Ru-Induced Defect Engineering in Co3O4 Lattice for High Performance Electrochemical Reduction of Nitrate to Ammonium.

Amidst these growing sustainability concerns, producing NH4 + via electrochemical NO3 - reduction reaction (NO3RR) emerges as a promising alternative to the conventional Haber-Bosch process. In a pioneering approach, this study introduces Ru incorporation into Co3O4 lattices at the nanoscale and further couples it with electroreduction conditioning (ERC) treatment as a strategy to enhance metal oxide reducibility and induce oxygen vacancies, advancing NH4 + production from NO3RR. Here, supported by a suite of ex situ and in situ characterization measurements, the findings reveal that Ru enrichment promotes Co species reduction and oxygen vacancy formation. Further, as evidenced by the theoretical calculations, Ru integration lowers the energy barrier for oxygen vacancy formation, thereby facilitating a more energy-efficient NO3RR-to-NH4 + pathway. Optimal catalytic activity is realized with a Ru loading of 10 at.% (named 10Ru/Co3O4), achieving a high NH4 + production rate (98 nmol s-1 cm-2), selectivity (97.5%) and current density (≈100 mA cm-2) at -1.0 V vs RHE. The findings not only provide insights into defect engineering via the incorporation of secondary sites but also lay the groundwork for innovative catalyst design aimed at improving NH4 + yield from NO3RR. This research contributes to the ongoing efforts to develop sustainable electrochemical processes for nitrogen cycle management.

Mass Transport via In-Plane Nanopores in Graphene Oxide Membranes.

Angstrom-confined solvents in 2D laminates can travel through interlayer spacings, through gaps between adjacent sheets, and via in-plane pores. Among these, experimental access to investigate the mass transport through in-plane pores is lacking. Our experiments allow an understanding of this mass transport via the controlled variation of oxygen functionalities, size and density of in-plane pores in graphene oxide membranes. Contrary to expectations, our transport experiments show that higher in-plane pore densities may not necessarily lead to higher water permeability. We observed that membranes with a high in-plane pore density but a low amount of oxygen functionalities exhibit a complete blockage of water. However, when water-ethanol mixtures with a weaker hydrogen network are used, these membranes show an enhanced permeation. Our combined experimental and computational results suggest that the transport mechanism is governed by the attraction of the solvents toward the pores with functional groups and hindered by the strong hydrogen network of water formed under angstrom confinement.

Advancing MXene Electrocatalysts for Energy Conversion Reactions: Surface, Stoichiometry, and Stability.

MXenes, due to their tailorable chemistry and favourable physical properties, have great promise in electrocatalytic energy conversion reactions. To exploit fully their enormous potential, further advances specific to electrocatalysis revolving around their performance, stability, compositional discovery and synthesis are required. The most recent advances in these aspects are discussed in detail: surface functional and stoichiometric modifications which can improve performance, Pourbaix stability related to their electrocatalytic operating conditions, density functional theory and advances in machine learning for their discovery, and prospects in large scale synthesis and solution processing techniques to produce membrane electrode assemblies and integrated electrodes. This Review provides a perspective that is complemented by new density functional theory calculations which show how these recent advances in MXene material design are paving the way for effective electrocatalysts required for the transition to integrated renewable energy systems.

Understanding the Synergy between Fe and Mo Sites in the Nitrate Reduction Reaction on a Bio-Inspired Bimetallic MXene Electrocatalyst.

Mo- and Fe-containing enzymes catalyze the reduction of nitrate and nitrite ions in nature. Inspired by this activity, we study here the nitrate reduction reaction (NO3 RR) catalyzed by an Fe-substituted two-dimensional molybdenum carbide of the MXene family, viz., Mo2 CTx : Fe (Tx are oxo, hydroxy and fluoro surface termination groups). Mo2 CTx : Fe contains isolated Fe sites in Mo positions of the host MXene (Mo2 CTx ) and features a Faradaic efficiency (FE) and an NH3 yield rate of 41 % and 3.2 µmol h-1 mg-1 , respectively, for the reduction of NO3 - to NH4 + in acidic media and 70 % and 12.9 µmol h-1 mg-1 in neutral media. Regardless of the media, Mo2 CTx : Fe outperforms monometallic Mo2 CTx owing to a more facile reductive defunctionalization of Tx groups, as evidenced by in situ X-ray absorption spectroscopy (Mo K-edge). After surface reduction, a Tx vacancy site binds a nitrate ion that subsequently fills the vacancy site with O* via oxygen transfer. Density function theory calculations provide further evidence that Fe sites promote the formation of surface O vacancies, which are identified as active sites and that function in NO3 RR in close analogy to the prevailing mechanism of the natural Mo-based nitrate reductase enzymes.

Altering Oxygen Binding by Redox-Inactive Metal Substitution to Control Catalytic Activity: Oxygen Reduction on Manganese Oxide Nanoparticles as a Model System.

Establishing generic catalyst design principles by identifying structural features of materials that influence their performance will advance the rational engineering of new catalytic materials. In this study, by investigating metal-substituted manganese oxide (spinel) nanoparticles, Mn3 O4 :M (M=Sr, Ca, Mg, Zn, Cu), we rationalize the dependence of the activity of Mn3 O4 :M for the electrocatalytic oxygen reduction reaction (ORR) on the enthalpy of formation of the binary MO oxide, Δf H°(MO), and the Lewis acidity of the M2+ substituent. Incorporation of elements M with low Δf H°(MO) enhances the oxygen binding strength in Mn3 O4 :M, which affects its activity in ORR due to the established correlation between ORR activity and the binding energy of *O/*OH/*OOH species. Our work provides a perspective on the design of new compositions for oxygen electrocatalysis relying on the rational substitution/doping by redox-inactive elements.

Introducing Stacking Faults into Three-Dimensional Branched Nickel Nanoparticles for Improved Catalytic Activity.

Creating high surface area nanocatalysts that contain stacking faults is a promising strategy to improve catalytic activity. Stacking faults can tune the reactivity of the active sites, leading to improved catalytic performance. The formation of branched metal nanoparticles with control of the stacking fault density is synthetically challenging. In this work, we demonstrate that varying the branch width by altering the size of the seed that the branch grows off is an effective method to precisely tune the stacking fault density in branched Ni nanoparticles. A high density of stacking faults across the Ni branches was found to lower the energy barrier for Ni2+/Ni3+ oxidation and result in enhanced activity for electrocatalytic oxidation of 5-hydroxylmethylfurfural. These results show the ability to synthetically control the stacking fault density in branched nanoparticles as a basis for enhanced catalytic activity.

Ceria Nanoparticles as an Unexpected Catalyst to Generate Nitric Oxide from S-Nitrosoglutathione.

Ceria nanoparticles (NPs) are widely reported to scavenge nitric oxide (NO) radicals. This study reveals evidence that an opposite effect of ceria NPs exists, that is, to induce NO generation. Herein, S-nitrosoglutathione (GSNO), one of the most biologically abundant NO donors, is catalytically decomposed by ceria NPs to produce NO. Ceria NPs maintain a high NO release recovery rate and retain their crystalline structure for at least 4 weeks. Importantly, the mechanism of this newly discovered NO generation capability of ceria NPs from GSNO is deciphered to be attributed to the oxidation of Ce3+ to Ce4+ on their surface, which is supported by X-ray photoelectron spectroscopy and density functional theory analysis. The prospective therapeutic effect of NO-generating ceria NPs is evaluated by the suppression of cancer cells, displaying a significant reduction of 93% in cell viability. Overall, this report is, to the authors' knowledge, the first study to identify the capability of ceria NPs to induce NO generation from GSNO, which overturns the conventional concept of them acting solely as a NO-scavenging agent. This study will deepen our knowledge about the therapeutic effects of ceria NPs and open a new route toward the NO-generating systems for biomedical applications.

Engineering Multidefects on Cex Si1- x O2- δ Nanocomposites for the Catalytic Ozonation Reaction.

Herein, it is shown that by engineering defects on Cex Si1- x O2- δ nanocomposites synthesized via flame spray pyrolysis, oxygen vacancies can be created with an increased density of trapped electrons, enhancing the formation of reactive oxygen species (ROSs) and hydroxyl radicals in an ozone-filled environment. Spectroscopic analysis and density functional theory calculations indicate that two-electron oxygen vacancies (OV 0 ) or peroxide species, and their degree of clustering, play a critical role in forming reactive radicals. It is also found that a higher Si content in the binary oxide imposes a high OV 0 ratio and, consequently, higher catalytic activity. Si inclusion in the nanocomposite appears to stabilize the surface oxygen vacancies as well as increase the reactive electron density at these sites. A mechanistic study on effective ROSs generated during catalytic ozonation reveals that the hydroxyl radical is the most effective ROS for organic degradation and is formed primarily through H2 O2 generation in the presence of the OV 0 . Examining the binary oxides offers insights on the contribution of oxygen vacancies and their state of charge to catalytic reactions, in this instance for the catalytic ozonation of organic compounds.

Unraveling the Growth Mechanism of Magic-Sized Semiconductor Nanocrystals.

Magic-sized clusters (MSCs) of semiconductor are typically defined as specific molecular-scale arrangements of atoms that exhibit enhanced stability. They often grow in discrete jumps, creating a series of crystallites, without the appearance of intermediate sizes. However, despite their long history, the mechanism behind their special stability and growth remains poorly understood. It is particularly difficult to explain experiments that have shown discrete evolution of MSCs to larger sizes well beyond the "cluster" regime and into the size range of colloidal quantum dots. Here, we study the growth of MSCs, including these larger magic-sized CdSe nanocrystals, to unravel the underlying growth mechanism. We first introduce a synthetic protocol that yields a series of nine magic-sized nanocrystals of increasing size. By investigating these crystallites, we obtain important clues about the mechanism. We then develop a microscopic model that uses classical nucleation theory to determine kinetic barriers and simulate the growth. We show that magic-sized nanocrystals are consistent with a series of zinc-blende crystallites that grow layer by layer under surface-reaction-limited conditions. They have a tetrahedral shape, which is preserved when a monolayer is added to any of its four identical facets, leading to a series of discrete nanocrystals with special stability. Our analysis also identifies strong similarities with the growth of semiconductor nanoplatelets, which we then exploit to further increase the size range of our magic-sized nanocrystals. Although we focus here on CdSe, these results reveal a fundamental growth mechanism that can provide a different approach to nearly monodisperse nanocrystals.

Structural and biological aspects of natural bridged macrobicyclic peptides from marine resources.

Among peptide-based drugs, naturally occurring bicyclic compounds have been established as molecules with unique therapeutic potential. The diverse pharmacological activities associated with bicyclic peptides from marine tunicates, sponges, and bacteria render them suitable to be employed as effective surrogate between complex and small therapeutic moieties. Bicyclic peptides possess greater conformational rigidity and higher metabolic stability as compared with linear and monocyclic peptides. The antibody-like affinity and specificity of bicyclic peptides enable their binding to the challenging drug targets. Bridged macrobicyclic peptides from natural marine resources represent an underexplored class of molecules that provides promising platforms for drug development owing to their biocompatibility, similarity, and chemical diversity to proteins. The present review explores major marine-derived bicyclic peptides including disulfide-bridged, histidinotyrosine-bridged, or histidinoalanine-bridged macrobicyclic peptides along with their structural characteristics, synthesis, structure-activity relationship, and bioproperties.The comparison of these macrobicyclic congeners with linear/monocyclic peptides along with their therapeutic potential are also briefly discussed.

Tailoring Lattice Oxygen Binding in Ruthenium Pyrochlores to Enhance Oxygen Evolution Activity.

Ruthenium pyrochlores, that is, oxides of composition A2Ru2O7-δ, have emerged recently as state-of-the-art catalysts for the oxygen evolution reaction (OER) in acidic conditions. Here, we demonstrate that the A-site substituent in yttrium ruthenium pyrochlores Y1.8M0.2Ru2O7-δ (M = Cu, Co, Ni, Fe, Y) controls the concentration of surface oxygen vacancies (VO) in these materials whereby an increased concentration of VO sites correlates with a superior OER activity. DFT calculations rationalize these experimental trends demonstrating that the higher OER activity and VO surface density originate from a weakened strength of the M-O bond, scaling with the formation enthalpy of the respective MOx phases and the coupling between the M d states and O 2p states. Our work introduces a novel catalyst with improved OER performance, Y1.8Cu0.2Ru2O7-δ, and provides general guidelines for the design of active electrocatalysts.

Microfluidics and Nanomaterial-based Technologies for Circulating Tumor Cell Isolation and Detection.

Cancer has been one of the leading causes of death globally, with metastases and recurrences contributing to this result. The detection of circulating tumor cells (CTCs), which have been implicated as a major population of cells that is responsible for seeding and migration of tumor sites, could contribute to early detection of metastasis and recurrences, consequently increasing the chances of cure. This review article focuses on the current progress in microfluidics technology in CTCs diagnostics, extending to the use of nanomaterials and surface modification techniques for diagnostic applications, with an emphasis on the importance of integrating microchannels, nanomaterials, and surface modification techniques in the isolating and detecting of CTCs.

Faceted Branched Nickel Nanoparticles with Tunable Branch Length for High-Activity Electrocatalytic Oxidation of Biomass.

Controlling the formation of nanosized branched nanoparticles with high uniformity is one of the major challenges in synthesizing nanocatalysts with improved activity and stability. Using a cubic-core hexagonal-branch mechanism to form highly monodisperse branched nanoparticles, we vary the length of the nickel branches. Lengthening the nickel branches, with their high coverage of active facets, is shown to improve activity for electrocatalytic oxidation of 5-hydroxymethylfurfural (HMF), as an example for biomass conversion.

Single Site Cobalt Substitution in 2D Molybdenum Carbide (MXene) Enhances Catalytic Activity in the Hydrogen Evolution Reaction.

Two-dimensional (2D) carbides, nitrides, and carbonitrides known as MXenes are emerging materials with a wealth of useful applications. However, the range of metals capable of forming stable MXenes is limited mostly to early transition metals of groups 3-6, making the exploration of properties inherent to mid or late transition metal MXenes very challenging. To circumvent the inaccessibility of MXene phases derived from mid-to-late transition metals, we have developed a synthetic strategy that allows the incorporation of such transition metal sites into a host MXene matrix. Here, we report the structural characterization of a Mo2CTx:Co phase (where Tx are O, OH, and F surface terminations) that is obtained from a cobalt-substituted bulk molybdenum carbide (ß-Mo2C:Co)  through a two-step synthesis: first an intercalation of gallium yielding Mo2Ga2C:Co followed by removal of Ga via HF treatment. Extended X-ray absorption fine structure (EXAFS) analysis confirms that Co atoms occupy Mo positions in the Mo2CTx lattice, providing isolated Co centers without any detectable formation of other cobalt-containing phases. The beneficial effect of cobalt substitution on the redox properties of Mo2CTx:Co is manifested in a substantially improved hydrogen evolution reaction (HER) activity, as compared to the unsubstituted Mo2CTx catalyst. Density functional theory (DFT) calculations attribute the enhanced HER kinetics of Mo2CTx:Co to the favorable binding of hydrogen on the oxygen terminated MXene surface that is strongly influenced by the substitution of Mo by Co in the Mo2CTx lattice. In addition to the remarkable HER activity, Mo2CTx:Co features excellent operational and structural stability, on par with the best performing non-noble metal-based HER catalysts. Overall, our work expands the compositional space of the MXene family by introducing a material with site-isolated cobalt centers embedded in the stable matrix of Mo2CTx. The synthetic approach presented here illustrates that tailoring the properties of MXenes for a specific application can be achieved via substitution of the host metal sites by mid or late transition metals.

Direct hot-carrier transfer in plasmonic catalysis.

Plasmonic metal nanoparticles can concentrate optical energy and enhance chemical reactions on their surfaces. Plasmons can interact with adsorbate orbitals and decay by directly exciting a carrier from the metal to the adsorbate in a process termed the direct-transfer process. Although this process could be useful for enhancing the efficiency of a chemical reaction, it remains poorly understood. Here, we report a preliminary investigation employing time-dependent density-functional theory (TDDFT) calculations to capture this process at a model metal-adsorbate interface formed by a silver nanoparticle (Ag147) and a carbon monoxide molecule (CO). Direct hot-electron transfer is observed to occur from the occupied states of Ag to the unoccupied molecular orbitals of CO. We determine the probability of this process and show that it depends on the adsorption site of CO. Our results are expected to aid the design of more efficient metal-molecule interfaces for plasmonic catalysis.

Graphene- and Graphene Oxide-Based Nanocomposite Platforms for Electrochemical Biosensing Applications.

Graphene and its derivatives such as graphene oxide (GO) and reduced GO (rGO) offer excellent electrical, mechanical and electrochemical properties. Further, due to the presence of high surface area, and a rich oxygen and defect framework, they are able to form nanocomposites with metal/semiconductor nanoparticles, metal oxides, quantum dots and polymers. Such nanocomposites are becoming increasingly useful as electrochemical biosensing platforms. In this review, we present a brief introduction on the aforementioned graphene derivatives, and discuss their synthetic strategies and structure-property relationships important for biosensing. We then highlight different nanocomposite platforms that have been developed for electrochemical biosensing, introducing enzymatic biosensors, followed by non-enzymatic biosensors and immunosensors. Additionally, we briefly discuss their role in the emerging field of biomedical cell capture. Finally, a brief outlook on these topics is presented.

Graphene Oxide Nanosheets Modified with Single-Domain Antibodies for Rapid and Efficient Capture of Cells.

Peripheral blood can provide valuable information on an individual's immune status. Cell-based assays typically target leukocytes and their products. Characterization of leukocytes from whole blood requires their separation from the far more numerous red blood cells.1 Current methods to classify leukocytes, such as recovery on antibody-coated beads or fluorescence-activated cell sorting require long sample preparation times and relatively large sample volumes.2 A simple method that enables the characterization of cells from a small peripheral whole blood sample could overcome limitations of current analytical techniques. We describe the development of a simple graphene oxide surface coated with single-domain antibody fragments. This format allows quick and efficient capture of distinct WBC subpopulations from small samples (∼30 µL) of whole blood in a geometry that does not require any specialized equipment such as cell sorters or microfluidic devices.