RESUMO
Recent genomic analyses of evolutionary radiations suggest that ancient introgression may facilitate rapid diversification and adaptive radiation. The loach genus Triplophysa, a genus with most species endemic to Tibetan Plateau, shows ecological diversity and rapid evolution and represents a potential example of adaptive radiation linked to the uplift of the Tibetan Plateau. Here, we interrogate the complex evolutionary history of Triplophysa fishes through the analysis of whole-genome sequences. By reconstructing the phylogeny of Triplophysa, quantifying introgression across this clade, and simulating speciation and migration processes, we confirm that extensive gene flow events occurred across disparate Triplophysa species. Our results suggest that introgression plays a more substantial role than incomplete lineage sorting in underpinning phylogenetic discordance in Triplophysa. The results also indicate that genomic regions affected by ancient gene flow exhibit characteristics of lower recombination rates and nucleotide diversity and may associate with selection. Simulation analysis of Triplophysa tibetana suggests that the species may have been affected by the Gonghe Movement in the third uplift of the Tibetan Plateau, resulting in founder effects and a subsequent reduction in Ne.
Assuntos
Altitude , Cipriniformes , Animais , Filogenia , Tibet , Cipriniformes/genética , Adaptação Fisiológica/genéticaRESUMO
Polymer solar cells (PSCs) with a bulk heterojunction (BHJ) device structure have incredible advantages, such as low-cost fabrication and flexibility. However, the power conversion efficiency (PCE) of BHJ PSCs needs to be further improved to realize their practical applications. In this study, boosted PCEs from PSCs based on BHJ composites incorporated with Fe3 O4 magnetic nanoparticles (MNPs), aligned by an external magnetic field (EMF), are reported. It is found that the coercive electric field within the Fe3 O4 MNPs generated by the EMF has a strong and positive influence on the charge generation, which results in a more than 10% increase in free charge carriers. Moreover, the coercive electric field speeds up the charge carrier transport and suppresses charge carrier recombination within PSCs. In addition, a shortened extraction time makes charge carriers more likely to make it to the electrodes. As a result, more than 15% enhancement in PCE is observed from the PSCs based on the BHJ composite incorporated with the Fe3 O4 MNPs and the EMF as compared with that based on the BHJ composite thin film. This work indicates that the incorporation of MNPs and the EMF is a facile way to enhance the PCEs of PSCs.
Assuntos
Eletricidade , Eritromicina , Eletrodos , Campos Magnéticos , PolímerosRESUMO
The photocurrent multiplication (PM) effect has been used to boost the device performance of polymer-based photodetectors (PDs), but its origin is rarely addressed. In this study, the origins of the PM effect in polymer PDs based on the P3HT:PC71 BM bulk heterojunction (BHJ) composite thin film, where P3HT is poly(3-hexylthiophene), and PC71 BM is [6,6]phenyl-C71 -butyric acid methyl ester, through both computational simulation and experimental investigation are reported. Systematic studies indicate that two key factors play an important role in the realization of the PM effect in polymer PDs. One factor is the work function of the metal electrode, and the other is the PC71 BM aggregations at the interface between the P3HT:PC71 BM BHJ composite thin film and the metal electrode. Moreover, the results from both experimental and computational simulation indicate that the values of the current density under light illumination minus the current density in the dark of polymer PDs are increased simultaneously along with the reduction of the thickness of the P3HT:PC71 BM BHJ composite thin film. The results provide an understanding of the PM effect in polymer PDs and guidance for the development of high-performance polymer PDs based on BHJ composite thin film.
Assuntos
Ésteres , Polímeros , Simulação por Computador , EletrodosRESUMO
The design of new remediation strategies and materials for treating saline-alkaline soils is of fundamental and practical importantance for many applications. Conventional soil remediation strategies mainly focus on the development of fertilizers or additives for water, nutrient, and heavy metal managements in soils, but they often overlook a soil sensing function for early detection of salinization/alkalization levels toward optimal and timely soil remediation. Here, new smart soils, structurally consisting of the upper signal soil and the bottom hygroscopic bed and chemically including zwitterionic, thermo-responsive poly(NIPAM-co-VPES) and poly(NIPAM-co-SBAA) aerogels in each soil layer are formulated. Upon salinization, the resultant smart soils exhibit multiple superior capacities for reducing the soil salinity and alkalinity through ion exchange, controlling the water cycling, modulating the degradation of pyridine-base ligands into water-soluble, nitrogenous salts-rich ingredients for soil fertility, and real-time monitoring salinized soils via pH-induced allochroic color changes. Further studies of plant growth in smart soils with or without salinization treatments confirm a synergy effect of soil remediation and soil sensing on facilitating the growth of plants and increasing the saline-alkaline tolerance of plants. The esign concept of smart soils can be further expanded for soil remediation and assessment.
Assuntos
Metais Pesados , Poluentes do Solo , Fertilizantes , Ligantes , Polímeros , Piridinas , Sais , Solo , Poluentes do Solo/análise , ÁguaRESUMO
Antifouling materials and coatings have broad fundamental and practical applications. Strong hydration at polymer surfaces has been proven to be responsible for their antifouling property, but molecular details of interfacial water behaviors and their functional roles in protein resistance remain elusive. Here, we computationally studied the packing structure, surface hydration, and protein resistance of four poly(N-hydroxyalkyl acrylamide) (PAMs) brushes with different carbon spacer lengths (CSLs) using a combination of molecular mechanics (MM), Monte Carlo (MC), and molecular dynamics (MD) simulations. The packing structure of different PAM brushes were first determined and served as a structural basis for further exploring the CSL-dependent dynamics and structure of water molecules on PAM brushes and their surface resistance ability to lysozyme protein. Upon determining an optimal packing structure of PAMs by MM and optimal protein orientation on PAMs by MC, MD simulations further revealed that poly(N-hydroxymethyl acrylamide) (pHMAA), poly(N-(2-hydroxyethyl)acrylamide) (pHEAA), and poly(N-(3-hydroxypropyl)acrylamide) (pHPAA) brushes with shorter CSLs = 1-3 possessed a much stronger binding ability to more water molecules than a poly(N-(5-hydroxypentyl)acrylamide) (pHPenAA) brush with CSL = 5. Consequently, CSL-induced strong surface hydration on pHMAA, pHEAA, and pHPAA brushes led to high surface resistance to lysozyme adsorption, in sharp contrast to lysozyme adsorption on the pHPenAA brush. Computational studies confirmed the experimental results of surface wettability and protein adsorption from surface plasmon resonance, contact angle, and sum frequency generation vibrational spectroscopy, highlighting that small structural variation of CSLs can greatly impact surface hydration and antifouling characteristics of antifouling surfaces, which may provide structural-based design guidelines for new and effective antifouling materials and surfaces.
RESUMO
Zwitterionic hydrogels are promising biomaterials because of their high water content, three-dimensional network structure, and antifouling property. However, it still remains unclear about how mechanical properties of zwitterionic hydrogels affect their antifouling property. In this work, we propose a simple, thermal-pretreatment method to fabricate poly(sulfobetaine methacrylate) (pSBMA) hydrogels with varied mechanical properties that can be readily tuned by thermal pretreatment time and cross-linker density, as well as to correlate their mechanical property with antifouling property. The resulting thermal-treated pSBMA hydrogels show significantly enhanced mechanical properties with tunable compressive modulus and elastic modulus as compared to the untreated hydrogels. A combination of ELISA investigations and short-term cell adhesion assays also confirm that pSBMA hydrogels exhibit superior antifouling properties to resist protein adsorption and cell adhesion. Further analysis shows a linear inversion correlation between elastic modulus and protein adsorption of pSBMA hydrogels, i.e., the hydrogel with the higher elastic modulus exhibits the lower protein adsorption (the better antifouling property). This work not only provides a simple thermal-pretreatment strategy for fabricating pSBMA hydrogels, but also demonstrates multifunctional properties of the pSBMA hydrogels, which possess a great potential to fulfill some biomedical applications.
RESUMO
BACKGROUND: Leishmaniosis, a disease caused by pathogenic Leishmania parasites, remains an unresolved health problem in the New World and the Old World. It is well known that lizards can be infected by a subgenus of Leishmania parasites, i.e. Sauroleishmania, which is non-pathogenic to humans. However, evidence suggests that lizards may also harbor pathogenic Leishmania species including the undetermined Leishmania sp., discovered in our previous work. Leishmania DNA in lizard blood can be detected by using molecular methods, such as the polymerase chain reaction (PCR). RESULTS: Three hundred and sixteen lizards, representing 13 species of four genera, were captured for blood samples collection in Northwest China. Two reliable molecular markers (cytochrome b and heat shock protein 70 genes) were used for detection in the lizard blood samples, to confirm a widespread presence of pathogenic Leishmania parasites and the distribution pattern of Leishmania spp. in lizards from Northwest China. The PCR data indicated positive detection rate for Leishmania in all the tested lizards with an overall prevalence of 57.91% (183/316). Apart from lizard parasites like Leishmania tarentolae and Leishmania sp., several pathogenic Leishmania including L. turanica, L. tropica and L. donovani complex were identified by using phylogenetic analysis. Co-existence of different haplotypes was observed in most Leishmania DNA-positive lizards with an overall rate of 77.6% (142/183). Even mixed infections with different Leishmania species appeared to occur in the lizards with an overall rate of 37.7% (69/183). CONCLUSIONS: Lizards can harbor pathogenic Leishmania spp. Co-existence of different haplotypes or even species of Leishmania indicates mixed infections in natural lizard host. Lizards may contribute to the spread of Leishmania parasites. The pathogenic Leishmania species detected in lizards from Northwest China may be of great eco-epidemiological importance.
Assuntos
Leishmania/classificação , Leishmaniose/epidemiologia , Lagartos/parasitologia , Animais , China/epidemiologia , DNA de Protozoário/sangue , Haplótipos , Leishmania/genética , Lagartos/sangue , Filogenia , Reação em Cadeia da Polimerase , Análise de Sequência de DNARESUMO
Water as the universal solvent has well-demonstrated its ability to dissolve many substances, but buried water inside different nanoporous materials always exhibits some unusual behaviors. Herein, 3D porous graphene hydrogel (GH) is developed as a super-adsorbent to remove different pollutants (antibiotics, dyes, and heavy ions) for water purification. Due to its highly porous structure and high content of water, GH also demonstrated its super adsorption capacity for adsorbing and removing different pollutants (antibiotics, dyes, and heavy ions) as compared to conventional graphene aerogel (GA). More fundamentally, the buried-water enhanced adsorption mechanism was proposed and demonstrated, such that buried water in GH plays the combinatorial roles as (1) supporting media, (2) transport nanochannels, and (3) hydrogen bondings in promoting pollutant adsorption. In parallel, molecular dynamics simulations further confirm that buried water in GH has the stronger interaction with pollutants via hydrogen bonds than other buried alcohols. GH integrates the merit of both graphene (e.g., fine chemical resistance and excellent mechanical property) and hydrogel (e.g., high water content, porous structure, and simple solution-based processability and scalability), giving it promising potential for environmental applications.
Assuntos
Grafite , Hidrogéis , Poluentes Químicos da Água , Adsorção , Água , Purificação da ÁguaRESUMO
Further correction for 'Low bandgap semiconducting polymers for polymeric photovoltaics' by Chang Liu et al., Chem. Soc. Rev., 2016, DOI: 10.1039/c5cs00650c.
RESUMO
Correction for 'Low bandgap semiconducting polymers for polymeric photovoltaics' by Chang Liu et al., Chem. Soc. Rev., 2016, DOI: .
RESUMO
In order to develop high performance polymer solar cells (PSCs), full exploitation of the sun-irradiation from ultraviolet (UV) to near infrared (NIR) is one of the key factors to ensure high photocurrents and thus high efficiency. In this review, five of the effective design rules for approaching LBG semiconducting polymers with high molar absorptivity, suitable energy levels, high charge carrier mobility and high solubility in organic solvents are overviewed. These design stratagems include fused heterocycles for facilitating π-electron flowing along the polymer backbone, groups/atoms bridging adjacent rings for maintaining a high planarity, introduction of electron-withdrawing units for lowering the bandgap (Eg), donor-acceptor (D-A) copolymerization for narrowing Eg and 2-dimensional conjugation for broadened absorption and enhanced hole mobility. It has been demonstrated that LBG semiconducting polymers based on electron-donor units combined with strong electron-withdrawing units possess excellent electronic and optic properties, emerging as excellent candidates for efficient PSCs. While for ultrasensitive photodetectors (PDs), which have intensive applications in both scientific and industrial sectors, sensing from the UV to the NIR region is of critical importance. For polymer PDs, Eg as low as 0.8 eV has been obtained through a rational design stratagem, covering a broad wavelength range from the UV to the NIR region (1450 nm). However, the response time of the polymer PDs are severely limited by the hole mobility of LBG semiconducting polymers, which is significantly lower than those of the inorganic materials. Thus, further advancing the hole mobility of LBG semiconducting polymers is of equal importance as broadening the spectral response for approaching uncooled ultrasensitive broadband polymer PDs in the future study.
RESUMO
The advance in lifestyle, modern industrialization and future technological revolution are always at high expense of energy consumption. Unfortunately, there exist serious issues such as limited storage, high cost and toxic contamination in conventional fossil fuel energy sources. Instead, solar energy represents a renewable, economic and green alternative in the future energy market. Among the photovoltaic technologies, organic photovoltaics (OPVs) demonstrate a cheap, flexible, clean and easy-processing way to convert solar energy into electricity. However, OPVs with a conventional device structure are still far away from industrialization mainly because of their short lifetime and the energy-intensive deposition of top metal electrode. To address the stability and cost issue simultaneously, an inverted device structure has been introduced into OPVs, bridging laboratory research with practical application. In this review, recent progress in device structures, working mechanisms, functions and advances of each component layer as well their correlations with the efficiency and stability of inverted OPVs are reviewed and illustrated.
RESUMO
Fabricating homogeneous and high-quality perovskite thin films via low-temperature solution processing is a challenge to realizing high-efficiency perovskite hybrid solar cells (pero-HSCs). Here, an approach is reported to realize smooth surface morphology of methylammonium lead iodide (CH3 NH3 PbI3 ) perovskite thin films via using strong-polar ethanol solution rather than less-polar isopropanol solution, which was previously used as the solvent for preparing perovskite thin films. In comparison with the pero-HSCs processed from isopropanol solution, more than 40% enhanced efficiency is observed from pero-HSCs processed from ethanol solution. The enhanced efficiency is attributed to a homogeneous high-quality perovskite thin film with dramatically low root-mean-square roughness and completely conversion of lead (II) iodide (PbI2 ) to CH3 NH3 PbI3 . The findings provide a simple way to realize high-efficiency high-reproducible pero-HSCs.
RESUMO
Emerging evidence have shown that the patients with Alzheimer's disease (AD) often have a higher risk of later developing type II diabetes (T2D), and vice versa, suggesting a potential pathological link between AD and T2D. Amyloid-ß (Aß) and human islet amyloid polypeptide (hIAPP) are the principle causative components responsible for the pathologies of AD and T2D, respectively. The cross-sequence interactions between Aß and hIAPP may provide a molecular basis for better understanding the potential link between AD and T2D. Herein, we systematically modeled and simulated the cross-sequence aggregation process, molecular interactions, and polymorphic structures of full-length Aß and hIAPP peptides using a combination of coarse-grained (CG) replica-exchange molecular dynamics (REMD) and all-atom molecular dynamics (MD) simulations, with particular focus on the effect of association models between Aß and hIAPP on the structural stability and polymorphic populations of hybrid Aß-hIAPP aggregates. Four distinct association models (double-layer, elongation, tail-tail, and block models) between Aß and hIAPP oligomers were identified, and the associated polymorphic Aß-hIAPP structures were determined as well. Among them, different association models led to different Aß-hIAPP aggregates, with large differences in structural morphologies and populations, interacting interfaces, and underlying association forces. The computational models support the cross-sequence interactions between Aß and hIAPP pentamers, which would lead to the complex hybrid Aß-hIAPP assemblies. This computational work may also provide a different point of view to a better understanding of a potential link between AD and T2D.
Assuntos
Doença de Alzheimer/metabolismo , Peptídeos beta-Amiloides/metabolismo , Diabetes Mellitus Tipo 2/metabolismo , Polipeptídeo Amiloide das Ilhotas Pancreáticas/metabolismo , Fragmentos de Peptídeos/metabolismo , Agregação Patológica de Proteínas/metabolismo , Doença de Alzheimer/complicações , Peptídeos beta-Amiloides/química , Diabetes Mellitus Tipo 2/complicações , Humanos , Polipeptídeo Amiloide das Ilhotas Pancreáticas/química , Simulação de Dinâmica Molecular , Fragmentos de Peptídeos/química , Agregação Patológica de Proteínas/complicações , Multimerização Proteica , Estrutura Secundária de Proteína , TermodinâmicaRESUMO
Cross-sequence interactions between different amyloid peptides are important not only for the fundamental understanding of amyloid aggregation and polymorphism mechanisms, but also for probing a potential molecular link between different amyloid diseases. Here, we computationally modeled and simulated a series of hybrid hIAPP (human islet amyloid polypeptide)-rIAPP (rat islet amyloid polypeptide) assemblies and probed their structural stability, lateral association, and interfacial interactions using combined peptide-packing search, molecular dynamics (MD) simulations, and the Monte Carlo sampling method. We then identified a number of stable and highly populated hIAPP-rIAPP assemblies at the lowest energy states, in which hIAPP and rIAPP oligomers were stacked laterally on top of each other to form supramolecular ß-sheet double layers in an antiparallel fashion. These hIAPP-rIAPP assemblies adopted different interfaces formed by C-terminal ß-sheets of hIAPP and rIAPP oligomers (hCCr), N-terminal ß-sheets of hIAPP and rIAPP oligomers (hNNr), and alternative N-terminal/C-terminal ß-sheets of hIAPP and rIAPP oligomers (hNCr and hCNr). Different interfaces along with distinct interfacial residue packings provided different driving interfacial forces to laterally associate two ß-sheet layers of hIAPP and rIAPP together for forming polymorphic hIAPP-rIAPP assemblies. Such lateral association between hIAPP and rIAPP not only explained the experimentally observed cross-seeding behavior of hIAPP and rIAPP, but also demonstrated the co-existence of polymorphic amyloid cross-seeding species. A cross-seeding mechanism for hIAPP and rIAPP aggregation was proposed on the basis of our simulated models and experimental data. This work provides a better understanding of cross-seeding aggregation and polymorphism mechanisms of amyloidogenesis.
Assuntos
Polipeptídeo Amiloide das Ilhotas Pancreáticas/química , Simulação de Dinâmica Molecular , Multimerização Proteica , Sequência de Aminoácidos , Animais , Humanos , Dados de Sequência Molecular , Método de Monte Carlo , Estabilidade Proteica , Estrutura Secundária de Proteína , RatosRESUMO
PURPOSE: This study aimed to evaluate the influence of comorbid chronic diseases (CCD) and physical activity (PA) on quality of life (QOL) in lung cancer survivors (LCSs). METHODS: The study used a cross-sectional study design. A total of 701 LCSs were recruited from 17 comprehensive cancer rehabilitation clubs in Shanghai, China. Measurements used included the European Organization for Research and Treatment quality of life version 3 questionnaire (EORTC QLQ-C30) and the Functional Assessment of Cancer Therapy -General version 4 questionnaire (FACT-G). Independent variables were CCD and PA. Multiple linear regression models were used to control for the effect of sociodemographic characteristic. RESULTS: Subjects with CCD generally reported lower scores for most EORTC QLQ-C30 and FACT-G scales when compared to subjects without CCD, indicating poorer QOL. Subjects with PA generally reported higher scores for most EORTC QLQ-C30 and FACT-G scales when compared to subjects without PA, indicating better QOL. The influences of five times and more PA per week were larger than the influence of less than five times PA per week. Subjects without CCD and with PA generally reported similar scores for most EORTC QLQ-C30 and FACT-G scales when compared to others without CCD and PA. Subjects with CCD and PA generally reported higher scores for most EORTC QLQ-C30 and FACT-G scales when compared to other LCSs with CCD and without PA. CONCLUSIONS: CCD have significantly negative influence on QOL. PA has significantly positive influence on QOL among the LCSs with CCD, not among the other LCSs without CCD.
Assuntos
Doença Crônica/psicologia , Neoplasias Pulmonares/epidemiologia , Neoplasias Pulmonares/psicologia , Qualidade de Vida/psicologia , Sobreviventes/psicologia , Adulto , Idoso , China , Comorbidade , Estudos Transversais , Feminino , Humanos , Modelos Lineares , Masculino , Pessoa de Meia-Idade , Atividade Motora , Inquéritos e QuestionáriosRESUMO
Human islet amyloid polypeptide (hIAPP) can assemble into toxic oligomers and fibrils, which are associated with cell degeneration and the pathogenesis of type 2 diabetes. Cross-interaction of hIAPP with rat IAPP (rIAPP)--a non-amyloidogenic peptide with high sequence similarity to hIAPP--might influence the aggregation and toxicity of hIAPP. However, the exact role of rIAPP in hIAPP aggregation and toxicity still remains unclear. In this work, we investigated the effect of cross-sequence interactions between full-length hIAPP(1-37) and rIAPP(1-37) on hybrid amyloid structures, aggregation kinetics, and cell toxicity using combined computational and experimental approaches. Experimental results indicate a contrasting role of rIAPP in hIAPP aggregation, in which rIAPP initially inhibits the early aggregation and nuclei formation of hIAPP, but hIAPP seeds can also recruit both hIAPP and rIAPP to form more hybrid fibrils, thus promoting amyloid fibrillation ultimately. The coincubation of hIAPP and rIAPP also decreases cell viability, presumably due to the formation of more toxic hybrid oligomers at the prolonged lag phase. Comparative MD simulations confirm that the cross-sequence interactions between hIAPP and rIAPP stabilize ß-sheet structure and thus likely promote their fibrillization. This work provides valuable insights into a critical role of cross-amyloid interactions in protein aggregation.
Assuntos
Polipeptídeo Amiloide das Ilhotas Pancreáticas/química , Animais , Humanos , Estrutura Secundária de Proteína , RatosRESUMO
Studies indicated that two-dimensional (2D) metal halide perovskites (MHPs) embodied with three-dimensional (3D) MHPs were a facile way to realize efficient and stable perovskite solar cells (PSCs) and perovskite photodetectors (PPDs). Here, high-performance PSCs and PPDs, which are based on 2D/3D MHPs bilayer thin films, where the 2D MHPs are created by binary conjugated organic cations, are reported. Systemically studies reveal that the above novel 2D/3D MHPs bilayer thin films possess an enlarged crystal size, balanced charge transport, reduced charge carrier recombination, smaller charge-transfer resistance, and accelerated charge-extraction process compared to the 2D/3D MHPs bilayer thin films, where the 2D MHPs are created by a single conjugated organic cation. As a result, the PSCs based on the above novel 2D/3D MHPs bilayer thin film exhibit a power conversion efficiency of 22.76%. Moreover, unencapsulated PSCs possess dramatically enhanced stability compared with those based on the 2D/3D MHPs bilayer thin films, where the 2D MHPs are created by a single conjugated organic cation. In addition, the PPDs based on the above novel 2D/3D MHPs bilayer thin film exhibit a projected detectivity of 1016 cm Hz1/2/W and a linear dynamic range of 108 dB at room temperature. Our studies indicate that the development of binary conjugated organic cation-based 2D MHPs incorporated with 3D MHPs is a simple method to realize high-performance PSCs and PPDs.
RESUMO
The emergence and reemergence of microbial infection demand an urgent response to develop effective biomaterials that prevent biofilm formation and associated bacterial infection. In this work, we have synthesized and characterized hybrid poly(N-hydroxyethylacrylamide) (polyHEAA)/salicylate (SA) hydrogels with integrated antifouling and antimicrobial capacities. The antifouling efficacy of polyHEAA hydrogels was examined via exposure to proteins, cells, and bacteria, while the antimicrobial activity of SA-treated polyHEAA hydrogels was investigated against both gram-negative Escherichia coli RP437 and gram-positive Staphylococcus epidermidis. The results showed that polyHEAA/SA hydrogels exhibited high surface resistance to protein adsorption, cell adhesion, and bacteria attachment. The polyHEAA hydrogels were also characterized by their water content and state of water, revealing a strong ability to contain and retain high nonfreezable water content. This work demonstrates that the hybrid polyHEAA/SA hydrogels can be engineered to possess both antifouling and antimicrobial properties, which can be used for different in vitro and in vivo applications against bacterial infection.
Assuntos
Resinas Acrílicas/farmacologia , Antibacterianos/farmacologia , Incrustação Biológica/prevenção & controle , Escherichia coli/efeitos dos fármacos , Hidrogéis/farmacologia , Salicilatos/farmacologia , Staphylococcus epidermidis/efeitos dos fármacos , Resinas Acrílicas/química , Antibacterianos/química , Hidrogéis/química , Testes de Sensibilidade Microbiana , Estrutura Molecular , Salicilatos/químicaRESUMO
We have demonstrated a novel sensing strategy employing single-stranded probe DNA, unmodified gold nanoparticles, and a positively charged, water-soluble conjugated polyelectrolyte to detect a broad range of targets including nucleic acid (DNA) sequences, proteins, small molecules, and inorganic ions. This nearly "universal" biosensor approach is based on the observation that, while the conjugated polyelectrolyte specifically inhibits the ability of single-stranded DNA to prevent the aggregation of gold-nanoparticles, no such inhibition is observed with double-stranded or otherwise "folded" DNA structures. Colorimetric assays employing this mechanism for the detection of hybridization are sensitive and convenient--picomolar concentrations of target DNA are readily detected with the naked eye, and the sensor works even when challenged with complex sample matrices such as blood serum. Likewise, by employing the binding-induced folding or association of aptamers we have generalized the approach to the specific and convenient detection of proteins, small molecules, and inorganic ions. Finally, this new biosensor approach is quite straightforward and can be completed in minutes without significant equipment or training overhead.