Characterization of Channeling Effects Applied to Extended-Release Matrix Tablets Containing Pirfenidone.

Pirfenidone (PRF) is an anti-fibrotic agent that has been approved by the Food and Drug Administration (FDA) for the treatment of mild to moderate idiopathic pulmonary fibrosis. However, the current oral administration dosing regimen of PRF is complex and requires high doses. Patients are instructed to take PRF three times daily, with each dose consisting of up to three capsules or tablets (600 mg/d or 1.8 g/d of PRF) taken with food. To improve the dosing regimen, efforts are being made to develop an extended-release tablet with a zero-order release pattern. In this study, two types of extended-release matrix tablets were compared: non-channeled extended-release matrix tablets (NChMT) and channeled extended-release matrix tablets (ChMT). In vitro release tests, swelling and erosion index, rheology studies, and X-ray microcomputed tomography (XRCT), were conducted. The results indicated that ChMT maintained a zero-order release pattern with a constant release rate, while NChMT exhibited a decreased release rate in the latter half of the dissolution. ChMT exhibited accelerated swelling and erosion compared to other formulations, and this was made possible by the presence of channels within the tablet. These channels allowed for thorough wetting and swelling throughout the entire depth of the tablet. The formation of channels was confirmed through XRCT images. In conclusion, the presence of channels in ChMT tablets increased the rate of swelling and erosion, resulting in a zero-order release pattern. This development offers the potential to improve the dosage of PRF and reduce its associated side effects.

Generation of homogeneous midbrain organoids with in vivo-like cellular composition facilitates neurotoxin-based Parkinson's disease modeling.

Recent studies have demonstrated the generation of midbrain-like organoids (MOs) from human pluripotent stem cells. However, the low efficiency of MO generation and the relatively immature and heterogeneous structures of the MOs hinder the translation of these organoids from the bench to the clinic. Here we describe the robust generation of MOs with homogeneous distribution of midbrain dopaminergic (mDA) neurons. Our MOs contain not only mDA neurons but also other neuronal subtypes as well as functional glial cells, including astrocytes and oligodendrocytes. Furthermore, our MOs exhibit mDA neuron-specific cell death upon treatment with 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine, indicating that MOs could be a proper human model system for studying the in vivo pathology of Parkinson's disease (PD). Our optimized conditions for producing homogeneous and mature MOs might provide an advanced patient-specific platform for in vitro disease modeling as well as for drug screening for PD.

Physicochemical characterization of dapagliflozin and its solid-state behavior in stress stability test.

As an active pharmaceutical ingredient, dapagliflozin propanediol monohydrate (D-PD) has been used in the solvated form consisting of dapagliflozin compounded with (S)-propylene glycol and monohydrate at a 1:1:1 ratio. However, dapagliflozin propanediol loses the solvent's reduced lattice structure at slightly higher temperatures. Due to its sensitive solid-state stability, the temperature and humidity are strictly controlled during the production and storage of dapagliflozin. Thus, crystalline molecular complexes containing pharmaceutical salts, solvates, monohydrates, and cocrystals have recently been developed as alternative strategies. This study investigated the dapagliflozin free base (D-FB), D-PD, and dapagliflozin l-proline cocrystals (D-LP). Their solid-state behavior was also evaluated in stress stability studies. The compounds were analyzed using scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), Fourier-transform infrared (FT-IR) spectroscopy, dynamic vapor sorption (DVS), and powder rheology testing. In addition, Carr's index, the Hausner ratio, contact angle, and intrinsic dissolution rate were calculated. Dapagliflozin exhibited distinct physical properties depending upon the differences in solid form and also showed significant differences in solid-state behavior in the stress stability test. In conclusion, D-LP was superior to D-FB or D-PD in physicochemical and mechanical properties.

Preparation and characterization of metformin hydrochloride controlled-release tablet using fatty acid coated granules.

Metformin hydrochloride (MFM) is often used as a controlled-release (CR) tablet to reduce dosing frequency. However, the MFM CR tablet contains significant amounts of excipients and the tablet size is also large. Dosing convenience and patient compliance can be increased by reducing the size of the CR tablets. The aim of this study was to prepare and evaluate the MFM controlled-release tablet (MFM-CRT) using two types of release modulators, inner and outer. The MFM-CRT was prepared by coating the MFM granules using a binder solution containing aluminum stearate (ALS) as the inner release-modulator, and polyethylene oxide (PEO) as the outer release-modulator. The dispersion stability of the binder solution was optimized by the dispersion analyzer. The MFM-CRT was evaluated for dissolution rate and tablet volume. Additionally, dissolution behavior and dissolution kinetics of the MFM-CRT were analyzed using micro-computed tomography (micro-CT). Although the optimal MFM-CRT showed no difference in the release rate as compared to the commercially available product of Glucophage® XR 500 mg (f2 value: 72), the length of the long axis was reduced by 6 mm and the weight was reduced by about 27%. We expect patient compliance to improve because of effective sustained release and volume reduction of MFM-CRT.

Discrimination of Structural and Immunological Features of Polysaccharides from Persimmon Leaves at Different Maturity Stages.

In this study, we investigated changes in the structural and immunological features of polysaccharides (S1-PLE0, S2-PLE0, and S3-PLE0) extracted from persimmon leaves at three different growth stages. Physicochemical analyses revealed that their chemical compositions, molecular weight distributions, and linkage types differed. High-performance size-exclusion chromatograms showed that the molecular weights of the polysaccharides increased during successive growth stages. In addition, seasonal variation of persimmon leaves affected the sugar compositions and glycosidic linkages in the polysaccharides. S2-PLE0 was composed of comparatively more galactose, arabinose, rhamnose, xylose, and galacturonic acid, showing the presence of ß-glucopyranoside linkages. Significant differences also occurred in their immunostimulatory effects on RAW264.7 macrophages, with respect to which their activities could be ordered as S2-PLE0 > S3-PLE0 > S1-PLE0. Evidently, S2-PLE0 showed the greatest immunostimulatory activity by enhancing the phagocytic capacity and promoting nitric oxide (NO) and cytokines secretion through the upregulation of their gene expression in macrophages. These results suggest that differences in the structural features of polysaccharides according to the different maturity of persimmon leaves might impact their immunostimulatory properties. The results also provide a basis for optimizing persimmon leaf cultivation strategies for food and medical uses of the polysaccharides.

Transcriptome sequencing of gingival biopsies from chronic periodontitis patients reveals novel gene expression and splicing patterns.

BACKGROUND: Periodontitis is the most common chronic inflammatory disease caused by complex interaction between the microbial biofilm and host immune responses. In the present study, high-throughput RNA sequencing was utilized to systemically and precisely identify gene expression profiles and alternative splicing. METHODS: The pooled RNAs of 10 gingival tissues from both healthy and periodontitis patients were analyzed by deep sequencing followed by computational annotation and quantification of mRNA structures. RESULTS: The differential expression analysis designated 400 up-regulated genes in periodontitis tissues especially in the pathways of defense/immunity protein, receptor, protease, and signaling molecules. The top 10 most up-regulated genes were CSF3, MAFA, CR2, GLDC, SAA1, LBP, MME, MMP3, MME-AS1, and SAA4. The 62 down-regulated genes in periodontitis were mainly cytoskeletal and structural proteins. The top 10 most down-regulated genes were SERPINA12, MT4, H19, KRT2, DSC1, PSORS1C2, KRT27, LCE3C, AQ5, and LCE6A. The differential alternative splicing analysis revealed unique transcription variants in periodontitis tissues. The EDB exon was predominantly included in FN1, while exon 2 was mostly skipped in BCL2A1. CONCLUSIONS: These findings using RNA sequencing provide novel insights into the pathogenesis mechanism of periodontitis in terms of gene expression and alternative splicing.

Flavonoids from Machilus japonica stems and their inhibitory effects on LDL oxidation.

Stems of Machilus japonica were extracted with 80% aqueous methanol (MeOH) and the concentrated extract was successively extracted with ethyl acetate (EtOAc), normal butanol (n-BuOH), and water. Six flavonoids were isolated from the EtOAc fraction: (+)-taxifolin, afzelin, (-)-epicatechin, 5,3'-di-O-methyl-(-)-epicatechin, 5,7,3'-tri-O-methyl-(-)-epicatechin, and 5,7-di-O-methyl-3',4'-methylenedioxyflavan-3-ol. The chemical structures were identified using spectroscopic data including NMR, mass spectrometry and infrared spectroscopy. This is the first report of isolation of these six compounds from M. japonica. The compounds were evaluated for their diphenyl picryl hydrazinyl scavenging activity and inhibitory effects on low-density lipoprotein oxidation. Compounds 1 and 3-6 exhibited DPPH antioxidant activity equivalent with that of ascorbic acid, with half maximal inhibitory concentration (IC50) values of 0.16, 0.21, 0.17, 0.15 and 0.07 mM, respectively. The activity of compound 1 was similar to the positive control butylated hydroxytoluene, which had an IC50 value of 1.9 µM, while compounds 3 and 5 showed little activity. Compounds 1, 3, and 5 exhibited LDL antioxidant activity with IC50 values of 2.8, 7.1, and 4.6 µM, respectively.

Pterocarpan-enriched soy leaf extract ameliorates insulin sensitivity and pancreatic ß-cell proliferation in type 2 diabetic mice.

In Korea, soy (Glycine max (L.) Merr.) leaves are eaten as a seasonal vegetable or pickled in soy sauce. Ethyl acetate extracts of soy leaves (EASL) are enriched in pterocarpans and have potent α-glucosidase inhibitory activity. This study investigated the molecular mechanisms underlying the anti-diabetic effect of EASL in C57BL/6J mice with high-fat diet (HFD)-induced type 2 diabetes. Mice were randomly divided into normal diet (ND), HFD (60 kcal% fat diet), EASL (HFD with 0.56% (wt/wt) EASL), and Pinitol (HFD with 0.15% (wt/wt) pinitol) groups. Weight gain and abdominal fat accumulation were significantly suppressed by EASL. Levels of plasma glucose, HbA1c, and insulin in the EASL group were significantly lower than those of the HFD group, and the pancreatic islet of the EASL group had greater size than those of the HFD group. EASL group up-regulated neurogenin 3 (Ngn3), paired box 4 (Pax4), and v-maf musculoaponeurotic fibrosarcoma oncogene homolog A (MafA), which are markers of pancreatic cell development, as well as insulin receptor substrate 1 (IRS1), IRS2, and glucose transporter 4 (GLUT4), which are related to insulin sensitivity. Furthermore, EASL suppressed genes involved in hepatic gluconeogenesis and steatosis. These results suggest that EASL improves plasma glucose and insulin levels in mice with HDF-induced type 2 diabetes by regulating ß-cell proliferation and insulin sensitivity.

Preparation and Evaluation of Inhalable Microparticles with Improved Aerodynamic Performance and Dispersibility Using L-Leucine and Hot-Melt Extrusion.

Dry-powder inhalers (DPIs) are valued for their stability but formulating them is challenging due to powder aggregation and limited flowability, which affects drug delivery and uniformity. In this study, the incorporation of L-leucine (LEU) into hot-melt extrusion (HME) was proposed to enhance dispersibility while simultaneously maintaining the high aerodynamic performance of inhalable microparticles. This study explored using LEU in HME to improve dispersibility and maintain the high aerodynamic performance of inhalable microparticles. Formulations with crystalline itraconazole (ITZ) and LEU were made via co-jet milling and HME followed by jet milling. The LEU ratio varied, comparing solubility, homogenization, and aerodynamic performance enhancements. In HME, ITZ solubility increased, and crystallinity decreased. Higher LEU ratios in HME formulations reduced the contact angle, enhancing mass median aerodynamic diameter (MMAD) size and aerodynamic performance synergistically. Achieving a maximum extra fine particle fraction of 33.68 ± 1.31% enabled stable deep lung delivery. This study shows that HME combined with LEU effectively produces inhalable particles, which is promising for improved drug dispersion and delivery.

Geometry-Driven Fabrication of Mini-Tablets via 3D Printing: Correlating Release Kinetics with Polyhedral Shapes.

The aim of this study was to fabricate mini-tablets of polyhedrons containing theophylline using a fused deposition modeling (FDM) 3D printer, and to evaluate the correlation between release kinetics models and their geometric shapes. The filaments containing theophylline, hydroxypropyl cellulose (HPC), and EUDRAGIT RS PO (EU) could be obtained with a consistent thickness through pre-drying before hot melt extrusion (HME). Mini-tablets of polyhedrons ranging from tetrahedron to icosahedron were 3D-printed using the same formulation of the filament, ensuring equal volumes. The release kinetics models derived from dissolution tests of the polyhedrons, along with calculations for various physical parameters (edge, SA: surface area, SA/W: surface area/weight, SA/V: surface area/volume), revealed that the correlation between the Higuchi model and the SA/V was the highest (R2 = 0.995). It was confirmed that using 3D- printing for the development of personalized or pediatric drug products allows for the adjustment of drug dosage by modifying the size or shape of the drug while maintaining or controlling the same release profile.

Preparation and Evaluation of Inhalable Amifostine Microparticles Using Wet Ball Milling.

The conventional dosage form of Ethyol® (amifostine), a sterile lyophilized powder, involves reconstituting it with 9.7 mL of sterile 0.9% sodium chloride in accordance with the United States Pharmacopeia specifications for intravenous infusion. The purpose of this study was to develop inhalable microparticles of amifostine (AMF) and compare the physicochemical properties and inhalation efficiency of AMF microparticles prepared by different methods (jet milling and wet ball milling) and different solvents (methanol, ethanol, chloroform, and toluene). Inhalable microparticles of AMF dry powder were prepared using a wet ball-milling process with polar and non-polar solvents to improve their efficacy when delivered through the pulmonary route. The wet ball-milling process was performed as follows: AMF (10 g), zirconia balls (50 g), and solvent (20 mL) were mixed and placed in a cylindrical stainless-steel jar. Wet ball milling was performed at 400 rpm for 15 min. The physicochemical properties and aerodynamic characteristics of the prepared samples were evaluated. The physicochemical properties of wet-ball-milled microparticles (WBM-M and WBM-E) using polar solvents were confirmed. Aerodynamic characterization was not used to measure the % fine particle fraction (% FPF) value in the raw AMF. The % FPF value of JM was 26.9 ± 5.8%. The % FPF values of the wet-ball-milled microparticles WBM-M and WBM-E prepared using polar solvents were 34.5 ± 0.2% and 27.9 ± 0.7%, respectively; while the % FPF values of the wet-ball-milled microparticles WBM-C and WBM-T prepared using non-polar solvents were 45.5 ± 0.6% and 44.7 ± 0.3%, respectively. Using a non-polar solvent in the wet ball-milling process resulted in a more homogeneous and stable crystal form of the fine AMF powder than using a polar solvent.

Corrugated surface microparticles with chitosan and levofloxacin for improved aerodynamic performance.

Corrugated surface microparticles comprising levofloxacin (LEV), chitosan and organic acid were prepared using the 3-combo spray drying method. The amount and the boiling point of the organic acid affected the degree of roughness. In this study, we tried to improve the aerodynamic performance and increase aerosolization by corrugated surface microparticle for lung drug delivery efficiency as dry powder inhaler. HMP175 L20 prepared with 175 mmol propionic acid solution was corrugated more than HMF175 L20 prepared with 175 mmol formic acid solution. The ACI and PIV results showed a significant increase in aerodynamic performance of corrugated microparticles. The FPF value of HMP175 L20 was 41.3% ± 3.9% compared with 25.6% ± 7.7% of HMF175 L20. Corrugated microparticles also showed better aerosolization, decreased x-axial velocity, and variable angle. Rapid dissolution of drug formulations was observed in vivo. Low doses administered to the lungs achieved higher LEV concentrations in the lung fluid than high doses administered orally. Surface modification in the polymer-based formulation was achieved by controlling the evaporation rate and improving the inhalation efficiency of DPIs.

Preparation of inhalable N-acetylcysteine-loaded magnetite chitosan microparticles for nitrate adsorption in particulate matter.

Airborne particulate matter has been designated as a class 1 carcinogen by the World Health Organization. Nitrate is a toxic substance that accounts for a large proportion of particulate matter, and nitrate toxicity has long been reported. In this study, we aimed to optimize the adsorption and removal of particulate matter containing nitrate for effective elimination by the lungs. To this end, particles were designed to optimize the inhalation and removal efficiencies. These particles were prepared as chitosan-based particles containing N-acetylcysteine by using emulsion diffusion methods. Chitosan adsorbs nitrate, while N-acetylcysteine dissolves mucus. This removal mechanism has been found to occur in various in vitro models that mimic respiratory environments and in vivo models. In particular, the removal of exogenous substances, such as particulate matter, by the motility of respiratory cilia through mucolytic effect was investigated. This new approach for the adsorption and elimination of toxic substances entering the lungs represents an alternative defense mechanism against exposure to nitrates from air pollution.

Production of Highly Uniform Midbrain Organoids from Human Pluripotent Stem Cells.

Brain organoids have been considered as an advanced platform for in vitro disease modeling and drug screening, but numerous roadblocks exist, such as lack of large-scale production technology and lengthy protocols with multiple manipulation steps, impeding the industrial translation of brain organoid technology. Here, we describe the high-speed and large-scale production of midbrain organoids using a high-throughput screening-compatible platform within 30 days. Micro midbrain organoids (µMOs) exhibit a highly uniform morphology and gene expression pattern with minimal variability. Notably, µMOs show dramatically accelerated maturation, resulting in the generation of functional µMOs within only 30 days of differentiation. Furthermore, individual µMOs display highly consistent responsiveness to neurotoxin, suggesting their usefulness as an in vitro high-throughput drug toxicity screening platform. Collectively, our data indicate that µMO technology could represent an advanced and robust platform for in vitro disease modeling and drug screening for human neuronal diseases.

Irbesartan prevents myocardial remodeling in experimental thyrotoxic cardiomyopathy.

This study evaluated the effects of irbesartan and propranolol on thyroid hormone (TH)-induced cardiac functional and structural remodeling. A rat model of thyrotoxicosis was established by daily intraperitoneal injections of L-thyroxine (T(4), 100 µg/kg) for 4 weeks. Forty Sprague-Dawley rats were randomly divided into four groups (n = 10 each): control group, T(4) group (T(4) alone), T(4) plus irbesartan group (T(4)-Irb, 30 mg/kg), and T(4) plus propranolol group (T(4)-Pro, 0.5mg/mL of drinking water). Cardiac chamber size and functional parameters were measured by echocardiography and cardiomyocyte diameter. Heart rate (HR) and cardiac fibrosis were determined. T(4) alone showed significantly increased HR and cardiomyocyte width (25.0 ± 1.77 vs. 18.8 ± 0.84 µm, P < 0.001) with fibrosis, reduced left ventricle (LV) longitudinal strain (S(long); -16.0 ± 6.27 vs. -22.7 ± 5.19 %, P < 0.001) compared with control. When compared with T(4) alone, T(4)-Irb showed significantly improved LV S(long) (-21.4 ± 1.84 vs. -16.0 ± 6.27 %, P =0.017) and reduced cardiomyocyte width (21.0 ± 1.0 vs. 25.0 ± 1.77 µm, P =0.002) with comparable HR (458.4 ± 24.3 vs. 486.6 ± 30.1 bpm, P = 0.086). However, T(4)-Pro showed significantly reduced HR with improved LV S(long) without alteration of cardiomyocyte width and fibrosis compared with T(4) alone. In conclusion, renin-angiotensin system (RAS) blocking by irbesartan could significantly attenuate TH-induced cardiac structural and functional remodeling. However, HR reduction by propranolol could not alternate structural remodeling, which may implicate the RAS as having an important role in thyrotoxic cardiomyopathy beyond tachycardia.

Determinants of brachial-ankle pulse wave velocity in normotensive young adults with type 2 diabetes mellitus.

Brachial-ankle pulse wave velocity (baPWV) is simple, noninvasive method which correlates well with arterial stiffness. Herein, we assessed the determinants of baPWV in normotensive young adults with type 2 diabetes. We retrospectively enrolled 103 consecutive type 2 diabetic patients aged between 30 and 39 yr who measured baPWV with noninvasive pulse wave analyzer. The anthropometric parameters, blood pressure, pulse rate, fasting plasma glucose, fasting insulin, fasting C-peptide, HbA1c, lipid profile, hs-CRP, albuminuria status, AST/ALT, γ-GTP were checked concurrently. Also, we investigated history of smoking, alcohol drinking and medications by questionnaire. We found that maximal baPWV was positively correlated with mean blood pressure (r = 0.404, P < 0.001), heart rate (r = 0.285, P = 0.004), AST (r = 0.409, P < 0.001), ALT (r = 0.329, P = 0.001), γ-GTP (r = 0.273, P = 0.006), Urine albumin/creatinine ratio (r = 0.321, P = 0.003). By multiple linear regression, mean blood pressure and heart rate were significantly associated with maximal baPWV in male and total group. In female group, mean blood pressure was the only variable associated with maximal baPWV. These factors can be surrogate markers of arterial stiffness in this population.

Thyrotoxic periodic paralysis associated with transient thyrotoxicosis due to painless thyroiditis.

Thyrotoxic periodic paralysis (TPP) is a rare manifestation of hyperthyroidism characterized by muscle weakness and hypokalemia. All ethnicities can be affected, but TPP typically presents in men of Asian descent. The most common cause of TPP in thyrotoxicosis is Graves' disease. However, TPP can occur with any form of thyrotoxicosis. Up to our knowledge, very few cases ever reported the relationship between TPP and painless thyroiditis. We herein report a 25-yr-old Korean man who suffered from flaccid paralysis of the lower extremities and numbness of hands. The patient was subsequently diagnosed as having TPP associated with transient thyrotoxicosis due to painless thyroiditis. The paralytic attack did not recur after improving the thyroid function. Therefore, it is necessary that early diagnosis of TPP due to transient thyrotoxicosis is made to administer definite treatment and prevent recurrent paralysis.

Factors influencing the health-related quality of life in Korean menopausal women: a cross-sectional study based on the theory of unpleasant symptoms.

Purpose: Based on the theory of unpleasant symptoms (TOUS), this study aimed to examine the direct effect of antecedent factors on health-related quality of life (HRQoL) and its indirect effect via symptoms in Korean women during the late menopausal transition (MT) and early postmenopause. Methods: This cross-sectional survey employed a descriptive correlational research design. The respondents were 152 middle-aged women 40 to 60 years with an intermenstrual interval of 60 days or more (late MT) or less than 5 years from the last menstrual period (early postmenopause). The respondents were recruited through convenience sampling in Busan, Korea, from December 1, 2020, to January 31, 2021. Based on the TOUS, self-report data were collected on perceived health status, psychological distress, social support, menopausal symptoms, and HRQoL. The collected data were analyzed using descriptive statics, independent t-test, one-way analysis of variance, Pearson's correlation coefficient, and the Hayes' PROCESS macro. Results: TOUS was supported on this sample (n=152) of Korean women during the late MT and early postmenopause. Perceived health status, psychological distress, and social support had significant direct relationships with HRQoL. Menopausal symptoms had significant indirect relationships between antecedent factors (perceived health status, psychological distress, and social support) and partially mediated HRQoL. Conclusion: The findings of this study indicate that menopausal symptoms play an important role as an intervening factor of HRQoL in women during the late MT and early postmenopause. Therefore, women need an integrated program that manages antecedent factors and menopausal symptoms to improve HRQoL in these menopausal stages.

Inhaled deep eutectic solvent based-nanoemulsion of pirfenidone in idiopathic pulmonary fibrosis.

Pirfenidone (PRF), the first FDA-approved drug to treat idiopathic pulmonary fibrosis (IPF) and formulated as an oral dosage form, has many side effects. To enhance the therapeutic effect, we discovered a high-load nanoemulsion using a novel deep eutectic solvent (DES) and developed an inhalation drug with improved bioavailability. The DES of PRF and N-acetylcysteine were discovered, and their physicochemical properties were evaluated in this study. The mechanism of DES formation was confirmed by FT-IR and 1H NMR and suggested to involve hydrogen bonding. The DES nanoemulsion in which the nano-sized droplets were dispersed is optimized by mixing the DES and distilled water in a ratio. The in vivo pharmacokinetic study showed that the pulmonary route of administration is superior to that of the oral route, and the DES nanoemulsion is superior to that of the PRF solution in achieving better bioavailability and lung distribution. The therapeutic effect of PRF for IPF could be confirmed through in vivo pharmacodynamics studies, including lung function assessment, enzyme-linked immunosorbent assay, histology, and micro-computed tomography using the bleomycin-induced IPF rat model. In addition, the pulmonary route administration of PRF is advantageous in reducing the toxicity risk.

In vivo pharmacokinetic and pharmacodynamic study of co-spray-dried inhalable pirfenidone microparticles in rats.

Pirfenidone (PRF) is the first FDA-approved API in the treatment of idiopathic pulmonary fibrosis (IPF). However, PRF induces serious side effects, such as photophobia and gastrointestinal disorder. PRF inhalation can be expected with a lower effective dose and reduced side effects. In this study, PRF was prepared as inhalable co-spray-dried particles for dry powder inhalation. Mannitol, L-leucine (Leu), and NaCl were used as a stabilizer. The kinds and ratios of stabilizers affecting the physicochemical properties of particles were analyzed, including particle size and surface composition, because of the surface enrichment properties of Leu, the most effective stabilizer. The co-spray-dried PRF and Leu microparticle (SD-PL1:1) have the smallest size and highest aerosol performance. The bioavailability was confirmed by in vivo pharmacokinetics (PK) studies. In addition, in vivo pharmacodynamics (PD) experiments were conducted using a bleomycin-induced IPF rat model. In vivo PK experiments demonstrated that pulmonary administration of SD-PL1:1 was 4 times more effective than the oral route. Similar to the PK results, the therapeutic effect was improved when SD-PL1:1 was administered via the pulmonary route compared to the oral route.