3D exoscopic versus microscopic superficial temporal artery to middle cerebral artery bypass surgery for moyamoya disease - a comparative series.

PURPOSE: Superficial temporal artery to middle cerebral artery (STA-MCA) direct bypass surgery is the most common surgical procedure to treat moyamoya disease (MMD). Here, we aim to compare the performance of the 3D exoscope in bypass surgery with the gold standard operative microscope. METHODS: All direct STA-MCA bypass procedures performed at a single university hospital for MMD between 2015 and 2023 were considered for inclusion. Data were retrospectively collected from patient files and surgical video material. From 2020 onwards, bypass procedures were exclusively performed using a digital three-dimensional exoscope as visualization device. Results were compared with a microsurgical bypass control group (2015-2019). The primary endpoint was defined as total duration of surgery, duration of completing the vascular anastomosis (ischemia time), bypass patency, number of stiches to perform the anastomosis, added stiches after leakage testing of the anastomosis and the Glasgow outcome scale (GOS) at last follow-up as secondary outcome parameter. RESULTS: A total of 16 consecutive moyamoya patients underwent 21 STA-MCA bypass procedures. Thereof, six patients were operated using a microscope and ten patients using an exoscope (ORBEYE® n = 1; AEOS® n = 9). Total duration of surgery was comparable between devices (microscope: 313 min. ± 116 vs. exoscope: 279 min. ± 42; p = 0.647). Ischemia time also proved similar between groups (microscope: 43 min. ± 19 vs. exoscope: 41 min. ± 7; p = 0.701). No differences were noted in bypass patency rates. The number of stiches per anastomosis was similar between visualization devices (microscope: 17 ± 4 vs. exoscope: 17 ± 2; p = 0.887). In contrast, more additional stiches were needed in microscopic anastomoses after leakage testing the bypass (p = 0.035). CONCLUSION: Taking into account the small sample size, end-to-side bypass surgery for moyamoya disease using a foot switch-operated 3D exoscope was not associated with more complications and led to comparable clinical and radiological results as microscopic bypass surgery.

Changes in treatment of intracranial aneurysms during the last decade in a large European neurovascular center.

OBJECTIVE: Treatment modality for ruptured and unruptured intracranial aneurysms has shifted during the last two decades from microsurgical treatment towards endovascular treatment. We present how this transition happened in a large European neurovascular center. METHODS: We conducted a retrospective observational study consecutive patients treated for an unruptured or ruptured intracranial aneurysm at Helsinki University Hospital during 2012-2022. We used Poisson regression analysis to report age-adjusted treatment trends by aneurysm location and rupture status. RESULTS: A total of 2491 patients with intracranial aneurysms were treated (44% ruptured, 56% unruptured): 1421 (57%) surgically and 1070 (43%) endovascularly. A general trend towards fewer treated aneurysms was noted. The proportion of patients treated surgically decreased from 90% in 2012 to 20% in 2022. The age-adjusted decrease of surgical versus endovascular treatment was 6.9%/year for all aneurysms, 6.8% for ruptured aneurysms, and 6.8% for unruptured aneurysms. The decrease of surgical treatment was most evident in unruptured vertebrobasilar aneurysms (10.8%/year), unruptured communicating artery aneurysms (10.1%/year), ruptured communicating artery aneurysms (10.0%/year), and ruptured internal carotid aneurysms (9.0%/year). There was no change in treatment modality for middle cerebral artery aneurysms, of which 85% were still surgically treated in 2022. A trend towards an increasing size for treated ruptured aneurysms was found (p = 0.033). CONCLUSION: A significant shift of the treatment modality from surgical to endovascular treatment occurred for all aneurysm locations except for middle cerebral artery aneurysms. Whether this shift has affected long-term safety and patient outcomes should be assessed in the future.

Even short-term training improves the skills of novice exoscope users: a prospective laboratory experiment.

BACKGROUND: The surgical 3D exoscopes have recently been introduced as an alternative to the surgical microscopes in microneurosurgery. Since the exoscope availability is still limited, it is relevant to know whether even a short-term exoscope training develops the skills needed for performing exoscope-assisted surgeries. METHODS: Ten participants (six consultants, four residents) performed two laboratory bypass test tasks with a 3D exoscope (Aesculap Aeos®). Six training sessions (6 h) were performed in between (interval of 2-5 weeks) on artificial models. The participants were divided into two groups: test group (n = 6) trained with the exoscope and control group (n = 4) with a surgical microscope. The test task was an artificial end-to-side microsurgical anastomosis model, using 12 interrupted 9-0 sutures and recorded on video. We compared the individual as well as group performance among the test subjects based on suturing time, anastomosis quality, and manual dexterity. RESULTS: Altogether, 20 bypass tasks were performed (baseline n = 10, follow-up n = 10). The median duration decreased by 28 min and 44% in the exoscope training group. The decrease was steeper (29 min, 45%) among the participants with less than 6 years of microneurosurgery experience compared to the more experienced participants (13 min, 24%). After training, the participants with at least 1-year experience of using the exoscope did not improve their task duration. The training with the exoscope led to a greater time reduction than the training with the microscope (44% vs 17%). CONCLUSIONS: Even short-term training with the exoscope led to marked improvements in exoscope-assisted bypass suturing among novice microneurosurgeons. For the more experienced participants, a plateau in the initial learning curve was reached quickly. A much longer-term effort might be needed to witness further improvement in this user group.

Taming the exoscope: a one-year prospective laboratory training study.

PURPOSE: Digital 3D exoscopes have been recently introduced as an alternative to a surgical microscope in microneurosurgery. We designed a laboratory training program to facilitate and measure the transition from microscope to exoscope. Our aim was to observe the effect of a one-year active training on microsurgical skills with the exoscope by repeating a standardized test task at several time points during the training program. METHODS: Two board-certified neurosurgeons with no previous exoscope experience performed the same test tasks in February, July, and November during a 12-month period. In between the test tasks, both participants worked with the exoscope in the laboratory and assisted during clinical surgeries on daily basis. Each of the test segments consisted of repeating the same task 10 times during one week. Altogether, 60 test tasks were performed, 30 each. The test task consisted of dissecting and harvesting the ulnar and radial arteries of the second segment of a chicken wing using an exoscope (Aesculap AEOS). Each dissection was recorded on video and analyzed by two independent evaluators. We measured the time required to complete the task as well as several metrics for evaluating the manual skills of the dissection and handling of the exoscope system. RESULT: There was a clear reduction in dissection time between the first and the last session, mean 34 min (SD 5.96) vs. 26 min (SD 8.69), respectively. At the end of the training, both neurosurgeons used the exoscope more efficiently utilizing more available options of the device. There was correlation between the dissection time and several of the factors we used for evaluating the work flow: staying in focus, zoom control, reduction of unnecessary movements or repetitive manual motions, manipulation technique of the vessel under dissection, handling of the instruments, and using them for multiple dissection purposes (stretching, cutting, and splitting). CONCLUSION: Continuous, dedicated long-term training program is effective for microsurgical skill development when switching from a microscope to an exoscope. With practice, the micromotor movements become more efficient and the use of microinstruments more versatile.

Small amount of alcohol did not deteriorate microsurgical dexterity: a prospective laboratory study.

BACKGROUND: Alcohol consumption has been reported to deteriorate surgical performance both immediately after consumption as well as on the next day. We studied the early effects of alcohol consumption on microsurgical manual dexterity in a laboratory setting. METHOD: Six neurosurgeons or neurosurgical residents (all male) performed micro- and macro suturing tasks after consuming variable amounts of alcohol. Each participant drank 0-4 doses of alcohol (14 g ethanol). After a delay of 60-157 min, he performed a macrosurgical and microsurgical task (with a surgical microscope). The tasks consisted of cutting and re-attaching a circular latex flap (diameter: 50 mm macrosuturing, 4 mm microsuturing) with eight interrupted sutures (4-0 multifilament macrosutures, 9-0 monofilament microsutures). We measured the time required to complete the sutures, and the amplitude and the frequency of physiological tremor during the suturing. In addition, we used a four-point ordinal scale to rank the quality of the sutures for each task. Each participant repeated the tasks several times on separate days varying the pre-task alcohol consumption (including one sober task at the end of the data collection). RESULTS: A total of 93 surgical tasks (47 macrosurgical, 46 microsurgical) were performed. The fastest microsurgical suturing (median 11 min 49 s, [interquartile range (IQR) 654 to 761 s]) was recorded after three doses of alcohol (median blood alcohol level 0.32‰). The slowest microsurgical suturing (median 15 min 19 s, [IQR 666 to 1121 s]) was observed after one dose (median blood alcohol level 0‰). The quality of sutures was the worst (mean 0.70 [standard deviation (SD) 0.48] quality points lost) after three doses of alcohol and the best (mean 0.33 [SD 0.52] quality points lost) after four doses (median blood alcohol level 0.44‰). CONCLUSIONS: Consuming small amount of alcohol did not deteriorate microsurgical performance in our study. An observed reduction in physiological tremor may partially explain this.

Recurrence of brain arteriovenous malformations in pediatric patients: a long-term follow-up study.

BACKGROUND: Previously thought to be congenital, AVMs have shown evidence of de-novo formation and continued growth, thus shifting thoughts on their pathophysiology. Pediatric AVM patients have been reported to be more prone to develop AVM recurrence after a seemingly complete cure. Therefore, we assessed the risk of AVM treated in childhood to recur in adulthood after a long-term follow-up in our own cohort. METHODS: Control DS-angiography was arranged during 2021-2022 as part of a new protocol for all AVM patients who were under 21 years of age at the time of their treatment and in whom the treatment had occurred at least five years earlier. Angiography was offered only to patients under 50 years of age at the time of the new protocol. The complete eradication of AVM after the primary treatment had been originally confirmed with DSA in every patient. RESULTS: A total of 42 patients participated in the late DSA control, and 41 of them were included in this analysis after excluding the patient diagnosed with HHT. The median age at the time of admission for AVM treatment was 14.6 (IQR 12-19, range 7-21 years) years. The median age at the time of the late follow-up DSA was 33.8 years (IQR 29.8-38.6, range 19.4-47.9 years). Two recurrent sporadic AVMs and one recurrent AVM in a patient with hereditary hemorrhagic telangiectasia (HHT) were detected. The recurrence rate was 4.9% for sporadic AVMs and 7.1% if HHT-AVM was included. All the recurrent AVMs had originally bled and been treated microsurgically. The patients with sporadic AVM recurrence had been smoking their whole adult lives. CONCLUSIONS: Pediatric and adolescent patients are prone to develop recurrent AVMs, even after complete AVM obliteration verified by angiography. Therefore, imaging follow-up is recommended.

Evaluation of enamel roughness after orthodontic debonding and clean-up procedures using zirconia, tungsten carbide, and white stone burs: an in vitro study.

BACKGROUND: The main goal of orthodontic debonding is to restore the enamel surface as closely as possible to its pretreatment condition without iatrogenic damage. This study aimed to compare the effects of different adhesive removal burs; zirconia burs, tungsten carbide burs, and white stone burs on enamel surface roughness. MATERIALS AND METHODS: Total sample of 72 extracted premolars was randomly divided into three equal groups (n = 24) depending on the method of adhesive removal: zirconia burs (ZB); tungsten carbide burs (TC); and white stones (WS). The metal brackets were bonded using Transbond XT orthodontic adhesive (3 M Unitek, Monrovia, CA, USA) and debonded after 24 h using a debonding plier, then the ARI was assessed. The adhesive remnants were removed using the different burs and Final polishing was performed using Sof-lex discs and spirals. Thirteen samples from each group were evaluated using a Mitutoyo SJ-210 profilometer to determine average surface roughness (Ra) and three samples from each group were examined under Scanning Electron Microscopy (SEM) to determine EDI score. The evaluations were performed at three time points; before bonding (T0), after adhesive removal (T1) and after polishing (T2) and the time consumed for adhesive removal by burs was recorded in seconds. The data were analyzed statistically by ANOVA, Tukey's test and Kruskal-Wallis H-test. RESULTS: Kruskal-Wallis H-test showed no statistically significant difference of ARI in all studied groups (p = 0.845) and two-way mixed ANOVA revealed that all burs significantly increased surface roughness at T1 compared to T0 (p < 0.001) in all groups with the lowest Ra values were observed in the ZB group, followed by the TC group, and WS group. The fastest procedure was performed with WS, followed by ZB, then TC bur (p < 0.001). After polishing (T2), Ra values showed no significant difference in ZB group (P = 0.428) and TC group (P = 1.000) as compared to T0, while it was significant in WS group (p < 0.001). CONCLUSION: zirconia bur was comparable to tungsten carbide bur and can be considered as alternative to white stone which caused severe enamel damage. The polishing step created smoother surface regardless of the bur used for resin removal.

Comparison of Enamel Surface Roughness after Bracket Debonding and Adhesive Resin Removal Using Different Burs with and without the Aid of a Magnifying Loupe.

AIM: This study aimed to evaluate the impact of using a magnifying dental loupe on enamel surface roughness during adhesive resin removal by different burs. MATERIALS AND METHODS: Ninety-six extracted premolar teeth were randomly divided according to the bur used with or without the aid of a magnifying loupe into four equal groups (N = 24): group I: naked eye tungsten carbide burs (NTC); group II: magnifying loupe tungsten carbide burs (MTC); group III: naked eye white stones (NWS); and group IV: magnifying loupe white stones (MWS). The initial surface roughness (Ra) T0 was evaluated using a profilometer, and the scanning electronic microscopy (SEM) technique. The metal brackets were bonded and debonded after 24 hours with debonding plier. After adhesive removal, Ra was evaluated again (T1) also the time spent on adhesive removal was recorded in seconds. The samples were finally polished by Sof-Lex discs and Sof-Lex spirals, and the third Ra evaluation was performed (T2). RESULTS: The results of two-way mixed analysis of variance (ANOVA) showed that all burs increased surface roughness at T1 as compared to T0 (p < 0.001) with the highest Ra values shown in group III followed by group IV, group I, and group II. After polishing, no significant difference was noted in Ra values in group I and group II at T0 vs T2 (p = 1.000), while it was significant in group III and group IV (p < 0.001). Regarding the time required for adhesive removal, the shortest time was in group IV followed by groups III, II, and I, respectively. CONCLUSION: The use of a magnifying loupe affects the quality of the clean-up procedure by reducing the enamel surface roughness and the time spent on adhesive removal. CLINICAL SIGNIFICANCE: Using a magnifying loupe was helpful during orthodontic debonding and adhesive removal.

Development and validation of the Adverse Inpatient Medication Event model (AIME).

AIMS: Medication harm has negative clinical and economic consequences, contributing to hospitalisation, morbidity and mortality. The incidence ranges from 4 to 14%, of which up to 50% of events may be preventable. A predictive model for identifying high-risk inpatients can guide a timely and systematic approach to prioritisation. The aim of this study is to develop and internally validate a risk prediction model for prioritisation of hospitalised patients at risk of medication harm. METHODS: A retrospective cohort study was conducted in general medical and geriatric specialties at an Australian hospital over six months. Medication harm was identified using International Classification of Disease (ICD-10) codes and the hospital's incident database. Sixty-eight variables, including medications and laboratory results, were extracted from the hospital's databases. Multivariable logistic regression was used to develop the final risk model. Performance was evaluated using area under the receiver operative characteristic curve (AuROC) and clinical utility was determined using decision curve analysis. RESULTS: The study cohort included 1982 patients with median age 74 years, of which 136 (7%) experienced at least one adverse medication event(s). The model included: length of stay, hospital re-admission within 12 months, venous or arterial thrombosis and/or embolism, ≥ 8 medications, serum sodium < 126 mmol/L, INR > 3, anti-psychotic, antiarrhythmic and immunosuppressant medications, and history of medication allergy. Validation gave an AuROC of 0.70 (95% CI: 0.65-0.74). Decision curve analysis identified that the AIME may be clinically useful to help guide decision making in practice. CONCLUSION: We have developed a predictive model with reasonable performance. Future steps include external validation and impact evaluation.

Systematic review of machine learning models for personalised dosing of heparin.

AIM: To identify and critically appraise studies of prediction models, developed using machine learning (ML) methods, for determining the optimal dosing of unfractionated heparin (UFH). METHODS: Embase, PubMed, CINAHL, Web of Science, International Pharmaceutical Abstracts and IEEE Xplore databases were searched from inception to 31 January 2020 to identify relevant studies using key search terms synonymous with artificial intelligence or ML, 'prediction', 'dose', 'activated partial thromboplastin time (aPTT)' and 'UFH.' Studies had to have used ML methods for developing models that predicted optimal dose of UFH or target therapeutic aPTT levels in the hospital setting. The CHARMS Checklist was used to assess quality and risk of bias of included studies. RESULTS: Of 8393 retrieved abstracts, 61 underwent full text review and eight studies met inclusion criteria. Four studies described models for predicting aPTT, three studies described models predicting optimal dose of heparin during dialysis and one study described a model that used surrogate outcomes of clotting and bleeding to predict a therapeutic aPTT. Studies varied widely in reporting of study participants, feature characterisation and selection, handling of missing data, sample size calculations and the intended clinical application of the model. Only one study conducted an external validation and no studies evaluated model impacts in clinical practice. CONCLUSION: Studies of ML models for UFH dosing are few and none report a model ready for routine clinical use. Existing studies are limited by low methodological quality, inadequate reporting of study factors and absence of external validation and impact analysis.

Clinical outcome after microsurgical resection of intraventricular trigone meningiomas: a single-centre analysis of 20 years and literature overview.

BACKGROUND: Outcome and treatment-associated morbidity analysis of trigone meningioma surgery. METHODS: We retrospectively assessed 27 neurosurgically treated patients (median age 63 years, range 15-84) between 1999 and 2019. The median preoperative Karnofsky Performance Scale (KPS) was 80 (range 20-100), and the majority (78%) suffered from tumour-specific symptoms. The most frequent symptoms were aphasia (n = 6), visual field deficits (n = 5), and increased intracranial pressure (n = 5). The median tumour volume was 11.2 cm3 (range 3.9-220.5). The most common approaches were the transtemporal (n = 17) and transparietal routes (n = 5). RESULTS: At last follow-up (median follow-up 35 months, range 3-127), the median KPS was 90 (range 30-100); eleven (42%) patients had improved, nine (35%) were unchanged, six (23%) had worsened, and one was lost to follow-up. One year after surgery, 18/21 (86%) patients had retained an activity level similar or improved compared with preoperatively. No surgery-related mortality was recorded. Postoperative new neurological deficits were seen in 13 (48%) patients; eight suffered from permanent, most commonly motor deficits (n = 4), and five of transient deficits. Permanent new motor deficits improved in the majority of affected patients (3/4) over time. New deficits were more often seen for transtemporal (8/17) than transparietal approaches (1/5). Patients with postoperative permanent new deficits had a significantly worse KPS at last follow-up (p < 0.001). CONCLUSIONS: The transtemporal and transparietal approaches provide good access, but the latter might provide for a better risk profile. Patients show favourable outcome, but there is a considerable risk for new neurological deficits. This must be taken into consideration for oligosymptomatic patients.

Comparing health-related quality of life in modified Rankin Scale grades: 15D results from 323 patients with brain arteriovenous malformation and population controls.

BACKGROUND: We wanted to understand how patients with different modified Rankin Scale (mRS) grades differ regarding their health-related quality of life (HRQoL) and how this affects the interpretation and dichotomization of the grade. METHODS: In 2016, all adult patients in our brain arteriovenous malformation (AVM) database (n = 432) were asked to fill in mailed letters including a questionnaire about self-sufficiency and lifestyle and the 15D HRQoL questionnaire. The follow-up mRS was defined in 2016 using the electronic patient registry and the questionnaire data. The 15D profiles of each mRS grade were compared to those of the general population and to each other, using ANCOVA with age and sex standardization. RESULTS: Patients in mRS 0 (mean 15D score = 0.954 ± 0.060) had significantly better HRQoL than the general population (mean = 0.927 ± 0.028), p < 0.0001, whereas patients in mRS 1-4 had worse HRQoL than the general population, p < 0.0001. Patients in mRS 1 (mean = 0.844 ± 0.100) and mRS 2 (mean = 0.838 ± 0.107) had a similar HRQoL. In the recently published AVM research, the most commonly used cut points for mRS dichotomization were between mRS 1 and 2 and between mRS 2 and 3. CONCLUSIONS: Using 15D, we were able to find significant differences in the HRQoL between mRS 0 and mRS 1 AVM patients, against the recent findings on stroke patients using EQ-5D in their analyses. Although the dichotomization cut point is commonly set between mRS 1 and 2, patients in these grades had a similar HRQoL and a decreased ability to continue their premorbid lifestyle, in contrast to patients in mRS 0.

Meditation music improved the quality of suturing in an experimental bypass procedure.

BACKGROUND: Neurosurgeons are vulnerable to additional noise in their natural operating environment. Noise exposure is associated with reduced cognitive function, inability to concentrate, and nervousness. Mediation music provides an opportunity to create a calmer environment which may reduce stress during surgery. METHODS: A pilot study was performed to find a suitable task, meditation music of surgeon's choice, and operation noise and to reach a certain level of training. For the main experiment, two neurosurgeons with different microsurgical experience used real operation noise and meditation music with delta waves as mediating music. Each surgeon performed 10 training bypasses (five with noise and five with music) with 16 stitches in each bypass. The total time to complete 16 stitches, a number of unachieved movements (N.U.Ms), length of thread consumed, and distribution of the stitches were quantified from the recorded videos and compared in both groups. RESULTS: A N.U.Ms were significantly reduced from 109 ± 38 with operation room (OR) noise to 38 ± 13 (p < 0.05) with meditating music in novice surgeon. Similar results were found in the experienced surgeon performing the same task [from 29 ± 6.94 to 14 ± 3.36 (p < 0.05)]. The total time utilized for the sixteen stitches was slightly improved (not significantly) in the novice surgeon and unchanged in the experienced surgeon. However, the thread length used for 16 stitches was significantly different with OR noise in comparison to meditating music in both surgeons. The distribution stitches showed a non-significant trend toward a uniform distribution with meditation music in both surgeons. CONCLUSIONS: Meditation music of surgeon's choice is a simple method that improved quality of bypass suturing in an experimental bypass procedure.

Role of Damage Associated Molecular Pattern Molecules (DAMPs) in Aneurysmal Subarachnoid Hemorrhage (aSAH).

Aneurysmal subarachnoid hemorrhage (aSAH) represents only a small portion of all strokes, but accounts for almost half of the deaths caused by stroke worldwide. Neurosurgical clipping and endovascular coiling can successfully obliterate the bleeding aneurysms, but ensuing complications such as cerebral vasospasm, acute and chronic hydrocephalus, seizures, cortical spreading depression, delayed ischemic neurological deficits, and delayed cerebral ischemia lead to poor clinical outcomes. The mechanisms leading to these complications are complex and poorly understood. Early brain injury resulting from transient global ischemia can release molecules that may be critical to initiate and sustain inflammatory response. Hence, the events during early brain injury can influence the occurrence of delayed brain injury. Since the damage associated molecular pattern molecules (DAMPs) might be the initiators of inflammation in the pathophysiology of aSAH, so the aim of this review is to highlight their role in the context of aSAH from diagnostic, prognostic, therapeutic, and drug therapy monitoring perspectives. DAMPs represent a diverse and a heterogenous group of molecules derived from different compartments of cells upon injury. Here, we have reviewed the most important DAMPs molecules including high mobility group box-1 (HMGB1), S100B, hemoglobin and its derivatives, extracellular matrix components, IL-1α, IL-33, and mitochondrial DNA in the context of aSAH and their role in post-aSAH complications and clinical outcome after aSAH.

Timing of surgery for ruptured supratentorial arteriovenous malformations.

BACKGROUND: There are conflicting opinions regarding the optimal waiting time to perform surgery after rupture of supratentorial arteriovenous malformations (AVMs) to achieve the best possible outcome. OBJECTIVE: To analyze factors influencing outcomes for ruptured supratentorial AVMs after surgery, paying particular attention to the timing of the surgery. METHODS: We retrospectively investigated 59 patients admitted to our center between 2000 and 2014 for surgical treatment of ruptured supratentorial AVMs. We evaluated the effect of timing of surgery and other variables on the outcome at 2-4 months (early outcome), at 12 months (intermediate outcome) after surgery, and at final follow-up at the end of 2016 (late outcome). RESULTS: Age over 40 years (OR 18.4; 95% CI 1.9-172.1; p = 0.011), high Hunt and Hess grade (4 or 5) before surgery (OR 13.5; 95% CI 2.1-89.2; p = 0.007), hydrocephalus on admission (OR 12.9; 95% CI 1.8-94.4; p = 0.011), and over 400 cm3 bleeding during surgery (OR 11.5; 95% CI 1.5-86.6; p = 0.017) were associated with an unfavorable early outcome. Age over 40 years (OR 62.8; 95% CI 2.6-1524.9; p = 0.011), associated aneurysms (OR 34.7; 95% CI 1.4-829.9; p = 0.029), high Hunt and Hess grade before surgery (OR 29.2; 95% CI 2.6-332.6; p = 0.007), and over 400 cm3 bleeding during surgery (OR 35.3; 95% CI 1.7-748.7; p = 0.022) were associated with an unfavorable intermediate outcome. Associated aneurysms (OR 8.2; 95% CI 1.2-55.7; p = 0.031), high Hunt and Hess grade before surgery (OR 5.7; 95% CI 1.3-24.3; p = 0.019), and over 400 cm3 bleeding during surgery (OR 5.8; 95% CI 1.2-27.3; p = 0.027) were associated with an unfavorable outcome at last follow-up. Elapsed time between rupture and surgery did not affect early or final outcome. CONCLUSIONS: Early surgery in patients with ruptured supratentorial arteriovenous malformation is feasible strategy, with late results comparable to those achieved with delayed surgery. Many other factors than timing of surgery play significant roles in long-term outcomes for surgically treated ruptured supratentorial AVMs.

Optimal eye movement strategies: a comparison of neurosurgeons gaze patterns when using a surgical microscope.

BACKGROUND: Previous studies have consistently demonstrated gaze behaviour differences related to expertise during various surgical procedures. In micro-neurosurgery, however, there is a lack of evidence of empirically demonstrated individual differences associated with visual attention. It is unknown exactly how neurosurgeons see a stereoscopic magnified view in the context of micro-neurosurgery and what this implies for medical training. METHOD: We report on an investigation of the eye movement patterns in micro-neurosurgery using a state-of-the-art eye tracker. We studied the eye movements of nine neurosurgeons while performing cutting and suturing tasks under a surgical microscope. Eye-movement characteristics, such as fixation (focus level) and saccade (visual search pattern), were analysed. RESULTS: The results show a strong relationship between the level of microsurgical skill and the gaze pattern, whereas more expertise is associated with greater eye control, stability, and focusing in eye behaviour. For example, in the cutting task, well-trained surgeons increased their fixation durations on the operating field twice as much as the novices (expert, 848 ms; novice, 402 ms). CONCLUSIONS: Maintaining steady visual attention on the target (fixation), as well as being able to quickly make eye jumps from one target to another (saccades) are two important elements for the success of neurosurgery. The captured gaze patterns can be used to improve medical education, as part of an assessment system or in a gaze-training application.

Perimesencephalic subarachnoid hemorrhage with a positive angiographic finding: case report and review of the literature.

The vast majority of perimesencephalic subarachnoid hemorrhage cases are reported as negative-finding etiologies. Recently, high-resolution images allowed us to overcome the previous difficulty of finding the source of bleeding, which underlies the concept of a "negative finding". We discovered a venous etiology, hidden behind the tip of the basilar artery; namely, the lateral pontine vein. Here, we review the literature on perimesencephalic subarachnoid hemorrhage and on venous aneurysm. We highlight this type of aneurysm as a candidate source of perimesencephalic hemorrhage. This case may change our way of dealing with what we have termed a negative finding of subarachnoid hemorrhage.

The adverse inpatient medication event and frailty (AIME-frail) risk prediction model.

BACKGROUND: Medication harm affects between 5 and 15% of hospitalised patients, with approximately half of the harm events considered preventable through timely intervention. The Adverse Inpatient Medication Event (AIME) risk prediction model was previously developed to guide a systematic approach to patient prioritisation for targeted clinician review, but frailty was not tested as a candidate predictor variable. AIM: To evaluate the predictive performance of an updated AIME model, incorporating a measure of frailty, when applied to a new multisite cohort of hospitalised adult inpatients. METHODS: A retrospective cohort study was conducted at two tertiary Australian hospitals on patients discharged between 1st January and April 31, 2020. Data were extracted from electronic medical records (EMRs) and clinical coding databases. Medication harm was identified using ICD-10 Y-codes and confirmed by senior pharmacist review of medical records. The Hospital Frailty Risk Score (HFRS) was calculated for each patient. Logistic regression analysis was used to construct a modified AIME model. Candidate variables of the original AIME model, together with new variables including HFRS were tested. Performance of the final model was reported using area under the curve (AUC) and decision curve analysis (DCA). RESULTS: A total of 4089 patient admissions were included, with a mean age ± standard deviation (SD) of 64 years (±19 years), 2050 patients (50%) were males, and mean HFRS was 6.2 (±5.9). 184 patients (4.5%) experienced one or more medication harm events during hospitalisation. The new AIME-Frail risk model incorporated 5 of the original variables: length of stay (LOS), anti-psychotics, antiarrhythmics, immunosuppressants, and INR greater than 3, as well as 5 new variables: HFRS, anticoagulants, antibiotics, insulin, and opioid use. The AUC was 0.79 (95% CI: 0.76-0.83) which was superior to the original model (AUC = 0.70, 95% CI: 0.65-0.74) with a sensitivity of 69%, specificity of 81%, positive predictive value of 0.14 (95% CI: 0.10-0.17) and negative predictive value of 0.98 (95% CI: 0.97-0.99). The DCA identified the model as having potential clinical utility between the probability thresholds of 0.05-0.4. CONCLUSION: The inclusion of a frailty measure improved the predictive performance of the AIME model. Screening inpatients using the AIME-Frail tool could identify more patients at high-risk of medication harm who warrant timely clinician review.

Evaluating automated machine learning platforms for use in healthcare.

Objective: To describe development and application of a checklist of criteria for selecting an automated machine learning (Auto ML) platform for use in creating clinical ML models. Materials and Methods: Evaluation criteria for selecting an Auto ML platform suited to ML needs of a local health district were developed in 3 steps: (1) identification of key requirements, (2) a market scan, and (3) an assessment process with desired outcomes. Results: The final checklist comprising 21 functional and 6 non-functional criteria was applied to vendor submissions in selecting a platform for creating a ML heparin dosing model as a use case. Discussion: A team of clinicians, data scientists, and key stakeholders developed a checklist which can be adapted to ML needs of healthcare organizations, the use case providing a relevant example. Conclusion: An evaluative checklist was developed for selecting Auto ML platforms which requires validation in larger multi-site studies.

3D Exoscopes in Experimental Microanastomosis: A Comparison of Different Systems.

Background: In recent years, three-dimensional exoscopes have been increasingly applied in neurosurgery. Multiple exoscopic systems are available, all offering specific features. In this study, we assessed practical and visualization performance of four different exoscopic systems in a highly challenging microsurgical procedure, and evaluated whether these affected the quality of work. Methods: We included four different exoscopes: Olympus ORBEYE, Zeiss KINEVO, Storz VITOM, and Aesculap AEOS. With each exoscope, ten experimental bypass procedures were carried out on chicken wing vessels at a depth of 3 cm. We evaluated the quality of the anastomoses, the practical considerations for the setup of the exoscopic systems, and the visualization quality by tracking the number of unnecessary movements. Results: All included exoscopes enabled us to perform the bypass procedures with mostly adequate or excellent results. Surgically, the most pronounced difference between the exoscopes was the duration of the procedure, which was mainly due to the number of unnecessary movements. Practically, the exoscopes differ highly which is important when considering which exoscope to apply. Conclusions: This is the first study comparing different exoscope systems while performing the same challenging microsurgical procedure. We found major practical differences between the exoscopes that determine the suitability of an exoscope based on the demands and conditions of the surgical procedure. Therefore, preprocedural practical training with the exoscope is required.