RESUMO
Uranium is a high-value energy element, yet also poses an appreciable environmental burden. The demand for a straightforward, low energy, and environmentally friendly method for encapsulating uranium species can be beneficial for long-term storage of spent uranium fuel and a host of other applications. Leveraging on the low melting point (60 °C) of uranyl nitrate hexahydrate and nanocapillary effect, a uranium compound is entrapped in the hollow core of WS2 nanotubes. Followingly, the product is reduced at elevated temperatures in a hydrogen atmosphere. Nanocrystalline UO2 nanoparticles anchor within the WS2 nanotube lumen are obtained through this procedure. Such methodology can find utilization in the processing of spent nuclear fuel or other highly active radionuclides as well as a fuel for deep space missions. Moreover, the low melting temperatures of different heavy metal-nitrate hydrates, pave the way for their encapsulation within the hollow core of the WS2 nanotubes, as demonstrated herein.
RESUMO
Static satellite-transitions (ST) NMR line shapes from half-integer quadrupolar nuclei could be very informative: they can deliver insight about local motions over a wide range of timescales, and can report on small changes in the local electronic environments as reflected by variations in the quadrupolar parameters. Satellite transitions, however, are typically "invisible" for half-integer quadrupolar nuclei due to their sheer breadth, leading to low signal-to-noise ratio -especially for unreceptive low-gamma or dilute quadrupolar nuclei. Very recently we have introduced a method for enhancing the NMR sensitivity of unreceptive X nuclei in static solids dubbed PROgressive Saturation of the Proton Reservoir (PROSPR), which opens the possibility of magnifying the signals from such spins by repeatedly imprinting frequency-selective X-driven depolarizations on the much more sensitive 1H NMR signal. Here, we show that PROSPR's efficacy is high enough for enabling the detection of static ST NMR for challenging species like 35Cl, 33S and even 17O -all at natural-abundance. The ensuing ST-PROSPR NMR experiment thus opens new approaches to probe ultra-wideline (6-8 MHz wide) spectra. These highly pronounced anisotropies can in turn deliver new vistas about dynamic changes in solids, as here illustrated by tracking ST line shapes as a function of temperature during thermally-driven events.
Assuntos
Imageamento por Ressonância Magnética , Prótons , Espectroscopia de Ressonância Magnética/métodos , AnisotropiaRESUMO
Formation of highly interpenetrated frameworks is demonstrated. An interesting observation is the presence of very large adamantane-shaped cages in a single network, making these crystals new entries in the collection of diamondoid-type metal-organic frameworks (MOFs). The frameworks were constructed by assembling tetrahedral pyridine ligands and copper dichloride. Currently, the networks' degree of interpenetration is among the highest reported and increases when the size of the ligand is increased. Highly interpenetrated frameworks typically have low surface contact areas. In contrast, in our systems, the voids take up to 63 % of the unit cell volume. The MOFs have chiral features but are formed from achiral components. The chirality is manifested by the coordination chemistry around the metal center, the structure of the helicoidal channels, and the motifs of the individual networks. Channels of both handednesses are present within the unit cells. This phenomenon shapes the walls of the channels, which are composed of 10, 16, or 32 chains correlated with the degree of interpenetration 10-, 16-, and 32-fold, respectively. By changing the distance between the center of the ligand and the coordination moieties, we succeeded in tuning the diameter of the channels. Relatively large channels were formed, having diameters up to 31.0â Å×14.8â Å.
RESUMO
A protocol for successfully depositing [001] textured, 2−3 µm thick films of Al0.75Sc0.25N, is proposed. The procedure relies on the fact that sputtered Ti is [001]-textured α-phase (hcp). Diffusion of nitrogen ions into the α-Ti film during reactive sputtering of Al0.75,Sc0.25N likely forms a [111]-oriented TiN intermediate layer. The lattice mismatch of this very thin film with Al0.75Sc0.25N is ~3.7%, providing excellent conditions for epitaxial growth. In contrast to earlier reports, the Al0.75Sc0.25N films prepared in the current study are Al-terminated. Low growth stress (<100 MPa) allows films up to 3 µm thick to be deposited without loss of orientation or decrease in piezoelectric coefficient. An advantage of the proposed technique is that it is compatible with a variety of substrates commonly used for actuators or MEMS, as demonstrated here for both Si wafers and D263 borosilicate glass. Additionally, thicker films can potentially lead to increased piezoelectric stress/strain by supporting application of higher voltage, but without increase in the magnitude of the electric field.
RESUMO
MgAl2O4 spinel is widely studied in many fields of material science because of its variety of interesting properties and potential applications. The influence of cation disorder on the physical properties of MgAl2O4 makes understanding of the effects related to this disorder particularly important. It is known that, upon ion irradiation at low temperature, MgAl2O4 undergoes an order-disorder phase transition followed by amorphization. This paper reports a combined high resolution X-ray diffraction and transmission electron microscopy study elucidating the linkage between this phase transition and irradiation-induced elastic strain. Irradiations were carried out on [110] and [111]-oriented single crystals of MgAl2O4 at T = 77 K with 600 keV Xe ions over a wide range of doses. The data suggests that the beginning of the order-disorder phase transition coincides with the beginning of strain relaxation. This result indicates that the volume of the new phase is slightly smaller than that of the unirradiated spinel. The dose at which the phase transformation occurs is found to be dependent on the crystal orientation, which can be attributed to both elastic and crystallographic properties.
RESUMO
Numerous bio-organisms employ template-assisted crystallization of molecular solids to yield crystal morphologies with unique optical properties that are difficult to reproduce synthetically. Here, a facile procedure is presented to deposit bio-inspired birefringent crystals of xanthine derivatives on a template of single-crystal quartz. Crystalline sheets that are several millimeters in length, several hundred micrometers in width, and 300-600 nm thick, are obtained. The crystal sheets are characterized with a well-defined orientation both in and out of the substrate plane, giving rise to high optical anisotropy in the plane parallel to the quartz surface, with a refractive index difference Δn ≈ 0.25 and a refractive index along the slow axis of n ≈ 1.7. It is further shown that patterning of the crystalline stripes with a tailored periodic grating leads to a thin organic polarization-dependent diffractive meta-surface, opening the door to the fabrication of various optical devices from a platform of small-molecule based organic dielectric crystals.
RESUMO
Herein, we obtained two supramolecular assemblies with layered structures from melamine, N-methylmelamine, and hexynyl-cyanuric acid in water. By combination of X-ray diffraction, electron microscopy, and molecular dynamics studies, we found that introducing one methyl group in melamine alters the arrangement of the layers in these structures.
RESUMO
As a major component in the nuclear fuel cycle, octoxide uranium is subjected to intensive nuclear forensics research. Scientific efforts have been mainly dedicated to determine signatures, allowing for clear and distinct attribution. The oxygen isotopic composition of octoxide uranium, acquired during the fabrication process of the nuclear fuel, might serve as a signature. Hence, understanding the factors governing the final oxygen isotopic composition and the chemical systems in which U3O8 was produced may develop a new fingerprint concerning the history of the material and/or the process to which it was subjected. This research determines the fractionation of oxygen isotopes at different temperatures relevant to the nuclear fuel cycle in the system of U3O8 and atmospheric O2. We avoid the retrograde isotope effect at the cooling stage at the end of the fabrication process of U3O8. The system attains the isotope equilibrium at temperatures higher than 300 °C. The average δ18O values of U3O8 in equilibrium with atmospheric oxygen have been found to span over a wide range, from -9.90 at 300 °C up to 18.40 at 800 °C. The temperature dependency of the equilibrium fractionation (1000 ln αU3O8-atm. O2 ) exhibits two distinct regions, around -33 between 300 °C and -500 °C and -5 between 700 °C and -800 °C. The sharp change coincides with the transition from a pseudo-hexagonal structure to a hexagonal structure. A depletion trend in δ18O is associated with the orthorhombic structure and may result from the uranium mass effect, which might also play a role in the depletion of 5 versus atmospheric oxygen at high temperatures.
RESUMO
Surface-guided growth has proven to be an efficient approach for the production of nanowire arrays with controlled orientations and their large-scale integration into electronic and optoelectronic devices. Much has been learned about the different mechanisms of guided nanowire growth by epitaxy, graphoepitaxy, and artificial epitaxy. A model describing the kinetics of surface-guided nanowire growth has been recently reported. Yet, many aspects of the surface-guided growth process remain unclear due to a lack of its observation in real time. Here we observe how surface-guided nanowires grow in real time by in situ scanning electron microscopy (SEM). Movies of ZnSe surface-guided nanowires growing on periodically faceted substrates of annealed M-plane sapphire clearly show how the nanowires elongate along the substrate nanogrooves while pushing the catalytic Au nanodroplet forward at the tip of the nanowire. The movies reveal the timing between competing processes, such as planar vs nonplanar growth, catalyst-selective vapor-liquid-solid elongation vs nonselective vapor-solid thickening, and the effect of topographic discontinuities of the substrate on the growth direction, leading to the formation of kinks and loops. Contrary to some observations for nonplanar nanowire growth, planar nanowires are shown to elongate at a constant rate and not by jumps. A decrease in precursor concentration as it is consumed after long reaction time causes the nanowires to shrink back instead of growing, thus indicating that the process is reversible and takes place near equilibrium. This real-time study of surface-guided growth, enabled by in situ SEM, enables a better understanding of the formation of nanostructures on surfaces.
RESUMO
Gd-doped CeO(2) exhibits an anomalously large electrostriction effect generating stress that can reach 500 MPa. In situ XANES measurements indicate that the stress develops in response to the rearrangement of cerium-oxygen vacancy pairs. This mechanism is fundamentally different from that of materials currently in use and suggests that Gd-doped ceria is a representative of a new family of high-performance electromechanical materials.