Mechanical properties and structure-function trade-offs in secondary xylem of young roots and stems.

Bending and torsional properties of young roots and stems were measured in nine woody angiosperms. The variation in mechanical parameters was correlated to wood anatomical traits and analysed with respect to the other two competing functions of xylem (namely storage and hydraulics). Compared with stems, roots exhibited five times greater flexibility in bending and two times greater flexibility in torsion. Lower values of structural bending and structural torsional moduli (Estr and Gstr, respectively) of roots compared with stems were associated with the presence of thicker bark and a greater size of xylem cells. Across species, Estr and Gstr were correlated with wood density, which was mainly driven by the wall thickness to lumen area ratio of fibres. Higher fractions of parenchyma did not translate directly into a lower wood density and reduced mechanical stiffness in spite of parenchyma cells having thinner, and in some cases less lignified, cell walls than fibres. The presence of wide, partially non-lignified rays contributed to low values of Estr and Gstr in Clematis vitalba. Overall, our results demonstrate that higher demands for mechanical stability in self-supporting stems put a major constraint on xylem structure, whereas root xylem can be designed with a greater emphasis on both storage and hydraulic functions.

Always on the bright side: the climbing mechanism of Galium aparine.

Galium aparine is a herbaceous climbing plant that attaches to host plants mainly via its leaves, which are covered by hooked trichomes. Although such hooks are found on both leaf surfaces, the leaves of G. aparine are mainly positioned upon the leaves of supporting plants and rarely beneath. In order to understand the mechanism underlying this observation, we have studied structural and mechanical properties of single leaf hooks, frictional properties of leaf surfaces, turgor pressure in different leaf tissues and bending properties of the leaves in different directions. Abaxial and adaxial leaf hooks differ significantly in orientation, distribution, structure and mechanical properties. In accordance with these differences, friction properties of leaves depend on the direction of the applied force and differ significantly between both leaf surfaces. This results in a ratchet mechanism. Abaxial leaf hooks provide strong attachment upon the leaves of adjacent plants, whereas adaxial hooks cause a gliding-off from the underside of the leaves of host plants. Thus, the leaves of G. aparine can function as attachment organs, and simultaneously orient themselves advantageously for their photosynthetic function. Further adaptations in turgor pressure or concerning an anisotropy of the flexural stiffness of the leaves have not been found.

Living bridges using aerial roots of ficus elastica - an interdisciplinary perspective.

Here we report on a pilot study of the Living Root Bridges (LRBs) in the Indian State Meghalaya, which are grown with aerial roots of Ficus elastica, a facultative hemiepiphyte developing abundant aerial roots. Locals use these aerial roots to build living bridges, which strengthen themselves over time due to adaptive secondary growth and their capacity to form a mechanically stable structure via inosculations. An extensive inventory of LRBs in Meghalaya including data of location, altitude, approximate age and bridge length was performed in field studies. Root morphology was characterised by measurements of cross-sectional area and shape-related parameters and analysed in relation to the orientation of the roots. LRBs are found to occur mainly in the mountainous limestone rainforests where F. elastica may be native or traditionally cultivated. They cover an altitude range of 57-1211 m a.m.s.l. and display a length of 2 to 52.7 m. Some bridges are several hundreds of years old. Horizontally and vertically trained roots differ significantly in shape and cross-sectional area when approximately even-aged roots are compared. The results are discussed from an interdisciplinary perspective, considering the adaptive traits in the natural life cycle of F. elastica and possible applications in living architecture (Baubotanik).

Spore liberation in mosses revisited.

The ability to perform hygroscopic movements has evolved in many plant lineages and relates to a multitude of different functions such as seed burial, flower protection or regulation of diaspore release. In most mosses, spore release is controlled by hygroscopic movements of the peristome teeth and also of the spore capsule. Our study presents, for the first time, temporally and spatially well-resolved kinematic analyses of these complex shape changes in response to humidity conditions and provides insights into the sophisticated functional morphology and anatomy of the peristome teeth. In Brachythecium populeum the outer teeth of the peristome perform particularly complex hygroscopic movements during hydration and desiccation. Hydration induces fast inward dipping followed by partial re-straightening of the teeth. In their final shape, wet teeth close the capsule. During desiccation, the teeth perform an outward flicking followed by a re-straightening which opens the capsule. We present a kinematic analysis of these shape changes and of the underlying functional anatomy of the teeth. These teeth are shown to be composed of two layers which show longitudinal gradients in their material composition, structure and geometry. We hypothesize that these gradients result in (i) differences in swelling/shrinking capacity and velocity between the two layers composing the teeth, and in (ii) a gradient of velocity of swelling and shrinking from the tip to the base of the teeth. We propose these processes explain the observed movements regulating capsule opening or closing. This hypothesis is corroborated by experiments with isolated layers of peristome teeth. During hydration and desiccation, changes to the shape and mass of the whole spore capsule accompany the opening and closing. Results are discussed in relation to their significance for humidity-based regulation of spore release.

Functional morphology of suction discs and attachment performance of the Mediterranean medicinal leech (Hirudo verbana Carena).

Medicinal leeches use their suction discs for locomotion, adhesion to the host and, in the case of the anterior disc, also for blood ingestion. The biomechanics of their suction-based adhesion systems has been little understood until now. We investigated the functional morphology of the anterior and posterior suckers ofH irudo verbena by using light and scanning electron microscopy. Furthermore, we analysed the adhesion qualitatively and quantitatively by conducting behavioural and mechanical experiments. Our high-speed video analyses provide new insights into the attachment and detachment processes and we present a detailed description of the leech locomotion cycle. Pull-off force measurements of the anterior and posterior suction organs on seven different substrates under both aerial and water-submersed conditions reveal a significant influence of the surrounding medium, the substrate surface roughness and the tested organ on attachment forces and tenacities.

Rose Prickles and Asparagus Spines--Different Hook Structures as Attachment Devices in Climbing Plants.

Functional morphology and biomechanical properties of hook structures functioning as attachment devices in the leaning climbers Rosa arvensis, Rosa arvensis 'Splendens', Asparagus falcatus and Asparagus setaceus are analysed in order to investigate the variability in closely related species as well as convergent developments of hook structure and properties in distant systematic lineages (monocots and dicots). Prickles and spines were characterised by their size, orientation and the maximum force measured at failure in mechanical tests performed with traction forces applied at different angles. In Rosa arvensis and Rosa arvensis 'Splendens' three types of prickles differing largely in geometrical and mechanical properties are identified (prickles of the wild species and two types of prickles in the cultivar). In prickles of Rosa arvensis no particular orientation of the prickle tip is found whereas in the cultivar Rosa arvensis 'Splendens' prickles gradually gain a downward-orientation due to differential growth in the first weeks of their development. Differences in mechanical properties and modes of failure are correlated to geometrical parameters. In Asparagus falcatus and Asparagus setaceus spines are composed of leaf tissue, stem tissue and tissue of the axillary bud. Between species spines differ in size, orientation, distribution along the stem, tissue contributions and mechanical properties. The prickles of Rosa arvensis and its cultivar and the spines of the studied Asparagus species have several traits in common: (1) a gradual change of cell size and cell wall thickness, with larger cells in the centre and smaller thick-walled cells at the periphery of the hooks, (2) occurrence of a diversity of shape and geometry within one individual, (3) failure of single hooks when submitted to moderate mechanical stresses (Fmax/basal area < 35 N/mm²) and (4) failure of the hooks without severe stem damage (at least in the tested wild species).