Phytotherapeutic approach for conquering menopausal syndrome and osteoporosis.

Women face a significant change in their reproductive health as menopause sets in. It is marred with numerous physiological changes that negatively impact their quality of life. This universal, transition phase is associated with menopausal and postmenopausal syndrome, which may spread over 2-10 years. This creates a depletion of female hormones causing physical, mental, sexual and social problems and may, later on, manifest as postmenopausal osteoporosis leading to weak bones, causing fractures and ultimately morbidity and mortality. Menopausal hormone therapy generally encompasses the correction of hormone balance through various pharmacological agents, but the associated side effects often lead to cessation of therapy with poor clinical outcomes. However, it has been noticed that phytotherapeutics is trusted by women for the amelioration of symptoms related to menopause and for improving bone health. This could primarily be due to their reduced side effects and lesser costs. This review attempts to bring forth the suitability of phytotherapeutics/herbals for the management of menopausal, postmenopausal syndrome, and menopausal osteoporosis through several published research. It tries to enlist the available botanicals with their key constituents and mechanism of action for mitigating symptoms associated with menopause as well as osteoporosis. It also includes a list of a few herbal commercial products available for these complications. The article also intends to collate the findings of various clinical trials and patents available in this field and provide a window for newer research avenues in this highly important yet ignored health segment.

Simultaneous estimation of paclitaxel and erlotinib in plasma by liquid chromatography/(+) electrospray tandem mass spectrometry: application in formulation development and pharmacokinetics.

The bio-analytical method was developed and validated for simultaneous detection and quantification of paclitaxel (PAC) and erlotinib (ERL) in plasma samples. The sample preparation process was accomplished by liquid-liquid extraction technique. The dried and reconstituted samples were subjected to chromatography on Discovery -C18 (50 × 4.6 × 5µm) column and a mobile phase, composed of a mixture of 0.1% formic acid in water: acetonitrile (70:30, v/v), in isocratic mode at a flow rate of 0.6 mL/min. Liquid chromatography coupled to tandem mass spectrometry detection in positive ion mode was selected to provide optimal selectivity and sensitivity. The mass transitions of erlotinib, erlotinib13C6, Paclitaxel and docetaxel were m/z 394.5→278.4, m/z 400.4→284.5, m/z 876.6→308.4 and m/z 830.0→304.0 respectively. The linearity in the calibration curves was obtained in the concentration range of 3.6 - 1006.7 ng/ml (r ≥ 0.99) for erlotinib and 5.3 - 1500.0 ng/mL for paclitaxel with an LLOQ (lower limit of quantification) of 3.6 and 5.3 ng/ml respectively. The run time was achieved in 2.5 min only, for all the analytes.

COVID 19 pandemic challenges and their management: A review of medicines, vaccines, patents and clinical trials with emphasis on psychological health issues.

The SARS-CoV-2 (COVID 19) paroxysm is a dominant health exigency that caused significant distress, affecting physical and mental health. Increased mortality, a stressed healthcare system, financial crisis, isolation, and new living and working styles enhanced societal commiseration leading to poor health outcomes. Though people try to maintain good physical health but unfortunately the mental affliction is still ignored. Poor psychological health has emerged as a burgeoning social issue and demands attention. Henceforth, the fundamental objective of this review article is to collate information about COVID-linked physical and psychological agony in diverse population groups with related symptoms and accessible diagnosis techniques. Recent studies have unraveled the fragile mental states of people who have either contracted COVID 19 or had near and dear ones falling prey to it. The impact of the epidemic on the human mind both in short and long-term, with possible risk and preventive factors together with suggested solutions for maintaining good health have also been discussed here. It also enlists the available medications, vaccines and investigational research in the form of patents and clinical trials. This article can be taken as an updated information sheet for COVID 19, accompanied by its management techniques with special emphasis on coping strategies for mental health. Further, it may also assist the policymakers to devise approaches that could enable the public to overcome the pandemic-driven adversity not only in the given situation but also futuristically.

Exploration of fulvic acid as a functional excipient in line with the regulatory requirement.

Fulvic acid, a humic substance often considered as a geopolymer, extracted from different natural resources like Shilajit, Peat, dissolved organic matters, etc. There are several reports of its pharmacological properties and its potential as pharmaceutical excipients. So, we have devised a project to strengthen its claim as a functional excipient. For the given project, lyophilized sample of a dietary supplement product (an aqueous solution of peat derived Fulvic acid) was used. The selected studies were typical for an excipient development like physicochemical properties, flow properties, compatibility with other excipient and stability studies, non-clinical safety studies (acute toxicity in mice whereas sub-acute toxicity in rats) and some functionality tests. We also suggest its ability to form co-crystal with natural phytochemicals. Our group has already reported its ability to enhance solubility and or bioavailability of different BCS class II drugs. Henceforth, we can propose that Fulvic acid appears a good candidate to be further explored as a functional excipient and should be evaluated as per the remaining recommendations of IPEC, USFDA, and USP.

Preparation of levofloxacin loaded in situ gel for sustained ocular delivery: in vitro and ex vivo evaluations.

The major drawback of the eye drops is rapid elimination of drug from the precorneal region, thus ensuing poor bioavailability as well as therapeutic efficacy. To conquer these limitations, a pH triggered in situ gel was developed for sustained delivery of levofloxacin. Two polymers namely hydroxypropyl methylcellulose (HPMC) and sodium alginate along with the boric acid buffer were used to formulate the in situ gel. Based on the various physicochemical evaluation parameters like pH, clarity and gelling capacity placebo formulations were selected and further characterized for viscosity, in vitro release, ex vivo corneal permeation, and histopathological studies. The optimized in situ gel (F28) showed sustained release of 93 ± 4.23% for 24 h and cumulative drug permeation of 71.81 ± 4.7% for 72 h. Additionally, ocular irritation study and histopathology of the formulation treated cornea confirm the non-irritancy of the optimized formulation. Based on all the above performed studies, it can be concluded that the in situ gel would present a fruitful alternative for the ocular infections.

Design of expert guided investigation of native L-asparaginase encapsulated long-acting cross-linker-free poly (lactic-co-glycolic) acid nanoformulation in an Ehrlich ascites tumor model.

Present study explores native L-asparaginase encapsulated long-acting cross-linker-free PLGA-nanoformulation in an Ehrlich ascites tumor model. L-asparaginase-PLGA nanoparticles for tumor were prepared using a double emulsion solvent evaporation technique, optimized and validated by Box-Behnken Design. L-ASN-PNs showed a particle size of 195 nm ± 0.2 nm and a PDI of 0.2. Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) techniques revealed its smooth morphology and elicited an in-vitro release of 80% of the drug, following the Higuchi drug release model. In-vivo studies of L-ASN-PNs on an Ehrlich ascites tumor (EAT) model were completed and compared with the standard medication of 5-fluorouracil (5-FU) treatment. L-ASN-PN treated mice showed a 51.15% decrease in tumor volume and 100% survival rate with no reduction in body weight, no haemotoxicity and no hepatotoxicity, as evident from the hematological parameters, and liver enzyme parameters that were well within the prescribed limits. Chemotherapy has severe side effects and restricted therapeutic success. Henceforth, the purported L-Asparaginase PLGA nanoparticles are a suitable entity for better tumor regression, intra-tumor accumulation and no hematological side-effects.

Co-delivery of gemcitabine and simvastatin through PLGA polymeric nanoparticles for the treatment of pancreatic cancer: in-vitro characterization, cellular uptake, and pharmacokinetic studies.

Despite the ongoing extensive research, cancer therapeutics still remains an area with unmet needs which is hampered by shortfall in the development of newer medicines. The present study discusses a nano-based combinational approach for treating solid tumor. Dual-loaded nanoparticles encapsulating gemcitabine HCl (GM) and simvastatin (SV) were fabricated by double emulsion solvent evaporation method and optimized. Optimized nanoparticles showed a particle size of 258 ± 2.4 nm, polydispersity index of 0.32 ± 0.052, and zeta potential of -12.5 mV. The size and the morphology of the particles wee further confirmed by transmission electron microscopy (TEM) and scanning electron microscopy, respectively of the particles. The entrapment efficiency of GM and SV in the nanoparticles was 38.5 ± 4.5% and 72.2 ± 5.6%, respectively. The in vitro release profile was studied for 60 h and showed Higuchi release pattern. The cell toxicity was done using MTT assay and lower IC50 was obtained with the nanoparticles as compared to the pure drug. The bioavailability of GM and SV in PLGA nanoparticles was enhanced by 1.4-fold and 1.3-fold respectively, compared to drug solution. The results revealed that co-delivery of GM and SV could be used for its oral delivery for the effective treatment of pancreatic cancer.

A novel monolithic controlled delivery system of resveratrol for enhanced hepatoprotection: nanoformulation development, pharmacokinetics and pharmacodynamics.

The current investigation aims to present a novel solid lipid-based nanoparticulate system of resveratrol (RV) for the effective treatment of liver cirrhosis. A simplified solvent injection method was employed and the Box-Behnken experimental design was applied for optimization to get a window particle size of 150-200 nm having maximum entrapment efficiency as well as % release. Optimized resveratrol solid lipid nanoparticles (RV-SLNs) (SR-1) of appropriate characteristics (particle size = 191.1 ± 10.44 nm; zeta potential= -13.56 ± 4.14 mV; entrapment efficiency = 75.23 ± 3.85%; maximum % release = 80.53 ± 3.99%) were produced. Differential scanning calorimetry and X-ray diffraction studies were carried out which collectively proved the reduced crystallinity and stability enhancing the effect of the SLNs. Improved drug stability was further established by the appreciable shelf-life of the formulation from International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use (ICH)-recommended accelerated stability studies. In vivo studies revealed nearly five-fold increase in the bioavailability of SR-1 (AUC0→∞=3411 ± 170.34 µg/ml/h) as compared to RV suspension (AUC0→∞=653.5 ± 30.10 µg/ml/h). Pharmacodynamic data exhibited a significant decrease in the serum biomarker enzymes (serum glutamic oxalo-acetic transaminase (SGOT), serum glutamic pyruvic transaminase (SGPT) and alkaline phosphatase) after oral administration of RV-SLNs as compared to control and marketed (SILYBON(®)) formulations against paracetamol-induced liver cirrhosis. The effect of the treatment was confirmed by the histopathology of the liver microtome sections. Finally, reverse transcriptase-polymerase chain reaction studies were conducted on isolated liver mRNA from SR-1 treated animals and significant down-regulation of tissue inhibitor of metalloproteinases-1 and nuclear factor-kB was witnessed.

QbD Assisted Development of a Compartment and Sequential Drug Delivery System for Periodontotherapy.

Periodontitis, the burgeoning disease, is at an alarming stage. Although this has triggered dedicated research in this area, as the disease itself demands a multi-component therapy, there is an unmet need for a compartment and sequential drug delivery system to ameliorate disease symptoms completely. The hypothesized work consists of multitherapeutic agents such as an antibiotic, a COX-II inhibitor, an MMP inhibitor, and a bone regenerating agent in an insitu gel. However, for the development of the system, as mentioned above, a thorough investigation at each stage is necessary; therefore, the quality-by-design approach was adopted. Furthermore, the current work is a pursuit of studying the quality by design aspects for the fabrication of a compartment system, i.e., in-situ gel for periodontal delivery. The proposed system in-situ gel consists of antibiotic and nano-encapsulating microcapsules. Furthermore, the microcapsules contain a COX-II inhibitor and nanoparticles of MMP inhibitor and bone regenerating agent for complete amelioration of periodontitis. To develop the system as per the QbD approach, the first initial trials and runs were conducted, which helped to decide the quality target product profile (QTPP). However, based on QTPP, critical quality attributes (CQA), critical process parameters (CPP), and critical material attributes (CMAs) were decided for each stage product, i.e., in-situ gel, microcapsules, and nanoparticles. To assess the influence of CPPs and CMAs on CQAs, Pareto charts were constructed, and various risks, along with possible failure modes were studied. In conclusion, the above work will serve as a well-designed scientific mouthpiece for developing a compartment system for periodontotherapy.

Fisetin from Dietary Supplement to a Drug Candidate: An Assessment of Potential

Fisetin is a bioactive compound found in numerous fruits and vegetables, including strawberries, apples, grapes, persimmon, cucumber, onion, etc. The compound is also wellknown for its neurotrophic, anti-inflammatory, anti-carcinogenic, anti-diabetic, and other healthpromoting properties. Although there is increasing agreement that it has therapeutic properties, but its poor water solubility, high lipophilicity, and lower oral bioavailability make it difficult to use clinically. Extensive research has attempted to overcome these restrictions by developing novel and superior delivery systems. Considering the diverse potential, this review is the first to summarise the available data on Fisetin to collate the information related to analytical methods, pharmacological action, their mechanisms, regulatory aspects, and toxicity profile. It also covers the marketed products, related clinical trials, and patent updates of the moiety. In addition, an endeavor has been attempted to discuss and assess the various drug delivery systems employed to increase the biological attributes of Fisetin. The presented manuscript is the first to present a compendium of up-to-date literature on all of the domains considered necessary for this type of natural molecule to carve down its path from being a mere dietary supplement to a promising therapeutic drug candidate. The manuscript is expected to benefit the researchers working on natural and bioactive compounds, industrial scientists, and the general population interested in Fesitin.

Cutting-edge developments in MXene-derived functional hybrid nanostructures: A promising frontier for next-generation water purification membranes.

A novel family of multifunctional nanomaterials called MXenes is quickly evolving, and it has potential applications that are comparable to those of graphene. This article provides a current explanation of the design and performance assessment of MXene-based membranes. The production of MXenes nanosheets are first described, with an emphasis on exfoliation, dispersion stability, and processability, which are essential elements for membrane construction. Further, critical discussion is also given to MXenes potential applications in Vacuum assisted filtration, casting method, Hot press method, electrospinning and electrochemical deposition and layer-by-layer assembly for the creation of MXene and MXene derived nanocomposite membranes. Additionally, the discussion is carried forward to give an insight to the modification methods for the construction of MXene-based membrane are described in the literature, including pure or intercalated nanomaterials, surface modifiers and miscellaneous two-dimensional nanomaterials. Furthermore, the review article highlights the potential utilization of MXene and MXene based membranes in separation and purification processes including removal of small organic molecules, heavy metals, oil-water separation and desalination. Finally, the perspective use of MXenes strong catalytic activity and electrical conductivity for specialized applications that are difficult for other nanomaterials to accomplish are discussed in conclusion and future prospectus section of the manuscript. Overall, important information is given to help the communities of materials science and membranes to better understand the potential of MXenes for creating cutting-edge separation and purification membranes.

In silico and in vitro assessment of an optimized QbD-guided myoinositol and metformin-loaded mucus-penetrating particle-based gel for the amelioration of PCOS.

Polycystic ovarian syndrome (PCOS) is a multi-factorial endocrine disorder affecting women of reproductive age. However, its high prevalence and the unsuccessful translation of conventional modalities have made PCOS a pharmaco-therapeutic challenge. In the present study, we explored bi-formulations (comprising metformin-loaded mucus-penetrating nanoparticles, MTF-MPPs, and myoinositol-loaded mucus-penetrating particles, MI-MPPs) incorporated in a carbomer gel tailored for intravaginal administration. For the development and optimization of the MPPs-gel, a QbD (quality by design) approach was employed, including the initial and final risk assessment, central composite design of experts, and method validation. The optimized MTF-MPPs and MI-MPPs possessed an optimum nanometric particle size (195.0 nm and 178.8 nm, respectively) and a PDI of 0.150 and 0.123, respectively, together with a negligible negative zeta potential (-5.19 mV and -6.19 mV, respectively) through the vaginal mucus. It was observed that the MPPs are small and monodisperse with a neutral surface charge. It was observed that the MPPs-gel formulations released approximately 69.86 ± 4.65% of MTF and 67.14 ± 5.74% of MI within 120 h (5 days), which was observed to be sustained unlike MFT-MI-gel with approximately 94.89 ± 4.17% of MTF and 90.91 ± 15% of MI drugs released within 12 h. The confocal microscopy study of rhodamine-loaded MPPs indicated that they possessed a high fluorescence intensity at a depth of 15 µm, while as the penetration trajectory in the vaginal tissue increased to 35 µm, their intensity was reduced, appearing to be more prominent in the blood vessels. The analyzed data of MPPs-gel suggest that the optimized MPPs-gel formulation has potential to reach the targeted area via the uterovaginal mucosa, which has a wide network of blood vessels. Subsequently, in vivo studies were conducted and the results revealed that the proposed MPPs-gel formulation could regulate the estrous cycle of the reproductive system compared to the conventional formulation. Moreover, the formulation significantly reduced the weight of the ovaries compared to the control and conventional vaginal gel. Biochemical estimation showed improved insulin and sex hormone levels. Thus, the obtained data revealed that the deep penetration and deposition of MTF and MI on the targeted area through intravaginal delivery resulted in better therapeutic effects than the conventional vaginal gel. The obtained results confirmed the amelioration of PCOS upon treatment using the prepared MPPs-gel formulation. According to the relevant evaluation studies, it was concluded that MPPs-gel was retained in the vaginal cavity for systemic effects. Also, the sustained and non-irritating therapeutic effect meets the safety aspects. This work serves as a promising strategy for intravaginal drug delivery.

Novel Chitosan-Coated Liposomes Coloaded with Exemestane and Genistein for an Effective Breast Cancer Therapy.

For achieving high effectiveness in the management of breast cancer, coadministration of drugs has attracted a lot of interest as a mode of therapy when compared to a single chemotherapeutic agent that often results in reduced therapeutic end results. Owing to their proven effectiveness, good patient compliance, and lower costs, oral anticancer drugs have received much attention. In the present work, we formulated the chitosan-coated nanoliposomes loaded with two lipophilic agents, namely, exemestane (EXE) and genistein (GEN). The formulation was prepared using the ethanol injection method, which is considered a simple method for getting the nanoliposomes. The formulation was optimized using Box-Behnken design (BBD) and was extensively characterized for particle size, ζ-potential, Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), and X-ray diffraction (XRD) analysis. The sizes of conventional and coated liposomes were found to be 104.6 ± 3.8 and 120.3 ± 6.4 nm with a low polydispersity index of 0.399 and 0.381, respectively. The ζ-potential of the liposomes was observed to be -16.56 mV, which changed to a positive value of +22.4 mV, clearly indicating the complete coating of the nanoliposomes by the chitosan. The average encapsulation efficiency was found to be between 70 and 80% for all prepared formulations. The compatibility of the drug with excipients and complete dispersion of the drug inside the system were verified by FTIR, XRD, and DSC studies. Furthermore, the in vitro release studies concluded the sustained release pattern following the Korsmeyer-Peppas model as the best-fitting model with Fickian diffusion. Ex vivo studies showed better permeation of the chitosan-coated liposomes, which was further confirmed by confocal studies. The prepared chitosan-coated liposomes showed superior antioxidant activity (94.56%) and enhanced % cytotoxicity (IC50 7.253 ± 0.34 µM) compared to the uncoated liposomes. 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay displayed better cytotoxicity of the chitosan-coated nanoliposomes compared to the plain drug, showing the better penetration and enhanced bioavailability of drugs inside the cells. The formulation was found to be safe for administration, which was confirmed using the toxicity studies performed on an animal model. The above data suggested that poorly soluble lipophilic drugs could be successfully delivered via chitosan-coated liposomes for their effective delivery in breast cancer.

An Overview of the Dichotomous Role of Microbiota in Cancer Progression and Management.

It is a well-known fact that cancer is considered the second leading cause of mortality across the globe. Although the human oral cavity and intestine are the natural habitat of thousands of microbes, dysbiosis results in malignancies, such as oral squamous cell carcinoma and colorectal cancer. Amongst the intestinal microbes, H. pylori is a deadly carcinogen. Also, causative pathogens for the development of pancreatic and colorectal cancer are found in the oral cavity, such as Fusobacterium nucleatum and Porphyromonas gingivalis. Many periodontopathic micro- organisms, like Streptococcus sp., Peptostreptococcus sp., Prevotella sp., Fusobacterium sp., Porphyromonas gingivalis, and Capnocytophaga gingivalis, strongly have an impact on the development of oral cancers. Three basic mechanisms are involved in pathogen-mediated cancer development, like chronic inflammation-mediated angiogenesis, inhibition of cellular apoptosis, and release of carcinogenic by-products. Microbiota has a dichotomous role to play in cancer, i.e., microbiota can be used for cancer management too. Shreds of evidence are there to support the fact that microbiota enhances the chemotherapeutic drug efficacy. This review presents the possible mechanism of the oncogenic effect of microbiota with emphasis on the oral microbiome and also attempts to explain the intricate role of microbiota in cancer management.

Nano-based remediation strategies for micro and nanoplastic pollution.

Due to rapid urbanization, there have been continuous environmental threats from different pollutants, especially from microplastics. Plastic products rapidly proliferate significantly contributing to the occurrence of micro-plastics, which poses a significant environmental risk. These microplastics originated from diverse sources and are characterized by their persistent and widespread occurrence; human health and the entire ecosystem are adversely affected by them. The removal of microplastics not only requires innovative technologies but also efficient materials capable of effectively eliminating them from our environment. The progress made so far has highlighted the advantages of utilizing the dimensional and structural properties of nanomaterials to increase the effectiveness of existing methods for micro-plastic treatment, aiming for a more sustainable approach to their removal. In the current review, we demonstrate a thorough overview of the sources, occurrences, and potential harmful effects of microplastics, followed by a further discussion of promising technologies used for their removal. An in-depth examination of both advantages and a few limitations of all these given technologies, including physical, chemical, and biological approaches, has been discussed. Additionally, the review explores the use of nanomaterials as an effective means to overcome obstacles and improve the efficiency of microplastic elimination methods. n conclusion, this review addresses, current challenges in this field and outlines the future perspectives for further research in this domain.

QbD-Assisted Development and Optimization of Doxycycline Hyclate- and Hydroxyapatite-Loaded Nanoparticles for Periodontal Delivery.

The current research aims to develop a carrier system for the delivery of a matrix metalloproteinase (MMP) inhibitor along with a bioceramic agent to the periodontal pocket. It is proposed that the present system, if given along with a systemic antibiotic, would be a fruitful approach for periodontitis amelioration. To fulfill the aforementioned objective, a doxycycline hyclate- and hydroxyapatite-adsorbed composite was prepared by a physical adsorption method and successfully loaded inside sodium alginate-chitosan nanoparticles and optimized based on particle size and drug content. Optimized formulation was then subjected to different evaluation parameters like encapsulation efficiency, hydroxyapatite content, ζ potential, surface morphology, in vitro drug release, cell line studies, and stability studies. For the optimized formulation, particle size, polydispersity index (PDI), entrapment efficiency, ζ potential, and drug content were found to be 336.50 nm, 0.23, 41.77%, -13.85 mV, and 14.00%, respectively. The surface morphology of the placebo and adsorbed composite-loaded nanoparticles as observed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed the spherical shape and rough surface of the particles. In gingival crevicular fluid (GCF) 7.6, a sustained drug release profile was obtained up to 36 h. In vitro % viability studies performed on murine fibroblast cells (NIH3T3) and human periodontal ligament (hPDL) cell lines confirmed the proliferative nature of the formulation. Also, when subjected to stability studies for 4 weeks, particle size, PDI, and drug content did not vary considerably, thereby ensuring the stable nature of nanoparticles. Henceforth, sodium alginate-chitosan nanoparticles appeared to be a good carrier system for doxycycline hyclate and hydroxyapatite for periodontal therapy. If given along with a system antibiotic, the system will serve as a fruitful tool for infection-mediated periodontal regeneration and healing.

A Cross-sectional Survey-based Study of Knowledge, Attitude, and Practice Towards Uses of Cosmetics and Cosmetovigilance in India.

Background: In India, the cosmetics industry has expanded significantly because of changing lifestyles and increased awareness. In terms of earning the most money from the personal care and cosmetics industry in 2021, India is ranked fourth globally. Many cosmetics sold in India include ingredients that cannot be used on humans. Objective: To assess knowledge, attitudes, and practice toward the uses of cosmetics and cosmetovigilance in India. Methods: A cross-sectional study was conducted, from April to May 2022, among the general population living in the Delhi NCR region, India. Study questionnaires (printed and survey link) were distributed in public as well as at workplaces for the survey. Results: Around 268 (54.78%) females and 223 (45.21%) males participated in the survey. Amongst the total respondents - 407 (83%) agreed that they are using cosmetic products on a daily basis, females 229 (85.44%), being the majority users compared to males 178 (80%), with a significant P value = 0.011. Most of the people reported side effects of shampoos - 7.13% (hair fall, hair thinning, dryness of the scalp, itching), followed by allergic reactions to moisturizers - 5.70%. Conclusion: Because of the right safety and effectiveness mentorship of cosmetics, regulatory agencies and stakeholders should adopt this broadly. Cosmetovigilance needs to be put into practice.

Role of excipients in successful development of self-emulsifying/microemulsifying drug delivery system (SEDDS/SMEDDS).

The oral delivery of hydrophobic drug presents a major challenge because of the low aqueous solubility of such compounds. Self-emulsifying/microemulsifying drug delivery system (SEDDS/SMEDDS), which are isotropic mixtures of oils, surfactants, solvents and co-solvents/surfactants, can be used for the design of formulations in order to improve the oral absorption of highly lipophilic drug compounds. The efficiency of oral absorption of said drug from such type of formulation depends on many formulation-related parameters, such as surfactant concentration, oil/surfactant ratio, polarity of the emulsion, droplet size and charge, all of which in essence determine the self-emulsification ability. Thus, only very specific pharmaceutical excipient combinations will lead to efficient self-emulsifying systems. With the growing interest in this field, there is an increasing need for guidelines in excipient selection to obtain effective delivery system with improved bioavailability. The aim of this review is to present the recent approaches in selecting the most appropriate lipid system(s); methods for its characterization and role of various excipients for improved delivery of dosage form.

Quality by Design Assisted Optimization and Risk Assessment of Black Cohosh Loaded Ethosomal Gel for Menopause: Investigating Different Formulation and Process Variables.

Black cohosh (Cimicifuga racemosa) (CR) is a popular herb and is medically lauded for ameliorating myriad symptoms associated with menopause. However, its pharmaceutical limitations and non-availability of a patient-compliant drug delivery approach have precluded its prevalent use. Henceforth, the current research premise is aimed at developing an ethosomal gel incorporating triterpene enriched fraction (TEF) obtained from CR and evaluating its effectiveness through the transdermal application. TEF-loaded ethosomes were formulated using solvent injection, optimized and characterised. The optimized ethosomes were then dispersed into a polymeric gel base to form ethosomal gel which was further compared with the conventional gel by in-vitro and ex-vivo experiments. Here, the quality by design (QbD) approach was exploited for the optimization and development of ethosomal gel. The elements of QbD comprising initial risk assessment, design of experimentation (DoE), and model validation for the development of formulation have all been described in detail. The optimized ethosomes (F03) showed a nanometric size range, negative zeta potential and good entrapment. The in vitro release profile of gel revealed a burst release pattern following the Korsmeyer Peppas model having Fickian diffusion. The transdermal flux of ethosomal gel was observed to be more than that of conventional gel. Texture analysis and rheological characterization of the gel, revealed good strength showing shear thinning and pseudoplastic behaviour. The confocal microscope investigation revealed the deeper skin permeation of ethosomal gel than conventional gel. This result was further strengthened by DSC, IR and histological assessment of the animal skin (Wistar rat), treated with the optimized formulation. Conclusively, the implementation of QbD in the formulation resulted in a better understanding of the process and the product. It aids in the reduction of product variability and defects, hence improving product development efficiencies. Additionally, the ethosomal gel was found to be a more effective and successful carrier for TEF than the conventional gel through the transdermal route. Moreover, this demands an appropriate animal study, which is underway, for a stronger outcome.

Rapid Analytical Method Development and Validation of RP-HPLC Method for the Simultaneous Estimation of Exemestane and Genistein with Specific Application in Lipid-Based Nanoformulations.

Exemestane (EXE), an irreversible aromatase inhibitor, is employed as a therapy for hormone-dependent breast cancer. Several studies have also established the budding effects of genistein (GEN) in various types of cancer such as breast, prostate, as well as skin due to its feeble estrogenic and anti-estrogenic properties. Considering the promising benefits of GEN, it was combined with EXE to accomplish superior therapeutic efficiency with fewer side effects. The quantification of the exact concentration of EXE and GEN when delivered as a combination would be required for which HPLC method was developed and validated. For this purpose, the C18 ODS column having dimensions of 150 × 4.6 mm, 5 µm, using mobile phase A as methanol:water (35:15, v/v), with formic acid (0.01%), and B as acetonitrile (in the ratio of A:B--30:70 v/v) at a flow rate of 1 mL/min was commonly used. The Box-Behnken design was chosen as our experimental model, and the interactions among the independent and dependent variables were analyzed. Parameters like linearity, system suitability, specificity, precision (intra- and interday), robustness, ruggedness, LOD (limit of detection), and LOQ (limit of quantification) were selected for the validation of our proposed method. EXE and GEN were eluted individually at 245 and 270.5 nm, respectively, while both of the agents were determined simultaneously at 256 nm, showing retention time as 2.10 and 1.67 min, respectively, and the calibration plot was observed to be linear in the range of 5-110 µg/mL. Hence, the method that we developed and validated was found to be suitable for the identification of both the drugs simultaneously in combination and in our in-house-developed nanoformulation.