Cardiac regeneration - Past advancements, current challenges, and future directions.

Cardiovascular disease is the leading cause of mortality and morbidity worldwide. Despite improvements in the standard of care for patients with heart diseases, including innovation in pharmacotherapy and surgical interventions, none have yet been proven effective to prevent the progression to heart failure. Cardiac transplantation is the last resort for patients with severe heart failure, but donor shortages remain a roadblock. Cardiac regenerative strategies include cell-based therapeutics, gene therapy, direct reprogramming of non-cardiac cells, acellular biologics, and tissue engineering methods to restore damaged hearts. Significant advancements have been made over the past several decades within each of these fields. This review focuses on the advancements of: 1) cell-based cardiac regenerative therapies, 2) the use of noncoding RNA to induce endogenous cell proliferation, and 3) application of bioengineering methods to promote retention and integration of engrafted cells. Different cell sources have been investigated, including adult stem cells derived from bone marrow and adipose cells, cardiosphere-derived cells, skeletal myoblasts, and pluripotent stem cells. In addition to cell-based transplantation approaches, there have been accumulating interest over the past decade in inducing endogenous CM proliferation for heart regeneration, particularly with the use of noncoding RNAs such as miRNAs and lncRNAs. Bioengineering applications have focused on combining cell-transplantation approaches with fabrication of a porous, vascularized scaffold using biomaterials and advanced bio-fabrication techniques that may offer enhanced retention of transplanted cells, with the hope that these cells would better engraft with host tissue to improve cardiac function. This review summarizes the present status and future challenges of cardiac regenerative therapies.

Developing Eco-Friendly and Cost-Effective Porous Adsorbent for Carbon Dioxide Capture.

To address the issue of global warming and climate change issues, recent research efforts have highlighted opportunities for capturing and electrochemically converting carbon dioxide (CO2). Despite metal doped polymers receiving widespread attention in this respect, the structures hitherto reported lack in ease of synthesis with scale up feasibility. In this study, a series of mesoporous metal-doped polymers (MRFs) with tunable metal functionality and hierarchical porosity were successfully synthesized using a one-step copolymerization of resorcinol and formaldehyde with Polyethyleneimine (PEI) under solvothermal conditions. The effect of PEI and metal doping concentrations were observed on physical properties and adsorption results. The results confirmed the role of PEI on the mesoporosity of the polymer networks and high surface area in addition to enhanced CO2 capture capacity. The resulting Cobalt doped material shows excellent thermal stability and promising CO2 capture performance, with equilibrium adsorption of 2.3 mmol CO2/g at 0 °C and 1 bar for at a surface area 675.62 m2/g. This mesoporous polymer, with its ease of synthesis is a promising candidate for promising for CO2 capture and possible subsequent electrochemical conversion.

Silver nanoparticles decorated eggshell membrane as an effective platform for interference free sensing of dopamine.

In this paper a simple electrochemical sensing of dopamine by a new effective immobilization of tyrosinase (Tyr) enzyme on eggshell membrane (ESM) along with silver nanoparticles (AgNPs) is reported. The modified membrane was characterized by scanning electron microscope (SEM), energy dispersive spectroscopy (EDAX), X-Ray diffraction (XRD). A simple solution based approach was used to prepare AgNPs on biomembrane followed by glutaraldehyde activation to immobilize Tyr on the nanoparticles decorated ESM. The direct electrochemistry of DA oxidation was performed through cyclic voltammetry (CV) and differential pulse voltammetry (DPV). Characterization of membrane was accomplished by electrochemical impedance spectroscopy (EIS). Prepared electrode showed very good stability, reproducibility, high selectivity, easy preparation and regeneration of electrode. The proposed sensor exhibited low detection limits 1.7ngL-1 with wide linear range 10-1000 ngL-1, excellent sensitivity (14.28µA µgL-1cm-2) with good storage and operational stabilities. The accurate measurement of dopamine in blood serum and good recoveries in spiked serum samples ensured great potential for medical diagnostics.

Batch, design optimization, and DNA sequencing study for continuous 1,3-propanediol production from waste glycerol by a soil-based inoculum.

1,3-propanediol (1,3-PD) was produced with a robust fermentation process using waste glycerol feedstock from biodiesel production and a soil-based bacterial inoculum. An iterative inoculation method was developed to achieve independence from soil and selectively breed bacterial populations capable of glycerol metabolism to 1,3-PD. The inoculum showed high resistance to impurities in the feedstock. 1,3-PD selectivity and yield in batch fermentations was optimized by appropriate nutrient compositions and pH control. The batch yield of 1,3-PD was maximized to ~0.7 mol/mol for industrial glycerol which was higher than that for pure glycerin. 16S rDNA sequencing results show a systematic selective enrichment of 1,3-PD producing bacteria with iterative inoculation and subsequent process control. A statistical design of experiments was carried out on industrial glycerol batches to optimize conditions, which were used to run two continuous flow stirred-tank reactor (CSTR) experiments over a period of >500 h each. A detailed analysis of steady states at three dilution rates is presented. Enhanced specific 1,3-PD productivity was observed with faster dilution rates due to lower levels of solvent degeneration. 1,3-PD productivity, specific productivity, and yield of 1.1 g/l hr, 1.5 g/g hr, and 0.6 mol/mol of glycerol were obtained at a dilution rate of 0.1 h(-1)which is bettered only by pure strains in pure glycerin feeds.

Differentiated NSC-34 cells as an in vitro cell model for VX.

The US military has placed major emphasis on developing therapeutics against nerve agents (NA). Current efforts are hindered by the lack of effective in vitro cellular models to aid in the preliminary screening of potential candidate drugs/antidotes. The development of an in vitro cellular model to aid in discovering new NA therapeutics would be highly beneficial. In this regard, we have examined the response of a differentiated hybrid neuronal cell line, NSC-34, to the NA VX. VX-induced apoptosis of differentiated NSC-34 cells was measured by monitoring the changes in caspase-3 and caspase-9 activity post-exposure. Differentiated NSC-34 cells showed an increase in caspase-3 activity in a manner dependent on both time (17-23 h post-exposure) and dose (10-100 nM). The maximal increase in caspase-3 activity was found to be at 20-h post-exposure. Caspase-9 activity was also measured in response to VX and was found to be elevated at all concentrations (10-100 nM) tested. VX-induced cell death was also observed by utilizing annexin V/propidium iodide flow cytometry. Finally, VX-induced caspase-3 or -9 activities were reduced with the addition of pralidoxime (2-PAM), one of the current therapeutics used against NA toxicity, and dizocilpine (MK-801). Overall the data presented here show that differentiated NSC-34 cells are sensitive to VX-induced cell death and could be a viable in vitro cell model for screening NA candidate therapeutics.

Clozapine functions through the prefrontal cortex serotonin 1A receptor to heighten neuronal activity via calmodulin kinase II-NMDA receptor interactions.

Aberrant dopamine release in the prefrontal cortex (PFC) is believed to underlie schizophrenia, but the mechanistic pathway through which a widely used antipsychotic, clozapine (Clz), evokes neurotransmitter-releasing electrical stimulation is unclear. We analyzed Clz-evoked regulation of neuronal activity in the PFC by stimulating axons in layers IV and V and recording the electrical effect in the post-synaptic pyramidal cells of layers II and III. We observed a Clz-evoked increase in population spike (PS), which was mediated by serotonin 1A receptor (5-HT(1A)-R), phospholipase Cß, and Ca(2+)/calmodulin-dependent protein kinase II (CaMKII). Immunoblotting demonstrated that the Clz-activation of CaMKII was 5-HT(1A)-R-mediated. Intriguingly, the NMDA receptor (NMDA-R) antagonist (±)2-amino-5-phosphonovaleric acid (APV) eliminated the Clz-mediated increase in PS, suggesting that the 5-HT(1A)-R, NMDA-R and CaMKII form a synergistic triad, which boosts excitatory post-synaptic potential (EPSP), thereby enhancing PS. In corroboration, Clz as well as NMDA augmented field EPSP (fEPSP), and WAY100635 (a 5-HT(1A)-R antagonist), APV, and a CaMKII inhibitor eliminated this increase. As previously shown, CaMKII binds to the NMDA-R 2B (NR2B) subunit to become constitutively active, thereby inducing α-amino-3-hydroxyl-5-methyl-4-isoxazole-propionate (AMPA) receptor recruitment to the post-synaptic membrane and an increase in fEPSP. Co-immunoprecipitation demonstrated that Clz potentiates interactions among CaMKII, NR2B, and 5-HT(1A)-R, possibly in the membrane rafts of the post-synaptic density (PSD), because pretreatment with methyl-ß-cyclodextrin (MCD), an agent that disrupts rafts, inhibited both co-immunoprecipitation as well as fEPSP. In summary, Clz functions in the PFC by orchestrating a synergism among 5-HT(1A)-R, CaMKII, and NMDA-R, which augments excitability in the PFC neurons of layers II/III.

Hydrogel-Encapsulated Heterogenous Mesoporous Resin Catalyst for In Situ Anti-Cancer Agent Production under Biological Conditions.

A heterogenous Palladium anchored Resorcinol-formaldehyde-hyperbranched PEI mesoporous catalyst, made by one-pot synthesis, was used successfully for in situ Suzuki-Miyaura cross coupling synthesis of anticancer prodrug PP-121 from iodoprazole and boronic ester precursors. The mesoporous catalyst with the non-cytotoxic precursors were tested in 2D in vitro model with excellent cytocompatibility and a strong suppression of PC3 cancer cell proliferation, underscored by 50% reduction in PC3 cells viability and 55% reduction in cell metabolism activity and an enhanced rate of early and late apoptosis in flow cytometry, that was induced only by successful in situ pro drug PP121 synthesis from the precursors. The 3D gelatin methacrylate hydrogel encapsulated in vitro cell models underscored the results with a 52% reduction in cell metabolism and underscored apoptosis of PC3 cells when the Pd anchored catalyst was combined with the precursors. In situ application of Suzuki-Miyaura cross coupling of non-cytotoxic precursors to cancer drug, along with their successful encapsulation in an injectable hydrogel could be applied for tumor point drug delivery strategies that can circumvent deleterious side effects and poor bioavailability chemotherapy routes with concomitant enhanced efficacy.

Therapeutic effects of acrobatic exercise and magnetic field exposure on functional recovery after spinal cord injury in mice.

The effects of acrobatic exercise and magnetic stimulation (MS) in mice applied either separately or in combination while on recovery after spinal cord injury have been investigated. This progress has been compared in six groups of animals. The first two groups consisted of non-injured and injured animals, respectively, which were not exposed to any treatment. The third group included injured animals that participated in an acrobatic exercise and were exposed to MS applied at the frequency of 1 Hz. The animals in the fourth group were exposed to the MS (1 Hz) only, without performing any acrobatic exercises. While the mice in the fifth group participated in the acrobatic exercise and were exposed to MS at 15 Hz, the animals in group six received an acrobatic exercise without exposure to MS. The effects of the treatment were evaluated with the Basso Mouse Scale, the Horizontal Ladder Scale, and the Abnormal Posture Scale. While all groups showed improvement at the end of the study period, the animals that received exercise combined with 1 Hz MS demonstrated the best functional improvement. The animals exposed to the MS applied at a frequency of 15 Hz combined with acrobatic exercise, and those animals that were engaged in exercise and were not exposed to the MS, performed the worst. The area of the spared white matter at the lesion center correlated well with functional recovery and was greatest in the animals that received MS (1 Hz) combined with exercise.

Bioionic Liquid Conjugation as Universal Approach To Engineer Hemostatic Bioadhesives.

Adhesion to wet and dynamic surfaces is vital for many biomedical applications. However, the development of effective tissue adhesives has been challenged by the required combination of properties, which includes mechanical similarity to the native tissue, high adhesion to wet surfaces, hemostatic properties, biodegradability, high biocompatibility, and ease of use. In this study, we report a novel bioinspired design with bioionic liquid (BIL) conjugated polymers to engineer multifunctional highly sticky, biodegradable, biocompatible, and hemostatic adhesives. Choline-based BIL is a structural precursor of the phospholipid bilayer in the cell membrane. We show that the conjugation of choline molecules to naturally derived polymers (i.e., gelatin) and synthetic polymers (i.e., polyethylene glycol) significantly increases their adhesive strength and hemostatic properties. Synthetic or natural polymers and BILs were mixed at room temperature and cross-linked via visible light photopolymerization to make hydrogels with tunable mechanical, physical, adhesive, and hemostatic properties. The hydrogel adhesive exhibits a close to 50% decrease in the total blood volume loss in tail cut and liver laceration rat animal models compared to the control. This technology platform for adhesives is expected to have further reaching application vistas from tissue repair to wound dressings and the attachment of flexible electronics.