Pressure-Modulated Structural and Magnetic Phase Transitions in Two-Dimensional FeTe: Tetragonal and Hexagonal Polymorphs.

Two-dimensional (2D) Fe chalcogenides with their rich structures and properties are highly desirable for revealing the torturous transition mechanism of Fe chalcogenides and exploring their potential applications in spintronics and nanoelectronics. Hydrostatic pressure can effectively stimulate phase transitions between various ordered states, allowing one to successfully plot a phase diagram for a given material. Herein, the structural evolution and transport characteristics of 2D FeTe were systematically investigated under extreme conditions by comparing two distinct symmetries, i.e., tetragonal (t) and hexagonal (h) FeTe. We found that t-FeTe presented a pressure-induced transition from an antiferromagnetic state to a ferromagnetic state at ∼3 GPa, corresponding to the tetragonal collapse of the layered structure. Contrarily, the ferromagnetic order of h-FeTe was retained up to 15 GPa, which was evidently confirmed by electrical transport and Raman measurements. Furthermore, T-P phase diagrams for t-FeTe and h-FeTe were mapped under delicate critical conditions. Our results can provide a unique platform to elaborate the extraordinary properties of Fe chalcogenides and further develop their applications.

Experimental Observation of Highly Anisotropic Elastic Properties of Two-Dimensional Black Arsenic.

Anisotropic two-dimensional layered materials with low-symmetry lattices have attracted increasing attention due to their unique orientation-dependent mechanical properties. Black arsenic (b-As), with the puckered structure, exhibits extreme in-plane anisotropy in optical, electrical, and thermal properties. However, experimental research on mechanical properties of b-As is very rare, although theoretical calculations predicted the exotic elastic properties of b-As, such as the anisotropic Young's modulus and negative Poisson's ratio. Herein, experimental observations on highly anisotropic elastic properties of b-As were demonstrated using our developed in situ tensile straining setup based on the effective microelectromechanical system. The cyclic and repeatable load-displacement curves proved that Young's modulus along the zigzag direction was ∼1.6 times greater than that along the armchair direction, while the anisotropic ratio of ultimate strain reached ∼2.5, attributed to the hinge structure in the armchair direction. This study could provide significant insights into the design of novel anisotropic materials and explore their potential applications in nanomechanics and nanodevices.

Phase-Modulated Elastic Properties of 2D Magnetic FeTe: Hexagonal and Tetragonal Polymorphs.

2D layered magnets, such as iron chalcogenides, have emerged these years as a new family of unconventional superconductors and provided the key insights to understand the phonon-electron interaction and pairing mechanism. Their mechanical properties are of strategic importance for the potential applications in spintronics and optoelectronics. However, there is still a lack of efficient approach to tune the elastic modulus despite the extensive studies. Herein, the modulated elastic modulus of 2D magnetic FeTe and its thickness-dependence is reported via phase engineering. The grown 2D FeTe by chemical vapor deposition can present various polymorphs, that is tetragonal FeTe (t-FeTe, antiferromagnetic) and hexagonal FeTe (h-FeTe, ferromagnetic). The measured Young's modulus of t-FeTe by nanoindentation method shows an obvious thickness-dependence, from 290.9 ± 9.2 to 113.0 ± 8.7 GPa when the thicknesses increased from 13.2 to 42.5 nm, respectively. In comparison, the elastic modulus of h-FeTe remains unchanged. These results can shed light on the efficient modulation of mechanical properties of 2D magnetic materials and pave the avenues for their practical applications in nanodevices.

Self-powered vision electronic-skin basing on piezo-photodetecting Ppy/PVDF pixel-patterned matrix for mimicking vision.

The development of multifunctional electronic-skin that establishes human-machine interfaces, enhances perception abilities or has other distinct biomedical applications is the key to the realization of artificial intelligence. In this paper, a new self-powered (battery-free) flexible vision electronic-skin has been realized from pixel-patterned matrix of piezo-photodetecting PVDF/Ppy film. The electronic-skin under applied deformation can actively output piezoelectric voltage, and the outputting signal can be significantly influenced by UV illumination. The piezoelectric output can act as both the photodetecting signal and electricity power. The reliability is demonstrated over 200 light on-off cycles. The sensing unit matrix of 6 × 6 pixels on the electronic-skin can realize image recognition through mapping multi-point UV stimuli. This self-powered vision electronic-skin that simply mimics human retina may have potential application in vision substitution.

Thermodynamic Origins of Structural Metastability in Two-Dimensional Black Arsenic.

Two-dimensional (2D) materials have aroused considerable research interest owing to their potential applications in nanoelectronics and optoelectronics. Thermodynamic stability of 2D structures inevitably affects the performance and power consumption of the fabricated nanodevices. Black arsenic (b-As), as a cousin of black phosphorus, has presented extremely high anisotropy in physical properties. However, systematic research on structural stability of b-As is still lacking. Herein, we demonstrated the detailed analysis on structural metastability of the natural b-As, and determined its existence conditions in terms of two essential thermodynamic variables, hydrostatic pressure and temperature. Our results confirmed that b-As can survive only below 0.7 GPa, and then irreversibly transforms to gray arsenic, consistent with our theoretical calculations. Furthermore, a thermal annealing strategy was developed to precisely control the thickness of the b-As flake, and it sublimates at 300 °C. These results could pave the way for 2D b-As in many promising applications.

Ultralow Tip-Force Driven Sizable-Area Domain Manipulation through Transverse Flexoelectricity.

Deterministic control of ferroelectric domain is critical in the ferroelectric functional electronics. Ferroelectric polarization can be manipulated mechanically with a nano-tip through flexoelectricity. However, it usually occurs in a very localized area in ultrathin films, with possible permanent surface damage caused by a large tip-force. Here it is demonstrated that the deliberate engineering of transverse flexoelectricity offers a powerful tool for improving the mechanical domain switching. Sizable-area domain switching under an ultralow tip-force can be realized in suspended van der Waals ferroelectrics with the surface intact, due to the enhanced transverse flexoelectric field. The film thickness range for domain switching in suspended ferroelectrics is significantly improved by an order of magnitude to hundreds of nanometers, being far beyond the limited range of the substrate-supported ones. The experimental results and phase-field simulations further reveal the crucial role of the transverse flexoelectricity in the domain manipulation. This large-scale mechanical manipulation of ferroelectric domain provides opportunities for the flexoelectricity-based domain controls in emerging low-dimensional ferroelectrics and related devices.

Nonintrusive Monitoring of Mental Fatigue Status Using Epidermal Electronic Systems and Machine-Learning Algorithms.

Mental fatigue, characterized by subjective feelings of "tiredness" and "lack of energy", can degrade individual performance in a variety of situations, for example, in motor vehicle driving or while performing surgery. Thus, a method for nonintrusive monitoring of mental fatigue status is urgently needed. Recent research shows that physiological signal-based fatigue-classification methods using wearable electronics can be sufficiently accurate; by contrast, rigid, bulky devices constrain the behavior of those wearing them, potentially interfering with test signals. Recently, wearable electronics, such as epidermal electronics systems (EES) and electronic tattoos (E-tattoos), have been developed to meet the requirements for the comfortable measurement of various physiological signals. However, comfortable, effective, and nonintrusive monitoring of mental fatigue levels remains to be fulfilled. In this work, an EES is established to simultaneously detect multiple physiological signals in a comfortable and nonintrusive way. Machine-learning algorithms are employed to determine the mental fatigue levels and a predictive accuracy of up to 89% is achieved based on six different kinds of physiological features using decision tree algorithms. Furthermore, EES with the trained predictive model are applied to monitor in situ human mental fatigue levels when doing several routine research jobs, as well as the effect of relaxation methods in relieving fatigue.

A Self-Powered Breath Analyzer Based on PANI/PVDF Piezo-Gas-Sensing Arrays for Potential Diagnostics Application.

The increasing morbidity of internal diseases poses serious threats to human health and quality of life. Exhaled breath analysis is a noninvasive and convenient diagnostic method to improve the cure rate of patients. In this study, a self-powered breath analyzer based on polyaniline/polyvinylidene fluoride (PANI/PVDF) piezo-gas-sensing arrays has been developed for potential detection of several internal diseases. The device works by converting exhaled breath energy into piezoelectric gas-sensing signals without any external power sources. The five sensing units in the device have different sensitivities to various gas markers with concentrations ranging from 0 to 600 ppm. The working principle can be attributed to the coupling of the in-pipe gas-flow-induced piezoelectric effect of PVDF and gas-sensing properties of PANI electrodes. In addition, the device demonstrates its use as an ethanol analyzer to roughly mimic fatty liver diagnosis. This new approach can be applied to fabricating new exhaled breath analyzers and promoting the development of self-powered systems.

A self-powered brain-linked biosensing electronic-skin for actively tasting beverage and its potential application in artificial gustation.

A new self-powered brain-linked biosensing electronic-skin (e-skin) for detecting pH value and alcoholicity of beverages has been realized based on polydimethysiloxane/polypyrrole (PDMS/Ppy) nanostructures. This e-skin (linking brain and transmitting signal to the specific encephalic region) can work as an artificial gustation system for gustatory perception substitution without an external electricity source. The sensing units on the e-skin can efficiently convert mechanical energy (human motion) into triboelectric impulse. The triboelectric output can be influenced by pH value and alcohol concentration in common beverages (acidic, alkaline or alcoholic drinks), which can be treated as the bio-chemical sensing signal. The bio-chemical sensing behavior arises from the triboelectrification/bio-chemical-sensing coupling effect. The biosensing e-skin is simply linked to the brain of a mouse at the primary motor cortex area, and the inputting signal can take part in the mouse perception, thus realizing behavior interventions, e.g., shaking of legs. This study provides a novel approach for developing artificial gustation e-skin and self-powered brain-machine interaction system with low cost.

Self-powered implantable electronic-skin for in situ analysis of urea/uric-acid in body fluids and the potential applications in real-time kidney-disease diagnosis.

As the concentration of different biomarkers in human body fluids are an important parameter of chronic disease, wearable biosensors for in situ analysis of body fluids with high sensitivity, real-time detection, flexibility and biocompatibility have significant potential therapeutic applications. In this paper, a flexible self-powered implantable electronic-skin (e-skin) for in situ body fluids analysis (urea/uric-acid) as a real-time kidney-disease diagnoser has been proposed based on the piezo-enzymatic-reaction coupling process of ZnO nanowire arrays. It can convert the mechanical energy of body movements into a piezoelectric impulse, and the outputting piezoelectric signal contains the urea/uric-acid concentration information in body fluids. This piezoelectric-biosensing process does not need an external electricity supply or battery. The e-skin was implanted under the abdominal skin of a mouse and provided in situ analysis of the kidney-disease parameters. These results provide a new approach for developing a self-powered in situ body fluids-analysis technique for chronic-disease diagnosis.

A Self-Powered Wearable Noninvasive Electronic-Skin for Perspiration Analysis Based on Piezo-Biosensing Unit Matrix of Enzyme/ZnO Nanoarrays.

The emerging multifunctional flexible electronic-skin for establishing body-electric interaction can enable real-time monitoring of personal health status as a new personalized medicine technique. A key difficulty in the device design is the flexible power supply. Here a self-powered wearable noninvasive electronic-skin for perspiration analysis has been realized on the basis of a piezo-biosensing unit matrix of enzyme/ZnO nanoarrays. The electronic-skin can detect lactate, glucose, uric acid, and urea in the perspiration, and no outside electrical power supply or battery is used in the biosensing process. The piezoelectric impulse of the piezo-biosensing units serves as the power supply and the data biosensor. The working mechanism can be ascribed to the piezoelectric-enzymatic-reaction coupling effect of enzyme/ZnO nanowires. The electronic-skin can real-time/continuously monitor the physiological state of a runner through analyzing the perspiration on his skin. This approach can promote the development of a new-type of body electric and self-powered biosensing electronic-skin.