The electrocatalytic activity for the hydrogen evolution reaction on alloys is determined by element-specific adsorption sites rather than d-band properties.

Trends of the electrocatalytic activities for the hydrogen evolution reaction (HER) across transition metals are typically explained by d-band properties such as center or upper edge positions in relation to Fermi levels. Here, the universality of this relation is questioned for alloys, exemplified for the AuPt system which is examined with electrocatalytic measurements and density functional theory (DFT) calculations. At small overpotentials, linear combinations of the pure-metals' Tafel kinetics normalized to the alloy compositions are found to precisely resemble the measured HER activities. DFT calculations show almost neighbor-independent adsorption energies on Au and Pt surface-sites, respectively, as the adsorbed hydrogen influences the electron density mostly locally at the adsorption site itself. In contrast, the density of states of the d-band describe the delocalized conduction electrons in the alloys, which are unable to portray the local electronic environments at adsorption sites and related bonding strengths. The adsorption energies at element-specific surface sites are related to overpotential-dependent reaction mechanisms in a multidimensional reinterpretation of the volcano plot for alloys, which bridges the found inconsistencies between activity and bonding strength descriptors of the common electrocatalytic theory for alloys.

Entropy-Mediated Stable Structural Evolution of Prussian White Cathodes for Long-Life Na-Ion Batteries.

The high-entropy approach is applied to monoclinic Prussian White (PW) Na-ion cathodes to address the issue of unfavorable multilevel phase transitions upon electrochemical cycling, leading to poor stability and capacity decay. A series of Mn-based samples with up to six metal species sharing the N-coordinated positions was synthesized. The material of composition Na1.65 Mn0.4 Fe0.12 Ni0.12 Cu0.12 Co0.12 Cd0.12 [Fe(CN)6 ]0.92 □0.08 ⋅ 1.09H2 O was found to exhibit superior cyclability over medium/low-entropy and conventional single-metal PWs. We also report, to our knowledge for the first time, that a high-symmetry crystal structure may be advantageous for high-entropy PWs during battery operation. Computational comparisons of the formation enthalpy demonstrate that the compositionally less complex materials are prone to phase transitions, which negatively affect cycling performance. Based on data from complementary characterization techniques, an intrinsic mechanism for the stability improvement of the disordered PW structure upon Na+ insertion/extraction is proposed, namely the dual effect of suppression of phase transitions and mitigation of gas evolution.

Achieving and Stabilizing Uranyl Bending via Physical Pressure.

Applying physical pressure in the uranyl-sulfate system has resulted in the formation of the first purely inorganic uranyl oxo-salt phase with a considerable uranyl bend: Na4[(UO2)(SO4)3]. In addition to a strong bend of the typically almost linear O═U═O, the typically equatorial plane is broken up by two out-of-plane oxygen positions. Computational investigations show the origin of the bending to lie in the applied physical pressure and not in the electronic influence or steric hindrance. The increase in pressure onto the system has been shown to increase uranyl bending. Furthermore, the phase formation is compared with a reference phase of a similar structure without uranyl bending, and a transition pressure of 2.5 GPa is predicted, which is well in agreement with the experimental results.

Tilting and Distortion in Rutile-Related Mixed Metal Ternary Uranium Oxides: A Structural, Spectroscopic, and Theoretical Investigation.

A systematic investigation examining the origins of structural distortions in rutile-related ternary uranium AUO4 oxides using a combination of high-resolution structural and spectroscopic measurements supported by ab initio calculations is presented. The structures of ß-CdUO4, MnUO4, CoUO4, and MgUO4 are determined at high precision by using a combination of neutron powder diffraction (NPD) and synchrotron X-ray powder diffraction (S-XRD) or single crystal X-ray diffraction. The structure of ß-CdUO4 is best described by space group Cmmm whereas MnUO4, CoUO4, and MgUO4 are described by the lower symmetry Ibmm space group and are isostructural with the previously reported ß-NiUO4 [Murphy et al. Inorg. Chem. 2018, 57, 13847]. X-ray absorption spectroscopy (XAS) analysis shows all five oxides contain hexavalent uranium. The difference in space group can be understood on the basis of size mismatch between the A2+ and U6+ cations whereby unsatisfactory matching results in structural distortions manifested through tilting of the AO6 polyhedra, leading to a change in symmetry from Cmmm to Ibmm. Such tilts are absent in the Cmmm structure. Heating the Ibmm AUO4 oxides results in reduction of the tilt angle. This is demonstrated for MnUO4 where in situ S-XRD measurements reveal a second-order phase transition to Cmmm near T = 200 °C. Based on the extrapolation of variable temperature in situ S-XRD data, CoUO4 is predicted to undergo a continuous phase transition to Cmmm at ∼1475 °C. Comparison of the measured and computed data highlights inadequacies in the DFT+U approach, and the conducted analysis should guide future improvements in computational methods. The results of this investigation are discussed in the context of the wider AUO4 family of oxides.

The Structure of the Electric Double Layer of the Protic Ionic Liquid [Dema][TfO] Analyzed by Atomic Force Spectroscopy.

Protic ionic liquids are promising electrolytes for fuel cell applications. They would allow for an increase in operation temperatures to more than 100 °C, facilitating water and heat management and, thus, increasing overall efficiency. As ionic liquids consist of bulky charged molecules, the structure of the electric double layer significantly differs from that of aqueous electrolytes. In order to elucidate the nanoscale structure of the electrolyte-electrode interface, we employ atomic force spectroscopy, in conjunction with theoretical modeling using molecular dynamics. Investigations of the low-acidic protic ionic liquid diethylmethylammonium triflate, in contact with a platinum (100) single crystal, reveal a layered structure consisting of alternating anion and cation layers at the interface, as already described for aprotic ionic liquids. The structured double layer depends on the applied electrode potential and extends several nanometers into the liquid, whereby the stiffness decreases with increasing distance from the interface. The presence of water distorts the layering, which, in turn, significantly changes the system's electrochemical performance. Our results indicate that for low-acidic ionic liquids, a careful adjustment of the water content is needed in order to enhance the proton transport to and from the catalytic electrode.

Unprecedented Inversion of Selectivity and Extraordinary Difference in the Complexation of Trivalent f†Elements by Diastereomers of a Methylated Diglycolamide.

When considering f elements, solvent extraction is primarily used for the removal of lanthanides from ore and their recycling, as well as for the separation of actinides from used nuclear fuel. Understanding the complexation mechanism of metal ions with organic extractants, particularly the influence of their molecular structure on complex formation is of fundamental importance. Herein, we report an extraordinary (up to two orders of magnitude) change in the extraction efficiency of f elements with two diastereomers of dimethyl tetraoctyl diglycolamide (Me2 -TODGA), which only differ in the orientation of a single methyl group. Solvent extraction techniques, extended X-ray absorption fine structure (EXAFS) measurements, and density functional theory (DFT) based ab initio calculations were used to understand their complex structures and to explain their complexation mechanism. We show that the huge differences observed in extraction selectivity results from a small change in the complexation of nitrate counter-ions caused by the different orientation of one methyl group in the backbone of the extractant. The obtained results give a significant new insight into metal-ligand complexation mechanisms, which will promote the development of more efficient separation techniques.

Controlling Oxygen Defect Formation and Its Effect on Reversible Symmetry Lowering and Disorder-to-Order Phase Transformations in Nonstoichiometric Ternary Uranium Oxides.

In situ synchrotron powder X-ray diffraction measurements have demonstrated that the isostructural AUO4- x ( A = alkaline earth metal cation) oxides CaUO4- x and α-Sr0.4Ca0.6UO4- x undergo a reversible phase transformation under reducing conditions at high temperatures associated with the ordering of in-plane oxygen vacancies resulting in the lowering of symmetry. When rhombohedral (space group R3̅ m) CaUO4- x and α-Sr0.4Ca0.6UO4- x are heated to 450 and 400 °C, respectively, in a hydrogen atmosphere, they undergo a first-order phase transformation to a single phase structure which can be refined against a triclinic model in space group P1̅, δ-CaUO4- x and δ-Sr0.4Ca0.6UO4- x, where the oxygen vacancies are disordered initially. Continued heating results in the appearance of superlattice reflections, indicating the ordering of in-plane oxygen vacancies. Cooling ordered δ-CaUO4- x and δ-Sr0.4Ca0.6UO4- x to near room temperature results in the reformation of the disordered rhombohedral phases. Essential to the transformation is the generation of a critical amount of oxygen vacancies. Once these are formed, the transformation can be accessed continuously through thermal cycling, showing that the transformations are purely thermodynamic in origin. Stoichiometric structures of both oxides can be recovered by heating oxygen deficient CaUO4- x and α-Sr0.4Ca0.6UO4- x under pure oxygen to high temperatures. When heated in air, the amount of oxygen vacancy defects that form in CaUO4- x and α-Sr0.4Ca0.6UO4- x are found to correlate with the A site composition. The inclusion of the larger Sr2+ cation on the A site reduces defect-defect interactions, which increases the amount of defects that can form and lowers their formation temperature. The relative difference in the amount of defects that form can be understood on the basis of oxygen vacancy and U5+ disordering as shown by both ab initio calculations and estimated oxygen vacancy formation energies based on thermodynamic considerations. This difference in defect-defect interactions consequently introduces variations in the long-range ordered anionic lattice of the δ phases despite the isostructural relationship of the α structures of CaUO4- x and Sr0.4Ca0.6UO4- x. These results are discussed with respect to the influence the A site cation has upon anion defect formation and ordering and are also compared to δ-SrUO4- x, the only other material known to be able to undergo a reversible symmetry lowering and disorder-to-order transformation with increasing temperature.

A Spectroscopic and Computational Study of Cm3+ Incorporation in Lanthanide Phosphate Rhabdophane (LnPO4·0.67H2O) and Monazite (LnPO4).

This study investigates the incorporation of the minor actinide curium (Cm3+) in a series of synthetic La1- xGd xPO4 ( x = 0, 0.24, 0.54, 0.83, 1) monazite and rhabdophane solid-solutions. To obtain information on the incorporation process on the molecular scale and to understand the distribution of the dopant in the synthetic phosphate phases, combined time-resolved laser fluorescence spectroscopy and X-ray absorption fine structure spectroscopy investigations were conducted and complemented with ab initio atomistic simulations. We found that Cm3+ is incorporated in the monazite endmembers (LaPO4 and GdPO4) on one specific, highly ordered lattice site. The intermediate solid-solutions, however, display increasing disorder around the Cm3+ dopant as a result of random variations in nearest neighbor distances. In hydrated rhabdophane, and especially its La-rich solid-solutions, Cm3+ is preferentially incorporated on nonhydrated lattice sites. This site occupancy is not in agreement with the hydrated rhabdophane structure, where two-thirds of the lattice sites are associated with water of hydration (LnPO4·0.67H2O), implying that structural substitution reactions cannot be predicted based on the structure of the host matrix only.

Dehydration of the Uranyl Peroxide Studtite, [UO2(η2-O2)(H2O)2]·2H2O, Affords a Drastic Change in the Electronic Structure: A Combined X-ray Spectroscopic and Theoretical Analysis.

The minerals studtite, [UO2(η2-O2)(H2O)2]·2H2O, and metastudtite, [UO2(η2-O2)(H2O)2], are uranyl peroxide minerals that are major oxidative alteration phases of UO2 under conditions of geological storage. The dehydration of studtite has been studied using X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy. XPS of the U 4f region shows small but significant differences between studtite and metastudtite, with the 4f binding energy of studtite being the highest reported for a uranyl mineral studied by this technique. Further information about the changes in the electronic structure was elucidated using U M4-edge high-energy resolution X-ray absorption near-edge structure (HR-XANES) spectroscopy, which directly probes f orbital states. The transition from the 3d to 5fσ* orbital is sensitive to variations in the U═Oaxial bond length and to changes in the bond covalency. We report evidence that the covalence in the uranyl fragment decreases upon dehydration. Photoluminescence spectroscopy at near-liquid helium temperatures reveals significant spectral differences between the two materials, correlating with the X-ray spectroscopy results. A theoretical investigation has been conducted on the structures of both studtite and metastudtite and benchmarked to the HR-XANES spectra. These illustrate the sensitivity of the 3d to 5f σ* transition toward U═Oaxial bond variation. Small structural changes upon dehydration have been shown to have an important electronic effect on the uranyl fragment.

Unexpected Crystallographic Phase Transformation in Nonstoichiometric SrUO4- x: Reversible Oxygen Defect Ordering and Symmetry Lowering with Increasing Temperature.

In situ synchrotron powder X-ray diffraction measurements have demonstrated that SrUO4 undergoes a reversible phase transformation under reducing conditions at high temperatures, associated with the ordering of oxygen defects resulting in a lowering of crystallographic symmetry. When substoichiometric rhombohedral α-SrUO4- x, in space group R3̅ m with disordered in-plane oxygen defects, is heated above 200 °C in a hydrogen atmosphere it undergoes a first order phase transformation to a (disordered) triclinic polymorph, δ-SrUO4- x, in space group P1̅. Continued heating to above 450 °C results in the appearance of superlattice reflections, due to oxygen-vacancy ordering forming an ordered structure δ-SrUO4- x. Cooling δ-SrUO4- x toward room temperature results in the reformation of the rhombohedral phase α-SrUO4- x with disordered defects, confirming the reversibility of the transformation. This suggests that the transformation, resulting from oxygen vacancy ordering, is not a consequence of sample reduction or decomposition, but rather represents a change in the energetics of the system. A strong reducing atmosphere is required to generate a critical amount of oxygen defects in α-SrUO4- x to enable the transformation to δ-SrUO4- x but once formed the transformation between these two phases can be induced by thermal cycling. The structure of δ-SrUO4- x at 1000 °C was determined using symmetry representation analysis, with the additional reflections indexed to a commensurate distortion vector k = ⟨1/4 1/4 3/4⟩. The ordered 2D layered triclinic structure of δ-SrUO4- x can be considered a structural distortion of the disordered 2D layered rhombohedral α-SrUO4- x structure through the preferential rearrangement of the in-plane oxygen vacancies. Ab initio calculations using density functional theory with self-consistently derived Hubbard U parameter support the assigned ordered defect superstructure model. Entropy changes associated with the temperature dependent short-range ordering of the reduced U species are believed to be important and these are discussed with respect to the results of the ab initio calculations.

Giant Volume Change and Topological Gaps in Temperature- and Pressure-Induced Phase Transitions: Experimental and Computational Study of ThMo2 O8.

By applying high temperature (1270 K) and high pressure (3.5 GPa), significant changes occur in the structural volume and crystal topology of ThMo2 O8 , allowing the formation of an unexpected new ThMo2 O8 polymorph (high-temperature/high-pressure (HT/HP) orthorhombic ThMo2 O8 ). Compared with the other three ThMo2 O8 polymorphs prepared at the ambient pressure (monoclinic, orthorhombic, and hexagonal phases), the molar volume for the quenched HT/HP-orthorhombic ThMo2 O8 is decreased by almost 20 %. As a result of such a dramatic structural transformation, a permanent high-pressure quenchable state is able to be sustained when the pressure is released. The crystal structures of the three ambient ThMo2 O8 phases are based on three-dimensional (3D) frameworks constructed from corner-sharing ThOx (x=6, 8, or 9) polyhedra and MoO4 tetrahedra. The HT/HP-orthorhombic ThMo2 O8 , however, crystallizes in a novel structural topology, exhibiting very dense arrangements of ThO11 and MoO4+1 polyhedra connecting along the crystallographic c axis. The phase transitions among all four of these ThMo2 O8 polymorphs are unveiled and fully characterized with regard to the structural transformation, thermal stability, and vibrational properties. The complementary first principles calculations of Gibbs free energies reveal the underlying energetics of the phase transition, which support the experimental findings.

Nonstoichiometry in Strontium Uranium Oxide: Understanding the Rhombohedral-Orthorhombic Transition in SrUO4.

In situ neutron and synchrotron X-ray diffraction studies demonstrate that SrUO4 acts as an oxygen transfer agent, forming oxygen vacancies under both oxidizing and reducing conditions. Two polymorphs of SrUO4 are stable at room temperature, and the transformation between these is observed to be associated with thermally regulated diffusion of oxygen ions, with partial reduction of the U(6+) playing a role in both the formation of oxygen deficient α-SrUO4-δ and its subsequent transformation to stoichiometric ß-SrUO4. This is supported by ab initio calculations using density functional theory calculations. The oxygen vacancies play a critical role in the first order transition that SrUO4 undergoes near 830 °C. The changes in the oxidation states and U geometry associated with the structural phase transition have been characterized using X-ray absorption spectroscopy, synchrotron X-ray diffraction, and neutron diffraction.

Performance of DFT+U method for prediction of structural and thermodynamic parameters of monazite-type ceramics.

We performed a density functional theory (DFT) study of the monazite-type ceramics using DFT+U method, where the Hubbard U parameters are derived ab initio, with the main goal in testing the predictive power of this computational method for modeling of f-electron materials that are of interest in nuclear waste management. We show that DFT+U approach with PBEsol as the exchange-correlation functional significantly improves description of structures and thermodynamic parameters of lanthanide-bearing oxides and monazites over commonly used standard DFT (PBE) approach. We found that it is essential to use the Hubbard U parameter derived for a given element and a given structure to reproduce the structural parameters of the measured materials. We obtained exceptionally good description of the structural parameters with U parameter derived using the linear response approach of Cococcioni and de Gironcoli (Phys. Rev. B 2005, 71, 035105). This shows that affordable methods, such as DFT+U with a clever choice of exchange-correlation functional and the Hubbard U parameter can lead to a good description of f-electron materials.

Highly distorted uranyl ion coordination and one/two-dimensional structural relationship in the Ba2[UO2(TO4)2] (T = P, As) system: an experimental and computational study.

Uranium compounds α-Ba2[UO2(PO4)2] (1), ß-Ba2[UO2(PO4)2] (2), and Ba2[UO2(AsO4)2] (3) were synthesized by H3BO3/B2O3 flux reactions, though boron is not incorporated into the structures. Phases 1 and 2 are topologically identical, but 1 is heavily distorted with respect to 2. An unusual UO7 pentagonal bipyramid occurs in 1, exhibiting a highly distorted equatorial configuration and significant bending of the uranyl group, due to edge-sharing with one neighboring PO4(3-) tetrahedron. Compound 2 contains more normal square bipyramids that share corners with four neighboring PO4(3-) tetrahedra, but the uranyl cation UO2(2+) is tilted relative to the equatorial plane. Experimental evidence as well as density functional theory (DFT) calculations suggest that 1 is more stable than 2. In theory, 1 and 2 can interconvert by forming/releasing the shared edge between the uranyl polyhedron and the phosphate tetrahedron. Similar fundamental building blocks in ß-Ba2[UO2(PO4)2] and Ba2[UO2(AsO4)2] indicate a possible evolution of uranyl-based structures from chain to layer type and formation of an accretional series.

Benchmarking the DFT+U method for thermochemical calculations of uranium molecular compounds and solids.

Ability to perform a feasible and reliable computation of thermochemical properties of chemically complex actinide-bearing materials would be of great importance for nuclear engineering. Unfortunately, density functional theory (DFT), which on many instances is the only affordable ab initio method, often fails for actinides. Among various shortcomings, it leads to the wrong estimate of enthalpies of reactions between actinide-bearing compounds, putting the applicability of the DFT approach to the modeling of thermochemical properties of actinide-bearing materials into question. Here we test the performance of DFT+U method--a computationally affordable extension of DFT that explicitly accounts for the correlations between f-electrons - for prediction of the thermochemical properties of simple uranium-bearing molecular compounds and solids. We demonstrate that the DFT+U approach significantly improves the description of reaction enthalpies for the uranium-bearing gas-phase molecular compounds and solids and the deviations from the experimental values are comparable to those obtained with much more computationally demanding methods. Good results are obtained with the Hubbard U parameter values derived using the linear response method of Cococcioni and de Gironcoli. We found that the value of Coulomb on-site repulsion, represented by the Hubbard U parameter, strongly depends on the oxidation state of uranium atom. Last, but not least, we demonstrate that the thermochemistry data can be successfully used to estimate the value of the Hubbard U parameter needed for DFT+U calculations.

A radiochemical lab-on-a-chip paired with computer vision to unlock the crystallization kinetics of (Ba,Ra)SO4.

(Ra,Ba)SO4 solid solutions are commonly encountered as problematic scales in subsurface energy-related applications, e.g., geothermal systems, hydraulic fracturing, conventional oil and gas, etc. Despite its relevance, its crystallization kinetics were never determined because of radium (226), high radioactivity (3.7 × 1010 Bq g-1), and utilization in contemporary research, therefore constrained to trace amounts (< 10-8 M) with the composition of BaxRa1-xSO4 commonly restricted to x > 0.99. What if lab-on-a-chip technology could create new opportunities, enabling the study of highly radioactive radium beyond traces to access new information? In this work, we developed a lab-on-a-chip experiment paired with computer vision to evaluate the crystal growth rate of (Ba,Ra)SO4 solid solutions. The computer vision algorithm enhances experimental throughput, yielding robust statistical insights and further advancing the efficiency of such experiments. The 3D analysis results of the precipitated crystals using confocal Raman spectroscopy suggested that {210} faces grew twice as fast as {001} faces, mirroring a common observation reported for pure barite. The crystal growth rate of (Ba0.5Ra0.5)SO4 follows a second-order reaction with a kinetic constant equal to (1.23 ± 0.09) × 10-10 mol m-2 s-1.

Low-spin state of Fe in Fe-doped NiOOH electrocatalysts.

Doping with Fe boosts the electrocatalytic performance of NiOOH for the oxygen evolution reaction (OER). To understand this effect, we have employed state-of-the-art electronic structure calculations and thermodynamic modeling. Our study reveals that at low concentrations Fe exists in a low-spin state. Only this spin state explains the large solubility limit of Fe and similarity of Fe-O and Ni-O bond lengths measured in the Fe-doped NiOOH phase. The low-spin state renders the surface Fe sites highly active for the OER. The low-to-high spin transition at the Fe concentration of ~ 25% is consistent with the experimentally determined solubility limit of Fe in NiOOH. The thermodynamic overpotentials computed for doped and pure materials, η = 0.42 V and 0.77 V, agree well with the measured values. Our results indicate a key role of the low-spin state of Fe for the OER activity of Fe-doped NiOOH electrocatalysts.

Vibrational mode frequencies of H4SiO4, D4SiO4, H6Si2O7, and H6Si3O9 in aqueous environment, obtained from ab initio molecular dynamics.

We report the vibrational properties of H(4)SiO(4), D(4)SiO(4), H(6)Si(2)O(7), and H(6)Si(3)O(9) in aqueous solution at 300 K and 1000 K, obtained from the combination of ab initio molecular dynamics (MD) and a mode-decomposition approach. This combination yields vibrational subspectra for selected vibrational modes at finite temperatures. We also performed normal-mode analysis (NMA) on numerous configurations from the same MD run to sample the effect of the variable molecular environment. We found good agreement between both approaches. The strongest effect of temperature is on the SiOH bending mode δSiOH, which is at about 1145 cm(-1) in solution at 300 K, opposed to about 930 cm(-1) in solution at 1000 K. The frequency of the δSiOH vibration also depends on environment, shifting from 1145 cm(-1) in solution to about 845 cm(-1) in the gas-phase. We found both in the mode-decomposition approach and in multiple-configuration NMA that the H(6)Si(2)O(7) dimer shows a vibrational mode at about 790 cm(-1), which we consider to be responsible for a hitherto unexplained shoulder of the monomer Raman band at 770 cm(-1) in dilute silica solutions. Our results demonstrate the importance of temperature and solvation environment in calculations that aim to support the interpretation of experimental Raman spectra of dissolved silica.

Monazite-Type SmPO4 as Potential Nuclear Waste Form: Insights into Radiation Effects from Ion-Beam Irradiation and Atomistic Simulations.

Single-phase monazite-type ceramics are considered as potential host matrices for the conditioning of separated plutonium and minor actinides. Sm-orthophosphates were synthesised and their behaviour under irradiation was investigated with respect to their long-term performance in the repository environment. Sintered SmPO4 pellets and thin lamellae were irradiated with 1, 3.5, and 7 MeV Au ions, up to fluences of 5.1 × 1014 ions cm-2 to simulate ballistic effects of recoiling nuclei resulting from α-decay of incorporated actinides. Threshold displacement energies for monazite-type SmPO4 subsequently used in SRIM/TRIM simulations were derived from atomistic simulations. Raman spectra obtained from irradiated lamellae revealed vast amorphisation at the highest fluence used, although local annealing effects were observed. The broadened, but still discernible, band of the symmetrical stretching vibration in SmPO4 and the negligible increase in P-O bond lengths suggest that amorphisation of monazite is mainly due to a breaking of Ln-O bonds. PO4 groups show structural disorder in the local environment but seem to behave as tight units. Annealing effects observed during the irradiation experiment and the distinctively lower dose rates incurred in actinide bearing waste forms and potential α-radiation-induced annealing effects indicate that SmPO4-based waste forms have a high potential for withstanding amorphisation.

Understanding the role of flux, pressure and temperature on polymorphism in ThB2O5.

A novel polymorph of ThB2O5, denoted as ß-ThB2O5, was synthesised under high-temperature high-pressure (HT/HP) conditions. Via single crystal X-ray diffraction measurements, ß-ThB2O5 was found to form a three-dimensional (3D) framework structure where thorium atoms are ten-fold oxygen coordinated forming tetra-capped trigonal prisms. The only other known polymorph of ThB2O5, denoted α, synthesised herein using a known borax, B2O3-Na2B4O7, high temperature solid method, was found to transform to the ß polymorph when exposed to conditions of 4 GPa and ∼900 °C. Compared to the α polymorph, ß-ThB2O5 has smaller molar volume by approximately 12%. Exposing a mixture of the α and ß polymorphs to HT/HP conditions ex situ further demonstrated the preferred higher-pressure phase being ß, with no α phase material being observed via Rietveld refinements against laboratory X-ray powder diffraction (PXRD) measurements. In situ heating PXRD measurements on α-ThB2O5 from RT to 1030 °C indicated that α-ThB2O5 transforms to the ß variant at approximately 900 °C via a 1st order mechanism. ß-ThB2O5 was found to exist only over a narrow temperature range, decomposing above 1050 °C. Ab initio calculations using density functional theory (DFT) with the Hubbard U parameter indicated, consistent with experimental observations, that ß is both the preferred phase at higher temperatures and high pressures. Interestingly, it was found by switching from B2O3-Na2B4O7 to H3BO3-Li2CO3 flux using consistent high temperature solid state conditions for the synthesis of the α variant, ß-ThB2O5 could be generated. Comparison of their single crystal measurements showed this was identical to that obtained from HT/HP conditions.