Nanoscale Surface Compositions and Structures Influence Boron Adsorption Properties of Anion Exchange Resins.

Boron adsorption properties of poly(styrene-co-divinylbenzene) (PSDVB)-based anion-exchange resins with surface-grafted N-methyl-d-glucamine (NMDG) depend strongly on their local surface compositions, structures, and interfacial interactions. Distinct boron adsorption sites have been identified and quantified, and interactions between borate anions and hydroxyl groups of NMDG surface moieties have been established. A combination of X-ray photoelectron spectroscopy (XPS), solid-state nuclear magnetic resonance (NMR), and Fourier-transform infrared (FT-IR) spectroscopy were used to characterize the atomic-level compositions and structures that directly influence the adsorption of borate anions on the NMDG-functionalized resin surface. Surface-enhanced dynamic-nuclear-polarization (DNP)-NMR enabled dilute (3 atom % N) tertiary alkyl amines and quaternary ammonium ions of the NMDG groups to be detected and distinguished with unprecedented sensitivity and resolution at natural abundance 15N (0.4%). Two-dimensional (2D) solid-state 11B{1H}, 13C{1H}, and 11B{11B} NMR analyses provide direct atomic-scale evidence for interactions of borate anions with the NMDG moieties on the resin surfaces, which form stable mono- and bischelate complexes. FT-IR spectra reveal displacements in the stretching vibrational frequencies associated with the O-H and N-H bonds of NMDG groups that corroborate the formation of chelate complexes on the resin surfaces. The atomic-level compositions and structures are related to boron adsorption properties of resin materials synthesized under different conditions, which have important remediation applications.

Fully Aromatic High Performance Thermoset via Sydnone-Alkyne Cycloaddition.

We have developed an efficient synthetic platform for the preparation of a new class of high performance thermosets based on the 1,3-dipolar cycloaddition of a bifunctional sydnone with a trifunctional alkyne. These processable materials possess outstanding thermal stability, with Td5% of 520 °C and a weight loss of <0.1% per day at 225 °C (both in air). Key to this performance is the stability of the starting functional groups that allows for reactive B-staging via simple thermal activation to give fully aromatic and highly cross-linked polypyrazole-based thermosets.

Triple Function Lubricant Additives Based on Organic-Inorganic Hybrid Star Polymers: Friction Reduction, Wear Protection, and Viscosity Modification.

Polymer-based lubricant additives for friction reduction, wear protection, or viscosity improvement have been widely studied. However, single additives achieving all three functions are rare. To address this need, we have explored the combination of polymer topology with organic-inorganic hybrid chemistry to simultaneously vary the temperature- and shear-dependent properties of polymer additives in solution and at solid surfaces. A topological library of lubricant additives, based on statistical copolymers of stearyl methacrylate and methyl methacrylate, ranging from linear to branched star architectures, was prepared using ruthenium-catalyzed controlled radical polymerization. Control over the polymerization yielded additives with low dispersity and comparable molecular weights, allowing evaluation of the influence of polymer architecture on friction reduction, wear protection, and bulk viscosity improvement in a commercial base oil (Yubase 4). Structure-performance relationships for these functions were assessed by a combination of a high-speed surface force apparatus (HS-SFA) experiments, wear track profilometry, quartz crystal microbalance analysis, and solution viscometry. The custom-built HS-SFA provides a unique experimental environment to measure the boundary lubrication performance under extreme shear rates (≈107 s-1) for prolonged times (24 h), mimicking the extreme conditions of automotive applications. These experiments revealed that the performance of the additives as boundary lubricants and wear protectants scales with the degree of branching. The branched architectures prohibit ordering of the additives in thin films under high-load conditions, leading to a thicker absorbed polymer brush boundary layer and therefore enhanced film fluidity and lubricity. Additionally, star polymers with increasing arm number lead to bulk viscosity modification, reflected by a significant increase in the viscosity index compared to the commercial base oil. Although outperformed by linear polymers for bulk viscosity improvement, the (hybrid) star polymers successfully combine the three distinct lubricant additive functions: friction reduction, wear protection, and bulk viscosity improvement-in a single polymeric structure. It should also be noted that, judging from HS-SFA experiments, hybrid stars carrying a silicate-based core outperform their fully organic analogues as boundary lubricants. The enhanced performance is most likely driven by attractive forces between the silicate cores and the employed metallic surfaces. Combining three function in one minimizes formulation complexity and thus opens a route to fundamentally understand and formulate key design parameters for the development of novel multifunction lubricant additives.

Sulfur-functionalized mesoporous carbons as sulfur hosts in Li-S batteries: increasing the affinity of polysulfide intermediates to enhance performance.

The Li-S system offers a tantalizing battery for electric vehicles and renewable energy storage due to its high theoretical capacity of 1675 mAh g(-1) and its employment of abundant and available materials. One major challenge in this system stems from the formation of soluble polysulfides during the reduction of S8, the active cathode material, during discharge. The ability to deploy this system hinges on the ability to control the behavior of these polysulfides by containing them in the cathode and allowing for further redox. Here, we exploit the high surface areas and good electrical conductivity of mesoporous carbons (MC) to achieve high sulfur utilization while functionalizing the MC with sulfur (S-MC) in order to modify the surface chemistry and attract polysulfides to the carbon material. S-MC materials show enhanced capacity and cyclability trending as a function of sulfur functionality, specifically a 50% enhancement in discharge capacity is observed at high cycles (60-100 cycles). Impedance spectroscopy suggests that the S-MC materials exhibit a lower charge-transfer resistance compared with MC materials which allows for more efficient electrochemistry with species in solution at the cathode. Isothermal titration calorimetry shows that the change in surface chemistry from unfunctionalized to S-functionalized carbons results in an increased affinity of the polysulfide intermediates for the S-MC materials, which is the likely cause for enhanced cyclability.

Synthesis of amorphous silicon carbide nanoparticles in a low temperature low pressure plasma reactor.

Commercial scale production of silicon carbide (SiC) nanoparticles smaller than 10 nm remains a significant challenge. In this paper, a microwave plasma reactor and appropriate reaction conditions have been developed for the synthesis of amorphous SiC nanoparticles. This continuous gas phase process is amenable to large scale production use and utilizes the decomposition of tetramethylsilane (TMS) for both the silicon and the carbon source. The influence of synthesis parameters on the product characteristics was investigated. The as-prepared SiC particles with sizes between 4 and 6 nm were obtained from the TMS precursor in a plasma operated at low temperature and low precursor partial pressure (0.001-0.02 Torr) using argon as the carrier gas (3 Torr). The carbon:silicon ratio was tuned by the addition of hydrogen and characterized by x-ray photoelectron spectroscopy. The reaction mechanism of SiC nanoparticle formation in the microwave plasma was investigated by mass spectroscopy of the gaseous products.

Microwave-enhanced reaction rates for nanoparticle synthesis.

Microwave reactor methodologies are unique in their ability to be scaled-up without suffering thermal gradient effects, providing a potentially industrially important improvement in nanocrystal synthetic methodology over convective methods. Synthesis of high-quality, near monodispersity nanoscale InGaP, InP, and CdSe have been prepared via direct microwave heating of the molecular precursors rather than convective heating of the solvent. Microwave dielectric heating not only enhances the rate of formation, it also enhances the material quality and size distributions. The reaction rates are influenced by the microwave field and by additives. The final quality of the microwave-generated materials depends on the reactant choice, the applied power, the reaction time, and temperature. CdSe nanocrystals prepared in the presence of a strong microwave absorber exhibit sharp excitonic features and a QY of 68% for microwave-grown materials. InGaP and InP are rapidly formed at 280 degrees C in minutes, yielding clean reactions and monodisperse size distributions that require no size-selective precipitation and result in the highest out of batch quantum efficiency reported to date of 15% prior to chemical etching. The use of microwave (MW) methodology is readily scalable to larger reaction volumes, allows faster reaction times, removes the need for high-temperature injection, and suggests a specific microwave effect may be present in these reactions.