RESUMO
Zero-dimensional (0D) organic metal halides comprising heterogeneous metal cations in single phase can achieve multiple luminous emissions enabling them toward multifunctional light-emitting applications. Herein, A novel single crystal of (C8H20N)4SbMnCl9 containing two luminescent centers of [SbCl5]2- pentahedrons and [MnCl4]2- tetrahedrons is reported. The large distance between Sb-Sb, Mn-Mn, and Sb-Mn as well as theory calculation indicate negligible interaction between individual centers, thus endowing (C8H20N)4SbMnCl9 with excitation-dependable and efficient luminescence. Under near-UV excitation, only orange emission originates from self-trapped excitons recombination in [SbCl5]2- pentahedron occurs with photoluminescence quantum yield (PLQY) of 91.5%. Under blue-light excitation, only green emission originating from 4T1-6A1 transition of Mn2+ in [MnCl4]2- tetrahedrons occurs with PLQY of 66.8%. Interestingly, upon X-ray illumination, both emissions can be fully achieved due to the high-energy photon absorption. Consequently, (C8H20N)4SbMnCl9 is employed as phosphors to fabricate white light-emitting diodes optically pumped by n-UV chip and blue-chip thanks to its excitation-dependable property. Moreover, it also shows promising performance as X-ray scintillator with low detection limit of 60.79 nGyair S-1, steady-state light yield ≈54% of commerical scintillaotr LuAG:Ce, high resolution of 13.5 lp mm-1 for X-ray imaging. This work presents a new structural design to fabricate 0D hybrids with multicolor emissions.
RESUMO
Hyperosmotic stress tolerance is crucial for Saccharomyces cerevisiae in producing value-added products from renewable feedstock. The limited understanding of its tolerance mechanism has impeded the application of these microbial cell factories. Previous studies have shown that Med3 plays a role in hyperosmotic stress in S. cerevisiae. However, the specific function of Med3 in hyperosmotic stress tolerance remains unclear. In this study, we showed that the deletion of the mediator Med3 impairs S. cerevisiae growth under hyperosmotic stress. Phenotypic analyses and yeast two-hybrid assays revealed that Med3 interacts with the transcription factor Stb5 to regulate the expression of the genes gnd1 and ald6, which are involved in NADPH production under hyperosmotic stress conditions. The deletion of med3 resulted in a decrease in intracellular NADPH content, leading to increased oxidative stress and elevated levels of intracellular reactive oxygen species under hyperosmotic stress, thereby impacting bud formation. These findings highlight the significant role of Med3 as a regulator in maintaining NADPH generation and redox homeostasis in S. cerevisiae during hyperosmotic stress.IMPORTANCEHyperosmotic stress tolerance in the host strain is a significant challenge for fermentation performance in industrial production. In this study, we showed that the S. cerevisiae mediator Med3 is essential for yeast growth under hyperosmotic conditions. Med3 interacts with the transcription factor Stb5 to regulate the expression of genes involved in the NADPH-generation system during hyperosmotic stress. Adequate NADPH ensures the timely removal of excess reactive oxygen species and supports bud formation under these conditions. This work highlights the crucial role of Med3 as a regulator in maintaining NADPH generation and redox homeostasis in S. cerevisiae during hyperosmotic stress.
Assuntos
NADP , Pressão Osmótica , Proteínas de Saccharomyces cerevisiae , Saccharomyces cerevisiae , Saccharomyces cerevisiae/genética , Saccharomyces cerevisiae/metabolismo , Saccharomyces cerevisiae/crescimento & desenvolvimento , Proteínas de Saccharomyces cerevisiae/genética , Proteínas de Saccharomyces cerevisiae/metabolismo , NADP/metabolismo , Fatores de Transcrição/metabolismo , Fatores de Transcrição/genética , Regulação Fúngica da Expressão Gênica , Estresse Oxidativo , Complexo Mediador/metabolismo , Complexo Mediador/genética , Espécies Reativas de Oxigênio/metabolismoRESUMO
Wholly distinct from conjugated polymers which are featured by generic charge transfer capability stemming from a conjugated molecular structure, solid nonconjugated polymers mediated charge transport has long been deemed as theoretically impossible because of the deficiency of π electrons along the molecular skeleton, thereby retarding their widespread applications in solar energy conversion. Herein, we first conceptually unveil that intact encapsulation of metal oxides (e.g., TiO2, WO3, Fe2O3, and ZnO) with an ultrathin nonconjugated polyelectrolyte of branched polyethylenimine (BPEI) can unexpectedly accelerate the unidirectional charge transfer to the active sites and foster the defect generation, which contributes to the boosted charge separation and prolonged charge lifetime, ultimately resulting in considerably improved photoelectrochemical (PEC) water oxidation activities. The interfacial charge transport origins endowed by BPEI adornment are elucidated, which include acting as a hole-withdrawing mediator, promoting vacancy generation, and stimulating the directional charge flow route. We additionally ascertain that such charge transport characteristics of BPEI are universal. This work would unlock the charge transfer capability of nonconjugated polymers for solar water oxidation. The nonconjugated insulating polymer was utilized as a charge transport mediator for boosting charge migration and separation over metal oxides toward solar water oxidation.
RESUMO
Bacillus thuringiensis is a bacterium capable of differentiating into a spore, a dormant and highly resistant cellular form. During the sporulation process, this bacterium produces insecticidal toxins in the form of a crystal inclusion, usually in the sporulating cell. We previously reported that the B. thuringiensis LM1212 strain can differentiate into two distinct subpopulations of sporeformers and crystal producers and that this division-of-labor phenotype provides the bacterium with a fitness advantage in competition with a typical B. thuringiensis strain. The transcription factor CpcR was characterized as the regulator responsible for this phenotype. Here, we examined how CpcR interacts with the sporulation network to control the cell differentiation. We found that the sporulation process was inhibited prior to polar septum formation and that Spo0A activity was impaired in the presence of cpcR in strain LM1212. Using bioinformatics and genetic tools, we identified a gene positively controlled by CpcR encoding a putative phosphatase of the Spo0E family known to specifically dephosphorylate phosphorylated Spo0A (Spo0A-P). We showed that this protein (called Spo0E1) is a negative regulator of sporulation and that variations in spo0E1 expression can modulate the production of spores. Using fluorescent reporters to follow gene expression at the single-cell level, we correlated expression of cpcR and sporulation genes to the formation of the two differentiated subpopulations. IMPORTANCE Formation of spores is a paradigm for study of cell differentiation in prokaryotes. Sporulation initiation is governed by a gradual increase in the level and activity of the master regulator Spo0A. Spo0A is usually indirectly phosphorylated by a multicomponent phosphorelay, and modulation of this phosphorelay system is a critical aspect of Bacillus physiology. Though we know that this phosphorelay system is usually affected by two negative regulatory mechanisms, i.e., rap genes and spo0E family genes, the regulatory mechanisms controlling the transcription of these genes are poorly understood. Here, we report that the transcription factor CpcR positively regulates a spo0E family gene and that variations in spo0E expression can modulate the production of spores in B. thuringiensis. This work emphasizes the diversity in modes of sporulation and illustrates the diversity in the strategies employed by bacteria to control this differentiation pathway and ensure their survival.
Assuntos
Bacillus thuringiensis , Bacillus subtilis/genética , Bacillus thuringiensis/genética , Bacillus thuringiensis/metabolismo , Proteínas de Bactérias/genética , Proteínas de Bactérias/metabolismo , Diferenciação Celular , Regulação Bacteriana da Expressão Gênica , Esporos Bacterianos/fisiologia , Fatores de Transcrição/genética , Fatores de Transcrição/metabolismoRESUMO
Precisely modulating the spatial charge migration/separation constitutes the central issue in dictating the solar conversion efficiency of photoelectrochemical (PEC) cells, whereas it still remains a grand challenge. Here, we conceptually demonstrate the construction of hierarchically ordered metal oxide (MO)/transition-metal chalcogenide quantum dots (TMC QDs) multilayered heterostructured photoanodes, that is, MO/[TMC QDs(+)/TMC QDs(-)]n (TMC QDs: CdTe, CdSe, CdS), by a simple and general bottom-up self-assembly route. Tailor-made intrinsically oppositely charged TMC QDs are alternately deposited on the highly ordered MO via a generic ligand-triggered electrostatic interaction to craft heterostructured photoanodes. The charge-transfer pathway stimulated by the photosensitization of TMC QDs is finely tuned by the assembly sequence. The advantageous multilayered nanoarchitecture renders the MO/[TMC QDs(+)/TMC QDs(-)]n photoanodes exhibit substantially enhanced PEC performances under light irradiation, owing to the applicable energy-level configuration and peculiar combination fashion between building blocks and considerably boosted interfacial charge separation resulting from generating spatial tandem charge transport. Furthermore, photosensitization efficiency comparison among TMC QDs is comprehensively performed with PEC mechanisms elucidated.
RESUMO
The treatment of refractory Glaucoma is a difficult problem in clinical ophthalmology. For refractory glaucoma patients with hyphema, shallow anterior chamber, anterior conglutination of peripheral chamber angle, corneal endothelium dystrophy or decompensated, at present, there is no effective treatment. In order to solve this problem, a new type posterior integral glaucoma valve with IOP control device was designed using medical titanium alloy, and the valve model was established by Abaqus software, and the stiffness and preload of the valve were analyzed by finite element method. The results showed that the opening and closing of the valve were controlled automatically by the pressure difference between the front and back of the valve, and the opening and flow rate of the valve increase dynamically with the increase of intraocular pressure, and finally reached the set ideal IOP value of steady state.
Assuntos
Implantes para Drenagem de Glaucoma , Glaucoma , Análise de Elementos Finitos , Seguimentos , Humanos , Pressão Intraocular , Resultado do TratamentoRESUMO
Conjugated polymers are deemed as conductive carrier mediators for engendering the π electrons along the molecular framework, while the role of nonconjugated insulated polymers has been generally overlooked without the capability to participate in the solar-powered oxidation-reduction kinetics and charge-transfer process. Alternatively, considering the ultrashort charge lifetime and significant deficiency of metal nanocluster (NC)-based photosystems, the fine tuning of charge migration over atomically precise ultrasmall metal NCs as novel light-harvesting antennas has so far not yet been unleashed. Here, we unlock the charge-transfer capability of a nonconjugated polymer to modulate the charge flow over metal NCs (Aux and Au25) by such a solid-state nonconductive polymer via a conceptually new chemistry strategy by which l-glutathione (GSH)-capped gold (Aux@GSH) NCs and poly(diallyl-dimethylammonium chloride) (PDDA) were alternately self-assembled on the metal oxide (MO: WO3, Fe2O3, and TiO2) substrates. The ultrathin nonconjugated PDDA interim layer periodically intercalated in-between Aux (Au25) NC layers concurrently serves as an unexpected charge-transfer mediator to foster the unidirectional electron flow from Aux(Au25) NCs to MOs by forming a tandem charge-transfer chain, hence endowing the multilayered MO/(PDDA-Aux)n heterostructures with significantly boosted photoelectrochemical water oxidation performance under light irradiation. The unanticipated role of PDDA as a cascade charge mediator is demonstrated to be universal. Our work would unlock the potential charge-transport capability of nonconjugated polymers as a novel charge mediator for solar-to-chemical conversion.
RESUMO
Modulation of photoinduced charge separation/migration and construction of controllable charge transfer pathway over photoelectrodes have been attracting enduring interest in semiconductor-based photoelectrochemical (PEC) cells but suffer from sluggish charge transport kinetics. Here, we report a general approach to fabricate NP-TNTAs/(TMCs QDs/PSS)n (X = Te, Se, S) photoanodes via a facile and green electrostatic layer-by-layer (LbL) self-assembly strategy, for which transition-metal chalcogenides quantum dots (TMCs QDs) [CdX (X = Se, Te, S)] and poly(sodium 4-styrenesulfonate) (PSS) were periodically deposited on the nanoporous TiO2 nanotube arrays (NP-TNTAs) via substantial electrostatic force, resulting in the continuous charge transfer pathway. NP-TNTAs/(TMCs QDs/PSS)n photoanodes demonstrate significantly enhanced solar-driven photoelectrochemical (PEC) water oxidation activities, relative to NP-TNTAs and TMCs QDs under visible and simulated sunlight irradiation, predominantly because of the suitable energy level configuration between NP-TNTAs and TMCs QDs, unique integration mode, and high-speed interfacial charge separation rate endowed by LbL assembly. The ultrathin PSS intermediate layer functions as "molecule glue" for pinpoint and uniform self-assembly of TMCs QDs on the framework of NP-TNTAs and photosensitization effect of TMCs QDs triggers the unidirectional charge transfer cascade, synergistically boosting the charge separation/transfer efficiency. Our work offers an efficacious approach to craft multilayered photoelectrodes and spur further interest in finely tuning the spatial charge flow in PEC cell for solar-to-hydrogen conversion.
RESUMO
Transition metal chalcogenide quantum dots (TMC QDs) represent promising light-harvesting antennas because of their fascinating physicochemical properties including quantum confinement effect and suitable energy band structures. However, TMC QDs generally suffer from poor photoactivities and photostability due to deficiency of active sites and ultrafast recombination rate of photoinduced charge carriers. Here, we demonstrate how to rationally arouse the charge transfer kinetic of TMC QDs by close monolayered graphene (GR) encapsulation via a ligand-dominated layer-by-layer (LbL) assembly utilizing oppositely charged TMC QDs and GR nanosheets as the building blocks. The assembly units were spontaneously and intimately integrated in an alternate integration mode, thereby resulting in the multilayered three-dimensional (3D) TMC QDs/GR ensembles. It was unveiled that multifarious photoactivities of TMC QDs/GR nanocomposites toward versatile photoredox organic catalysis including photocatalytic aromatic alcohols oxidation to aldehydes and nitroaromatics reduction to amino derivatives under visible light irradiation are conspicuously boosted because of spatially multilayered monolayered GR encapsulation which are superior to those of TMC QDs counterparts. The substantially enhanced photoactivities of TMC QDs/GR nanocomposites arise from reasons including improved light absorption and enhanced charge separation efficacy because of GR encapsulation together with unique stacking mode between TMC QDs and GR endowed by LbL assembly. Our work would provide a promising and efficacious route to smartly accelerate the charge transfer kinetic of TMC QDs for solar energy conversion.
RESUMO
Directional and high-efficiency charge transport to the target active sites of photocatalyst is central to boost the solar energy conversion but is retarded by the sluggish charge transfer kinetics and deficiency of active sites. Here, we report the elaborate design of cascade unidirectional charge transfer channel over spatially multilayered CdS@CdTe@MoS2 dual core-shell ternary heterostructures by partial transformation of CdS to CdTe interim layer followed by seamless encapsulation with an ultrathin MoS2 layer. The suitable energy-level alignment and unique coaxial multilayered assembly mode among the building blocks accelerate the interfacial charge separation and transport, endowing the CdS@CdTe@MoS2 heterostructures with conspicuously enhanced visible-light-driven photocatalytic hydrogen generation performances along with good photostability. The integrated roles of ultrathin CdTe intermediate layer in passivating the defect sites of CdS NWs framework, mediating the unidirectional charge transfer cascade and prolonging the charge lifetime, were ascertained. Besides, the crucial role of the outermost MoS2 layer as the metal-free cocatalyst in enriching the surface active sites for hydrogen evolution was also determined. Our work would provide new alternatives for finely tuning the charge flow toward promising solar-to-hydrogen conversion efficiency.
RESUMO
Al-based foams have drawn increasing attention from industry due to their integration of structure and functional properties. However, large-sized Al-based foams still cannot be homogeneously strengthened by long-time aging due to their low thermal conductivity. In this study, we proposed an age-hardening approach that was applied in large-sized Al-0.16Sc-0.17Zr (wt.%) foams via micro-alloying with Zr and Ti compared with Al-0.21Sc foams; it not only achieved homogeneous strength by long-term aging but also reduced the cost of the alloy by substituting Zr and Ti for the more expensive Sc content. The results show that the Al3(Sc, Zr, Ti) phase with a core-shell structure as a crucial precipitation strengthening phase by micro-alloying with Zr and Ti was less prone to coarsening after a prolonged aging heat treatment. Therefore, the yielding strength of Al-Sc foam micro-alloying with Zr and Ti remained almost unchanged after a maximum aging time of 1440 h due to less coarsening precipitate, which is consistent with the results of mechanical experiments. These findings provide a new way for the heat treatment strengthening of large-sized Al-based foams, thus promoting their industrial applications.
RESUMO
Developing light yet strong aluminum (Al)-based alloys has been attracting unremitting efforts due to the soaring demand for energy-efficient structural materials. However, this endeavor is impeded by the limited solubility of other lighter components in Al. Here, we propose to surmount this challenge by converting multiple brittle phases into a ductile solid solution in Al-based complex concentrated alloys (CCA) by applying high pressure and temperature. We successfully develop a face-centered cubic single-phase Al-based CCA, Al55Mg35Li5Zn5, with a low density of 2.40 g/cm3 and a high specific yield strength of 344×103 N·m/kg (typically ~ 200×103 N·m/kg in conventional Al-based alloys). Our analysis reveals that formation of the single-phase CCA can be attributed to the decreased difference in atomic size and electronegativity between the solute elements and Al under high pressure, as well as the synergistic high entropy effect caused by high temperature and high pressure. The increase in strength originates mainly from high solid solution and nanoscale chemical fluctuations. Our findings could offer a viable route to explore lightweight single-phase CCAs in a vast composition-temperature-pressure space with enhanced mechanical properties.
RESUMO
The novel protein MclX (mother cell lysis X) in Bacillus thuringiensis subsp. kurstaki strain HD73 (B. thuringiensis HD73) was characterized in this work. MclX has no known domain and its gene deletion in HD73 resulted in Cry1Ac encapsulation in the mother cell and did not influence Cry1Ac protein production or insecticidal activity. In vitro cell wall hydrolysis experiments showed that MclX cannot hydrolyze the cell wall. In mclX deletion mutants, the expression of cwlC (which encodes a key cell wall hydrolase) was significantly decreased, as shown by the ß-galactosidase activity assay. MclX cannot directly bind to the cwlC promoter, based on the electrophoretic mobility shift assay (EMSA). The cwlC was reported to be regulated by σK and GerE. However, the transcriptional activities of sigK and gerE showed no difference between HD73 and the mclX deletion mutant. It is indicated that MclX influenced cwlC expression independently of σK or GerE, through a new pathway to regulate cwlC expression. mclX deletion could be a new approach for insecticidal protein encapsulation in Bacillus thuringiensis.
RESUMO
Sporulation is an important part of the life cycle of Bacillus thuringiensis and the basis for the production of parasporal crystals. This study identifies and characterizes two homologous spoVS genes (spoVS1 and spoVS2) in B. thuringiensis, both of whose expression is dependent on the σH factor. The disruption of spoVS1 and spoVS2 resulted in defective B. thuringiensis sporulation. Similar to Bacillus subtilis, B. thuringiensis strain HD(ΔspoVS1) mutants showed delayed formation of the polar septa, decreased sporulation efficiency, and blocked spore release. Different from B. subtilis, B. thuringiensis HD(ΔspoVS1) mutants had disporic septa and failed to complete engulfment in some cells. Moreover, HD(ΔspoVS2) mutants had delayed spore release. The effect of spoVS1 deletion on polar septum delay and sporulation efficiency could be compensated by spoVS2. ß-Galactosidase activity analysis showed that the expression of pro-sigE and spoIIE decreased to different degrees in the HD(ΔspoVS1) and HD(ΔspoVS2) mutants. The different effects of the two mutations on the expression of sporulation genes led to decreases in Cry1Ac production of different levels. IMPORTANCE There is only one spoVS gene in B. subtilis, and its effects on sporulation have been reported. In this study, two homologous spoVS genes were found and identified in B. thuringiensis. The different effects on sporulation and parasporal crystal protein production in B. thuringiensis and their relationship were investigated. We found that these two homologous spoVS genes are highly conserved in the Bacillus cereus group, and therefore, the functional characterization of SpoVS is helpful to better understand the sporulation processes of members of the Bacillus cereus group.
Assuntos
Toxinas de Bacillus thuringiensis/biossíntese , Bacillus thuringiensis/genética , Proteínas de Bactérias/genética , Proteínas de Bactérias/metabolismo , Endotoxinas/biossíntese , Proteínas Hemolisinas/biossíntese , Esporos Bacterianos/crescimento & desenvolvimento , Bacillus thuringiensis/crescimento & desenvolvimento , Deleção de Genes , Regulação Bacteriana da Expressão Gênica/genética , Fator sigma/genética , Fator sigma/metabolismoRESUMO
Atomically precise metal nanoclusters (NCs) have recently been unleashed as novel photosensitizers but inevitably suffer from light-induced self-transformation to metal nanocrystals (NYs), leading to substantially reduced photoredox activities. Herein, we conceptually demonstrate how to manipulate the intrinsic instability of metal NCs for smartly crafting long-range cascade charge transfer chain assisted by an ultrathin poly(dialyldimethylammonium chloride) (PDDA) layer that was intercalated at the interface of metal NCs and semiconductor. The unidirectional electron flow endowed by Schottky-type self-transformed metal NYs and unexpected electron-withdrawing capability of PDDA layer concurrently foster the charge transfer cascade, resulting in the markedly enhanced net efficiency of photocatalytic hydrogen evolution performances under visible light irradiation. Our work opens new frontiers for judiciously harnessing the inherent detrimental instability of metal NCs for boosted charge transfer toward solar-to-hydrogen conversion.
RESUMO
Finely tuning the charge transfer constitutes a central challenge in photocatalysis, yet exquisite control of the directional charge transfer to the target reactive sites is hindered by the rapid charge recombination. Herein, dual separated charge transport channels were fabricated in a one-dimensional transition-metal chalcogenide (TMC)-based system via an elaborate layer-by-layer (LbL) self-assembly approach, for which oppositely charged metal-ion-coordinated branched polyethylenimine (BPEI) and MoS2 quantum dots (QDs) were alternately integrated to fabricate the multilayered TMC@(BPEI/MoS2 QDs)n heterostructures with controllable interfaces. Photocatalytic hydrogen generation performances of such ternary heterostructures under visible light irradiation were evaluated, which unravels that the BPEI layer not only behaves as "molecule glue" to enable the electrostatic LbL assembly with MoS2 QDs in an alternate stacking fashion on the TMC frameworks but also acts as a unidirectional hole-transfer channel. More significantly, transition-metal ions (Fe2+, Co2+, Ni2+, Cu2+, and Zn2+) coordinated on the outmost BPEI layer are able to function as interfacial electron transfer mediators for accelerating the interfacial cascade electron transport efficiency. These simultaneously constructed dual high-speed electron and hole-transfer channels are beneficial for boosting the charge separation and enhancing the photocatalytic hydrogen evolution performances.
RESUMO
Glutathione-protected Aux nanoclusters uniformly and intimately embedded at the interface of CdSe QDs and graphene were in situ self-transformed to Au nanocrystals (NCs) via a facile thermal reduction strategy. The inlaid Au NPs substantially accelerate the interfacial directional charge transfer toward multifarious photoreduction catalysis under visible light irradiation.
Assuntos
Linfoma de Burkitt , Citocinas , Células Th1 , Células Th2 , Humanos , Criança , Linfoma de Burkitt/imunologia , Masculino , Feminino , Pré-Escolar , Células Th1/imunologia , Células Th2/imunologia , Citocinas/metabolismo , Adolescente , Subpopulações de Linfócitos/metabolismo , Subpopulações de Linfócitos/imunologia , Lactente , População do Leste AsiáticoRESUMO
A three-dimensional (3D) porous architecture combining porous vanadium nitride nanoribbons with reduced graphene oxide was prepared through a hydrothermal process and subsequent thermal annealing in an ammonia/argon mixed atmosphere. Then, the obtained 3D porous vanadium nitride nanoribbon/reduced graphene oxide (PVNN/RGO) composite was explored as the counter electrode of dye-sensitized solar cells (DSCs). As evidenced by the electrochemical measurements, the 3D PVNN/RGO composite demonstrates excellent electrocatalytic performance, which is comparable to that of Pt. This can be attributed to the fact that the 3D architecture composite of porous vanadium nitride and reduced graphene oxide can simultaneously provide a favorable electrolyte diffusion channel, a fast electron-transport network, and an abundance of efficient electrocatalytic active sites. By employing such PVNN/RGO composite as the counter electrode, the fabricated DSC can achieve a conversion efficiency of 7.43%, which is comparable to that of the conventional Pt counter electrode (7.74%). Therefore, the 3D PVNN/RGO composite is a promising low-cost alternative to the expensive Pt as a counter electrode in DSCs.