in that they show an increase in the degree of ICT on lengthening the π-spacer, a feature that lies behind the very large negative µß values they display. The linking of the formally quinoidal 2-dicyanomethylenethiazole moiety to proaromatic donors seems a promising approach towards the optimisation of zwitterionic NLO chromophores.

Linear and V-shaped nonlinear optical chromophores with multiple 4H-pyran-4-ylidene moieties.

A simple synthesis of dipolar one- and two-dimensional chromophores bearing two or three 4H-pyran-4-ylidene moieties is reported. Whereas the pyranylidene fragments acting as donors are proaromatic, the spacer one is not. In the linear derivatives, chain elongation gives rise to a sharp increase in the second order nonlinear optical responses, but some V-shaped derivatives display first hyperpolarizabilities (beta) lower than those of their linear analogues. This uncommon feature lends experimental support to previous theoretical studies on the relative contribution and sign of the beta-tensor components.

A systematic review of non-productivity-related animal-based indicators of heat stress resilience in dairy cattle.

INTRODUCTION: Projected temperature rise in the upcoming years due to climate change has increased interest in studying the effects of heat stress in dairy cows. Environmental indices are commonly used for detecting heat stress, but have been used mainly in studies focused on the productivity-related effects of heat stress. The welfare approach involves identifying physiological and behavioural measurements so as to start heat stress mitigation protocols before the appearance of impending severe health or production issues. Therefore, there is growing interest in studying the effects of heat stress on welfare. This systematic review seeks to summarise the animal-based responses to heat stress (physiological and behavioural, excluding productivity) that have been used in scientific literature. METHODS: Using systematic review guidelines set by PRISMA, research articles were identified, screened and summarised based on inclusion criteria for physiology and behaviour, excluding productivity, for animal-based resilience indicators. 129 published articles were reviewed to determine which animal-based indicators for heat stress were most frequently used in dairy cows. RESULTS: The articles considered report at least 212 different animal-based indicators that can be aggregated into body temperature, feeding, physiological response, resting, drinking, grazing and pasture-related behaviour, reactions to heat management and others. The most common physiological animal-based indicators are rectal temperature, respiration rate and dry matter intake, while the most common behavioural indicators are time spent lying, standing and feeding. CONCLUSION: Although body temperature and respiration rate are the animal-based indicators most frequently used to assess heat stress in dairy cattle, when choosing an animal-based indicator for detecting heat stress using scientific literature to establish thresholds, characteristics that influence the scale of the response and the definition of heat stress must be taken into account, e.g. breed, lactation stage, milk yield, system type, climate region, bedding type, diet and cooling management strategies.

A gate-tunable single-molecule diode.

In the pursuit of down-sizing electronic components, the ultimate limit is the use of single molecules as functional devices. The first theoretical proposal of such a device, predicted more than four decades ago, is the seminal Aviram-Ratner rectifier that exploits the orbital structure of the molecule. The experimental realization of single-molecule rectifiers, however, has proven to be challenging. In this work, we report on the experimental realization of a gate-tunable single-molecule rectifier with rectification ratios as high as 600. The rectification mechanism arises from the molecular structure and relies on the presence of two conjugated sites that are weakly coupled through a saturated linker. The observed gate dependence not only demonstrates tunability of the rectification ratio, it also shows that the proposed rectification mechanism based on the orbital structure is operative in the molecule.

Upper airway cavities morphologic features in facial asymmetries.

Facial asymmetries have an important impact on the cranio-facial structures morphology, being the result of the genetic, environmental and dysfunctional factors and their impact on the dento-maxillary complex. Asymmetries can be identified in all craniofacial structures, including the upper airway cavities. Craniofacial asymmetries can influence general growth and development by altering the respiratory function. The present study aimed to evaluate morphologic correlations of the upper airway cavities changes in facial asymmetries. Most of the cases included in the study showed on the underdeveloped side that the nostril and nasal fossa were narrowed, while the paranasal sinuses were frequently larger. However, no correlation could be established to answer whether these changes were determined by asymmetry, or if they appeared as compensatory, or if only some structures of the upper airway cavities changed morphologically in a compensatory manner.

Electrical properties and mechanical stability of anchoring groups for single-molecule electronics.

We report on an experimental investigation of transport through single molecules, trapped between two gold nano-electrodes fabricated with the mechanically controlled break junction (MCBJ) technique. The four molecules studied share the same core structure, namely oligo(phenylene ethynylene) (OPE3), while having different aurophilic anchoring groups: thiol (SAc), methyl sulfide (SMe), pyridyl (Py) and amine (NH2). The focus of this paper is on the combined characterization of the electrical and mechanical properties determined by the anchoring groups. From conductance histograms we find that thiol anchored molecules provide the highest conductance; a single-level model fit to current-voltage characteristics suggests that SAc groups exhibit a higher electronic coupling to the electrodes, together with better level alignment than the other three groups. An analysis of the mechanical stability, recording the lifetime in a self-breaking method, shows that Py and SAc yield the most stable junctions while SMe form short-lived junctions. Density functional theory combined with non-equlibrium Green's function calculations help in elucidating the experimental findings.

Flicker-evoked response measured at the optic disc rim is reduced in ocular hypertension and early glaucoma.

PURPOSE: To determine in patients with ocular hypertension (OHT) or early glaucoma (EOAG) the change in blood flow measured at the neuroretinal rim of the optic disc in response to a 15-Hz diffuse green luminance flicker, a stimulus that activates predominantly the ganglion cell magnocellular pathway. METHODS: Thirteen patients with EOAG, 29 with OHT, and 16 age-matched control subjects, all with excellent fixation, were examined. Blood flow (F(onh)) at the neuroretinal rim of the optic disc was continuously monitored by laser Doppler flowmetry before and during exposure to a 15-Hz, 30 degrees field green luminance flicker. The response of F(onh) to this stimulus (RF(onh)) was expressed as percentage change in F(onh) between baseline and the last 20 seconds of flicker. Two to three temporal sites of the disc were tested, and the highest RF(onh) was considered for further analysis. RF(onh) results in patients were correlated with morphologic (cup-to-disc area ratio, cup shape neuroretinal rim area) and functional (perimetric mean deviation and pattern electroretinogram amplitude) clinical parameters. RESULTS: In the patients with OHT or EOAG, F(onh) and RF(onh) were both reduced compared with their respective values in the control group. Both quantities decreased significantly with neuroretinal rim area when the patients' data were pooled. No significant correlation was found between F(onh) or RF(onh) and the other morphometric and functional parameters. The group-averaged time course of RF(onh) was not significantly different from that in the normal subjects. CONCLUSIONS: Luminance flicker-evoked RF(onh) is abnormally reduced in patients with OHT or EOAG, indicating an impairment of neurally mediated vasoactivity. The data suggest that PERG-derived neural activity and flicker-evoked RF(onh) can be independently altered early in the disease process.

Preoperative cataract surgery use of an intravitreal dexamethasone implant (Ozurdex) in a patient with juvenile idiopathic arthritis and chronic anterior uveitis.

We report a 6-year-old boy with anterior uveitis associated with juvenile idiopathic arthritis (JIA) who underwent cataract extraction in his right eye. One month before surgery he received an intravitreal sustained-release dexamethasone implant. During 10 months' follow-up, his uveitis remained quiet. To our knowledge this is the first report using an intravitreal sustained-release dexamethasone implant as a perioperative anti-inflammatory medication.