Carbon Nanotubes as Controllable Electric-Field-Induced Bipolar Electrodes for Efficient Water Purification.

Advanced oxidation processes (AOPs) are the most efficient water cleaning technologies, but their applications face critical challenges in terms of mass/electron transfer limitations and catalyst loss/deactivation. Bipolar electrochemistry (BPE) is a wireless technique that is promising for energy and environmental applications. However, the synergy between AOPs and BPE has not been explored. In this study, by combining BPE with AOPs, we develop a general approach of using carbon nanotubes (CNTs) as electric-field-induced bipolar electrodes to control electron transfer for efficient water purification. This approach can be used for permanganate and peroxide activation, with superior performances in the degradation of refractory organic pollutants and excellent durability in recycling and scale-up experiments. Theoretical calculations, in situ measurements, and physical experiments showed that an electric field could substantially reduce the energy barrier of electron transfer over CNTs and induce them to produce bipolar electrodes via electrochemical polarization or to form monopolar electrodes through a single particle collision effect with feeding electrodes. This approach can continuously provide activated electrons from one pole of bipolar electrodes and simultaneously achieve "self-cleaning" of catalysts through CNT-mediated direct oxidation from another pole of bipolar electrodes. This study provides a fundamental scientific understanding of BPE, expands its scope in the environmental field, and offers a general methodology for water purification.

Synthesis of mesoporous-structured MIL-68(Al)/MCM-41-NH2 for methyl orange adsorption: Optimization and Selectivity.

Here, we report a novel amino-modified mesoporous-structured aluminum-based metal-organic framework adsorbent, MIL-68(Al)/MCM-41-NH2, for dye sewage treatment. The introduction of molecular sieves overcomes the inherent defects of microporous MOFs in contaminant transfer and provides more active sites to enhance adsorption efficiency. Compared with using organic amino ligands directly, this strategy is ten times cheaper. The composite was well characterized and analyzed in terms of morphology, structure and chemical composition. Batch experiments were carried out to study the influences of essential factors on the process, such as pH and temperature. In addition, their interactions and the optimum conditions were examined using response surface methodology (RSM). The adsorption kinetics, isotherms and thermodynamics were systematically elucidated. In detail, the adsorption process conforms to pseudo-second-order kinetics and follows the Sips and Freundlich isothermal models. Moreover, the maximum adsorption capacity Qs of methyl orange (MO) was 477 mg g-1. It could be concluded that the process was spontaneous, exothermic, and entropy-reducing. Several binary dye systems have been designed for selective adsorption research. Our material has an affinity for anionic pigments. The adsorption mechanisms were discussed in depth. The electrostatic interaction might be the dominant effect. Meanwhile, hydrogen bonding, π-π stacking, and pore filling might be important driving forces. The excellent thermal stability and recyclability of the adsorbent are readily noticed. After five reuse cycles, the composite still possesses a removal efficiency of 90% for MO. Overall, the efficient and low-cost composite can be regarded as a promising adsorbent for the selective adsorption of anionic dyes from wastewater.

Towards BioMnOx-mediated intra/extracellular electron shuttling for doxycycline hydrochloride metabolism in Bacillus thuringiensis.

Doxycycline hydrochloride (DCH) could be continuously removed by Bacillus thuringiensis S622 with the in-situ biogenic manganese oxide (BioMnOx) via oxidizing/regenerating. The DCH removal rate was significantly increased by 3.01-fold/1.47-fold at high/low Mn loaded via the integration of biological (intracellular/extracellular electron transfer (IET/EET)) and abiotic process (BioMnOx, Mn(III) and •OH). BioMnOx accelerated IET via activating coenzyme Q to enhance electrons transfer (ET) from complex I to complex III, and as an alternative electron acceptor for respiration and provide another electron transfer transmission channel. Additionally, EET was also accelerated by stimulating to secrete flavins, cytochrome c (c-Cyt) and flavin bounded with c-Cyt (Flavins & Cyts). To our best knowledge, this is the first report about the role of BioMnOx on IET/EET during antibiotic biodegradation. These results suggested that Bacillus thuringiensis S622 incorporated with BioMnOx could adopt an alternative strategy to enhance DCH degradation, which may be of biogeochemical and technological significance.

Bioaugmentation of Moving Bed Biofilm Reactor (MBBR) with Achromobacter JL9 for enhanced sulfamethoxazole (SMX) degradation in aquaculture wastewater.

This study investigated whether bioaugmentation improves sulfamethoxazole (SMX) degradation and nitrogen removal in the Moving Bed Biofilm Reactor (MBBR) system. The effects of the C/N ratio on SMX degradation and nitrogen removal were also evaluated. Using MBBR system operation experiments, the bioaugmented reactor was found to perform more effectively than the non-bioaugmentation reactor, with the highest SMX, nitrate-N, and ammonia-N removal efficiencies of 80.49, 94.70, and 96.09%, respectively. The changes in the sulfonamide resistance genes and bacterial communities were detected at various operating conditions. The results indicate that the diversity of the bacterial communities and the abundance of resistance genes were markedly influenced by bioaugmentation and the C/N ratio, with Achromobacter among the dominant genera in the MBBR system. The bio-toxicity of samples, calculated as the inhibition percentage (IP) toward Escherichia coli, was found to decrease to non-toxic ranges after treatment.

Prompting direct single electron transfer to produce non-radical 1O2/H* by electro-activating peroxydisulfate process with core-shell cathode.

A novel heteroatomic N, P and S co-doped core-shell material (MnFe3O4@PZS) was synthesized by a simple polycondensation hydro-thermal method, and used as the cathode to cooperate with electron-catalysis to activate persulfate (S2O82-) (E-MnFe3O4@PZS-PDS) for tetracycline (TTC) degradation. Radical scavenger studies demonstrated that non-radicals including atomic H* and singlet oxygen (1O2) rather than sulfate and hydroxyl radicals were the crucial reactive oxygen species (ROS). Electrochemical analysis indicated that Mn doping could promote electro-catalytic process via diverting pathway from four/two-electron to one-electron to generate non-radical H*/1O2 at the cathode, including one-electron oxygen reduction reaction (1e-ORR) (O2→1O2), and one-electron hydrogen reduction reaction (1e-HRR) (H2O+e-→H∗), as evidenced by the lowest onset potential (0.072 V) together with electron transfer number (n = 1.65). Besides, the regeneration/reduction of FeⅡ/Ⅲ/MnⅡ/Ⅲ/Ⅳ and persulfate will not cause excessive consumption of electron and chemicals due to that could directly get the electron individually from the cathode and anode, and finally TTC could be completely degraded with low energy consumption (0.655 kWh m-3). This study provides new insights into the direct single electron activating PDS to produce non-radical H*/1O2 via core-shell catalytic MnFe3O4@PZS, and displays a promising application in wastewater treatment.

Simultaneous separation and determination of seven chelating agents using high-performance liquid chromatography based on statistics design.

We describe an optimization approach to determine simultaneously occurring chelating agents (glycine, malonic acid, citric acid, glycolic acid, lactic acid, DL-malic acid, and ethylenediaminetetraacetic acid) in an electroplating effluent using high-performance liquid chromatography. With chromatography signal area and overall resolution considered as responses, detection conditions were optimized via multiple functions combined with response surface methodology and Plackett-Burman design. Optimized detection conditions were as follows: 15 mmol/L ammonium phosphate buffer (pH 2.5), a 94:6 v/v ratio of ammonium phosphate buffer/acetonitrile, a column temperature of 23.3°C, and a mobile phase flow rate of 1 mL/min. The experimental values conformed to the predicted values and were repeatable (relative standard deviation < 6.4%) and linear (r2  > 0.991) over concentration ranges of 1-100 µmol/L. Moreover, the quantification limit (signal-to-noise ratio = 10) and the detection limit (signal-to-noise ratio = 3) ranged from 0.03 to 0.15 µmol/L and from 0.01 to 0.04 µmol/L, respectively. These results indicate that high-performance liquid chromatography coupled with statistical design may be a simple and rapid method for simultaneously determining multiple chelating agents in electroplating wastewater effectively.

Electron transfer involved in bio-Pd (0) synthesis by Citrobacter freundii at different growth phases.

Gram-negative Citrobacter freundii with high Pd (II) reduction capacity was isolated from electroplating wastewater, and the electron transfer involved in Pd (II) bio-reduction by C. freundii JH was investigated in phosphate buffer saline solution with sodium formate as sole electron donor under anaerobic condition. FTIR spectra indicated that hydroxyl and amine groups on cell wall participated Pd (II) bio-sorption. TEM, XRD, XPS results confirmed that Pd (0) nanoparticles (NPs) could be bio-synthesized intra/extracellularly. Meanwhile, pH turn-over were observed owing to the reduction of cytochrome c (c-Cyt) in bio-reduction process. EPR spectra indicated that free radicals (OH) was generated from high concentration Pd (II), which would cause seriously damage to cell. Despite of the lower tolerance to Pd (II), the cells at logarithmic phase exhibited higher Pd (II) reduction capacity (72.21%) than that at stationary phase (56.21%), which might be related to the relatively stronger proton motive force (PMF) created by the substrate oxidation and the electron transfer, as evidenced by electrochemical experiments (CV, DPV, amperometric I-t curves) and protein denaturalization experiments. Additionally, c-Cyt and riboflavin were confirmed to be important participants in electron transfer. Finally, a putative synthesis mechanism of Pd (0)-NPs was deduced. This study contributed to further understanding the electron transfer in Pd (II) reduction, and provided more information for the bio-synthetic of metal nanoparticles.

Immobilization of laccase onto meso-MIL-53(Al) via physical adsorption for the catalytic conversion of triclosan.

Due to the abundant binding sites and high stability, a synthesized meso-MIL-53(Al) was selected as the backbone and used for immobilizing laccase (Lac-MIL-53(Al)) to catalytically degrade of TCS. XRD, BET and FTIR analyses proved that the carboxyl groups on PTA of meso-MIL-53(Al) could provide sufficient adsorption sites for physically immobilizing laccase through hydrogen bonds and electrostatic interactions. Although the catalytic efficiency of Vmax/Km slightly decreased from 785 to 607 min-1 due to the mass transfer limitation upon immobilized, Lac-MIL-53(Al) showed high activity recovery (93.8%) and stability. The conformational analysis indicated the laccase could partially enter into the MOF by conformational changes without impairing laccase, although the laccase molecular (6.5 nm × 5.5 nm × 4.5 nm) was larger than the mesopore sizes of the MOF (4 nm). The kinetics indicated that Lac-MIL-53(Al) could remove 99.24% of TCS within 120 min due to the synergy effect of the adsorption of meso-MIL-53(Al) and catalytic degradation of laccase. Meanwhile, Lac-MIL-53(Al) could remain approximately 60% of activity for up to 8 times reuse without desorption. The GC/MS and LC/MS/MS analyses further confirmed that TCS could be transformed to 2, 4-DCP by laccase via the breakage of the ether bond, or to passivated dimers, trimers and tetramers by the self-coupling and oxidization of the phenoxyl radicals, and finally removed by precipitation. In summary, enzyme-MOF composite might be a potential strategy to control the micropollutants in the wastewater.

Biodegradation mechanism of tetracycline (TEC) by strain Klebsiella sp. SQY5 as revealed through products analysis and genomics.

Although it has been proved that abiotic processes can transform tetracycline (TEC), little is known about how microbial processes may degrade TEC in aquatic environment. The objective of this study is to investigate the biodegradation pathway of TEC by strain Klebsiella sp. SQY5 and molecular mechanism of TEC resistance under the aerobic conditions. Effects of mycelium, intracellular, and extracellular enzyme on TEC degradation process were explored, suggesting that mycelium contributed the most of TEC degradation with a maximum efficiency of 58.64%. Biodegradation characteristic of TEC and its degradation products were studied. The results showed that nine possible biodegradation products were identified, and a potential biodegradation pathway was proposed including the removal of methyl, carbonyl, and amine groups. The functional genes of this bacterium were also determined by genomics, and analysis indicated that functional genes that could be relevant to hydrolysis, ring opening and oxidation played an important role in the process of TEC biodegradation. Results from this study can provide a theoretical basis for better estimating the fate, transportation, and degradation of antibiotics in aquatic environment.

Action of oxytetracycline (OTC) degrading bacterium and its application in Moving Bed Biofilm Reactor (MBBR) for aquaculture wastewater pre-treatment.

In this study, the characteristics of biodegradation of oxytetracycline (OTC) by strain Ochrobactrum sp. KSS10 were studied under various environmental conditions, including initial OTC concentrations, variable temperature, initial pH, and diverse carbon sources. The capability of this bacterial strain for performing simultaneous OTC degradation and nitrate reduction was also explored under aerobic conditions. An OTC degradation ratio of 63.33% and a nitrate removal ratio of 98.64% were obtained within 96 h. In addition, removal of OTC and ammonia from synthetic aquaculture wastewater by a Moving Bed Biofilm Reactor (MBBR) and changes in the resistant genes of microbial communities were also investigated. The results demonstrated that the strain KSS10 was the dominant contributor in OTC and ammonia removal in the MBBR chamber. It removed almost all ammonia and approximately 76.42% of OTC. The abundances of genes tetL, tetX and intI1 were reduced by the MBBR, but the abundance of tetG and tetM were increased due to horizontal and vertical gene transfers. Such a result can potentially be used by the strain KSS10 for removing antibiotics and nitrogen from aquaculture wastewater during pre-treatment.

Research progress on distribution, migration, transformation of antibiotics and antibiotic resistance genes (ARGs) in aquatic environment.

Antimicrobial and antibiotics resistance caused by misuse or overuse of antibiotics exposure is a growing and significant threat to global public health. The spread and horizontal transfer of antibiotic resistant bacteria (ARB) and antibiotic resistance genes (ARGs) by the selective pressure of antibiotics in an aquatic environment is a major public health issue. To develop a better understanding of potential ecological risks die to antibiotics and ARGs, this study mainly summarizes research progress about: (i) the occurrence, concentration, fate, and potential ecological effects of antibiotics and ARGs in various aquatic environments, (ii) the threat, spread, and horizontal gene transfer (HGT) of ARGs, and (iii) the relationship between antibiotics, ARGs, and ARB. Finally, this review also proposes future research direction on antibiotics and ARGs.

Positive effects of bio-nano Pd (0) toward direct electron transfer in Pseudomona putida and phenol biodegradation.

This study constructed a biological-inorganic hybrid system including Pseudomonas putida (P. putida) and bioreduced Pd (0) nanoparticles (NPs), and inspected the influence of bio-nano Pd (0) on the direct electron transfer and phenol biodegradation. Scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM-EDX) showed that bio-nano Pd (0) (~10 nm) were evenly dispersed on the surface and in the periplasm of P. putida. With the incorporation of bio-nano Pd (0), the redox currents of bacteria in the cyclic voltammetry (CV) became higher and the oxidation current increased as the addition of lactate, while the highest increase rates of two electron transfer system (ETS) rates were 63.97% and 33.79%, respectively. These results indicated that bio-nano Pd (0) could directly promote the electron transfer of P. putida. In phenol biodegradation process, P. putida-Pd (0)- 2 showed the highest k (0.2992 h-1), µm (0.035 h-1) and Ki (714.29 mg/L) and the lowest apparent Ks (76.39 mg/L). The results of kinetic analysis indicated that bio-nano Pd (0) markedly enhanced the biocatalytic efficiency, substrate affinity and the growth of cells compared to native P. putida. The positive effects of bio-nano Pd (0) to the electron transfer of P. putida would promote the biodegradation of phenol.

Filtration and Electrochemical Disinfection Performance of PAN/PANI/AgNWs-CC Composite Nanofiber Membrane.

The removal and inactivation of waterborne pathogens from drinking water are important for human health. Here, a polyacrylonitrile/polyaniline/silver nanowires-carbon fiber cloth (PAN/PANI/AgNWs-CC) composite nanofiber membrane was fabricated using a simple and rapid coelectrospinning process, and an electrical device was applied with the PAN/PANI/AgNWs-CC filter for water electrochemical disinfection. The effects of voltage, flow rate, and microbial concentration on the filtration and electrochemical disinfection performance of the nanocomposite membrane were investigated. The characterization results show that PAN/PANI/AgNWs with uniform diameters and without beads were successfully fabricated on CC. AgNWs were uniformly distributed in the PAN/PANI/AgNWs. The PAN/PANI/AgNWs-CC filter was an effective sieve for completely removing both Escherichia coli and Staphylococcus aureus in the absence of applied voltage, and the sieved bacteria were completely inactivated by the released silver within 8 h. Over 99.999% inactivation of the sieved bacteria was achieved within a few seconds by concurrent filtration and electrochemical disinfection under a voltage of 3 V. This high performance is enabled by means of an electrical mechanism, and an extremely high electric field induces sharp AgNWs tips to generate electroporated pores in the bacteria. The electrochemical PAN/PANI/AgNWs-CC membrane is an excellent material with potential application value in point-of-use drinking water treatment.

Pd/RGO modified carbon felt cathode for electro-Fenton removing of EDTA-Ni.

Ethylenediaminetetraacetic acid (EDTA) forms stable complexes with toxic metals such as nickel due to its strong chelation. The electro-Fenton (EF) process using a cathode made from palladium (Pd), reduced graphene oxide (RGO) and carbon felt, fed with air, exhibited high activities and stability for the removal of 10 mg L(-1) EDTA-Ni solution. Pd/RGO catalyst was prepared by one-pot synthesis; the scanning electron microscopy and X-ray diffraction analysis indicated nanoparticles and RGO were well distributed on carbon felt, forming three dimensional architecture with both large macropores and a mesoporous structure. The cyclic voltammetric results showed that the presence of RGO in Pd/RGO/carbon felt significantly increased the current response of two-electron reduction of O2 (0.45 V). The key factors influencing the removal efficiency of EDTA-Ni, such as pH, current and Fe(2+) concentration, were investigated. Under the optimum conditions, the removal efficiency of EDTA-Ni reached 83.8% after 100 min EF treatment. Mechanism analysis indicated that the introduction of RGO in Pd/RGO/carbon felt significantly enhanced the electrocatalytic activities by inducing •OH in the EF process; direct H2O2 oxidation still accounted for a large amount of EDTA-Ni removal efficiency.

Anaerobic ammonium oxidation in polyvinyl alcohol and sodium alginate immobilized biomass system: a potential tool to maintain anammox biomass in application.

Anaerobic ammonium oxidation (anammox) has been proved to be a promising nitrogen removal method for treating ammonium-rich wastewater. However, because of the low-growth rate of anammox bacteria, maintenance of a sufficient amount of anammox biomass in reactor became a key factor in application. Gel immobilization is an efficient method to prevent biomass from being washed out and to promote hyper-concentrated cultures. This study focused on a nitrogen removal process by anammox enrichment culture immobilized in polyvinyl alcohol and sodium alginate (PVA-SA) gel beads. The rapid startup of reactor demonstrated that gel entrapment was supposed to be a highly effective technique for immobilizing anammox bacteria. The anammox bacteria present in the enrichment were identified to be Jettenia-like species (>98%). Moreover, the effect of hydraulic retention time (HRT), pH, and temperature on immobilized anammox processes were investigated. The effect of pH and temperature on the anammox process was evidently weakened in PVA-SA immobilized gel beads, however, the effect of HRT on the anammox reaction was enhanced. Therefore, a stable operated reactor could be obtained in an anaerobic sequencing batch reactor, which proved gel immobilization was an excellent method to maintain the biomass in anammox reactor for application.

Synergistic Effect of Ion Doping and Type-II Heterojunction Construction and Ciprofloxacin Degradation by MIL-68(In,Bi)-NH2@BiOBr under Visible Light.

Heterojunction structure and ion doping techniques are viable tactics in facilitating the generation and separation of photogenerated electrons and holes in photocatalysis. In the current study, a novel Bi ion-doped MIL-68(In,Bi)-NH2@BiOBr (MIBN@BOB) type-II heterojunction was first synthesized in a one-step solvothermal reaction. Doping of Bi ions not only broadened the light-sensing range but also provided reliable anchor sites for the in situ growth of BiOBr. Meanwhile, the heterostructure supplied new channels for photogenerated carriers, accelerating the transfer and inhibiting the recombination of photogenerated electron-hole. The obtained MIBN@BOB exhibited enhanced photocatalytic performance (91.1%) than MIL-68(In)-NH2 (40.8%) and BiOBr (57.5%) in ciprofloxacin (CIP) degradation under visible light, with excellent reusability. Photocatalysts were characterized in detail, and a series of photoelectrochemical tests were utilized to analyze the photoelectric properties. MIBN@BOB were deduced to conform the electron conduction mechanism of conventional type-II heterojunctions. More importantly, based on the above experiments and density functional theory (DFT) calculation, BiOBr-Bi in MIBN@BOB can serve as the major active sites of CIP enrichment, and •O2- and 1O2 generated at the BiOBr interface can react with the adsorbed CIP directly. Lastly, the possible degradation products and pathways of CIP were analyzed by liquid chromatography-tandem mass spectrometry (LC/MS/MS). This study provides a reference for the construction of ion-doping-modified metal-organic framework (MOF)-based heterojunction photocatalysts and their application in antibiotic removal.

Unraveling the effects and mechanisms of antibiotics on aerobic simultaneous nitrogen and phosphorus removal by Acinetobacter indicus CZH-5.

The effects of antibiotics, such as tetracycline, sulfamethoxazole, and ciprofloxacin, on functional microorganisms are of significant concern in wastewater treatment. This study observed that Acinetobacter indicus CZH-5 has a limited capacity to remove nitrogen and phosphorus using antibiotics (5 mg/L) as the sole carbon source. When sodium acetate was supplied (carbon/nitrogen ratio = 7), the average removal efficiencies of ammonia-N, total nitrogen, and orthophosphate-P increased to 52.46 %, 51.95 %, and 92.43 %, respectively. The average removal efficiencies of antibiotics were 84.85 % for tetracycline, 39.32 % for sulfamethoxazole, 18.85 % for ciprofloxacin, and 23.24 % for their mixtures. Increasing the carbon/nitrogen ratio to 20 further improved the average removal efficiencies to 72.61 % for total nitrogen and 97.62 % for orthophosphate-P (5 mg/L antibiotics). Additionally, the growth rate and pollutant removal by CZH-5 were unaffected by the presence of 0.1-1 mg/L antibiotics. Transcriptomic analysis revealed that the promoted translation of aceE, aarA, and gltA genes provided ATP and proton -motive forces. The nitrogen metabolism and polyphosphate genes were also affected. The expression of acetate kinase, dehydrogenase, flavin mononucleotide enzymes, and cytochrome P450 contributed to antibiotic degradation. Intermediate metabolites were investigated to determine the reaction pathways.

[Adsorption Properties of Magnetic Phosphorous Camellia Oleifera Shells Biochar to Sulfamethoxazole in Water].

Magnetic phosphorous biochar （MPBC） was prepared from Camellia oleifera shells using phosphoric acid activation and iron co-deposition. The materials were characterized and analyzed through scanning electron microscopy （SEM）， X-ray diffractometry （XRD）， specific surface area and pore size analysis （BET）， Fourier infrared spectroscopy （FT-IR）， and X-ray photoelectron spectroscopy （XPS）. MPBC had a high surface area （1 139.28 m2·g-1） and abundant surface functional groups， and it could achieve fast solid-liquid separation under the action of an external magnetic field. The adsorption behavior and influencing factors of sulfamethoxazole （SMX） in water were investigated. The adsorbent showed excellent adsorption properties for SMX under acidic and neutral conditions， and alkaline conditions and the presence of CO32- had obvious inhibition on adsorption. The adsorption process conformed to the quasi-second-order kinetics and Langmuir model. The adsorption rate was fast， and the maximum adsorption capacity reached 356.49 mg·g-1. The adsorption process was a spontaneous exothermic reaction， and low temperature was beneficial to the adsorption. The adsorption mechanism was mainly the chemisorption of pyrophosphate surface functional groups （C-O-P bond） between the SMX molecule and MPBC and also included hydrogen bonding， π-π electron donor-acceptor （π-πEDA） interaction， and a pore filling effect. The development of MPBC adsorbent provides an effective way for resource utilization of waste Camellia oleifera shells and treatment of sulfamethoxazole wastewater.

Genomics and metabolic characteristics of simultaneous heterotrophic nitrification aerobic denitrification and aerobic phosphorus removal by Acinetobacter indicus CZH-5.

This study provides for the first time a systematic understanding of Acinetobacter indicus CZH-5 performance, metabolic pathway and genomic characteristics for aerobic nitrogen (N) and phosphorus (P) removal. Acinetobacter indicus CZH-5 showed promising performance in heterotrophic nitrification aerobic denitrification and aerobic phosphorus removal. Under optimal conditions, the maximum ammonia-N, total nitrogen and orthophosphate-P removal efficiencies were 90.17%, 86.33%, and 99.89%, respectively. The wide tolerance range suggests the strong environmental adaptability of the bacteria. The complete genome of this strain was reconstructed. Whole genome annotation was used to re-construct the N and P metabolic pathways, and related intracellular substance metabolic pathways were proposed. The transcription levels of related functional genes and enzyme activities further confirmed these metabolic mechanisms. N removal was achieved via the nitrification-denitrification pathway. Furthermore, CZH-5 exhibited significant aerobic P uptake, with phosphate diesters as the main species of intracellular P.

Understanding the degradation of Congo red and bacterial diversity in an air-cathode microbial fuel cell being evaluated for simultaneous azo dye removal from wastewater and bioelectricity generation.

We investigated the mechanism of Congo red degradation and bacterial diversity in a single-chambered microbial fuel cell (MFC) incorporating a microfiltration membrane and air-cathode. The MFC was operated continuously for more than 4 months using a mixture of Congo red and glucose as fuel. We demonstrated that the Congo red azo bonds were reduced at the anode to form aromatic amines. This is consistent with the known mechanism of anaerobic biodegradation of azo dyes. The MFC developed a less dense biofilm at the anode in the presence of Congo red compared to its absence indicating that Congo red degradation negatively affected biofilm formation. Denaturing gradient gel electrophoresis and direct 16S ribosomal DNA gene nucleotide sequencing revealed that the microbial communities differed depending on whether Congo red was present in the MFC. Geobacter-like species known to generate electricity were detected in the presence or absence of Congo red. In contrast, Azospirillum, Methylobacterium, Rhodobacter, Desulfovibrio, Trichococcus, and Bacteroides species were only detected in its presence. These species were most likely responsible for degrading Congo red.