Construction of an Artificial Light-Harvesting System with Efficient Photocatalytic Activity in an Aqueous Solution Based on a FRET-Featuring Metallacage.

Over the past few decades, the design and construction of high-efficiency artificial light-harvesting systems (LHSs) involving multistep fluorescence-resonance energy transfer (FRET) processes have gradually received considerable attention within wide fields ranging from supramolecular chemistry to chemical biology and even materials science. Herein, through coordination-driven self-assembly, a novel tetragonal prismatic metallacage featuring a FRET process using tetraphenylethene (TPE) units as donors and BODIPY units as acceptors has been conveniently synthesized. Subsequently, taking advantage of supramolecular hydrophobic interactions, a promising artificial LHS involving two-step FRET processes from TPE to BODIPY and then to Nile Red (NiR) has been successfully fabricated in an aqueous solution using the FRET-featuring metallacage, NiR, and an amphiphilic polymer (mPEG-DSPE). Notably, this obtained aqueous LHS exhibits highly efficient photocatalytic activity in the dehalogenation of a bromoacetophenone derivate. This study provides a unique strategy for fabricating artificial LHSs in aqueous solutions with multistep FRET processes and further promotes the future development of mimicking the photosynthesis process.

Financial toxicity following surgical treatment for colorectal cancer: a cross-sectional study.

PURPOSE: Financial toxicity has become a global public health issue. The purpose of the study is to investigate and analyze the influencing factors of financial toxicity in patients with non-metastatic colorectal cancer. METHODS: A convenient sample of 250 patients with stage I-III colorectal cancer was investigated in the study. They completed a set of questionnaires, including the Comprehensive Score for Financial Toxicity questionnaire, the Perceived Social Support Scale, and the Hospital Anxiety and Depression Scale. Univariate and multivariate linear regression were performed to investigate the influencing factors of financial toxicity. RESULTS: Over half (52.8%, n = 132) of the colorectal cancer survivors experienced financial toxicity. Multivariate regression analysis showed that the factors associated with financial toxicity were young age, unemployment, low annual household income, chemotherapy, and the lack of sufficient social support (p < 0.05). CONCLUSIONS: Financial toxicity is common among non-metastatic colorectal cancer survivors. Young age, lower annual household income, unemployment, chemotherapy, and insufficient social support were associated with financial toxicity.

Long anterior lens zonules with retinal stripes: a case report.

BACKGROUND: Long anterior lens zonules (LAZs) is a rare disease that was mostly conducted among African Americans. Through the observation of a Chinese patient, we discoverd that the disease may show different characteristics in Asians. CASE PRESENTATION: A patient with vision loss due to a macular hole was found to have several special clinical signs during vitrectomy combined with phacoemulsification and intraocular lens implantation surgery in our hospital, including radially oriented lines on the anterior capsule with pigment, a shallow anterior chamber, slightly high intraocular pressure, and radial retinal stripes in the peripheral retina. Finally, he was diagnosed with long anterior lens zonule syndrome. CONCLUSION: Clinicians need to pay more attention to the rare disease LAZs. It is important to tear the appropriate size of the anterior capsule so as to avoid radial capsular tearing and intraocular lens dislocation.

Orthogonal Self-Assembly of a Two-Step Fluorescence-Resonance Energy Transfer System with Improved Photosensitization Efficiency and Photooxidation Activity.

During the past few decades, fabrication of multistep fluorescence-resonance energy transfer (FRET) systems has become one of the most attractive topics within supramolecular chemistry, chemical biology, and materials science. However, it is challenging to efficiently prepare multistep FRET systems with precise control of the distances between locations and the numbers of fluorophores. Herein we present the successful fabrication of a two-step FRET system bearing specific numbers of anthracene, coumarin, and BODIPY moieties at precise distances and locations through an efficient and controllable orthogonal self-assembly approach based on metal-ligand coordination and host-guest interactions. Notably, the photosensitization efficiency and photooxidation activity of the two-step FRET system gradually increased with the number of energy transfer steps. For example, the two-step FRET system exhibited 1.5-fold higher 1O2 generation efficiency and 1.2-fold higher photooxidation activity than that of its corresponding one-step FRET system. This research not only provides the first successful example of the efficient preparation of multistep FRET systems through orthogonal self-assembly involving coordination and host-guest interactions but also pushes multistep FRET systems toward the application of photosensitized oxidation of a sulfur mustard simulant.

BODIPY-based macrocycles.

During the past few years, the construction of BODIPY-based macrocycles has attracted extensive interest due to the widespread applications of these materials in sensing, bioimaging, molecular machines, and photodynamic therapy (PDT). Since significant progress has been made in this field, it is time to summarize the recent developments involving BODIPY-based macrocycles. In this review, we will briefly introduce the synthesis routes of BODIPY-based macrocycles, including a covalent synthetic protocol and a noncovalent self-assembly protocol. In addition, we will discuss the photophysical and photochemical properties and the applications of these BODIPY-based macrocycles in the areas of sensing, bioimaging, photodynamic therapy, etc.

Compact plasmonic fiber tip for sensitive and fast humidity and human breath monitoring.

We demonstrate a plasmonic fiber tip for relative humidity (RH) detection by integrating a gold nanomembrane onto the end-face of a multimode optical fiber via a flexible and high-efficiency transfer method. Fast water condensation/evaporation is responsible for the high performance of the fiber tip in response to RH. A high sensitivity of 279 pm/%RH is obtained in the range of $ 11\% \sim 92\% {\rm RH} $11%∼92%RH. Taking advantage of the fast dynamics (response and recovery times of 156 ms and 277 ms), the plasmonic fiber tip offers an excellent detection capability to human breaths at varied frequencies and depths. The compact, easy-fabrication, and fast-dynamics plasmonic platform has versatile potential for practical applications, including environmental and healthcare monitoring, as well as biochemical sensing.

Novel multi-analyte responsive ionic supramolecular gels based on pyridinium functionalized-naphthalimide.

A novel ionic supramolecular gel (is-G) is synthesized using N-(pyridinium-4-yl)-naphthalimide (G1) and n-pentanoic acid. By rationally introducing competitive coordination into is-G, two ion coordinated ionic supramolecular gels is-IG and is-FeG (coordinated with I- and Fe3+, respectively) are obtained. is-IG could fluorescently "turn-on" detect Hg2+ and l-Arg with specific selectivity, whereas, is-FeG could accurately identify l-Ser via fluorescence in water. Moreover, ion or amino acid responsive films based on these ionic supramolecular gels are prepared. These ionic supramolecular gels and films could act as multi-analyte detection materials as well as fluorescent display materials.

Localized surface plasmon resonance sensing structure based on gold nanohole array on beveled fiber edge.

This paper proposes a simple, stable, sensitive, and angle-dependent localized surface plasmon resonance (LSPR) sensing structure based on multi-mode optical fiber. We adopted the template transfer method to integrate a nanohole array onto a fiber tip with beveled angle. Experimental results indicated that beveled angle structured probe sensor outperform the flat optical fiber tip structured LSPR sensor in our experiment. We tested the sensitivity and the figure of merit (FOM) of the probe beveled angle from 5°-22°, with refractive index ranging from 1.333-1.385, to find that sensitivity and FOM were optimal at fiber tip bevel angle of 7°, reaching 487 nm/RIU and 29 respectively.

Metabolism studies on prim-O-glucosylcimifugin and cimifugin in human liver microsomes by ultra-performance liquid chromatography quadrupole time-of-flight mass spectrometry.

Prim-O-glucosylcimifugin (PGCN) and cimifugin (CN) are major constituents of Radix Saposhnikoviae that have antipyretic, analgesic and anti-inflammatory pharmacological activities. However, there were few reports with respect to the metabolism of PGCN and CN in vitro. In this paper, we describe a strategy using ultra-performance liquid chromatography quadrupole time-of-flight mass spectrometry (UPLC-Q-TOF-MS) for fast analysis of the metabolic profile of PGCN and CN in human liver microsomes. In total, five phase I metabolites of PGCN, seven phase I metabolites and two phase II metabolites of CN were identified in the incubation of human liver microsomes. The results revealed that the main phase I metabolic pathways of PGCN were hydroxylation and hydrolysis reactions. The phase I metabolic pathways of CN were found to be hydroxylation, demethylation and dehydrogenation. Meanwhile, the results indicated that O-glucuronidation was the major metabolic pathway of CN in phase II metabolism. The specific UDP-glucuronosyltransferase (UGT) enzymes responsible for CN glucuronidation metabolites were identified using recombinant UGT enzymes. The results indicated that UGT1A1, UGT1A9, UGT2B4 and UGT2B7 might play major roles in the glucuronidation of CN. Overall, this study may be useful for the investigation of metabolic mechanism of PGCN and CN, and it can provide reference and evidence for further pharmacodynamic experiments. Copyright © 2016 John Wiley & Sons, Ltd.

Metabolic profile of phillyrin in rats obtained by UPLC-Q-TOF-MS.

Forsythia suspensa Vahl (Oleaceae) is an important original plant in traditional Chinese medicine. The air-dried fruits of Forsythia suspensa have long been used to relieve respiratory symptoms. Phillyrin is one of the main chemical constituent of Forsythia suspensa. A clear understanding of the metabolism of phillyrin is very important in rational clinical use and pharmacological research. In this study, the metabolism of phillyrin in rat was investigated for the first time using an ultra-high-performance liquid chromatography quadrupole time-of-flight mass spectrometry (UPLC-Q-TOF-MS) method. Bile, urine and feces were collected from rats after single-dose (10 mg/kg) orally administered phillyrin. Liquid-liquid extraction and ultrasonic extraction were used to prepare samples. UPLC-Q-TOF-MS analysis of the phillyrin samples showed that phillyrin was converted to a major metabolite, M26, which underwent deglucosidation, further dehydration and desaturation. A total of 34 metabolites were detected including 30 phase I and four phase II metabolites. The conjugation types and structure skeletons of the metabolites were preliminarily determined. Moreover, 28 new metabolites were reported for the first time. The main biotransformation route of phillyrin was identified as hydrolysis, oxidation and sulfation. These findings enhance our understanding of the metabolism and the real active structures of phillyrin. Copyright © 2015 John Wiley & Sons, Ltd.

Plasmonic Fiber Optic Refractometric Sensors: From Conventional Architectures to Recent Design Trends.

Surface Plasmon Resonance (SPR) fiber sensor research has grown since the first demonstration over 20 year ago into a rich and diverse field with a wide range of optical fiber architectures, plasmonic coatings, and excitation and interrogation methods. Yet, the large diversity of SPR fiber sensor designs has made it difficult to understand the advantages of each approach. Here, we review SPR fiber sensor architectures, covering the latest developments from optical fiber geometries to plasmonic coatings. By developing a systematic approach to fiber-based SPR designs, we identify and discuss future research opportunities based on a performance comparison of the different approaches for sensing applications.

Universal sensitivity of propagating surface plasmon resonance in nanostructure arrays.

A universal, geometry-independent sensitivity is derived by using a black box model of surface plasmon excitation for two-dimensional nanostructures. It is shown that the resonant wavelength of surface plasmons and dielectric property of interfacial materials dominate the sensitivity. Sensitivity data of nanostructure arrays, widely collected from independent research groups, comply well with our results. This analysis provides a conceptual and intuitive insight into the plasmonic sensing, covering various excitation arrangements under the same umbrella. The universal sensitivity offers a quantitative tool to evaluate and predict the performance of plasmonic sensors.

Investigating the in vitro stereoselective metabolism of m-nisoldipine enantiomers: characterization of metabolites and cytochrome P450 isoforms involved.

m-Nisoldipine, as a novel 1,4-dihydropyridine calcium ion antagonist, was presented as a couple of enantiomers [(-), (+)-m-nisoldipine]. In this report, the in vitro metabolism of m-nisoldipine enantiomers was investigated in rat liver microsomes (RLM) by the combination of two liquid chromatography mass spectrometric techniques for the first time. The metabolites were separated and assayed by ultra-high performance liquid chromatography coupled to quadrupole time-of-flight mass spectrometry and further identified by comparison of their mass and chromatographic behaviors with reference substances. A total of 18 metabolites of (-)-m-nisoldipine and 16 metabolites of (+)-m-nisoldipine were detected, respectively, which demonstrated that (+)-m-nisoldipine is more metabolically stable than (-)-m-nisoldipine. In addition, the identified metabolic pathways of m-nisoldipine enantiomers were involved in dehydrogenation, oxidation and ester hydrolysis. Afterwards, based on high-performance liquid chromatography coupled to triple quadrupole linear ion trap mass spectrometry, various selective cytochrome P450 (CYP) enzyme inhibitors were employed to evaluate CYP isoforms. The results indicated that the inhibitors of CYP1A1/2, CYP2B1/2, 2D and 2C11 had no obvious inhibitory effects, yet the inhibitor of CYP 3A had a significant inhibitory effect on metabolism of m-nisoldipine enantiomers. This showed that CYP 3A might primarily metabolize m-nisoldipine in RLM.

Clinical and pathogenic characteristics of infectious endophthalmitis in children: A retrospective analysis.

Infective endophthalmitis is an ophthalmic infection that in severe cases can cause complete loss of vision. In children, the defense against infection is low and eye tissue is not fully developed, leading to increased vulnerability to endophthalmitis. Children may be unable to understand the symptoms; thus, developing a method for prevention and treatment of this disease in children is important. Therefore, we analyzed the clinical and pathogenic characteristics of infectious endophthalmitis in children and provided evidence for clinical treatment. The clinical data of 78 children (78 eyes) with infectious endophthalmitis were retrospectively analyzed. The clinical characteristics, pathogen distribution, drug sensitivity, clinical medication, and treatments were summarized and analyzed. In total, 74 (94.87%) had ocular infections caused by trauma and 75 (96.15%) were from rural townships. A total of 108 sterile specimens were examined, with a positive detection rate of 37.04%. The sensitivity rates of Gram-positive cocci and bacilli to vancomycin were 100%. The sensitivity rates of Gram-negative bacilli to ceftazidime, piperacillin/tazobactam, amikacin, gentamicin, ciprofloxacin, and levofloxacin were 100%. Of the 78 patients, 53 (67.95%) received intravitreal injection and 54 (69.23%) underwent vitrectomy. Trauma is the main factor leading to infectious endophthalmitis in children, wherein Gram-positive bacteria are the most common pathogens. Thus, a timely understanding of the pathogen and drug sensitivity is needed. Intravitreal injection and vitrectomy are effective treatments.

Polydopamine-coated bioactive glass for immunomodulation and odontogenesis in pulpitis.

Preserving vital pulp in cases of dental pulpitis is desired but remains challenging. Previous research has shown that bioactive glass (BG) possesses notable capabilities for odontogenic differentiation. However, the immunoregulatory potential of BG for inflamed pulp is still controversial, which is essential for preserving vital pulp in the context of pulpitis. This study introduces a novel approach utilizing polydopamine-coated BG (BG-PDA) which demonstrates the ability to alleviate inflammation and promote odontogenesis for vital pulp therapy. In vitro, BG-PDA has the potential to induce M2 polarization of macrophages, resulting in decreased intracellular reactive oxygen species levels, inhibition of pro-inflammatory factor, and enhancement of anti-inflammatory factor expression. Furthermore, BG-PDA can strengthen the mitochondrial function in macrophages and facilitate odontogenic differentiation of human dental pulp cells. In a rat model of pulpitis, BG-PDA exhibits the capacity to promote M2 polarization of macrophages, alleviate inflammation, and facilitate dentin bridge formation. This study highlights the notable immunomodulatory and odontogenesis-inducing properties of BG-PDA for treating dental pulpitis, as evidenced by both in vitro and in vivo experiments. These results imply that BG-PDA could serve as a promising biomaterial for vital pulp therapy.

Enzyme Immobilization by Inkjet Printing on Reagentless Biosensors for Electrochemical Phosphate Detection.

Enzyme-based biosensors commonly utilize the drop-casting method for their surface modification. However, the drawbacks of this technique, such as low reproducibility, coffee ring effects, and challenges in mass production, hinder its application. To overcome these limitations, we propose a novel surface functionalization strategy of enzyme crosslinking via inkjet printing for reagentless enzyme-based biosensors. This method includes printing three functional layers onto a screen-printed electrode: the enzyme layer, crosslinking layer, and protective layer. Nanomaterials and substrates are preloaded together during our inkjet printing. Inkjet-printed electrodes feature a uniform enzyme deposition, ensuring high reproducibility and superior electrochemical performance compared to traditional drop-casted ones. The resultant biosensors display high sensitivity, as well as a broad linear response in the physiological range of the serum phosphate. This enzyme crosslinking method has the potential to extend into various enzyme-based biosensors through altering functional layer components.

Retinal giant cyst treated by the scleral buckling procedure: A case report.

INTRODUCTION: Retinal cysts are rare lesions of the fundus that are essentially fluid-filled cavities located or originating in the retina, with a diameter larger than the normal retinal thickness. To date, there have been few case reports of giant retinal cyst hemorrhage with retinoschisis. CASE PRESENTATION: A 32-year-old woman with no other medical history complained of decreased vision for 3 days after a severe cough. The best-corrected visual acuity in the right eye was 0.5. A comprehensive ophthalmological examination including slit-lamp fundoscopy, ultrasound scan of the eye, optical coherence tomography scan, and orbital magnetic resonance imaging was performed. Ophthalmological examination revealed grade III anterior chamber blood cells and grade III vitreous hemorrhage in the right eye and a large herpetic cyst on the nasal side of the retina. The cyst projected into the vitreous, with a large amount of hemorrhage vaguely visible within it. The cyst was clearly visible, and a superficial retinal limiting detachment was observed around it. Ultrasound showed a retinal cyst with retinal detachment in the right eye. Laboratory test results were unremarkable. After 3 months of conservative treatment, the patient's intracystic hemorrhage was significantly absorbed, but the size of the cyst cavity did not show any significant change. Scleral buckling with external compression combined with external drainage of the intracystic fluid was performed, the patient's visual acuity was gradually restored to a normal 1.0 after the operation, and the retina appeared flattened. The patient was finally diagnosed with a giant retinal cyst with retinoschisis in the right eye. The presumed cause was heavy coughing leading to rupture and hemorrhage of the retinal cyst, similar to the mechanism of rupture of an arterial dissection. To the best of our knowledge, this case of retinal cyst rupture and hemorrhage caused by heavy coughing with good recovery after external surgical treatment has never been reported before. CONCLUSIONS: Giant cystic retinal hemorrhage with retinoschisis is very rare. Orbital magnetic resonance imaging and ocular B-scan ultrasound are essential for its diagnosis, and the selection of an appropriate surgical procedure is necessary to maximize the benefit for affected patients.

High-fidelity synthesis of microhole templates with low-surface-energy-enabled self-releasing photolithography.

Material patterning through templates has provided an efficient way to meet the critical requirement for surface function in various fields. Here, we develop a self-releasing photolithographic process to make large-area freestanding templates with precise patterns. The low surface energy of substrates by hydrophobic treatment with proper silane modification ensures the template self-releasing. This method eliminates the need of mechanical separation or any sacrificial layers. Major steps including UV exposure and baking are optimized to realize high-quality structures and the final release of templates. The negative photoresists of SU-8 and polyimide are chosen to confirm the feasibility of this process. Wafer-scale freestanding templates with uniform microhole arrays are obtained with high structural fidelity, smooth surfaces and excellent flexibility. The hole size ranges from several to several tens of micrometers with an extremely low variation (<1%). These advantages could promote the application of precisely structured templates for surface patterning in material and surface science.

Heparin-Functionalized Bioactive Glass to Harvest Endogenous Growth Factors for Pulp Regeneration.

Pulp and periapical diseases can lead to the cessation of tooth development, resulting in compromised tooth structure and functions. Despite numerous efforts to induce pulp regeneration, effective strategies are still lacking. Growth factors (GFs) hold considerable promise in pulp regeneration due to their diverse cellular regulatory properties. However, the limited half-lives and susceptibility to degradation of exogenous GFs necessitate the administration of supra-physiological doses, leading to undesirable side effects. In this research, a heparin-functionalized bioactive glass (CaO-P2O5-SiO2-Heparin, abbreviated as PSC-Heparin) with strong bioactivity and a stable neutral pH is developed as a promising candidate to addressing challenges in pulp regeneration. Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and thermogravimetric analysis reveal the successful synthesis of PSC-Heparin. Scanning electron microscopy and X-ray diffraction show the hydroxyapatite formation can be observed on the surface of PSC-Heparin after soaking in simulated body fluid for 12 h. PSC-Heparin is capable of harvesting various endogenous GFs and sustainably releasing them over an extended duration by the enzyme-linked immunosorbent assay. Cytological experiments show that developed PSC-Heparin can facilitate the adhesion, migration, proliferation, and odontogenic differentiation of stem cells from apical papillae. Notably, the histological analysis of subcutaneous implantation in nude mice demonstrates PSC-Heparin is capable of promoting the odontoblast-like layers and pulp-dentin complex formation without the addition of exogenous GFs, which is vital for clinical applications. This work highlights an effective strategy of harvesting endogenous GFs and avoiding the involvement of exogenous GFs to achieve pulp-dentin complex regeneration, which may open a new horizon for regenerative endodontic therapy.

Plasmonic nanohole array sensors fabricated by template transfer with improved optical performance.

Surface plasmon resonance sensors of the nanohole array type provide a promising platform for label-free biosensing on surfaces. For their extensive use, an efficient fabrication procedure to make nanoscale features on metallic films is required. We develop a simple and robust template-transfer approach to structure periodic nanohole arrays in optically thick Au films on poly(dimethylsiloxane) substrates. This technique significantly simplifies the process of sensor fabrication and reduces the cost of the device. A spectral analysis approach is also developed for improving the sensor performance. The sensitivity of the resulting sensor to refractive index change is 522 nm/RIU (refractive index unit) and the resolution is improved to 2 × 10(-5) RIU, which are among the best reported values for localized surface plasmon resonance sensors. We also demonstrate the limit of detection of this sensor for cardiac troponin-I.