Community Composition Determines Activity of Antibiotics against Multispecies Biofilms.

In young cystic fibrosis (CF) patients, Staphylococcus aureus is typically the most prevalent organism, while in adults, Pseudomonas aeruginosa is the major pathogen. More recently, it was observed that also Streptococcus anginosus plays an important role in exacerbations of respiratory symptoms. These species are often coisolated from CF lungs, yet little is known about whether antibiotic killing of one species is influenced by the presence of others. In the present study, we compared the activities of various antibiotics against S. anginosus, S. aureus, and P. aeruginosa when grown in monospecies biofilms with the activity observed in a multispecies biofilm. Our results show that differences in antibiotic activity against species grown in mono- and multispecies biofilms are species and antibiotic dependent. Fewer S. anginosus cells are killed by antibiotics that interfere with cell wall synthesis (amoxicillin plus sulbactam, cefepime, imipenem, meropenem, and vancomycin) in the presence of S. aureus and P. aeruginosa, while for ciprofloxacin, levofloxacin, and tobramycin, no difference was observed. In addition, we observed that the cell-free supernatant of S. aureus, but not that of P. aeruginosa biofilms, also caused this decrease in killing. Overall, S. aureus was more affected by antibiotic treatment in a multispecies biofilm, while for P. aeruginosa, no differences were observed between growth in mono- or multispecies biofilms. The results of the present study suggest that it is important to take the community composition into account when evaluating the effect of antimicrobial treatments against certain species in mixed biofilms.

The viscosity-enhancing effect of carob bean gum and sodium carboxymethylcellulose when added to infant formula.

Despite limited supporting evidence, the practice of thickening breast milk or infant formula with commercially available thickening agents is prevalent. This study explored the viscosity-enhancing impact of carob bean gum (CBG) and sodium carboxymethylcellulose (NaCMC) when added to infant formula at various concentrations and for different thickening durations. The findings indicate that thickening leads to an exponential increase in milk viscosity, from 25% of the recommended dosage onward. This suggests that minor adjustments in dosage can significantly impact formula thickness, underscoring the importance of accurately dosing and preparing infant milk. The considerable variability in viscosity also emphasizes the need for thoughtful selection of teat size, considering the energy expenditure of the sucking infant. When using 50% of the recommended CBG dose or 25% of NaCMC, the resulting viscosity matches that of a commercially available casein-based formula containing CBG for anti-regurgitation. In the case of CBG, a viscosity plateau is only reached after 30 min. Therefore, educating parents on the correct handling and preparation steps for CBG-thickened infant milk is crucial, including a 30-min waiting period to achieve the intended thickening effect.

In Vitro Investigation into the Effect of Cryopreservation on the Mechanical Characteristics of Dental Hard Tissues.

Previous research has reported on hidden damage within the dentin introduced by cryopreservation, but the effect on the mechanical properties of the hard tissues at tooth level remains unclear. The main objective of this study is to investigate the effect of cryopreservation on the mechanical properties of teeth. A matched sample of 234 premolars of 117 children (9 ≤ age ≤ 16 years), bilaterally extracted for orthodontic reasons, were included. For each child, one tooth was randomly allocated to the cryopreservation group and the contralateral tooth was assigned to the control group. Static compression tests were performed to determine load to failure, stiffness, and toughness. In a subgroup of 20 teeth, a cyclic preloading or chewing simulation was performed. Additionally, the fracture mode was determined, and the microstructure of the fractured surfaces was examined using a scanning electron microscope (SEM). Linear mixed model analyses could not detect a statistical difference in the mean load to failure (p = 0.549), mean toughness (p = 0.968), or mean stiffness (p = 0.150) between cryopreserved and non-cryopreserved teeth. No significant difference in load to failure after cyclic preloading was detected between groups (p = 0.734). SEM analysis revealed comparable fracture characteristics between groups. It is concluded that cryopreservation does not affect the mean load to failure, stiffness, or toughness of teeth, indicating that hidden damage in the dentin is not critical at tooth level.

Influence of Print Settings on the Critical Quality Attributes of Extrusion-Based 3D-Printed Caplets: A Quality-by-Design Approach.

Extrusion-based 3D-printing is an easy-to-use, cheap manufacturing technique that could be used to produce tailored precision medicines. The technique has an almost unlimited versatility since a multitude of print parameters can easily be adapted. Unfortunately, little is known of the effect of these print parameters on the critical quality attributes of the resulting printlets. In this study, practical guidelines and means to adapt certain parameters in order to achieve the desired outcome (e.g., acceptable visual quality and flexible dosing) are stipulated for medical 3D-printing using a design-of-experiments approach. The current study aims at elucidating the effect of five print parameters (infill, overlap, number of shells, layer height and layer pattern) on the mechanical properties, dimensions, weight, porosity and dissolution characteristics of a fixed-size caplet consisting of Eudragit EPO (69.3%), Polyox WSR N10 (29.7%) and zolpidem hemitartrate (1%). In terms of the mechanical properties, 3D-printed caplets possessed anisotropy where the vertical compression strength and Brinell hardness exceeded the diametral strength. In general, all 3D-printed caplets possessed acceptable mechanical strength except for a small region of the knowledge space. Dimensional analysis revealed small, statistical significant differences between different runs, although the clinical relevance of this variation is likely negligible. The weight or dose of a caplet can be varied mainly using the infill and overlap and, to a lesser extent, via the layer height and number of shells. The impact on porosity was complicated as this was influenced by many factors and their interactions. Infill was the only statistically relevant factor influencing the dissolution rate of the current formulation. This study unravels the importance of the print parameter overlap, which is a regularly neglected parameter. We also discovered that small dose variations while maintaining the same dissolution profile were possible via modifying the overlap or number of shells. However, large dose variations without affecting the dissolution behaviour could only be accomplished by size modifications of the printlet.

Development of a 3D-Printed Dosing Platform to Aid in Zolpidem Withdrawal Therapy.

The long-term use of benzodiazepine receptor agonists (BZRAs) is associated with multiple side effects, such as increased sedation, hangover or an elevated risk of dependency and abuse. Unfortunately, the long-term use of BZRAs is reaching worrying intake rates, and therefore, the need for action is high. It was demonstrated already that the overall willingness of patients for deprescription increased when a slow dose reduction scheme with the possibility for dose increase, if needed, is employed. The current study aims to develop a flexible dosing platform of zolpidem hemitartrate (ZHT) to facilitate such withdrawal therapy. As this is the first report on the extrusion and 3D printing of ZHT, its thermal behaviour and sensitivity towards photolytic degradation was characterised. It was shown that ZHT possesses multiple polymorphs and was especially prone to oxidative photolysis. Next, a variety of immediate release polymers (Eudragit EPO, Kollidon VA64, Kollidon 12PF and Soluplus) were blended and extruded with Polyox WSR N10 to investigate their feedability and printability by mechanical and rheological analysis. The addition of PEO was shown to enable printing of these brittle pharmaceutical polymers, although the processing temperature was deemed critical to avoid surface defects on the resulting filaments. An EPO(70)PEO(30) system was selected based on its suitable mechanical properties and low hygroscopicity favoring ZHT stability. The matrix was blended with 1% or 10% API. The effect of certain printing parameters (caplet size, nozzle diameter, % overlap) on dissolution behaviour and caplet weight/dimensions/quality was assessed. A flexible dosing platform capable of delivering <1 mg and up to 10 mg of ZHT was created. Either caplet modification (incorporation of channels) or disintegrant addition (Primojel, Explotab, Ac-Di-Sol, Primellose and Polyplasdone-XL) failed to achieve an immediate release profile. This study provides the first report of a 3D-printed flexible dosing platform containing ZHT to aid in withdrawal therapy.