Diagnosis of warm dense conditions in foil targets heated by intense femtosecond laser pulses using Kα imaging spectroscopy.

Warm dense conditions in titanium foils irradiated with intense femtosecond laser pulses are diagnosed using an x-ray imaging spectroscopy technique. The line shapes of radially resolved titanium Kα spectra are measured with a toroidally bent GaAs crystal and an x-ray charge-coupled device. Measured spectra are compared with the K-shell emissions modeled using an atomic kinetics - spectroscopy simulation code. Kα line shapes are strongly affected by warm (5-40 eV) bulk electron temperatures and imply multiple temperature distributions in the targets. The spatial distribution of temperature is dependent on the target thickness, and a thin target shows an advantage to generate uniform warm dense conditions in a large area.

Creation and diagnosis of a solid-density plasma with an X-ray free-electron laser.

Matter with a high energy density (>10(5) joules per cm(3)) is prevalent throughout the Universe, being present in all types of stars and towards the centre of the giant planets; it is also relevant for inertial confinement fusion. Its thermodynamic and transport properties are challenging to measure, requiring the creation of sufficiently long-lived samples at homogeneous temperatures and densities. With the advent of the Linac Coherent Light Source (LCLS) X-ray laser, high-intensity radiation (>10(17) watts per cm(2), previously the domain of optical lasers) can be produced at X-ray wavelengths. The interaction of single atoms with such intense X-rays has recently been investigated. An understanding of the contrasting case of intense X-ray interaction with dense systems is important from a fundamental viewpoint and for applications. Here we report the experimental creation of a solid-density plasma at temperatures in excess of 10(6) kelvin on inertial-confinement timescales using an X-ray free-electron laser. We discuss the pertinent physics of the intense X-ray-matter interactions, and illustrate the importance of electron-ion collisions. Detailed simulations of the interaction process conducted with a radiative-collisional code show good qualitative agreement with the experimental results. We obtain insights into the evolution of the charge state distribution of the system, the electron density and temperature, and the timescales of collisional processes. Our results should inform future high-intensity X-ray experiments involving dense samples, such as X-ray diffractive imaging of biological systems, material science investigations, and the study of matter in extreme conditions.

Observation of Reverse Saturable Absorption of an X-ray Laser.

A nonlinear absorber in which the excited state absorption is larger than the ground state can undergo a process called reverse saturable absorption. It is a well-known phenomenon in laser physics in the optical regime, but is more difficult to generate in the x-ray regime, where fast nonradiative core electron transitions typically dominate the population kinetics during light matter interactions. Here, we report the first observation of decreasing x-ray transmission in a solid target pumped by intense x-ray free electron laser pulses. The measurement has been made below the K-absorption edge of aluminum, and the x-ray intensity ranges are 10^{16} -10^{17} W/cm^{2}. It has been confirmed by collisional radiative population kinetic calculations, underscoring the fast spectral modulation of the x-ray pulses and charge states relevant to the absorption and transmission of x-ray photons. The processes shown through detailed simulations are consistent with reverse saturable absorption, which would be the first observation of this phenomena in the x-ray regime. These light matter interactions provide a unique opportunity to investigate optical transport properties in the extreme state of matters, as well as affording the potential to regulate ultrafast x-ray free-electron laser pulses.

Resonant Kα spectroscopy of solid-density aluminum plasmas.

The x-ray intensities made available by x-ray free electron lasers (FEL) open up new x-ray matter interaction channels not accessible with previous sources. We report here on the resonant generation of Kα emission, that is to say the production of copious Kα radiation by tuning the x-ray FEL pulse to photon energies below that of the K edge of a solid aluminum sample. The sequential absorption of multiple photons in the same atom during the 80 fs pulse, with photons creating L-shell holes and then one resonantly exciting a K-shell electron into one of these holes, opens up a channel for the Kα production, as well as the absorption of further photons. We demonstrate rich spectra of such channels, and investigate the emission produced by tuning the FEL energy to the K-L transitions of those highly charged ions that have transition energies below the K edge of the cold material. The spectra are sensitive to x-ray intensity dependent opacity effects, with ions containing L-shell holes readily reabsorbing the Kα radiation.

Electronic structure of warm dense copper studied by ultrafast x-ray absorption spectroscopy.

We use time-resolved x-ray absorption spectroscopy to investigate the unoccupied electronic density of states of warm dense copper that is produced isochorically through the absorption of an ultrafast optical pulse. The temperature of the superheated electron-hole plasma, which ranges from 4000 to 10 000 K, was determined by comparing the measured x-ray absorption spectrum with a simulation. The electronic structure of warm dense copper is adequately described with the high temperature electronic density of state calculated by the density functional theory. The dynamics of the electron temperature is consistent with a two-temperature model, while a temperature-dependent electron-phonon coupling parameter is necessary.

Measuring the structure and equation of state of polyethylene terephthalate at megabar pressures.

We present structure and equation of state (EOS) measurements of biaxially orientated polyethylene terephthalate (PET, [Formula: see text], also called mylar) shock-compressed to ([Formula: see text]) GPa and ([Formula: see text]) K using in situ X-ray diffraction, Doppler velocimetry, and optical pyrometry. Comparing to density functional theory molecular dynamics (DFT-MD) simulations, we find a highly correlated liquid at conditions differing from predictions by some equations of state tables, which underlines the influence of complex chemical interactions in this regime. EOS calculations from ab initio DFT-MD simulations and shock Hugoniot measurements of density, pressure and temperature confirm the discrepancy to these tables and present an experimentally benchmarked correction to the description of PET as an exemplary material to represent the mixture of light elements at planetary interior conditions.

Electronic structure of an XUV photogenerated solid-density aluminum plasma.

By use of high intensity XUV radiation from the FLASH free-electron laser at DESY, we have created highly excited exotic states of matter in solid-density aluminum samples. The XUV intensity is sufficiently high to excite an inner-shell electron from a large fraction of the atoms in the focal region. We show that soft-x-ray emission spectroscopy measurements reveal the electronic temperature and density of this highly excited system immediately after the excitation pulse, with detailed calculations of the electronic structure, based on finite-temperature density functional theory, in good agreement with the experimental results.

Soft x-ray free electron laser microfocus for exploring matter under extreme conditions.

We have focused a beam (BL3) of FLASH (Free-electron LASer in Hamburg: lambda = 13.5 nm, pulse length 15 fs, pulse energy 10-40 microJ, 5 Hz) using a fine polished off-axis parabola having a focal length of 270 mm and coated with a Mo/Si multilayer with an initial reflectivity of 67% at 13.5 nm. The OAP was mounted and aligned with a picomotor controlled six-axis gimbal. Beam imprints on poly(methyl methacrylate) - PMMA were used to measure focus and the focused beam was used to create isochoric heating of various slab targets. Results show the focal spot has a diameter of < or =1 microm. Observations were correlated with simulations of best focus to provide further relevant information.

Evidence for Crystalline Structure in Dynamically-Compressed Polyethylene up to 200 GPa.

We investigated the high-pressure behavior of polyethylene (CH2) by probing dynamically-compressed samples with X-ray diffraction. At pressures up to 200 GPa, comparable to those present inside icy giant planets (Uranus, Neptune), shock-compressed polyethylene retains a polymer crystal structure, from which we infer the presence of significant covalent bonding. The A2/m structure which we observe has previously been seen at significantly lower pressures, and the equation of state measured agrees with our findings. This result appears to contrast with recent data from shock-compressed polystyrene (CH) at higher temperatures, which demonstrated demixing and recrystallization into a diamond lattice, implying the breaking of the original chemical bonds. As such chemical processes have significant implications for the structure and energy transfer within ice giants, our results highlight the need for a deeper understanding of the chemistry of high pressure hydrocarbons, and the importance of better constraining planetary temperature profiles.

Measurement of Electron-Ion Relaxation in Warm Dense Copper.

Experimental investigation of electron-ion coupling and electron heat capacity of copper in warm and dense states are presented. From time-resolved x-ray absorption spectroscopy, the temporal evolution of electron temperature is obtained for non-equilibrium warm dense copper heated by an intense femtosecond laser pulse. Electron heat capacity and electron-ion coupling are inferred from the initial electron temperature and its decrease over 10 ps. Data are compared with various theoretical models.

Investigation of femtosecond collisional ionization rates in a solid-density aluminium plasma.

The rate at which atoms and ions within a plasma are further ionized by collisions with the free electrons is a fundamental parameter that dictates the dynamics of plasma systems at intermediate and high densities. While collision rates are well known experimentally in a few dilute systems, similar measurements for nonideal plasmas at densities approaching or exceeding those of solids remain elusive. Here we describe a spectroscopic method to study collision rates in solid-density aluminium plasmas created and diagnosed using the Linac Coherent light Source free-electron X-ray laser, tuned to specific interaction pathways around the absorption edges of ionic charge states. We estimate the rate of collisional ionization in solid-density aluminium plasmas at temperatures ~30 eV to be several times higher than that predicted by standard semiempirical models.

Towards simultaneous measurements of electronic and structural properties in ultra-fast x-ray free electron laser absorption spectroscopy experiments.

The rapidly growing ultrafast science with X-ray lasers unveils atomic scale processes with unprecedented time resolution bringing the so called "molecular movie" within reach. X-ray absorption spectroscopy is one of the most powerful x-ray techniques providing both local atomic order and electronic structure when coupled with ad-hoc theory. Collecting absorption spectra within few x-ray pulses is possible only in a dispersive setup. We demonstrate ultrafast time-resolved measurements of the LIII-edge x-ray absorption near-edge spectra of irreversibly laser excited Molybdenum using an average of only few x-ray pulses with a signal to noise ratio limited only by the saturation level of the detector. The simplicity of the experimental set-up makes this technique versatile and applicable for a wide range of pump-probe experiments, particularly in the case of non-reversible processes.

Saturated ablation in metal hydrides and acceleration of protons and deuterons to keV energies with a soft-x-ray laser.

Studies of materials under extreme conditions have relevance to a broad area of research, including planetary physics, fusion research, materials science, and structural biology with x-ray lasers. We study such extreme conditions and experimentally probe the interaction between ultrashort soft x-ray pulses and solid targets (metals and their deuterides) at the FLASH free-electron laser where power densities exceeding 10(17) W/cm(2) were reached. Time-of-flight ion spectrometry and crater analysis were used to characterize the interaction. The results show the onset of saturation in the ablation process at power densities above 10(16) W/cm(2). This effect can be linked to a transiently induced x-ray transparency in the solid by the femtosecond x-ray pulse at high power densities. The measured kinetic energies of protons and deuterons ejected from the surface reach several keV and concur with predictions from plasma-expansion models. Simulations of the interactions were performed with a nonlocal thermodynamic equilibrium code with radiation transfer. These calculations return critical depths similar to the observed crater depths and capture the transient surface transparency at higher power densities.

Time-resolved measurements of the structure of water at constant density.

Dynamical changes in the structure factor of liquid water, S(Q,t), are measured using time-resolved x-ray diffraction techniques with 100 ps resolution. On short time scales following femtosecond optical excitation, we observe temperature-induced changes associated with rearrangements of the hydrogen-bonded structure at constant volume, before the system has had time to expand. We invert this data to extract transient changes in the pair correlation function associated with isochoric heating effects, and interpret these in terms of a decrease in the local tetrahedral ordering.

Bonding in liquid carbon studied by time-resolved x-ray absorption spectroscopy.

Even the most basic properties of liquid carbon have long been debated due to the challenge of studying the material at the required high temperature and pressure. Liquid carbon is volatile and thus inherently transient in an unconstrained environment. In this paper we use a new technique of picosecond time-resolved x-ray absorption spectroscopy to study the bonding of liquid carbon at densities near that of the solid. As the density of the liquid increases, we see a change from predominantly sp-bonded atomic sites to a mixture of sp, sp2, and sp3 sites and compare these observations with molecular dynamics simulations.

Band-selective measurements of electron dynamics in VO2 using femtosecond near-edge x-ray absorption.

We report on the first demonstration of femtosecond x-ray absorption spectroscopy, made uniquely possible by the use of broadly tunable bending-magnet radiation from "laser-sliced" electron bunches within a synchrotron storage ring. We measure the femtosecond electronic rearrangements that occur during the photoinduced insulator-metal phase transition in VO2. Symmetry- and element-specific x-ray absorption from V2p and O1s core levels (near 500 eV) separately measures the filling dynamics of differently hybridized V3d-O2p electronic bands near the Fermi level.

Construction and use of catheter-manometer systems.

The accuracy of invasive arterial blood pressure monitoring is dependent on an adequate damped natural frequency (DNF) and damping factor (DF) of the system. Several factors influencing the DNF and DF were investigated to determine requirements for optimal design of catheter-manometer systems. The frequency sweep method was used in a specially constructed chamber that included linearizing and compensation circuitry. The DNF of isolated 20-gauge cannulae varied from 35.1 to 47.7 Hz. The DNF of 24-gauge cannulae varied from 27.7 to 44.3 Hz. An arterial cannula was found to require a DNF above 40 Hz to prevent the DNF from decreasing to below 25 Hz with the addition of arterial pressure tubing. Arterial pressure tubings exceeding 300 mm in length had DNF values that were unacceptably low even before the addition of arterial cannulae (e.g., the DNF was 23.8 Hz for a 900-mm tubing length, 19.8 Hz for 1,000-mm length, and ranged from 12.9 to 21.4 Hz for 1,200-mm lengths). The 3-way stopcocks and continuous flush devices further decreased the DNF, especially when the diameters were not matched. The percentage decrease caused by 3-way stopcocks and flush devices ranged between 19.5 and 40.8% for 300-mm length tubings and between 2.3 and 25.8% for tubings of 1,200-mm lengths. The radius ratio (outside diameter divided by inside diameter) is introduced as a new method to express the stiffness of arterial pressure tubing.(ABSTRACT TRUNCATED AT 250 WORDS)

A Microprocessor Controlled Potentiostat for Electrochemical Measurements.

A system, utilizing a microprocessor, intended for the control and unattended operation of a standard laboratory potentiostat is described. The system consists of a central processing unit, 16 kilobytes of random access memory, peripheral interfacing, a timer and digital to analog and analog to digital converters. It allows flexible operation of the potentiostat by programming of the central processor.

Deep ultraviolet microscope.

A visible-light microscope has been modified to obtain deep UV (190-350-nm) images using reflected illumination. Potential advantages of deep UV microscopy include better resolution, depth of focus, and contrast for certain materials and fewer artifacts when viewing multilayered structures. These advantages are especially useful when viewing organic or semiconducting materials that are transparent or colored when viewed with visible light but are completely opaque when viewed using deep UV wavelengths. The hardware and optics of this microscope are described, and several uses are proposed for integrated circuit manufacture.

Coherent control of phonons probed by time-resolved x-ray diffraction.

Time-resolved x-ray diffraction with picosecond temporal resolution is used to probe the product state of a coherent control experiment in which a single acoustic mode in a bulk semiconductor is driven to large amplitude or canceled out. It is demonstrated that by shaping ultrafast acoustic pulses one can coherently control the x-ray diffraction efficiency of a crystal on the time scale of a vibrational period, with application to coherent switching of x-ray beams.