Craniofacial risk factors for obstructive sleep apnea-systematic review and meta-analysis.

Obstructive sleep apnea (OSA) is caused by temporary partial or complete constriction of the upper airway during sleep which leads to reduced blood oxygen and cardiovascular risks. Main symptoms vary between adults and children leading to misdiagnosis or delayed patient identification. To improve early diagnosis, lateral cephalograms can provide craniofacial measurements associated with a higher risk of OSA. In order to identify the most relevant craniofacial measurements, a systematic literature review with meta-analysis was conducted combining the terms 'orthodontic*', 'craniofacial', 'cephalometr*', 'cephalogram', 'OSA*', 'UARS', 'SDB', 'sleep disordered breathing', 'sleep apnea' and 'sleep apnoea'. Of 3016 publications, 19 were included in the systematic review and meta-analysis, 15 with adult patients and four with children. A total of 16 measurements (six angles, 10 distances) were compared, nine showed a possible influence in patients with OSA compared to controls: NSBa angle (-0.28°), ANB angle (+0.33°), ML-NSL angle (+0.34°), Me-Go-Ar angle (+0.33°), SN distance (-0.70 mm), N-ANS distance (-0.36 mm), MP-H distance (+1.18 mm), uvula length (+1.07 mm) and thickness (+0.96 mm). Posterior airway measurements were not sufficiently described or comparably measured to be statistically analysed. There is some evidence for altered craniofacial anatomy in patients with OSA compared to controls. Lateral cephalograms should be screened for these aspects routinely to improve early diagnosis of OSA and craniofacial orthopaedics should complement the interdisciplinary treatment plan for young patients with OSA.

Neurocognitive development in isolated Robin sequence treated with the Tuebingen palatal plate.

OBJECTIVES: We aimed to determine the neurocognitive development of cleft palate patients with and without Robin sequence (RS). MATERIALS AND METHODS: Children with isolated RS with cleft palate and children with cleft palate only (CPO) were contacted at the age of 5-6 years. All RS children had undergone initial polygraphic sleep study (PG) with a mixed-obstructive apnea index (MOAI) of ≥ 3/h and were consequently treated with the Tuebingen palatal plate. A standardized clinical examination as well as a neuropediatric and neuropsychological examination included the Wechsler Pre-school and Primary Scale of Intelligence (WPPSI-III), Kaufman Assessment Battery for Children (K-ABC), and an assessment of developmental milestones. RESULTS: In total, 44 children (22RS, 22CPO) were included. RS children were younger at study (70.5 ± 7.3 and 75.2 ± 7.5 months; P = .035). Both groups achieved the evaluated milestones within the normed time frame. WPPSI-III and K-ABC results showed no group differences. Mean values for Verbal IQ (101.8 ± 11.1 vs. 97.1 ± 15.7), Performance IQ (102.9 ± 12.1 vs. 99.6 ± 14.5), Processing Speed Quotient (98.9 ± 15.6 vs. 94.5 ± 15.7), Full-Scale IQ (103.2 ± 12.1 vs. 98.4 ± 15.3), and Sequential Processing Scale (102.1 ± 13.1 vs. 94.2 ± 17.3) were within the reference range (IQ 85-115) for RS and CPO children, respectively, indicating average performance of both groups. CONCLUSION: No neurocognitive, physical, or mental impairments were detected suggesting that RS children having upper airway obstruction (UAO) treated early and effectively may use their potential for an age-appropriate neurocognitive development. CLINICAL RELEVANCE: Tuebingen palatal plate treatment successfully releases UAO. Thus, isolated RS does not necessarily result in developmental delay or an impaired neurocognitive outcome. TRIAL REGISTRATION: Deutsches Register Klinischer Studien, DRKS00006831, https://www.drks.de/drks_web/.

Intraoral scanning of neonates and infants with craniofacial disorders: feasibility, scanning duration, and clinical experience.

OBJECTIVE: The aim of this study was to evaluate intraoral scanning (IOS) in infants, neonates, and small children with craniofacial anomalies for its feasibility, scanning duration, and success rate. Impression taking in vulnerable patients can be potentially life-threatening, with the risk of airway obstruction and aspiration of impression material. The advantage of increasingly digitalized dentistry is demonstrated. MATERIALS AND METHODS: IOS was captured with the Trios 3® (3Shape, Copenhagen, Denmark) intraoral scanner. The underlying disorders were divided into cleft lip and palate (CLP), Trisomy 21 (T21), Robin Sequence (RS), Treacher Collins syndrome (TC), and isolated mandibular retrognathia (MR). Scan data were analysed by scanning duration, number of images, possible correlations of these factors with the different craniofacial disorders, patient age, and relationship between first and subsequent scans. Clinical experiences with the repeated digital impressions are described. RESULTS: Patient data of 141 scans in 83 patients were analysed within an 11-month period. Patients had a median age of 137 days. Median scanning duration was 138 seconds, resulting in a median of 352 images. There was a statistically significant difference in scanning duration (P = 0.001) between infants and neonates. IOS took longest in patients with CLP (537 seconds) and shortest in T21 patients (21 seconds), although there was no statistically significant difference between aetiologies. There was no statistically significant difference between first and subsequent scans in scanning duration. In four cases the IOS had to be repeated, and one patient ultimately required conventional impression taking (all CLP patients; success rate 94%). No severe adverse events occurred. CONCLUSION: IOS is a fast, safe, and feasible procedure for neonates, small children, and infants with craniofacial malformations. One special challenge for both technician and user was identified in patients with CLP, though implementing this new approach of digital impression taking was otherwise found to be highly successful in everyday clinical routine.

An approach to define newborns´ sniffing position using an angle based on reproducible facial landmarks.

BACKGROUND: The neutral or sniffing position is advised for mask ventilation in neonates to avoid airway obstruction. As definitions are manifold and often unspecific, we wanted to investigate the reliability and reproducibility of angle measurements based on facial landmarks that may be used in future clinical trials to determine a hypothetical head position with minimal airway obstruction during mask ventilation. METHODS: In a prospective single-center observational study, 2D sagittal photographs of 24 near-term and term infants were taken, with five raters marking facial landmarks to assess interobserver agreement of those landmarks and angle δ, defined as the angle between the line parallel to the lying surface and the line crossing Subnasale (Sn) and Porion' (P'). Angle δ was assessed in sniffing (δsniff ) and physiologic (δphys ) head position, the former based on a published, yet poorly defined head position where the tip of the nose aligns to the ceiling with the head in a supine, relaxed mid-position. RESULTS: Infants had a mean (SD) gestational age of 37.3 (2.3) weeks. Angle δ could be determined in all 48 images taken in either the sniffing or the physiological head position. Interobserver correlation coefficient was 98.6 for all measurements independent of head position. Angle δsniff was 90.5° (5.7) in the sniffing position. CONCLUSIONS: This study provides a new measuring technique using an angle that is reproducible and reliable and may be used in future studies to correlate head position with airway obstruction.

Acute arthritis of the right temporomandibular joint due to Lyme disease: a case report and literature review.

BACKGROUND: Lyme disease is the most frequent tick-borne infectious disease in Europe. It often presents with a wide variety of symptoms. For this reason, affection of the temporomandibular joint (TMJ) caused by Lyme disease (LD) can be misdiagnosed as a common temporomandibular disorder (TMD). CASE PRESENTATION: The purpose of this case report of a 25-year-old woman presenting to the Departments of Orthodontics and Oral and Maxillofacial Surgery with extensive symptoms of temporomandibular disorder is to illustrate the delayed diagnosis of Lyme disease which was only made after extensive therapy of the temporomandibular joint. The specialist literature only reports a few cases of patients suffering from Lyme disease with TMJ manifestations. CONCLUSION: This case report and the relevant literature review aim to emphasize the importance of accurate request of medical history and differential diagnosis of acute TMJ arthritis and arthralgia. Early interdisciplinary diagnosis of Lyme disease and early antibiotic therapy are essential to avoid misdiagnosis and unnecessary, sometimes invasive, therapies.

[Design and quality control of the oral health status examination in the German National Cohort (GNC)]. / Design und Qualitätskontrolle der zahnmedizinischen Untersuchung in der NAKO Gesundheitsstudie.

BACKGROUND: Caries and periodontitis are highly prevalent worldwide. Because detailed data on these oral diseases were collected within the framework of the German National Cohort (GNC), associations between oral and systemic diseases and conditions can be investigated. OBJECTIVES: The study protocol for the oral examination was designed to ensure a comprehensive collection of dental findings by trained non-dental staff within a limited examination time. At the mid-term of the GNC baseline examination, a first quality evaluation was performed to check the plausibility of results and to propose measures to improve the data quality. MATERIALS AND METHODS: A dental interview, saliva sampling and oral diagnostics were conducted. As part of the level­1 examination, the number of teeth and prostheses were recorded. As part of the level­2 examination, detailed periodontal, cariological and functional aspects were examined. All examinations were conducted by trained non-dental personnel. Parameters were checked for plausibility and variable distributions were descriptively analysed. RESULTS: Analyses included data of 57,967 interview participants, 56,913 level­1 participants and 6295 level­2 participants. Percentages of missing values for individual clinical parameters assessed in level 1 and level 2 ranged between 0.02 and 3.9%. Results showed a plausible distribution of the data; rarely, implausible values were observed, e.g. for measurements of horizontal and vertical overbite (overjet and overbite). Intra-class correlation coefficients indicated differences in individual parameters between regional clusters, study centres and across different examiners. CONCLUSIONS: The results confirm the feasibility of the study protocol by non-dental personnel and its successful integration into the GNC's overall assessment program. However, rigorous dental support of the study centres is required for quality management.

Imaging of temporomandibular joint abnormalities in juvenile idiopathic arthritis with a focus on developing a magnetic resonance imaging protocol.

Inflammation and damage in the temporomandibular joint (TMJ) often develop without clinical symptoms but can lead to severe facial growth abnormalities and impaired health-related quality of life, making early diagnosis of TMJ changes crucial to identify. Inflammatory and osteochondral changes detectable through magnetic resonance imaging (MRI) occur in TMJs of approximately 40% of children with juvenile idiopathic arthritis (JIA), and no other imaging modality or physical method of examination can reliably detect these changes. Therefore contrast-enhanced MRI is the diagnostic standard for diagnosis and interval monitoring of JIA. However the specific usage of MRI for TMJ arthritis is not standardized at present. There is a recognized need for a consensus effort toward standardization of an imaging protocol with required and optional sequences to improve detection of pathological changes and shorten study time. Such a consensus imaging protocol is important for providing maximum information with minimally necessary sequences in a way that allows inter-site comparison of results of clinical trials and improved clinical management. In this paper we describe the challenges of TMJ imaging and present expert-panel consensus suggestions for a standardized TMJ MRI protocol.

No deficit in neurocortical information processing in patients with cleft lip and palate.

BACKGROUND: Cleft lip and palate (CLP) represents the most common malformation of the midfacial region worldwide. It can be suggested that the facial stigmatization, the speech impediment, and the long-standing pressure of treatment cause a range of life stressors. Neurocortical information is influenced by physiological and psychological factors and varies significantly in patients suffering from chronic stress, anxiety, depression, or other psychopathological conditions following maladaptation. The aims of the present study were to investigate the neurocortical information processing of patients with CLP using the contingent negative variation (CNV) paradigm and to evaluate secondary psychopathology, anxiety, and depression. MATERIALS AND METHODS: Twenty-five adults with CLP and 25 healthy volunteers, matched in age and gender, were investigated using recordings of the CNV. Initial CNV (iCNV), late CNV (lCNV), and total CNV (tCNV) as well as habituation slope of the iCNV were determined in each subject. Additionally, each participant had to complete the hospital anxiety and depression questionnaire (HADS) and the Symptom Checklist-90-R (SCL-90-R). RESULTS: Individuals with CLP did not differ significantly from healthy subjects according to any of the CNV parameters investigated. No correlations could be revealed between the measured items and the confounding factors age and gender. Additionally, there were no differences between the groups regarding depression and SCL-90-R; however, anxiety showed significant group differences on a subclinical level. CONCLUSIONS: These data suggest that subjects with CLP show normal neurocortical information processing. It seems likely that CLP and its treatment have no impact on psychosocial functioning and neurophysiological mechanisms of attention. CLINICAL RELEVANCE: The specific living conditions of patients with CLP do not result in disease-specific neurophysiological changes.

Mini-Implant Insertion Using a Guide Manufactured with Computer-Aided Design and Computer-Aided Manufacturing in an Adolescent Patient Suffering from Tooth Eruption Disturbance.

Due to dental diseases, anatomical restrictions, and mixed dentition, the reduction in the number of teeth and the displacement of tooth germs pose challenges in orthodontic treatment, limiting anchorage options. The presented case demonstrates an advanced treatment solution using digital CAD/CAM-technologies and medical imaging for the creation of a mini-implant template. A 12-year-old male patient experiencing delayed tooth eruption, multiple impacted germs, and maxillary constriction underwent intraoral scanning and CBCT. Utilizing coDiagnostiXTM Version 10.2 software, the acquired data were merged to determine the mini-implant placement and to design the template. The template was then manufactured through stereolithography using surgical-guide material. Mini-implants were inserted using the produced appliance, enabling safe insertion by avoiding vital structures. Surgically exposed displaced teeth were aligned using a Hyrax screw appliance anchored on the mini-implants for rapid palatal expansion (RPE) and subsequently used as fixed orthodontics to align impacted teeth. The screw was activated daily for 10 weeks, resulting in a 7 mm posterior and 5 mm anterior maxillary transversal increase. Skeletal anchorage facilitated simultaneous RPE and tooth alignment, ensuring accuracy, patient safety, and appliance stability. The presented case shows a scenario in which computer-aided navigation for mini-implant positioning can enhance precision and versatility in challenging anatomical cases.

Influence of malocclusion and orthodontic treatment in the masticatory efficiency of patients with craniofacial disorders.

This study evaluates masticatory efficiency in orthodontic patients with craniofacial disorders compared to controls without, considering the effect of an orthodontic appliance and malocclusion. A total of 119 participants (7-21 years), divided into a craniofacial disorder and control group (n = 42 and n = 77; mean age 13.5 ± 5.2 and 14.2 ± 3.3 years) were included. Masticatory efficiency was evaluated using a standard food model test, where masticated test food bodies were analyzed, and parameters like particle number (n) and area (mm2) were recorded. This study newly introduced the masticatory efficiency index (MEI), which encompasses the above terms (number and area), with a high MEI being an indicator of high masticatory ability. Younger orthodontic patients with a craniofacial disorder had a significantly decreased MEI (0.50 ± 0.25 n/mm2) compared to patients without (1.10 ± 0.48 n/mm2; p = 0.02). The presence of a crossbite significantly decreased masticatory efficiency, particularly in craniofacial disorder patients (0.69 ± 1.44 n/mm2) versus controls (0.89 ± 1.00 n/mm2, p = 0.04). As treatment progressed with age and fixed appliances, mastication group differences became non-significant, suggesting that patients with a craniofacial disorder were catching up to healthy controls in the rehabilitation of their masticatory function. Considering an early diagnosis of malocclusion during orthodontic therapy in combination with speech therapy can avoid negative malocclusion effects with growth, caused by muscle imbalances.

Prospective cohort study on facial profile changes in infants with Robin sequence and healthy controls.

BACKGROUND: Various conservative and surgical approaches exist to treat Robin sequence (RS), but their effects on facial profile and mandibular catch-up growth are unclear. A functional treatment concept, used in our centre for 25 years, includes an individualized palatal plate with a velo-pharyngeal extension and intensive feeding training. METHODS: We performed a prospective study to objectively describe facial profiles in infants with RS treated with the above concept. Infants with isolated RS were admitted to our tertiary perinatal and national referral centre for craniofacial malformations between May 2018 and Nov 2019. Infants with RS received 3D-photographs during clinically indicated visits. Healthy controls were recruited from Dec 2018 to Sep 2019 and received 3D-photographs every 3 months. The digitally measured jaw index (JI), defined as alveolar overjet (O) x maxillary arch (U)/mandibular arch (L), and the soft tissue reference points A'-point, Nasion', B'-point angle (ANB'), describing the relative position of maxilla to mandible, were evaluated. Linear mixed models were used to examine time trajectories in JI and ANB'. RESULTS: A total of 207 3D images, obtained in 19 infants with RS and 32 controls, were analysed. JI and ANB' decreased over time in both groups [for JI - 0.18 (95% CI - 0.25 to - 0.10); for ANB': - 0.40° per month [(95% CI - 0.48 to - 0.32)]] but remained lower in controls [for JI - 2.5 (95% CI - 3.2 to - 1.8); for ANB'-1.7° (95% CI - 2.4 to - 1.0)]. Also, the ANB' model showed a significant effect of the interaction term diagnosis x age. CONCLUSIONS: Based on longitudinal 3D images, we describe changes in objective parameters of facial profile in infants with and without RS during the first year of life. Our findings indicate catch-up growth in infants treated for RS. Video Abstract.

Lip and tongue movements during phonetic sequences: analysis and definition of normal values.

Precise knowledge of lip and tongue movements is limited. Conventional investigative methods do not allow for their precise representation and analysis. In the present study, electromagnetic articulography (EMA) was used to define normal values for lip movements based on consonant-vowel-consonant (CVC) sequences and for tongue movements based on vowel-consonant-vowel (VCV) sequences. The study population included 25 volunteers (11 males and 14 females) with a median age of 26 (23 to 29) years. An EMA unit was used to conduct the measurements. For this purpose, the volunteers repeated a number of VCV and CVC text sequences 10 times each during two different body positions (upright and relaxed). Statistical analysis (including Bland and Altman's measurement error, non-parametric Wilcoxon rank score testing, and analysis of variance) of distance and time variables resulted in a small measurement error. There was no effect of different body positions on measurement error. Gender was found to have a significant effect on the values measured (67 versus 17 per cent of variables related to distances in CVC versus VCV sequences and 38 versus 75 per cent of variables related to intervals in CVC versus VCV sequences). This finding did not, however, hold true for any of the other parameters investigated as potential influencing factors. EMA is capable of providing valuable information about lip and tongue movements and any pathological dysfunctions involved.

Prospective Evaluation of Children with Robin Sequence following Tübingen Palatal Plate Therapy.

BACKGROUND: To assess the long-term functional orthodontic outcome of the Tübingen palatal plate (TPP) in children with Robin sequence (RS) in comparison to age- and sex-matched healthy controls. METHODS: Between 09/2019 and 10/2020, we performed orthodontic assessments in 41 children at our Department of Orthodontics. Included were patients with RS (17 non-syndromic; four syndromic) and healthy controls (n = 22, average age in both groups 9.9 y). Facial analyses of 2D images, digital study casts and cephalometric measurements were made. RESULTS: The orthodontic examinations showed no statistically significant group differences regarding functional extraoral, intraoral and pharyngeal parameters, or in skeletal patterns. The relationship between the upper and lower incisors was significantly increased (overjet 4 (2-10) vs. 3 (0-9) mm; p = 0.01) with a significant deficit in the lower face proportions (Jaw Index 4.15 (1.9-9.6) vs. 2.98 (0-9); p = 0.02; Facial convexity angle 157 (149-173) vs. 159 (149-170); p = 0.01). CONCLUSION: Children with RS treated with the TPP showed normal long-term functional orthodontic outcomes, thanks to the functional adaption of the stomatognathic system. However, soft tissue growth did not completely match skeletal growth, resulting in a more convex facial profile.

Sleep and neurocognitive outcome in primary school children with Robin Sequence.

STUDY OBJECTIVES: To investigate neurocognitive and behavioral outcomes at primary school age in relation to obstructive sleep apnea (OSA) in children with Robin sequence (RS) treated with the Tuebingen palatal plate in infancy and to assess the impact of OSA in these patients. METHODS: Forty-two primary school-aged children (n = 21 with RS, n = 21 age- and sex-matched controls) underwent polysomnography, intelligence testing ("Wechsler Intelligence Scale for Children-Fifth Edition" [WISC-V]), and anthropometrics. Families completed a 7-day sleep diary and questionnaires on sleep and behavior (Children's Sleep Habits Questionnaire [CSHQ] and the Child Behavior Checklist [CBCL]). RESULTS: In children with RS (17 non-syndromic, four syndromic; median age 9.7 [8.5-10.8] years), the obstructive apnea-hypopnea index (OAHI) was significantly higher than in controls (1.3 [0.4-2.7]/h vs. 0.4 [0.1-0.6]/h). Two syndromic children with RS were already on nocturnal respiratory support for OSA prior to our study, and one non-syndromic child was diagnosed with severe OSA (OAHI 57/h) despite an unremarkable medical history and questionnaire. The overall intelligence quotient in children with RS was within the normal range and did not differ between children with RS and healthy peers (102 vs. 108, p = .05). However, children with RS had values in the at-risk clinical range for externalizing behavior. CONCLUSIONS: These children with RS showed an increased risk of OSA and behavioral problems, suggesting regular screening for OSA throughout childhood. Neurocognitive scores in children with RS were within the normal range after adequate treatment of OSA during infancy.

Masticatory Efficiency in Orthodontic Patients with Craniofacial Disorder.

This study evaluates the masticatory efficiency in patients with craniofacial disorders (CD) compared to controls (C). A total of 119 participants (7-21 years), divided into CD group (n = 42, mean age 13.45 ± 5.2 years) and C group (n = 77, mean age 14.3 ± 3.27 years) under an orthodontic treatment were included. Masticatory efficiency was assessed using a standard food model test. The masticated food was examined according to its number of particles (n) and area (mm2), wherein a higher number of particles alongside a smaller area was an indication of better masticatory efficiency. Additionally, the influence of cleft formation, chewing side, dentition stage, age and sex were evaluated. Patients with CD chewed the standardized food in fewer particles (nCD = 61.76 vs. nC = 84.58), with a significantly higher amount of area than the controls (ACD = 192.91 mm2 vs. AC = 146.84 mm2; p = 0.04). In conclusion, patients with CD showed a significantly decreased mastication efficiency compared to healthy patients. Factors such as stage of cleft formation, chewing side, dentition stage and age showed an influence on masticatory efficiency, whereas no gender effect on the masticatory efficiency of CD patients was found.

Management of Orofacial Manifestations of Juvenile Idiopathic Arthritis: Interdisciplinary Consensus-Based Recommendations.

Involvement of the temporomandibular joint (TMJ) is common in juvenile idiopathic arthritis (JIA). TMJ arthritis can lead to orofacial symptoms, orofacial dysfunction, and dentofacial deformity with negative impact on quality of life. Management involves interdisciplinary collaboration. No current recommendations exist to guide clinical management. We undertook this study to develop consensus-based interdisciplinary recommendations for management of orofacial manifestations of JIA, and to create a future research agenda related to management of TMJ arthritis in children with JIA. Recommendations were developed using online surveying of relevant stakeholders, systematic literature review, evidence-informed generation of recommendations during 2 consensus meetings, and Delphi study iterations involving external experts. The process included disciplines involved in the care of orofacial manifestations of JIA: pediatric rheumatology, radiology, orthodontics, oral and maxillofacial surgery, orofacial pain specialists, and pediatric dentistry. Recommendations were accepted if agreement was >80% during a final Delphi study. Three overarching management principles and 12 recommendations for interdisciplinary management of orofacial manifestations of JIA were outlined. The 12 recommendations pertained to diagnosis (n = 4), treatment of TMJ arthritis (active TMJ inflammation) (n = 2), treatment of TMJ dysfunction and symptoms (n = 3), treatment of arthritis-related dentofacial deformity (n = 2), and other aspects related to JIA (n = 1). Additionally, a future interdisciplinary research agenda was developed. These are the first interdisciplinary recommendations to guide clinical management of TMJ JIA. The 3 overarching principles and 12 recommendations fill an important gap in current clinical practice. They emphasize the importance of an interdisciplinary approach to diagnosis and management of orofacial manifestations of JIA.

Development of Personalized Non-Invasive Ventilation Interfaces for Neonatal and Pediatric Application Using Additive Manufacturing.

The objective of this study was to present a methodology and manufacturing workflow for non-invasive ventilation interfaces (NIV) for neonates and small infants. It aimed to procure a fast and feasible solution for personalized NIV produced in-house with the aim of improving fit and comfort for the patient. Three-dimensional scans were obtained by means of an intraoral (Trios 3) and a facial scanner (3dMd Flex System). Fusion 360 3D-modelling software was employed to automatize the design of the masks and their respective casting molds. These molds were additively manufactured by stereolithography (SLA) and fused filament fabrication (FFF) technologies. Silicone was poured into the molds to produce the medical device. In this way, patient individualized oronasal and nasal masks were produced. An automated design workflow and use of additive manufacturing enabled a fast and feasible procedure. Despite the cost for individualization likely being higher than for standard masks, a user-friendly workflow for in-house manufacturing of these medical appliances proved to have potential for improving NIV in neonates and infants, as well as increasing comfort.

Rinsing postprocessing procedure of a 3D-printed orthodontic appliance material: Impact of alternative post-rinsing solutions on the roughness, flexural strength and cytotoxicity.

OBJECTIVE: The present study evaluated the effect of different rinsing postprocessing solutions on surface characteristics, flexural strength, and cytotoxicity of an additive manufactured polymer for orthodontic appliances. These solutions have been deemed an alternative to the standard isopropanol which is a flammable liquid, known to have toxic effects. METHODS: Tested specimens were manufactured using direct light processing of an orthodontic appliance polymer (FREEPRINT® splint 2.0, Detax) and post-processed with different post-rinsing solutions, including isopropanol (IPA), ethanol (EtOH), EASY 3D Cleaner (EYC), Yellow Magic7 (YM7), and RESINAWAY (RAY), respectively. All groups were post-cured following the manufacturer's instructions. Surface topography and roughness (Ra and Rv) were evaluated. In addition, flexural strength was measured by a three-point bending test. An extract test was performed to evaluate cytotoxicity. The data were analyzed by the Kruskal-Wallis test with Dunn's multiple comparisons test (p < 0.05). RESULTS: Various post-rinsing solutions did not significantly affect the roughness values (Ra and Rv). Specimens post-processed with EtOH (98.1 ± 12.4 MPa) and EYC (101.1 ± 6.3 MPa) exhibited significantly lower flexural strength compared to the groups of IPA (110.7 ± 5.3 MPa), RAY (112.1 ± 5.6 MPa) and YM7 (117.3 ± 5.9 MPa), respectively. Finally, there were no cytotoxic effects of parts cleaned with different post-rinsing solutions. SIGNIFICANCE: Considering the use of 3D-printed orthodontic appliance materials, different rinsing postprocessing procedures did not affect surface characteristics. However, the flexural strength was significantly influenced, which could be attributed to the chemical ingredients of the post-rinsing solutions. Various post-rinsing treatments had no alternation concerning cytocompatibility.

Pierre Robin and breathing: What to do and when?

Robin sequence is characterized by mandibular retrognathia, airway obstruction, and glossoptosis; 80%-90% also have a cleft palate. Various treatment approaches exist, and although controlled studies are rare, objective assessment of treatment outcomes that address the leading clinical issues, namely obstructive sleep apnea and failure to thrive, are essential. Sleep-disordered breathing may be detected using cardiorespiratory polygraphy or polysomnography. Pulse oximetry alone may miss infants with frequent obstructive apneas, yet no intermittent hypoxia. Among conservative treatment options, the Tubingen Palatal Plate with a velar extension shifting the tongue base forward is the only approach that corrects the underlying anatomy and that has undergone appropriate evaluation. Of the surgical treatment options, which are not necessarily the first line of therapy, mandibular distraction osteogenesis (MDO) is effective and has been most extensively adopted. Notwithstanding, it is puzzling that MDO is frequently used in some countries, yet hardly ever in others, despite similar tracheostomy rates. Thus, prospective multicenter studies with side-by-side comparisons aimed at identifying an optimal treatment paradigm for this potentially life-threatening condition are urgently needed.

Automation of Measurements for Personalized Medical Appliances by Means of CAD Software-Application in Robin Sequence Orthodontic Appliances.

Measuring the dimensions of personalized devices can provide relevant information for the production of future such devices used in various medical specialties. Difficulties with standardizing such measurement and obtaining high accuracy, alongside cost-intensive measuring methodologies, has dampened interest in this practice. This study presents a methodology for automatized measurements of personalized medical appliances of variable shape, in this case an orthodontic appliance known as Tübingen Palatal Plate (TPP). Parameters such as length, width and angle could help to standardize and improve its future use. A semi-automatic and custom-made program, based on Rhinoceros 7 and Grasshopper, was developed to measure the device (via an extraoral scanner digital file). The program has a user interface that allows the import of the desired part, where the user is able to select the necessary landmarks. From there, the program is able to process the digital file, calculate the necessary dimensions automatically and directly export all measurements into a document for further processing. In this way, a solution for reducing the time for measuring multiple dimensions and parts while reducing human error can be achieved.