Electrosynthesis of Verdoheme and Biliverdin Derivatives Following Enzymatic Pathways.

Artificial syntheses of biologically active molecules have been fruitful in many bioinspired catalysis applications. Specifically, verdoheme and biliverdin, bearing polypyrrole frameworks, have inspired catalyst designs to address energy and environmental challenges. Despite remarkable progress in benchtop synthesis of verdoheme and biliverdin derivatives, all reported syntheses, starting from metalloporphyrins or inaccessible biliverdin precursors, require multiple steps to achieve the final desired products. Additionally, such synthetic procedures use multiple reactants/redox agents and involve multistep purification/extraction processes that often lower the yield. However, in a single step using atmospheric oxygen, heme oxygenases selectively generate verdoheme or biliverdin from heme. Motivated by such enzymatic pathways, we report a single-step electrosynthesis of verdoheme or biliverdin derivatives from their corresponding meso-aryl-substituted metalloporphyrin precursors. Our electrosynthetic methods have produced a copper-coordinating verdoheme analog in >80% yield at an applied potential of 0.65 V vs ferrocene/ferrocenium in air-exposed acetonitrile solution with a suitable electrolyte. These electrosynthetic routes reached a maximum product yield within 8 h of electrolysis at room temperature. The major products of verdoheme and biliverdin derivatives were isolated, purified, and characterized using electrospray mass spectrometry, absorption spectroscopy, cyclic voltammetry, and nuclear magnetic resonance spectroscopy techniques. Furthermore, X-ray crystallographic data were collected for select cobalt (Co)- and Cu-chelating verdoheme and metal-free biliverdin products. Electrosynthesis routes for the selective modification at the macrocycle ring in a single step are not known yet, and therefore, we believe that this report would advance the scopes of electrosynthesis strategies.

Catalytically Relevant Organocopper(III) Complexes Formed through Aryl-Radical-Enabled Oxidative Addition.

Stepwise oxidative addition of copper(I) complexes to form copper(III) species via single electron transfer (SET) events has been widely proposed in copper catalysis. However, direct observation and detailed investigation of these fundamental steps remain elusive owing largely to the typically slow oxidative addition rate of copper(I) complexes and the instability of the copper(III) species. We report herein a novel aryl-radical-enabled stepwise oxidative addition pathway that allows for the formation of well-defined alkyl-CuIII species from CuI complexes. The process is enabled by the SET from a CuI species to an aryl diazonium salt to form a CuII species and an aryl radical. Subsequent iodine abstraction from an alkyl iodide by the aryl radical affords an alkyl radical, which then reacts with the CuII species to form the alkyl-CuIII complex. The structure of resultant [(bpy)CuIII(CF3)2(alkyl)] complexes has been characterized by NMR spectroscopy and X-ray crystallography. Competition experiments have revealed that the rate at which different alkyl iodides undergo oxidative addition is consistent with the rate of iodine abstraction by carbon-centered radicals. The CuII intermediate formed during the SET process has been identified as a four-coordinate complex, [CuII(CH3CN)2(CF3)2], through electronic paramagnetic resonance (EPR) studies. The catalytic relevance of the high-valent organo-CuIII has been demonstrated by the C-C bond-forming reductive elimination reactivity. Finally, localized orbital bonding analysis of these formal CuIII complexes indicates inverted ligand fields in σ(Cu-CH2) bonds. These results demonstrate the stepwise oxidative addition in copper catalysis and provide a general strategy to investigate the elusive formal CuIII complexes.

Copper-Carbon Homolysis Competes with Reductive Elimination in Well-Defined Copper(III) Complexes.

Despite the recent advancements of Cu catalysis for the cross-coupling of alkyl electrophiles and the frequently proposed involvement of alkyl-Cu(III) complexes in such reactions, little is known about the reactivity of these high-valent complexes. Specifically, although the reversible interconversion between an alkyl-CuIII complex and an alkyl radical/CuII pair has been frequently proposed in Cu catalysis, direct observation of such steps in well-defined CuIII complexes remains elusive. In this study, we report the synthesis and investigation of alkyl-CuIII complexes, which exclusively undergo a Cu-C homolysis pathway to generate alkyl radicals and CuII species. Kinetic studies suggest a bond dissociation energy of 28.6 kcal/mol for the CuIII-C bonds. Moreover, these four-coordinate complexes could be converted to a solvated alkyl-CuIII-(CF3)2, which undergoes highly efficient C-CF3 bond-forming reductive elimination even at low temperatures (-4 °C). These results provide strong support for the reversible recombination of alkyl radicals with CuII to form alkyl-CuIII species, an elusive step that has been proposed in Cu-catalyzed mechanisms. Furthermore, our work has demonstrated that the reactivity of CuIII complexes could be significantly influenced by subtle changes in the coordination environment. Lastly, the observation of the highly reactive neutral alkyl-CuIII-(CF3)2 species (or with weakly bound solvent molecules) suggests they might be the true intermediates in many Cu-catalyzed trifluoromethylation reactions.

Methyl Effects on the Stereochemistry and Reactivity of PPP-Ligated Iron Hydride Complexes.

Iron dihydride complexes are key intermediates in many iron-catalyzed reactions. Previous efforts to study molecules of this type have led to the discovery of a remarkably stable cis-FeH2 complex, which is supported by bis[2-(diisopropylphosphino)phenyl]phosphine (iPrPPHP) along with CO. In this work, the hydrogen on the central phosphorus has been replaced with a methyl group, and the corresponding iron carbonyl dichloride, hydrido chloride, and dihydride complexes have been synthesized. The addition of the methyl group favors the anti configuration for the Me-P-Fe-H moiety and the trans geometry for the H-Fe-CO motif, which is distinctively different from the iPrPPHP system. Furthermore, it increases the thermal stability of the dihydride complex, cis-(iPrPPMeP)Fe(CO)H2 (iPrPPMeP = bis[2-(diisopropylphosphino)phenyl]methylphosphine). The variations in stereochemistry and compound stability contribute greatly to the differences between the two PPP systems in reactions with PhCHO, CS2, and HCO2H.

On the Demise of PPP-Ligated Iron Catalysts in the Formic Acid Dehydrogenation Reaction.

The PPP-ligated iron complexes, cis-(iPrPPRP)FeH2(CO) [iPrPPRP = (o-iPr2PC6H4)2PR (R = H or Me)], catalyze the dehydrogenation of formic acid to carbon dioxide but lose their catalytic activity over time. This study focuses on the analysis of the species formed from the degradation of cis-(iPrPPMeP)FeH2(CO) over its course of catalyzing the dehydrogenation reaction. These degradation products include species both soluble and insoluble in the reaction medium. The soluble component of the decomposed catalyst is a mixture of cis-[(iPrPPMeP)FeH(CO)2][(HCO2)(HCO2H)x], protonated iPrPPMeP, and oxidation products resulting from adventitious O2. The precipitate is solvated Fe(OCHO)2. Further mechanistic investigation suggests that cis-[(iPrPPMeP)FeH(CO)2][(HCO2)(HCO2H)x] displays diminished but measurable catalytic activity, likely through the displacement of a CO ligand by the formate ion. The formation of Fe(OCHO)2 along with the dissociation of iPrPPMeP is responsible for the eventual loss of catalytic activity.

Unraveling the Solid-State Photoreactivity of Carbonylbis(4,1-Phenylene)dicarbonazidate with Laser Flash Photolysis.

Solid-state photoreactions are generally controlled by the rigid and ordered nature of crystals. Herein, the solution and solid-state photoreactivities of carbonylbis(4,1-phenylene)dicarbonazidate (1) were investigated to elucidate the solid-state reaction mechanism. Irradiation of 1 in methanol yielded primarily the corresponding amine, whereas irradiation in the solid state gave a mixture of photoproducts. Laser flash photolysis in methanol showed the formation of the triplet ketone (TK) of 1 (τ ∼ 99 ns), which decayed to triplet nitrene 31N (τ ∼ 464 ns), as assigned by comparison to its calculated spectrum. Laser flash photolysis of a nanocrystalline suspension and diffuse reflectance laser flash photolysis also revealed the formation of TK of 1 (τ ∼ 106 ns) and 31N (τ ∼ 806 ns). Electron spin resonance spectroscopy and phosphorescence measurements further verified the formation of 31N and the TK of 1, respectively. In methanol, 31N decays by H atom abstraction. However, in the solid state, 31N is sufficiently long lived to thermally populate its singlet configuration (11N). Insertion of 11N into the phenyl ring to produce oxazolone competes with 31N cleavage to form a radical pair. Notably, 1 did not exhibit photodynamic behavior, likely because the photoreaction occurs only on the crystal surfaces.

A Bridge too Far? Comparison of Transition Metal Complexes of Dibenzyltetraazamacrocycles with and without Ethylene Cross-Bridges: X-ray Crystal Structures, Kinetic Stability, and Electronic Properties.

Tetraazamacrocycles, cyclic molecules with four nitrogen atoms, have long been known to produce highly stable transition metal complexes. Cross-bridging such molecules with two-carbon chains has been shown to enhance the stability of these complexes even further. This provides enough stability to use the resulting compounds in applications as diverse and demanding as aqueous, green oxidation catalysis all the way to drug molecules injected into humans. Although the stability of these compounds is believed to result from the increased rigidity and topological complexity imparted by the cross-bridge, there is insufficient experimental data to exclude other causes. In this study, standard organic and inorganic synthetic methods were used to produce unbridged dibenzyl tetraazamacrocycle complexes of Co, Ni, Cu, and Zn that are analogues of known cross-bridged tetraazamacrocycles and their transition metal complexes to allow direct comparison of molecules that are identical except for the cross-bridge. The syntheses of the known tetraazamacrocycles and the new transition metal complexes were successful with high yields and purity. Initial chemical characterization of the complexes was conducted by UV-Visible spectroscopy, while cyclic voltammetry showed more marked differences in electronic properties from bridged versions. Direct comparison studies of the unbridged and bridged compounds' kinetic stabilities, as demonstrated by decomposition using high acid concentration and elevated temperature, showed that the cyclen-based complex stability did not benefit from cross-bridging. This is likely due to poor complementarity with the Cu2+ ion while cyclam-based complexes benefited greatly. We conclude that ligand-metal complementarity must be maintained in order for the topological and rigidity constraints imparted by the cross-bridge to contribute significantly to complex robustness.

Earth Abundant Oxidation Catalysts for Removal of Contaminants of Emerging Concern from Wastewater: Homogeneous Catalytic Screening of Monomeric Complexes.

Twenty novel Mn, Fe, and Cu complexes of ethylene cross-bridged tetraazamacrocycles with potentially copolymerizable allyl and benzyl pendant arms were synthesized and characterized. Multiple X-ray crystal structures demonstrate the cis-folded pseudo-octahedral geometry forced by the rigidifying ethylene cross-bridge and show that two cis coordination cites are available for interaction with substrate and oxidant. The Cu complexes were used to determine kinetic stability under harsh acidic and high-temperature conditions, which revealed that the cyclam-based ligands provide superior stabilization with half-lives of many minutes or even hours in 5 M HCl at 50-90 °C. Cyclic voltammetry studies of the Fe and Mn complexes reveal reversible redox processes indicating stabilization of Fe2+/Fe3+ and Mn2+/Mn3+/Mn4+ oxidation states, indicating the likelihood of catalytic oxidation for these complexes. Finally, dye-bleaching experiments with methylene blue, methyl orange, and rhodamine B demonstrate efficient catalytic decolorization and allow selection of the most successful monomeric catalysts for copolymerization to produce future heterogeneous water purification materials.

Iron Dihydride Complex Stabilized by an All-Phosphorus-Based Pincer Ligand and Carbon Monoxide.

PNP-pincer-stabilized iron carbonyl dihydride complexes are key intermediates in catalytic hydrogenation and dehydrogenation reactions; however, decomposition through these intermediates has been observed. This inspires the development of a PPP-pincer system that may show improved catalyst stability. In this work, bis[2-(diisopropylphosphino)phenyl]phosphine (or iPrPPHP) is used to react with FeCl2 under a carbon monoxide (CO) atmosphere to yield trans-(iPrPPHP)Fe(CO)Cl2. A subsequent reaction with NaBH4 produces syn/anti-(iPrPPHP)FeH(CO)Cl or cis,anti-(iPrPPHP)Fe(CO)H2, depending on the amount of NaBH4 employed. The cis-dihydride complex shows catalytic activity for the conversion of PhCHO to PhCH2OH (under H2) or PhCO2CH2Ph (under Ar). It also catalyzes the dehydrogenation of PhCH2OH to PhCHO and PhCO2CH2Ph, albeit with limited turnover numbers. A more efficient catalytic process is the dehydrogenation of formic acid to carbon dioxide (CO2), which can operate under additive-free conditions. Mechanistic investigation suggests that the cis-dihydride complex undergoes protonation with formic acid to release H2 while forming anti-(iPrPPHP)FeH(CO)(OCHO)·HCO2H, in which the CO ligand has shifted and the formate is hydrogen-bonded to formic acid. The hydrido formate complex loses CO2 under ambient conditions, completing the catalytic cycle by reforming the cis-dihydride complex.

Synthesis and Characterization of Late Transition Metal Complexes of Mono-Acetate Pendant Armed Ethylene Cross-Bridged Tetraazamacrocycles with Promise as Oxidation Catalysts for Dye Bleaching.

Ethylene cross-bridged tetraazamacrocycles are known to produce kinetically stable transition metal complexes that can act as robust oxidation catalysts under harsh aqueous conditions. We have synthesized ligand analogs with single acetate pendant arms that act as pentadentate ligands to Mn, Fe, Co, Ni, Cu, and Zn. These complexes have been synthesized and characterized, including the structural characterization of four Co and Cu complexes. Cyclic voltammetry demonstrates that multiple oxidation states are stabilized by these rigid, bicyclic ligands. Yet, redox potentials of the metal complexes are modified compared to the "parent" ligands due to the pendant acetate arm. Similarly, gains in kinetic stability under harsh acidic conditions, compared to parent complexes without the pendant acetate arm, were demonstrated by a half-life seven times longer for the cyclam copper complex. Due to the reversible, high oxidation states available for the Mn and Fe complexes, the Mn and Fe complexes were examined as catalysts for the bleaching of three commonly used pollutant model dyes (methylene blue, methyl orange, and Rhodamine B) in water with hydrogen peroxide as oxidant. The efficient bleaching of these dyes was observed.

Experimental Evidence of syn H-N-Fe-H Configurational Requirement for Iron-Based Bifunctional Hydrogenation Catalysts.

Iron hydrides supported by a pincer ligand of the type HN(CH2CH2PR2)2 (RPNHP) are versatile hydrogenation catalysts. Previous efforts have focused on using CO as an additional ligand to stabilize the hydride species. In this work, CO is replaced with isocyanide ligands, leading to the isolation of two different types of iron hydride complexes: (RPNHP)FeH(CNR')(BH4) (R = iPr, R' = 2,6-Me2C6H3, tBu; R = Cy, R' = 2,6-Me2C6H3) and [(iPrPNHP)FeH(CNtBu)2]X (X = BPh4, Br, or a mixture of Br and BH4). The neutral iron hydrides are capable of catalyzing the hydrogenation of PhCO2CH2Ph to PhCH2OH, although the activity is lower than for (iPrPNHP)FeH(CO)(BH4). The cationic iron hydrides are active hydrogenation catalysts only for more reactive carbonyl substrates such as PhCHO, and only when the NH and FeH hydrogens are syn to each other. The cationic species and their synthetic precursors [(iPrPNHP)FeBr(CNtBu)2]X (X = BPh4, Br) can have different configurations for the isocyanide ligands (cis or trans) and the H-N-Fe-H(Br) unit (syn or anti). Unlike tetraphenylborate, the bromide counterion participates in a hydrogen-bonding interaction with the NH group, which influences the relative stability of the cis,anti and cis,syn isomers. These structural differences have been elucidated by X-ray crystallography, and the geometric isomerization processes have been studied by NMR spectroscopy.

Water's Role in Polymorphic Platinum(II) Complexes.

Solvent plays a vital role in the recrystallization process and resulting crystallinity of materials. This role is of such importance that it can control the stability and utility of materials. In this work, the inclusion of a solvent in the crystalline lattice, specifically water, drastically affects the overall stability of two platinum polymorphs. [Pt(tpy)Cl]BF4 (tpy = 2,2';6'2″-terpyridine) crystallizes in three forms, red (1R) and blue (1B) polymorphs and a yellow nonsolvated form (2). 1R is the more stable of the two polymorphs, whereas 1B loses crystallinity upon dehydration at ambient conditions resulting in the formation of 2. Close examination of the solid-state extended structures of the two polymorphs reveals that 1R has a lattice arrangement that is more conducive to stronger intermolecular interactions compared to 1B, thereby promoting greater stability. In addition, these two polymorphs exhibit unique vapochromic responses when exposed to various solvents.

Microwave-Assisted Synthesis of Organometallic Rhenium (I) Pentylcarbonato Complexes: New Synthon for Carboxylato, Sulfonato and Chlorido Complexes.

Tricarbonylrhenium(I)(α-diimine) complexes are of importance because of their strong cytotoxic and fluorescence properties. Syntheses of such complexes were achieved through a two-step process. First, the pentylcarbonato complexes, fac-(CO)3(α-diimine)ReOC(O)OC5H11 were synthesized through a microwave-assisted reaction of Re2(CO)10, α-diimine, 1-pentanol and CO2 in a few hours. Second, the pentylcarbonato complexes are treated with carboxylic, sulfonic and halo acids to obtain the corresponding carboxylato, sulfonato and halido complexes. This is the first example of conversion of Re2(CO)10 into a rhenium carbonyl complex through microwave-assisted reaction.

Cracking under Internal Pressure: Photodynamic Behavior of Vinyl Azide Crystals through N2 Release.

When exposed to UV light, single crystals of the vinyl azides 3-azido-1-phenylpropenone (1a), 3-azido-1-(4-methoxyphenyl)propenone (1b), and 3-azido-1-(4-chlorophenyl)propenone (1c) exhibit dramatic mechanical effects by cracking or bending with the release of N2. Mechanistic studies using laser flash photolysis, supported by quantum mechanical calculations, show that each of the vinyl azides degrades through a vinylnitrene intermediate. However, despite having very similar crystal packing motifs, the three compounds exhibit distinct photomechanical responses in bulk crystals. While the crystals of 1a delaminate and release gaseous N2 indiscriminately under paraffin oil, the crystals of 1b and 1c visibly expand, bend, and fracture, mainly along specific crystallographic faces, before releasing N2. The photochemical analysis suggests that the observed expansion is due to internal pressure exerted by the gaseous product in the crystal lattices of these materials. Lattice energy calculations, supported by nanoindentation experiments, show significant differences in the respective lattice energies. The calculations identify critical features in the crystal structures of 1b and 1c where elastic energy accumulates during gas release, which correspond to the direction of the observed cracks. This study highlights the hitherto untapped potential of photochemical gas release to elicit a photomechanical response and motility of photoreactive molecular crystals.

Steric Effects of HN(CH2CH2PR2)2 on the Nuclearity of Copper Hydrides.

Copper hydride clusters of the type (RPNHP)nCu2nH2n (RPNHP = HN(CH2CH2PR2)2; n = 2 and 3) have been synthesized from the reaction of (RPNHP)CuBr with KOtBu under H2 or in one pot from a 1:2:2 mixture of RPNHP, CuBr, and KOtBu under H2. With medium-sized phosphorus substituents (R = iPr and Cy), the phosphine ligands stabilize both hexanuclear and tetranuclear clusters; however, the smaller clusters are kinetic products and aggregate further over time. Use of a bulkier ligand tBuPNHP leads to the formation of only a tetranuclear cluster. Crystallographic studies reveal a distorted octahedral Cu6 unit in (iPrPNHP)3Cu6H6 (2a) and (CyPNHP)3Cu6H6 (2b), while a tetrahedral Cu4 unit exists in (CyPNHP)2Cu4H4 (2b') and (tBuPNHP)2Cu4H4 (2c'), all furnished with face-capping hydrides and bridging RPNHP ligands. The aggregations are maintained in solution, although hydrides are fluxional. These copper clusters are capable of reducing aldehydes and ketones to the corresponding copper alkoxide species. Ranking their reactivity toward N-methyl-2-pyrrolecarboxaldehyde gives 2b' > 2a, 2b ≫ 2c', which correlates inversely with the order of thermal stability (against decomposition and cluster expansion).

Comparison of the Photochemistry of Acyclic and Cyclic 4-(4-Methoxy-phenyl)-4-oxo-but-2-enoate Ester Derivatives.

To clarify the cis-trans isomerization mechanism of simple alkenes on the triplet excited state surface, the photochemistry of acyclic and cyclic vinyl ketones with a p-methoxyacetophenone moiety as a built-in triplet sensitizer (1 and 2, respectively) was compared. When irradiated, ketone 1 produces its cis-isomer, whereas ketone 2 does not yield any photoproducts. Laser flash photolysis of ketone 1 yields a transient spectrum with λmax ∼ 400 nm (τ ∼ 125 ns). This transient is assigned to the first triplet excited state (T1) of 1, which presumably decays to form a triplet biradical (1BR) that is shorter lived than the triplet ketone. In comparison, laser flash photolysis of 2 reveals two transients (τ ∼ 20 and 440 ns), which are assigned to T1 of 2 and triplet biradical 2BR, respectively. Density functional theory calculations support the characterization of the triplet excited states and the biradical intermediates formed upon irradiation of ketones 1 and 2 and allow a comparison of the physical properties of the biradical intermediates. As the biradical centers in 2BR are stabilized by conjugation, 2BR is more rigid than 1BR. Therefore, the longer lifetime of 2BR can be attributed to less-efficient intersystem crossing to the ground state.

Spectroscopic Characterization of Platinum(IV) Terpyridyl Complexes.

Pt(tpy)X3+ [X = Cl (1), Br (2); tpy = 2,2':6',2″-terpyridine] salts were prepared by the oxidative addition of Pt(tpy)X+ with X2 as originally reported by Morgan and Burstall in 1934. The complexes have been fully characterized by 1H NMR spectroscopy, elemental analysis, mass spectrometry, and X-ray crystallography. The electronic structures of 1 and 2 were investigated using absorption and emission spectroscopy, and the accumulated data are consistent with stabilization of the singlet ligand-centered and potentially singlet ligand field/singlet ligand-to-metal charge-transfer states for 1 and 2 compared to those for Pt(tpy)Cl+ (3) and Pt(tpy)Br+ (4). The changes in the lowest-energy-absorbing state result in drastic differences in the emission behavior among 1-4. Specifically, 1 emits from a lowest-energy state that appears to have triplet ligand field/triplet ligand-to-metal charge-transfer character, whereas 2 exhibits no appreciable emission between 400 and 800 nm.

Synthesis, Luminescence, and Structure of a Polymorphic Polyfluorinated Diiodoplatinum(II) Diimine Complex.

PtI2(5,5'-bis(HCF2CH2OCH2)-2,2'-bpy)], 55-2FH-PtI2, is the first example of a substituted fluorinated diiodoplatinum diimine complex that exhibits polymorphism. The complex, upon recrystallization, forms two different polymorphs, denoted as α and ß forms. The luminescence of the α and ß forms are the same in glassy solution at 77 K; however, in the solid state, they differ significantly. The major difference between them lies in the solid-state packing of the crystalline structure. The α form is a square planar polyfluorinated PtI2-containing complex. Its extended herringbone structure consists of two neighboring stacked bipyridyl planes that do not overlap. The α form emits stronger than its parent molecule, [PtI2bpy], and much stronger than the ß polymorph. The ß form has a slight tetrahedral distortion about the metal center that ultimately changes the geometry of the complex and decreases the d-orbital splitting from square planar. Furthermore, overlapping bipyridine rings in the extended structure of the ß form quench the emission thus resulting in a lower energy emission. Additionally, the ß form shows only one type of C-H···O intermolecular stacking interaction that can cause the moderate distortion of the metal core.

Tetraazamacrocyclic derivatives and their metal complexes as antileishmanial leads.

A total of 44 bis-aryl-monocyclic polyamines, monoaryl-monocyclic polyamines and their transition metal complexes were prepared, chemically characterized, and screened in vitro against the Leishmania donovani promastigotes, axenic amastigotes and intracellular amastigotes in THP1 cells. The IC50 and/or IC90 values showed that 10 compounds were similarly active at about 2-fold less potent than known drug pentamidine against promastigotes. The most potent compound had an IC50 of 2.82 µM (compared to 2.93 µM for pentamidine). Nine compounds were 1.1-13.6-fold more potent than pentamidine against axenic amastigotes, the most potent one being about 2-fold less potent than amphotericin B. Fourteen compounds were about 2-10 fold more potent than pentamidine, the most potent one is about 2-fold less potent than amphotericin B against intracellular amastigotes in THP1 cells. The 2 most promising compounds (FeL7Cl2 and MnL7Cl2), with strong activity against both promastigotes and amastigotes and no observable toxicity against the THP1 cells are the Fe2+- and Mn2+- complexes of a dibenzyl cyclen derivative. Only 2 of the 44 compounds showed observable cytotoxicity against THP1 cells. Tetraazamacrocyclic monocyclic polyamines represent a new class of antileishmanial lead structures that warrant follow up studies.

Unprecedented anticancer activities of organorhenium sulfonato and carboxylato complexes against hormone-dependent MCF-7 and hormone-independent triple-negative MDA-MB-231 breast cancer cells.

Cisplatin and other metal-based drugs often display side effects and tumor resistance after prolonged use. Because rhenium-based anticancer complexes are often less toxic, a novel series of organorhenium complexes were synthesized of the types: XRe(CO)3Z (X = α-diimines and Z = p-toluenesulfonate, 1-naphthalenesulfonate, 2-naphthalenesulfonate, picolinate, nicotinate, aspirinate, naproxenate, flufenamate, ibuprofenate, mefenamate, tolfenamate, N-acetyl-tryptophanate), and their biological properties were examined. Specifically, in hormone-dependent MCF-7 and hormone-independent triple-negative MDA-MB-231 breast cancer cells, the p-toluenesulfonato, 1-naphthalenesulfonato, 2-naphthalenesulfonato, picolinato, nicotinato, acetylsalicylato, flufenamato, ibuprofenato, mefenamato, and N-acetyl-tryptophanato complexes were found to be far more potent than conventional drug cisplatin. DNA-binding studies were performed in each case via UV-Vis titrations, cyclic voltammetry, gel electrophoresis, and viscosity, which suggest DNA partial intercalation interaction, and the structure-activity relationship studies suggest that the anticancer activities increase with the increasing lipophilicities of the compounds, roughly consistent with their DNA-binding activities.