Ligand-Structure Effects on N-Heterocyclic Carbene Rhenium Photo- and Electrocatalysts of CO2 Reduction.

Three novel rhenium N-heterocyclic carbene complexes, [Re]-NHC-1-3 ([Re] = fac-Re(CO)3Br), were synthesized and characterized using a range of spectroscopic techniques. Photophysical, electrochemical and spectroelectrochemical studies were carried out to probe the properties of these organometallic compounds. Re-NHC-1 and Re-NHC-2 bear a phenanthrene backbone on an imidazole (NHC) ring, coordinating to Re by both the carbene C and a pyridyl group attached to one of the imidazole nitrogen atoms. Re-NHC-2 differs from Re-NHC-1 by replacing N-H with an N-benzyl group as the second substituent on imidazole. The replacement of the phenanthrene backbone in Re-NHC-2 with the larger pyrene gives Re-NHC-3. The two-electron electrochemical reductions of Re-NHC-2 and Re-NHC-3 result in the formation of the five-coordinate anions that are capable of electrocatalytic CO2 reduction. These catalysts are formed first at the initial cathodic wave R1, and then, ultimately, via the reduction of Re-Re bound dimer intermediates at the second cathodic wave R2. All three Re-NHC-1-3 complexes are active photocatalysts for the transformation of CO2 to CO, with the most photostable complex, Re-NHC-3, being the most effective for this conversion. Re-NHC-1 and Re-NHC-2 afforded modest CO turnover numbers (TONs), following irradiation at 355 nm, but were inactive at the longer irradiation wavelength of 470 nm. In contrast, Re-NHC-3, when photoexcited at 470 nm, yielded the highest TON in this study, but remained inactive at 355 nm. The luminescence spectrum of Re-NHC-3 is red-shifted compared to those of Re-NHC-1 and Re-NHC-2, and previously reported similar [Re]-NHC complexes. This observation, together with TD-DFT calculations, suggests that the nature of the lowest-energy optical excitation for Re-NHC-3 has π→π*(NHC-pyrene) and dπ(Re)→π*(pyridine) (IL/MLCT) character. The stability and superior photocatalytic performance of Re-NHC-3 are attributed to the extended conjugation of the π-electron system, leading to the beneficial modulation of the strongly electron-donating tendency of the NHC group.

Unsaturated and Benzannulated N-Heterocyclic Carbene Complexes of Titanium and Hafnium: Impact on Catalysts Structure and Performance in Copolymerization of Cyclohexene Oxide with CO2.

Tridentate, bis-phenolate N-heterocyclic carbenes (NHCs) are among the ligands giving the most selective and active group 4-based catalysts for the copolymerization of cyclohexene oxide (CHO) with CO2. In particular, ligands based on imidazolidin-2-ylidene (saturated NHC) moieties have given catalysts which exclusively form polycarbonate in moderate-to-high yields even under low CO2 pressure and at low copolymerization temperatures. Here, to evaluate the influence of the NHC moiety on the molecular structure of the catalyst and its performance in copolymerization, we extend this chemistry by synthesizing and characterizing titanium complexes bearing tridentate bis-phenolate imidazol-2-ylidene (unsaturated NHC) and benzimidazol-2-ylidene (benzannulated NHC) ligands. The electronic properties of the ligands and the nature of their bonds to titanium are studied using density functional theory (DFT) and natural bond orbital (NBO) analysis. The metal-NHC bond distances and bond strengths are governed by ligand-to-metal σ- and π-donation, whereas back-donation directly from the metal to the NHC ligand seems to be less important. The NHC π-acceptor orbitals are still involved in bonding, as they interact with THF and isopropoxide oxygen lone-pair donor orbitals. The new complexes are, when combined with [PPN]Cl co-catalyst, selective in polycarbonate formation. The highest activity, albeit lower than that of the previously reported Ti catalysts based on saturated NHC, was obtained with the benzannulated NHC-Ti catalyst. Attempts to synthesize unsaturated and benzannulated NHC analogues based on Hf invariably led, as in earlier work with Zr, to a mixture of products that include zwitterionic and homoleptic complexes. However, the benzannulated NHC-Hf complexes were obtained as the major products, allowing for isolation. Although these complexes selectively form polycarbonate, their catalytic performance is inferior to that of analogues based on saturated NHC.

Rhodium-Catalyzed Dehydrogenative Silylation of Acetophenone Derivatives: Formation of Silyl Enol Ethers versus Silyl Ethers.

A series of rhodium-NSiN complexes (NSiN=bis (pyridine-2-yloxy)methylsilyl fac-coordinated) is reported, including the solid-state structures of [Rh(H)(Cl)(NSiN)(PCy3 )] (Cy=cyclohexane) and [Rh(H)(CF3 SO3 )(NSiN)(coe)] (coe=cis-cyclooctene). The [Rh(H)(CF3 SO3 )(NSiN)(coe)]-catalyzed reaction of acetophenone with silanes performed in an open system was studied. Interestingly, in most of the cases the formation of the corresponding silyl enol ether as major reaction product was observed. However, when the catalytic reactions were performed in closed systems, formation of the corresponding silyl ether was favored. Moreover, theoretical calculations on the reaction of [Rh(H)(CF3 SO3 )(NSiN)(coe)] with HSiMe3 and acetophenone showed that formation of the silyl enol ether is kinetically favored, while the silyl ether is the thermodynamic product. The dehydrogenative silylation entails heterolytic cleavage of the Si-H bond by a metal-ligand cooperative mechanism as the rate-determining step. Silyl transfer from a coordinated trimethylsilyltriflate molecule to the acetophenone followed by proton transfer from the activated acetophenone to the hydride ligand results in the formation of H2 and the corresponding silyl enol ether.

Activation of CO by Hydrogenated Magnesium(I) Dimers: Sterically Controlled Formation of Ethenediolate and Cyclopropanetriolate Complexes.

This study details the formal hydrogenation of two magnesium(I) dimers {(Nacnac)Mg}2 (Nacnac = [{(C6H3R2-2,6)NCMe}2CH](-); R = Pr(i) ((Dip)Nacnac), Et ((Dep)Nacnac)) using 1,3-cyclohexadiene. These reactions afford the magnesium(II) hydride complexes, {(Nacnac)Mg(µ-H)}2. Their reactions with excess CO are sterically controlled and lead cleanly to different C-C coupled products, viz. the ethenediolate complex, ((Dip)Nacnac)Mg{κ(1)-O-[((Dip)Nacnac)Mg(κ(2)-O,O-O2C2H2)]}, and the first cyclopropanetriolate complex of any metal, cis-{((Dep)Nacnac)Mg}3{µ-C3(H3)O3}. Computational studies imply the CO activation processes proceed via very similar mechanisms to those previously reported for related reactions involving f-block metal hydride compounds. This work highlights the potential magnesium compounds hold for use in the "Fischer-Tropsch-like" transformation of CO/H2 mixtures to value added oxygenate products.

Synthesis, photo-, and electrochemistry of ruthenium bis(bipyridine) complexes comprising a N-heterocyclic carbene ligand.

Analogues of [Ru(bpy)3](2+) were prepared in which one pyridine ligand site is substituted by a N-heterocyclic carbene (NHC) ligand, that is, either by an imidazolylidene with a variable wingtip group R (R = Me, 3a; R = Et, 3b; R = iPr, 3c), or by a benzimidazolylidene (Me wingtip group, 3d), or by a 1,2,3-triazolylidene (Me wingtip group, 3e). All complexes were characterized spectroscopically, photophysically, and electrochemically. An increase of the size of the wingtip groups from Me to Et or iPr groups distorts the octahedral geometry (NMR spectroscopy) and curtails the reversibility of the ruthenium oxidation. NHC ligands with methyl wingtip groups display reversible ruthenium oxidation at a potential that reflects the donor properties of the NHC ligand (triazolylidene > imidazolylidene > benzimidazolylidene). The most attractive properties were measured for the triazolylidene ruthenium complex 3e, featuring the smallest gap between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) in the series (2.41 eV), a slightly red-shifted absorption profile, and reasonable excited-state lifetime (188 ns) when compared to [Ru(bpy)3](2+). These features demonstrate the potential utility of triazolylidene ruthenium complexes as photosensitizers for solar energy conversion.

Methyltransferase activity of an iridium center with methylpyridinium as methylene source.

Hop on, hop off: an iridium center transfers a methyl group from pyridinium to an aryl unit, using exclusively the pyridine-bound methyl group as a mild methylene source. The reaction also involves cleavage of an unactivated C(aryl)-H bond and nitrile solvent activation. The process is reminiscent of DNA methylation and entails the formation of two new C(sp(2))-C(sp(3)) bonds within the metal coordination sphere.

Ruthenium Assemblies for CO2 Reduction and H2 Generation: Time Resolved Infrared Spectroscopy, Spectroelectrochemistry and a Photocatalysis Study in Solution and on NiO.

Two novel supramolecular complexes RuRe ([Ru(dceb)2(bpt)Re(CO)3Cl](PF6)) and RuPt ([Ru(dceb)2(bpt)PtI(H2O)](PF6)2) [dceb = diethyl(2,2'-bipyridine)-4,4'-dicarboxylate, bpt = 3,5-di(pyridine-2-yl)-1,2,4-triazolate] were synthesized as new catalysts for photocatalytic CO2 reduction and H2 evolution, respectively. The influence of the catalytic metal for successful catalysis in solution and on a NiO semiconductor was examined. IR-active handles in the form of carbonyl groups on the peripheral ligand on the photosensitiser were used to study the excited states populated, as well as the one-electron reduced intermediate species using infrared and UV-Vis spectroelectrochemistry, and time resolved infrared spectroscopy. Inclusion of ethyl-ester moieties led to a reduction in the LUMO energies on the peripheral bipyridine ligand, resulting in localization of the 3MLCT excited state on these peripheral ligands following excitation. RuPt generated hydrogen in solution and when immobilized on NiO in a photoelectrochemical (PEC) cell. RuRe was inactive as a CO2 reduction catalyst in solution, and produced only trace amounts of CO when the photocatalyst was immobilized on NiO in a PEC cell saturated with CO2.

Anionic hafnium species: an active catalytic intermediate for the coupling of epoxides with CO2?

A series of hafnium complexes were structurally identified showing high activity (up to 500 h-1) in the selective alternated copolymerization of epoxides with CO2 under low pressure.

Synthesis and reactivity at the Ir-MeTpm platform: from κ1-N coordination to κ3-N-based organometallic chemistry.

Reaction of [Ir(µ-Cl)(COE)2]2 (COE = cis-cyclooctene) with tris(3,5-dimethylpyrazol-1-yl)methane (MeTpm) affords [IrCl(κ1-N-MeTpm)(COD)] (1) (COD = 1,5-cyclooctadiene). The formation of 1 implies the transfer dehydrogenation of a COE ligand to give COD and COA (cyclooctane). A mechanistic proposal based on DFT calculations that explains this iridium promoted process has been disclosed. Additionally, reactivity studies have allowed the preparation and characterization, including determination of the molecular structures of a number of iridium complexes with the MeTpm ligand in κ1, κ2 or κ3-N coordination modes. Moreover, the first example of an Ir-cyclooctyl complex featuring hydride and carbonyl ligands, whose solid state structure has been determined by X-ray diffraction methods, is reported.

Coordination behavior of bis-phenolate saturated and unsaturated N-heterocyclic carbene ligands to zirconium: reactivity and activity in the copolymerization of cyclohexene oxide with CO2.

Tetravalent zirconium complexes supported by tridentate bis-phenolate imidazolidin-2-ylidene (L1), imidazol-2-ylidene (L2) and benzimidazol-2-ylidene (L3) NHC ligands were synthesized and evaluated as precursors for the copolymerization of cyclohexene oxide (CHO) with CO2. While the reactivity of the imidazolidinium [H3L1] chloride salt with Zr(OiPr)4(HOiPr), and subsequent ligand exchanges with either (CH3)3SiCl or LiOiPr lead to a series of heteroleptic compounds (κ3-O,C,O-L1)Zr(X)2(THF) (X = Cl, OiPr), both imidazolium [H3L2] and benzimidazolium [H3L3] chloride salts give a mixture of homoleptic (κ3-O,C,O-NHC)2Zr and zwitterionic (κ2-O,O-HL)ZrCl2(OiPr) compounds along with traces or the absence of the heteroleptic intermediate (κ3-O,C,O-NHC)Zr(Cl)(OiPr)(THF). Such dissimilar reactivity between the unsaturated and saturated NHC ligands is predominantly ascribed to the increased acidity of azolium salts along with the π-donor strength of the Ccarbene in L2 and L3-Zr moieties. The reactivity with the more acidic azolium salts (H3L2/3) and the destabilized Zr-Xtrans to NHCcarbene bond results in a significant increase in the amount of homoleptic compounds generating HCl. The released HCl reacts preferentially with the heteroleptic intermediates having non-planar NHC ligands (i.e. L2/3) promoting the formation of zwitterionic complexes. The in situ deprotonation of the isolated zwitterionic (κ2-O,O-HL3)ZrCl2(OiPr) compound by using Ag2O gives the homoleptic complex as the major component along with a bimetallic hydroxo-bridged [(κ3-O,C,O-L3)Zr(µ-OH)(OiPr)]2 compound. Of particular interest is that only the heteroleptic NHC-Zr(iv) complexes were identified to be active and highly selective towards the copolymerization of CHO with CO2 independently of the co-catalysts used (both anionic and neutral) under mild conditions (PCO2 < 1 bar, T = 60 °C), and gave atactic and completely alternating copolymers in a controlled manner (Mw/Mn ≈ 1.3-1.8). In contrast, the isolated homoleptic, zwitterionic and bimetallic zirconium species were found to be inactive under similar reaction conditions. Although the activity found for NHC-Zr(iv) complexes is nearly of the same order of magnitude as that of the NHC-Ti(iv) analogues, these results are the first examples of tetravalent zirconium complexes achieving high selectivity (99% in PCHC) in the catalyzed copolymerization of CHO with CO2.

Sterically (un)encumbered mer-tridentate N-heterocyclic carbene complexes of titanium(iv) for the copolymerization of cyclohexene oxide with CO2.

Titanium(iv) complexes bearing an unsubstituted tridentate bis(phenolate) N-heterocyclic carbene (NHC) were synthesized and structurally identified. While sterically unencumbered NHC-Ti(iv) complexes bearing chloro and alkoxy co-ligands tend to dimerize in solution and in solid-state, the use of a bulky aryloxy as co-ligand favors the monomeric species. Upon activation by onium salts, all these complexes were found to be highly selective towards the copolymerization of cyclohexene oxide (CHO) with CO2 under mild conditions (PCO2 < 1 bar), albeit the sterically unencumbered NHC-Ti(iv) complexes are less stable and active than their structural analogues bearing bulkier substituents.

An extremely bulky tris(pyrazolyl)methanide: a tridentate ligand for the synthesis of heteroleptic magnesium(II) and ytterbium(II) alkyl, hydride, and iodide complexes.

The tris(pyrazolyl)methane compound HC(3-Ad-5-Mepz)3 [1, 3-Ad-5-Mepz=3-(1-adamantyl)-5-methylpyrazolyl] and its regioisomer, HC(3-Ad-5-Mepz)2 (3-Me-5-Adpz), were synthesized and crystallographically characterized. Deprotonation of 1 with MeLi afforded the lithium complex [{κ(3) -N-C(3-Ad-5-Mepz)3 }Li(thf)], which incorporates a tris(pyrazolyl)methanide ligand of unprecedented bulk. Reaction of 1 with MeMgI gave the ionic coordination complex [{κ(3) -N-HC(3-Ad-5-Mepz)3 }MgMe]I, which was readily deprotonated to afford the neutral compound [{κ(3) -N-C(3-Ad-5-Mepz)3 }MgMe]. The related magnesium butyl compound [{κ(3) -N-C(3-Ad-5-Mepz)3 }MgBu] was prepared from the reaction of 1 and MgBu2 . Treating this with LiAlH4 or LiAlD4 led to rare examples of terminal magnesium hydride/deuteride complexes, [{κ(3) -N-C(3-Ad-5-Mepz)3 }MgH/D]. All neutral magnesium alkyl and hydride compounds were crystallographically authenticated. Reaction of [{κ(3) κN-C(3-Ad-5-Mepz)3 }Li(thf)] with [YbI2 (thf)2 ] yielded the first structurally characterized f-block tris(pyrazolyl)methanide complex, [{κ(3) -N-C(3-Ad-5-Mepz)3 }YbI(thf)].

Tunable single-site ruthenium catalysts for efficient water oxidation.

The catalytic water oxidation activity of mononuclear ruthenium complexes comprising a pyridine-functionalized abnormal triazolylidene ligand can be adjusted by modification of the triazolylidene substituents, which is readily achieved through click-type cycloaddition chemistry, affording some of the most active ruthenium catalysts known thus far for water oxidation (TONs > 400, TOFs close to 7000 h(-1)).