RESUMO
Nanomaterials must be systematically designed to be technologically viable1-5. Driven by optimizing intermolecular interactions, current designs are too rigid to plug in new chemical functionalities and cannot mitigate condition differences during integration6,7. Despite extensive optimization of building blocks and treatments, accessing nanostructures with the required feature sizes and chemistries is difficult. Programming their growth across the nano-to-macro hierarchy also remains challenging, if not impossible8-13. To address these limitations, we should shift to entropy-driven assemblies to gain design flexibility, as seen in high-entropy alloys, and program nanomaterial growth to kinetically match target feature sizes to the mobility of the system during processing14-17. Here, following a micro-then-nano growth sequence in ternary composite blends composed of block-copolymer-based supramolecules, small molecules and nanoparticles, we successfully fabricate high-performance barrier materials composed of more than 200 stacked nanosheets (125 nm sheet thickness) with a defect density less than 0.056 µm-2 and about 98% efficiency in controlling the defect type. Contrary to common perception, polymer-chain entanglements are advantageous to realize long-range order, accelerate the fabrication process (<30 min) and satisfy specific requirements to advance multilayered film technology3,4,18. This study showcases the feasibility, necessity and unlimited opportunities to transform laboratory nanoscience into nanotechnology through systems engineering of self-assembly.
RESUMO
Successfully interfacing enzymes and biomachinery with polymers affords on-demand modification and/or programmable degradation during the manufacture, utilization and disposal of plastics, but requires controlled biocatalysis in solid matrices with macromolecular substrates1-7. Embedding enzyme microparticles speeds up polyester degradation, but compromises host properties and unintentionally accelerates the formation of microplastics with partial polymer degradation6,8,9. Here we show that by nanoscopically dispersing enzymes with deep active sites, semi-crystalline polyesters can be degraded primarily via chain-end-mediated processive depolymerization with programmable latency and material integrity, akin to polyadenylation-induced messenger RNA decay10. It is also feasible to achieve processivity with enzymes that have surface-exposed active sites by engineering enzyme-protectant-polymer complexes. Poly(caprolactone) and poly(lactic acid) containing less than 2 weight per cent enzymes are depolymerized in days, with up to 98 per cent polymer-to-small-molecule conversion in standard soil composts and household tap water, completely eliminating current needs to separate and landfill their products in compost facilities. Furthermore, oxidases embedded in polyolefins retain their activities. However, hydrocarbon polymers do not closely associate with enzymes, as their polyester counterparts do, and the reactive radicals that are generated cannot chemically modify the macromolecular host. This study provides molecular guidance towards enzyme-polymer pairing and the selection of enzyme protectants to modulate substrate selectivity and optimize biocatalytic pathways. The results also highlight the need for in-depth research in solid-state enzymology, especially in multi-step enzymatic cascades, to tackle chemically dormant substrates without creating secondary environmental contamination and/or biosafety concerns.
Assuntos
Lipase/metabolismo , Nanotecnologia , Poliésteres/química , Poliésteres/metabolismo , Polimerização , Biocatálise , Domínio Catalítico , Estabilidade Enzimática , Cinética , Oxirredutases/metabolismo , Polienos/química , Polienos/metabolismo , Especificidade por SubstratoRESUMO
Understanding self-assembling peptides becomes essential in nanotechnology, thereby providing a bottom-up method for fabrication of nanostructures. Diphenylalanine constitutes an outstanding building block that can be assembled into various nanostructures, including two-dimensional bilayers or nanotubes, exhibiting superb mechanical properties. It is known that the effect of the ions is critical in conformational and chemical interactions of bilayers or membranes. In this study, we analyzed the effect of sodium chloride on diphenylalanine bilayer using coarse-grained molecular dynamics simulations, and calculated the bending Young's modulus and the torsional modulus by applying normal modal analysis using an elastic network model. The results showed that sodium chloride dramatically increases the assembling efficiency and stability, thereby promising to allow the precise design and control of the fabrication process and properties of bio-inspired materials. © 2016 Wiley Periodicals, Inc.
RESUMO
Spider and silkworm silk proteins have received much attention owing to their inherent structural stability, biodegradability, and biocompatibility. These silk protein materials have various mechanical characteristics such as elastic modulus, ultimate strength and fracture toughness. While the considerable mechanical characteristics of the core crystalline regions of spider silk proteins at the atomistic scale have been investigated through several experimental techniques and computational studies, there is a lack of comparison between spider and silkworm fibroins in the atomistic scale. In this study, we investigated the differences between the mechanical characteristics of spider and silkworm fibroin structures by applying molecular dynamics and steered molecular dynamics. We found that serine amino acids in silkworm fibroins not only increased the number of hydrogen bonds, but also altered their structural characteristics and mechanical properties.
Assuntos
Proteínas de Insetos/química , Animais , Bombyx , Simulação de Dinâmica Molecular , AranhasRESUMO
An actin filament is an essential cytoskeleton protein in a cell. Various proteins bind to actin for cell functions such as migration, division, and shape control. ADF/cofilin is a protein that severs actin filaments and is related to their dynamics. Actin is known to have excellent mechanical properties. Binding cofilin reduces its mechanical properties, and is related to the severing process. In this research, we applied a coarse-grained molecular dynamics simulation (CGMD) method to obtain actin filaments and cofilin-bound actin (cofilactin) filaments. Using these two obtained models, we constructed an elastic network model-based structure and conducted a normal mode analysis. Based on the low-frequency normal modes of the filament structure, we applied the continuum beam theory to calculate the mechanical properties of the actin and cofilactin filaments. The CGMD method provided structurally accurate actin and cofilactin filaments in relation to the mechanical properties, which showed good agreement with the established experimental results.
Assuntos
Citoesqueleto de Actina/química , Fatores de Despolimerização de Actina/metabolismo , Simulação de Dinâmica Molecular , Fatores de Despolimerização de Actina/química , Actinas/química , Actinas/metabolismoRESUMO
The introduction of molecularly woven three-dimensional (3D) covalent organic framework (COF) crystals into polymers of varying types invokes different forms of contact between filler and polymer. Whereas the combination of woven COFs with amorphous and brittle polymethyl methacrylate results in surface interactions, the use of the liquid-crystalline polymer polyimide induces the formation of polymer-COF junctions. These junctions are generated by the threading of polymer chains through the pores of the nanocrystals, thus allowing for spatial arrangement of polymer strands. This offers a programmable pathway for unthreading polymer strands under stress and leads to the in situ formation of high-aspect-ratio nanofibrils, which dissipate energy during the fracture. Polymer-COF junctions also strengthen the filler-matrix interfaces and lower the percolation thresholds of the composites, enhancing strength, ductility, and toughness of the composites by adding small amounts (~1 weight %) of woven COF nanocrystals. The ability of the polymer strands to closely interact with the woven framework is highlighted as the main parameter to forming these junctions, thus affecting polymer chain penetration and conformation.
RESUMO
High capacity polymer dielectrics that operate with high efficiencies under harsh electrification conditions are essential components for advanced electronics and power systems. It is, however, fundamentally challenging to design polymer dielectrics that can reliably withstand demanding temperatures and electric fields, which necessitate the balance of key electronic, electrical and thermal parameters. Herein, we demonstrate that polysulfates, synthesized by sulfur(VI) fluoride exchange (SuFEx) catalysis, another near-perfect click chemistry reaction, serve as high-performing dielectric polymers that overcome such bottlenecks. Free-standing polysulfate thin films from convenient solution processes exhibit superior insulating properties and dielectric stability at elevated temperatures, which are further enhanced when ultrathin (~5 nm) oxide coatings are deposited by atomic layer deposition. The corresponding electrostatic film capacitors display high breakdown strength (>700 MV m-1) and discharged energy density of 8.64 J cm-3 at 150 °C, outperforming state-of-the-art free-standing capacitor films based on commercial and synthetic dielectric polymers and nanocomposites.
RESUMO
Electronic waste carries energetic costs and an environmental burden rivaling that of plastic waste due to the rarity and toxicity of the heavy-metal components. Recyclable conductive composites are introduced for printed circuits formulated with polycaprolactone (PCL), conductive fillers, and enzyme/protectant nanoclusters. Circuits can be printed with flexibility (breaking strain ≈80%) and conductivity (≈2.1 × 104 S m-1 ). These composites are degraded at the end of life by immersion in warm water with programmable latency. Approximately 94% of the functional fillers can be recycled and reused with similar device performance. The printed circuits remain functional and degradable after shelf storage for at least 7 months at room temperature and one month of continuous operation under electrical voltage. The present studies provide composite design toward recyclable and easily disposable printed electronics for applications such as wearable electronics, biosensors, and soft robotics.
Assuntos
Técnicas Biossensoriais , Tinta , Animais , Condutividade Elétrica , Eletrônica , Estágios do Ciclo de VidaRESUMO
OBJECTIVE: Meniscus tissue is composed of highly aligned type I collagen embedded with cartilaginous matrix. This histological feature endows mechanical properties, such as tensile strength along the direction of the collagen alignment and endurance to compressive load induced by weight bearing. The main objective of this study was to compare the fibrocartilage construction capability of different cell sources in the presence of mechanical stimuli. DESIGN: Synovial multipotent stem cells (SvMSCs) and meniscal chondrocytes (MCs) from immature and mature rabbits were maintained under similar conditions for comparative evaluation of growth characteristics and senescence tendency. The differentiation potential of cell sources, including fibrocartilage generation, were comparatively evaluated. To determine the capability of fibrocartilage generation, cultured cell sheets were rolled up to produce cable-form tissue and subjected to chondrogenic induction in the presence or absence of static tension. RESULTS: Although SvMSCs showed superior cell growth characteristics during in vitro cell expansion, senescence-associated ß-galactosidase expression was consistently higher, compared with MCs. MCs showed glycosaminoglycan (GAG)-rich matrix formation during default in vitro chondrogenesis. While application of static tension significantly reduced GAG production, MCs continued to show robust tissue growth. SvMSCs showed inferior chondrogenic differentiation and diminished tissue growth in the presence of static tension. CONCLUSIONS: While SvMSCs produced fibrous tissue during default in vitro chondrogenesis, their fibrocartilage generation potential in the presence of static tension was significantly lower, compared with MCs. Our results support evaluation of cellular response to tensile stimulus as a decisive factor in determining the ideal cell source for fibrocartilage reconstruction.
Assuntos
Condrócitos , Menisco , Animais , Condrogênese/fisiologia , Fibrocartilagem/metabolismo , Células-Tronco Multipotentes , CoelhosRESUMO
Currently available conductive inks present a challenge to achieving electrical performance without compromising mechanical properties, scalability, and processability. Here, we have developed blends of carbon black and the commercially available triblock copolymer (BCP), poly(styrene-ethylene-butylene-styrene)-g-maleic anhydride (SEBS-g-MAH) (FG1924G, Kraton), that can be readily applied as a conductive coating via a spray-coating process, for a wide range of insulating materials (fabric, wood, glass, and plastic). Simple but effective mechanical and chemical modifications of the ingredients can increase the electrical conductivity (â¼100 S/m) by an order of magnitude more than previously reported for carbon black composites; moreover, the coatings display excellent mechanical flexibility (tensile strain ε â¼ 5.00 mm/mm). To correlate electrical conductivity and nanoscale structural changes with mechanical deformation, small-angle X-ray scattering (SAXS) during in situ tensile testing was performed. We show that the nanocomposite can be produced using low-cost ingredients (â¼$ 10/kg), ensuring scalability for fabrication of large-scale devices without specialized material synthesis. Equally important, the phase behavior of block copolymers can enable recovery from physical damage via thermal annealing, which is critical for product longevity.
RESUMO
Cofilin makes the actin filament flexible and thermally unstable by disassembling the filament and inducing bending and torsional compliance. Actin monomers bound to cofilin are able to chemically and mechanically interact in response to external forces. In this study, we performed two molecular dynamics tensile tests for actin and cofilactin filaments under identical conditions. Surprisingly, cofilactin filaments were found to be twisted, generating shear stress caused by torsion. Additionally, analysis by plane stress assumption indicated that the extension-torsion coupling effect increases the amount of principal stress by 10%. Using elasticity and solid mechanics theories, our study elucidates the role of cofilin in the disassembly of actin filaments under tensile forces.
Assuntos
Citoesqueleto de Actina/fisiologia , Fatores de Despolimerização de Actina/fisiologia , Fenômenos Biofísicos , Elasticidade , Simulação de Dinâmica Molecular , Estresse MecânicoRESUMO
Cofilin is one of the most essential regulatory proteins and participates in the process of disassembling actin filaments. Cofilin induces conformational changes to actin filaments, and both the bending and torsional rigidity of the filament. In this study, we investigate the effects of cofilin on the mechanical properties of actin filaments using computational methods. Three models defined by their number of bound cofilins are constructed using coarse-grained MARTINI force field, and they are then extended with steered molecular dynamics simulation. After obtaining the stress-strain curves of the models, we calculate their Young's moduli and other mechanical properties that have not yet been determined for actin filaments. We analyze the cause of the different behaviors of the three models based on their atomistic geometrical differences. Finally, it is demonstrated that cofilin binding causes changes in the distances, angles, and stabilities of the residues in actin filaments.