Toroidal Dipole BIC-Driven Highly Robust Perfect Absorption with a Graphene-Loaded Metasurface.

Achieving perfect absorption in few-layer two-dimensional (2D) materials plays a crucial role in applications such as optoelectronics and sensing. However, the underlying mechanisms of all reported works imply a strongly inherent dependence of the central wavelength on the structural parameters. Here, we propose a structure-parameter-deviation immune method for achieving perfect absorption at any desired wavelength by harnessing the toroidal dipole-bound state in the continuum (TD BIC). We experimentally demonstrate the versatile design with a monolayer-graphene-loaded compound grating structure. Such a TD BIC built upon the TE31 mode allows for the transition from BIC to quasi-BIC without breaking the structural symmetry, enabling the stable resonance wavelength while tailoring the quality factors via variation of the gap distance. Comparison with traditional literature further reveals the superiority of our method in realizing highly robust perfect absorption, with a wavelength stability ratio of >15. Remarkably, this approach can be straightforwardly applied to other 2D materials.

Ultrasensitive Terahertz Biodetection Enabled by Quasi-BIC-Based Metasensors.

Advanced sensing devices, highly sensitive, and reliable in detecting ultralow concentrations of circulating biomarkers, are extremely desirable and hold great promise for early diagnostics and real-time progression monitoring of diseases. Nowadays, the most commonly used clinical methods for diagnosing biomarkers suffer from complicated procedures and being time consumption. Here, a chip-based portable ultra-sensitive THz metasensor is reported by exploring quasi-bound states in the continuum (quasi-BICs) and demonstrate its capability for sensing low-concentration analytes. The designed metasensor is made of the designed split-ring resonator metasurface which supports magnetic dipole quasi-BIC combining functionalized gold nanoparticles (AuNPs) conjugated with the specific antibody. Attributed to the strong near-field enhancement near the surface of the microstructure enabled by the quasi-BICs, light-analyte interactions are greatly enhanced, and thus the device's sensitivity is boosted significantly. The system sensitivity slope is up to 674 GHz/RIU, allowing for repeatable resolving detecting ultralow concentration of C-reactive protein (CRP) and Serum Amyloid A (SAA), respectively, down to 1 pM. The results touch a range that cannot be achieved by ordinary immunological assays alone, offering a novel non-destructive and rapid trace measured approach for next-generation biomedical quantitative detection systems.

Active quasi-BIC metasurfaces assisted by epsilon-near-zero materials.

Active devices play a critical role in modern electromagnetic and photonics systems. To date, the epsilon (ε)-near-zero (ENZ) is usually integrated with the low Q-factor resonant metasurface to achieve active devices, and enhance the light-matter interaction significantly at the nanoscale. However, the low Q-factor resonance may limit the optical modulation. Less work has been focused on the optical modulation in the low-loss and high Q-factor metasurfaces. Recently, the emerging optical bound states in the continuum (BICs) provides an effective way for achieving high Q-factor resonators. In this work, we numerically demonstrate a tunable quasi-BICs (QBICs) by integrating a silicon metasurface with ENZ ITO thin film. Such a metasurface is composed of five square holes in a unit cell, and hosts multiple BICs by engineering the position of centre hole. We also reveal the nature of these QBICs by performing multipole decomposition and calculating near field distribution. Thanks to the large tunability of ITO's permittivity by external bias and high-Q factor enabled by QBICs, we demonstrate an active control on the resonant peak position and intensity of transmission spectrum by integrating ENZ ITO thin films with QBICs supported by silicon metasurfaces. We find that all QBICs show excellent performance on modulating the optical response of such a hybrid structure. The modulation depth can be up to 14.8 dB. We also investigate how the carrier density of ITO film influence the near-field trapping and far-field scattering, which in turn influence the performance of optical modulation based on this structure. Our results may find promising applications in developing active high-performance optical devices.

Enhanced light-matter interaction in two-dimensional transition metal dichalcogenides.

Two-dimensional (2D) transition metal dichalcogenide (TMDC) materials, such as MoS2, WS2, MoSe2, and WSe2, have received extensive attention in the past decade due to their extraordinary electronic, optical and thermal properties. They evolve from indirect bandgap semiconductors to direct bandgap semiconductors while their layer number is reduced from a few layers to a monolayer limit. Consequently, there is strong photoluminescence in a monolayer (1L) TMDC due to the large quantum yield. Moreover, such monolayer semiconductors have two other exciting properties: large binding energy of excitons and valley polarization. These properties make them become ideal materials for various electronic, photonic and optoelectronic devices. However, their performance is limited by the relatively weak light-matter interactions due to their atomically thin form factor. Resonant nanophotonic structures provide a viable way to address this issue and enhance light-matter interactions in 2D TMDCs. Here, we provide an overview of this research area, showcasing relevant applications, including exotic light emission, absorption and scattering features. We start by overviewing the concept of excitons in 1L-TMDC and the fundamental theory of cavity-enhanced emission, followed by a discussion on the recent progress of enhanced light emission, strong coupling and valleytronics. The atomically thin nature of 1L-TMDC enables a broad range of ways to tune its electric and optical properties. Thus, we continue by reviewing advances in TMDC-based tunable photonic devices. Next, we survey the recent progress in enhanced light absorption over narrow and broad bandwidths using 1L or few-layer TMDCs, and their applications for photovoltaics and photodetectors. We also review recent efforts of engineering light scattering, e.g., inducing Fano resonances, wavefront engineering in 1L or few-layer TMDCs by either integrating resonant structures, such as plasmonic/Mie resonant metasurfaces, or directly patterning monolayer/few layers TMDCs. We then overview the intriguing physical properties of different van der Waals heterostructures, and their applications in optoelectronic and photonic devices. Finally, we draw our opinion on potential opportunities and challenges in this rapidly developing field of research.

Bound states in the continuum supported by silicon oligomer metasurfaces.

Oligomer metasurfaces have attracted a lot of attention in recent years because of their ability to drive strong resonance effects. In this work, by perturbing the symmetry of the structure, we find that there are a large number of resonance modes in the oligomer metasurfaces associated with the optical bound states in the continuum (BICs) near the communication wavelength. When the positions of two nanodisks of the hexamer oligomers are moved along the x- or y-directions at the same time, the mirror symmetry is broken, and an electric quadrupole BIC and three magnetic dipole BICs are excited. The results of near-field distribution of three-dimensional nanodisks and far-field scattering of multiple dipoles in each quasi-BIC reveal that the four BICs present different optical characteristics. It is noted that the method of symmetry breaking by moving the position of nanodisks can accurately control the asymmetric parameter of symmetry-protected BICs, which provides a route for the realization of ultrahigh quality (Q)-factor oligomer metasurfaces in experiment.

On-chip low-loss all-optical MoSe2 modulator.

Monolayer transition metal dichalcogenides (TMDCs), like MoS2, MoSe2, WS2, and WSe2, feature direct bandgaps, strong spin-orbit coupling, and exciton-polariton interactions at the atomic scale, which could be harnessed for efficient light emission, valleytronics, and polaritonic lasing, respectively. Nevertheless, to build next-generation photonic devices that make use of these features, it is first essential to model the all-optical control mechanisms in TMDCs. Herein, a simple model is proposed to quantify the performance of a 35-µm-long Si3N4 waveguide-integrated all-optical MoSe2 modulator. Using this model, a switching energy of 14.6 pJ is obtained for a transverse-magnetic (TM) and transverse-electric (TE) polarized pump signals at λ = 480 nm. Moreover, maximal extinction ratios of 20.6 dB and 20.1 dB are achieved for a TM and TE polarized probe signal, respectively, at λ = 500 nm with an ultra-low insertion loss of <0.3 dB. Moreover, the device operates with an ultrafast recovery time of 50 ps, while maintaining a high extinction ratio for practical applications. These findings facilitate modeling and designing novel TMDC-based photonic devices.

A Feasible Surface Patterning Method for SEM-DIC: Achieving High-Resolution In Situ Mapping of Local Strain and Microstructure to Reveal the Effect of Slip Transfer on Shear Strain Near Grain Boundaries.

This paper exploited an alternative approach to prepare high-quality speckle patterns by uniformly dispersing nano-silica particles onto sample surfaces, helping digital image correlation (DIC) acquire the maximum spatial resolution of local strain up to 92 nm. A case study was carried out by combining this speckle pattern fabrication method with SEM-DIC and electron backscattering diffraction (EBSD). Thus, in situ mapping of local strain with ultra-high spatial resolution and microstructure in commercially pure titanium during plastic deformation could be achieved, which favored revealing the effect of slip transfer on shear strain near grain boundaries. Moreover, the slip systems could be easily identified via the combination of the SEM-DIC and EBSD techniques even though no obvious deformation trace was captured in secondary electron images. Additionally, the complex geometric compatibility factor $( {m}^{\prime}_c)$ relating to geometric compatibility factors (mʹ) and Schmid factors was proposed to predict the shear strain (εxy) at grain boundaries.

Engineering the optical properties of dielectric nanospheres by resonant modes.

Recent progress in nanoscale optical physics is associated with the development of a new branch of nanophotonics exploring strong Mie resonances in dielectric nanoparticles with high refractive index (HRI). The high-index resonant dielectric nanostructures form building blocks for novel photonic meta-devices with low losses and advanced functionalities. In this work, we investigate the size effect of an HRI cuprous oxide (Cu2O) nanosphere on the optical properties of the structure, such as, scattering and absorption spectrum. We also experimentally demonstrate that the scattering field can be significantly engineered by tuning the radius of Cu2O. It is found that the resonant eigenmodes supported by the nanospheres play the dominant role in the absorption and scattering characteristic of the structure. From the perspective of eigenmodes, we can immediately find the right structure parameters to realize strong absorption (scattering) at either single wavelength or broadband wavelength. Furthermore, the multipole expansion method has been applied to explore the physical nature (i.e. electric mode or magnetic mode) of the eigenmode as well as contributions from different modes.

Giant Gating Tunability of Optical Refractive Index in Transition Metal Dichalcogenide Monolayers.

We report that the refractive index of transition metal dichacolgenide (TMDC) monolayers, such as MoS2, WS2, and WSe2, can be substantially tuned by >60% in the imaginary part and >20% in the real part around exciton resonances using complementary metal-oxide-semiconductor (CMOS) compatible electrical gating. This giant tunablility is rooted in the dominance of excitonic effects in the refractive index of the monolayers and the strong susceptibility of the excitons to the influence of injected charge carriers. The tunability mainly results from the effects of injected charge carriers to broaden the spectral width of excitonic interband transitions and to facilitate the interconversion of neutral and charged excitons. The other effects of the injected charge carriers, such as renormalizing bandgap and changing exciton binding energy, only play negligible roles. We also demonstrate that the atomically thin monolayers, when combined with photonic structures, can enable the efficiencies of optical absorption (reflection) tuned from 40% (60%) to 80% (20%) due to the giant tunability of the refractive index. This work may pave the way toward the development of field-effect photonics in which the optical functionality can be controlled with CMOS circuits.

Equally efficient interlayer exciton relaxation and improved absorption in epitaxial and nonepitaxial MoS2/WS2 heterostructures.

Semiconductor heterostructures provide a powerful platform to engineer the dynamics of excitons for fundamental and applied interests. However, the functionality of conventional semiconductor heterostructures is often limited by inefficient charge transfer across interfaces due to the interfacial imperfection caused by lattice mismatch. Here we demonstrate that MoS(2)/WS(2) heterostructures consisting of monolayer MoS(2) and WS(2) stacked in the vertical direction can enable equally efficient interlayer exciton relaxation regardless the epitaxy and orientation of the stacking. This is manifested by a similar 2 orders of magnitude decrease of photoluminescence intensity in both epitaxial and nonepitaxial MoS(2)/WS(2) heterostructures. Both heterostructures also show similarly improved absorption beyond the simple superimposition of the absorptions of monolayer MoS(2) and WS(2). Our result indicates that 2D heterostructures bear significant implications for the development of photonic devices, in particular those requesting efficient exciton separation and strong light absorption, such as solar cells, photodetectors, modulators, and photocatalysts. It also suggests that the simple stacking of dissimilar 2D materials with random orientations is a viable strategy to fabricate complex functional 2D heterostructures, which would show similar optical functionality as the counterpart with perfect epitaxy.

Deterministic phase engineering for optical Fano resonances with arbitrary lineshape and frequencies.

We present an approach of deterministic phase engineering that can enable the rational design of optical Fano resonances with arbitrarily pre-specified lineshapes. Unlike all the approaches previously used to design optical Fano resonances, which fall short of designing the resonances with arbitrary lineshapes because of the lack of information for the optical phases involved, we develop our approach by capitalizing on unambiguous knowledge for the phase of optical modes. Optical Fano resonances arise from the interference of photons interacting with two optical modes with substantially different quality factors. We find that the phase difference of the two modes involved in optical Fano resonances is determined by the eigenfrequency difference of the modes. This allows us to deterministically engineer the phase by tuning the eigenfrequency, which may be very straightforward. We use dielectric grating structures as an example to illustrate the notion of deterministic engineering for the design of optical Fano resonances with arbitrarily pre-specified symmetry, linewidth, and wavelengths.

General modal properties of optical resonances in subwavelength nonspherical dielectric structures.

Subwavelength dielectric structures offer an attractive low-loss alternative to plasmonic materials for the development of resonant optics functionalities such as metamaterials and optical antennas. Nonspherical-like rectangular dielectric structures are of the most interest from the standpoint of device development due to fabrication convenience. However, no intuitive fundamental understanding of the optical resonance in nonspherical dielectric structures is available, which has substantially delayed the development of dielectric resonant optics devices. Here, we elucidate the general fundamentals of the optical resonance in nonspherical subwavelength dielectric structures with different shapes (rectangular or triangular) and dimensionalities (1D nanowires or 0D nanoparticles). We demonstrate that the optical properties of nonspherical dielectric structures are dictated by the eigenvalue of the structure's leaky modes. Leaky modes are defined as optical modes with propagating waves outside the structure. We also elucidate the dependence of the modal eigenvalue on physical features of the structure. The eigenvalue shows scale invariance with respect to the size of the structure, weak dependence on the refractive index, but linear dependence on the size ratio of different sides of the structure. We propose a modified Fabry-Perot model to account for the linear dependence. The knowledge of leaky modes, including the role in optical responses and the dependence on physical features, can serve as a powerful guide for the rational design of devices with desired optical resonances. It may open up a pathway to design devices with functionality that has not been explored due to the lack of intuitive understanding, for instance, imaging devices able to sense incident angle or superabsorbing photodetectors.

Ultra-narrowband and rainbow-free mid-infrared thermal emitters enabled by a flat band design in distorted photonic lattices.

Most reported thermal emitters to date employing photonic nanostructures to achieve narrow bandwidth feature the rainbow effect due to the steep dispersion of the involved high-Q resonances. In this work, we propose to realize thermal emissions with high temporal coherence but free from rainbow effect, by harnessing a novel flat band design within a large range of wavevectors. This feature is achieved by introducing geometric perturbations into a square lattice of high-index disks to double the period along one direction. As a result of the first Brillouin zone halving, the guided modes will be folded to the Γ point and interact with originally existing guided-mode resonances to form a flat band of dispersion with overall high Q. Despite the use of evaporated amorphous materials, we experimentally demonstrate a thermal emission with the linewidth of 23 nm at 5.144 µm within a wide range of output angles (from -17.5° to 17.5°).

Regulating Grind-Induced Lattice Distortion for Nickel-Rich Cathodes by Annealing.

The commercialization of high-performance nickel-rich cathodes always awaits a cost-effective, environmentally friendly, and large-scale preparation method. Despite a grinding process normally adopted in the synthesis of the nickel-rich cathodes, lattice distortion, rough surface, and sharp edge transformation inevitably occurr in the resultant samples. In this work, an additional annealing process is proposed that aims at regulating lattice distortion as well as achieving round and smoother morphologies without any structural or elemental modifications. Such a structural enhancement is favored for improved lithium diffusion and electrochemical stability during cycling. Consequently, the annealed cathodes demonstrate a considerable enhancement in capacity retention, escalating from 68.7% to 91.9% after 100 cycles at 1 C. Additionally, the specific capacity is significantly increased from 64 to 142 mAh g-1 at 5 C when compared to the unannealed cathodes. This work offers a straightforward and effective approach for reinforcing the electrochemical properties of nickel-rich cathodes.

Ni/Mg Dual Concentration-Gradient Surface Modification to Enhance Structural Stability and Electrochemical Performance of Li-Rich Layered Oxides.

Li-rich layered oxides (LRLOs), with the advantages of high specific capacity and low cost, are considered as candidates for the next-generation cathode of lithium-ion batteries (LIBs). Unfortunately, sluggish kinetics and interfacial degradation lead to capacity loss and voltage decay of the material during cycling. To address these issues, we propose a Ni/Mg dual concentration-gradient modification strategy for LRLOs. From the center to the surface of the modified materials, the contents of Ni and Mg are gradually increased while the content of Mn is decreased. The high Ni content on the surface increases the proportion of cationic redox, elevating the operating voltage and accelerating reaction kinetics. Moreover, the doped Mg on the surface of the material acting as a stabilizing pillar suppresses the migration of transition metals, stabilizing the layered structure. Therefore, the material with the Ni/Mg dual concentration-gradients delivers a superior electrochemical performance, exhibiting a suppressed voltage decay of 2.8 mV per cycle during 200 cycles (1 C, 2-4.8 V) and an excellent rate capability of 94.84 mAh/g at 7C. This study demonstrates a synergic design to construct high-performance LRLO cathode materials for LIBs.

Origin of the light-induced spin currents in heavy metal/magnetic insulator bilayers.

Light-induced spin currents with the faster response is essential for the more efficient information transmission and processing. Herein, we systematically explore the effect of light illumination energy and direction on the light-induced spin currents in the W/Y3Fe5O12 heterojunction. Light-induced spin currents can be clearly categorized into two types. One is excited by the low light intensity, which mainly involves the photo-generated spin current from spin photovoltaic effect. The other is caused by the high light intensity, which is the light-thermally induced spin current and mainly excited by spin Seebeck effect. Under low light-intensity illumination, light-thermally induced temperature gradient is very small so that spin Seebeck effect can be neglected. Furthermore, the mechanism on spin photovoltaic effect is fully elucidated, where the photo-generated spin current in Y3Fe5O12 mainly originates from the process of spin precession induced by photons. These findings provide some deep insights into the origin of light-induced spin current.

Fractal H-shaped plasmonic nanocavity.

Based on complementary fractal geometry structures, we design a novel infrared quasi-three-dimensional (3D) nanocavity with a localized enhanced field with multiband resonant frequencies. The fractals offer the nanostructure two important characteristics, multiband functionality and a subwavelength effect. The electric field, power flow, and the field intensity distributions are given to indicate the internal mechanism of the localized enhanced field in the nanocavity. Additionally, the effective medium method is established to retrieve the permittivity and impedance of the structure. It is shown that a strongly enhanced localized field is achieved in the nanocavity at two different resonant frequencies by using the finite difference time domain method. The field intensity in the nanocavity is enhanced by a factor of up to 60 times over that of the incident light because of the important contribution of the loss factor in the permittivity. The surface plasmon hybridization is thought to play an important role in the strong localized field enhancement. The multiband property and high localized intensity offer the nanocavity great potential for applications in surface enhanced Raman scattering and other nanoscale novel devices.

Pushing Optical Virus Detection to a Single Particle through a High-Q Quasi-bound State in the Continuum in an All-dielectric Metasurface.

Bound states in the continuum (BICs) have emerged as a powerful platform for boosting light-matter interactions because they provide an alternative way of realizing optical resonances with ultrahigh quality factors, accompanied by extreme field confinement. In this work, we realized an optical biosensor by harnessing a quasi-BIC (qBIC) supported by an all-dielectric metasurface with broken symmetry, whose unit cell is composed of a silicon cuboid with two asymmetric air holes. Thanks to the excellent field confinement within the air gap of a metasurface enabled by such a high-Q qBIC, the figure of merit (FOM) of the biosensor is up to 2136.35 RIU-1. Futhermore, we demonstrated that such a high-Q metasurface can push the detection limit to a few virus particles. Our results may find exciting applications in extreme biochemical sensing like COVID-19 with ultralow concentrations.

Enhanced Cyclability of LiNi0.6Co0.2Mn0.2O2 Cathodes by Integrating a Spinel Interphase in the Grain Boundary.

Nickel-rich layered oxides are promising cathode materials for high-energy-density lithium-ion batteries. Unfortunately, the interfacial instability and intergranular cracks result in fast capacity fading and voltage fading during battery cycling. To address these issues, a coherent spinel interphase in the grain boundary of LiNi0.6Co0.2Mn0.2O2 (NCM) was successfully constructed via solution infusion and heat treatment. The results showed that the spinel (LiMn2O4) interphase could significantly reduce the formation of intergranular cracks during cycling. Meanwhile, the spinel structure on the primary particles effectively suppressed surface degradation, realizing the reduction of interface charge-transfer resistance and electrochemical polarization. As a result, the spinel-modified NCM cathode materials display superior electrochemical cyclability. The 1 wt % spinel phase-modified NCM delivers a discharge capacity of 154.1 mAh g-1 after 300 cycles (1 C, 3-4.3 V) with an excellent capacity retention of 93%.

Comparative Study on Laser Welding Thick-Walled TC4 Titanium Alloy with Flux-Cored Wire and Cable Wire.

In the welding process of thick-walled titanium alloys, the selection of the wire type is one of the critical factors affecting the welding quality. In this paper, flux-cored and cable wires were used as filler materials in the welding of thick-walled titanium alloys. The macrostructure, microstructure, texture, and grain size of both welded joints were compared by employing an optical microscope (OM), scanning electron microscope (SEM), and transmission electron microscope (TEM), and the tensile and impact properties were also evaluated. The comparison result showed that the fusion zone microstructure of both welded joints was dominated by a basketweave structure composed of interwoven acicular α' martensite, whereas the microstructure of flux-cored wire welded joints was finer, and the degree of anisotropy was low. The strength of both welded joints was higher than that of the base metal, ensuring that fracture occurred in the base metal area during tension. The Charpy impact energy of the flux-cored wire welded joint was 16.7% higher than that of the cable wire welded joint, indicating that the welded joint obtained with the flux-cored wire performed better in the welding process of thick-walled titanium alloys.