Flow Synthesis of Biologically-Relevant Compound Libraries.

Flow chemistry is one of the most prominent enabling technologies that has greatly shaped the way chemists' approach organic synthesis. Specifically, in drug discovery, the advantages of flow techniques over batch procedures allow the rapid and efficient assembly of compound libraries to be tested for biological properties. The aim of the present review is to comment on some representative examples from the last five years of literature that highlight how flow procedures are becoming of increasing importance for the synthesis of biologically-relevant molecules.

Synthesis and Evaluation of Antileishmanial and Cytotoxic Activity of Benzothiopyrane Derivatives.

In continuation of our efforts to identify promising antileishmanial agents based on the chroman scaffold, we synthesized several substituted 2H-thiochroman derivatives, including thiochromenes, thichromanones and hydrazones substituted in C-2 or C-3 with carbonyl or carboxyl groups. Thirty-two compounds were thus obtained, characterized, and evaluated against intracellular amastigotes of Leishmania (V) panamensis. Twelve compounds were active, with EC50 values lower than 40 µM, but only four compounds displayed the highest antileishmanial activity, with EC50 values below 10 µM; these all compounds possess a good Selectivity Index > 2.6. Although two active compounds were thiochromenes, a clear structure-activity relationship was not detected since each active compound has a different substitution pattern.

Towards Sustainable C-H Functionalization Reactions: The Emerging Role of Bio-Based Reaction Media.

In the last decade, transition-metal catalyzed C-H functionalization reactions have progressed enormously, becoming a useful tool in organic synthesis and a practical alternative to well-established methodologies. Very recently, research efforts have also been devoted to developing more sustainable C-H functionalization protocols, in order to increase their applicability. One of the most promising approaches in this sense is represented by the substitution of common reaction media with bio-based solvents. In the present contribution a general perspective on the benefits of this approach is given, followed by key literature examples.

A Design of Experiment Approach for Ionic Liquid-Based Extraction of Toxic Components-Minimized Essential Oil from Myristica fragrans Houtt. Fruits †.

The effect of the addition of ionic liquids (ILs) during the hydrodistillation of Myristica fragrans Houtt. (nutmeg) essential oil was studied. The essential oil of M. fragrans is characterized by the presence of terpenes, terpenoids, and of phenylpropanoids, such as methyl eugenol and safrole, that are regarded as genotoxic and carcinogenic. The aim of the work was to determine the best ionic liquid to improve the yield of the extraction of M. fragrans essential oil and decrease the extraction of toxic phenylpropanoids. Six ILs, namely 1,3-dimethylimidazolium chloride (1), 1,3-dimethylimidazolium dimethylphosphate (2), 1-(2-hydroxyethyl)-3-methylimidazolium chloride (3), 1-(2-hydroxyethyl)-3-methylimidazolium dimethylphosphate (4), 1-butyl-3-methylimidazolium chloride (5), and 1-butyl-3-methylimidazolium dimethylphosphate (6), were prepared by previously reported, innovative methods and then tested. An experimental design was used to optimize the extraction yield and to decrease the phenylpropanoids percentage using the synthesized ILs. The influence of the molarity of ILs was also studied. MODDE 12 software established 0.5 M 1-butyl-3-methylimidazolium chloride as the best co-solvent for the hydrodistillation of M. fragrans essential oil.

PS-BEMP as a basic catalyst for the phospha-Michael addition to electron-poor alkenes.

PS-BEMP was used as a heterogeneous catalyst for the phospha-Michael addition of phosphorus nucleophiles to a variety of electron-poor alkenes. The addition reactions were generally performed with equimolar amounts of reagents under solvent free conditions. The protocol proved to be very efficient for the addition to aromatic, non-aromatic and cyclic ketones, giving good yields (78-85%) in all cases. The protocol was also extended with good results to α,ß-unsaturated esters and nitriles. This demonstrates that PS-BEMP is a good catalyst for the phospha-Michael addition to electron-poor alkenes.

E-Factor minimized hydrophosphonylation of aldehydes catalyzed by polystyryl-BEMP under solvent-free conditions.

An efficient protocol for the hydrophosphonylation of aromatic and aliphatic aldehydes catalyzed by PS-BEMP under solvent-free conditions (SolFC) has been reported. Addition reactions were performed by using equimolar amounts of reagents and the resulting α-hydroxyphosphonates were isolated with simple workup procedures. A large scale protocol for the preparation of a representative α-hydroxyphosphonate 3a has been also set up using a flow reactor.

POLITAG-M-F as Heterogeneous Organocatalyst for the Waste-Minimized Synthesis of ß-Azido Carbonyl Compounds in Batch and under Flow Conditions.

We herein report a waste minimization protocol for the ß-azidation of α,ß-unsaturated carbonyl compounds using TMSN3. The selection of the appropriate catalyst (POLITAG-M-F), in combination with the reaction medium, resulted in enhanced catalytic efficiency and a low environmental footprint. The thermal and mechanical stability of the polymeric support allowed us to recover the POLITAG-M-F catalyst for up to 10 consecutive runs. The CH3CN:H2O azeotrope has a 2-fold positive effect on the process, increasing the efficiency of the protocol and minimizing waste generation. Indeed, the azeotropic mixture, used as a reaction medium and for the workup procedure, was recovered by distillation, leading to an easy and environmentally friendly procedure for product isolation in high yield and with a low E-factor. A comprehensive evaluation of the environmental profile was performed by the calculation of different green metrics (AE, RME, MRP, 1/SF) and a comparison with other literature available protocols. A flow protocol was defined to scale-up the process, and up to 65 mmol of substrates were efficiently converted with a productivity of 0.3 mmol/min.

New bioisosteric sulphur-containing choline kinase inhibitors with a tracked mode of action.

Since the identification of human choline kinase as a protein target against cancer progression, many compounds have been designed to inhibit its function and reduce the biosynthesis of phosphatidylcholine. Herein, we propose a series of bioisosteric inhibitors that are based on the introduction of sulphur and feature improved activity and lipophilic/hydrophilic balance. The evaluation of the inhibitory and of the antiproliferative properties of the PL (dithioethane) and FP (disulphide) libraries led to the identification of PL 48, PL 55 and PL 69 as the most active compounds of the series. Docking analysis using FLAP suggests that for hits to leads, binding mostly involves an interaction with the Mg2+ cofactor, or its destabilization. The most active compounds of the two series are capable of inducing apoptosis following the mitochondrial pathway and to significantly reduce the expression of anti-apoptotic proteins such as the Mcl-1. The fluorescence properties of the compounds of the PL library allowed the tracking of their mode of action, while PAINS (Pan Assays Interference Structures) filtration databases suggest the lack of any unspecific biological response.

Influence of choline chloride-based NADES on the composition of Myristica fragrans Houtt. essential oil.

Natural deep eutectic solvents (NADES) have emerged as green extracting solvents in recent years. In this study, a variety of choline chloride (ChCl)-based natural deep eutectic solvents (NADES) were used as co-solvents for the hydrodistillation of nutmeg with the aim to obtain M. fragrans essential oil (EO) in higher yield and with a lower content of toxic phenylpropenoids (e.g. myristicin and safrole). The influence of ChCl-based NADES as additives in the hydrodistillation process was studied. The results showed that NADES additives improved the yield of the extracted essential oil and influenced its composition leading to a decrease in toxic phenylpropenoids. Best results were achieved by using ChCl-CA NADES ultrasound-assisted pretreatment coupled with traditional 2 â€‹h Clevenger hydrodistillation that increased the yield of the EO from 0.98% (traditional) to 1.41% and a decrease of the phenylpropenoids amount in the essential oil.

Anticancer Activity of the Choline Kinase Inhibitor PL48 Is Due to Selective Disruption of Choline Metabolism and Transport Systems in Cancer Cell Lines.

A large number of different types of cancer have been shown to be associated with an abnormal metabolism of phosphatidylcholine (PC), the main component of eukaryotic cell membranes. Indeed, the overexpression of choline kinase α1 (ChoKα1), the enzyme that catalyses the bioconversion of choline to phosphocholine (PCho), has been found to associate with cell proliferation, oncogenic transformation and carcinogenesis. Hence, ChoKα1 has been described as a possible cancer therapeutic target. Moreover, the choline transporter CTL1 has been shown to be highly expressed in several tumour cell lines. In the present work, we evaluate the antiproliferative effect of PL48, a rationally designed inhibitor of ChoKα1, in MCF7 and HepG2 cell lines. In addition, we illustrate that the predominant mechanism of cellular choline uptake in these cells is mediated by the CTL1 choline transporter. A possible correlation between the inhibition of both choline uptake and ChoKα1 activity and cell proliferation in cancer cell lines is also highlighted. We conclude that the efficacy of this inhibitor on cell proliferation in both cell lines is closely correlated with its capability to block choline uptake and ChoKα1 activity, making both proteins potential targets in cancer therapy.

C2-H Arylation of Indoles Catalyzed by Palladium-Containing Metal-Organic-Framework in γ-Valerolactone.

An efficient and selective procedure was developed for the direct C2-H arylation of indoles using a Pd-loaded metal-organic framework (MOF) as a heterogeneous catalyst and the nontoxic biomass-derived solvent γ-valerolactone (GVL) as a reaction medium. The developed method allows for excellent yields and C-2 selectivity to be achieved and tolerates various substituents on the indole scaffold. The established conditions ensure the stability of the catalyst as well as recoverability, reusability, and low metal leaching into the solution.

Avoiding hot-spots in Microwave-assisted Pd/C catalysed reactions by using the biomass derived solvent γ-Valerolactone.

Herein, we report the use of γ-valerolactone as a new biomass-derived reaction medium for microwave assisted organic synthesis. The interaction of this solvent with microwaves and its heating profile under microwave irradiation has been fully characterized for the first time, demonstrating its stability and the applicability in microwave assisted Pd/C catalysed reactions avoiding the arcing phenomena frequently observed in these conditions. The use of γ-valerolactone demonstrated to be compatible with aliphatic and aromatic amines in the hydrogen transfer Pd/C mediated synthesis of benzimidazoles.

A Catalytic Peterson-like Synthesis of Alkenyl Nitriles.

A heterogeneous fluoride catalyst was found to enable the straightforward formation of alkenyl nitriles from the reaction of aldehydes and simple or substituted acetonitriles, in the presence of commercially available silazanes and in solvent-free conditions. The protocol afforded the products in good to excellent yields with selectivity values dependent on the nature of the substrates. It represents an alternative to classic approaches using stoichiometric strong bases, and the catalyst can be easily recovered and reused for consecutive cycles.

Click-chemistry approaches to π-conjugated polymers for organic electronics applications.

Given the wide utility of click-chemistry reactions for the preparation of simple moieties within large architecturally complex materials, this minireview article aims at surveying papers exploring their scope in the area of π-conjugated polymers for application in organic electronics to enable advanced functional properties.

Template-directed olefin cross metathesis.

[reaction: see text] A template containing two secondary dialkylammonium ion recognition sites for encirclement by olefin-bearing dibenzo[24]crown-8 derivatives has been used to promote olefin cross metatheses with ruthenium-alkylidene catalysts. For monoolefin monomers, the rates of metatheses and yields of the dimers are both amplified in the presence of the template. Likewise, for a diolefin monomer, the yield of the dimer is enhanced in the presence of the template under conditions where higher oligomers are not formed.

A protocol for accessing the ß-azidation of α,ß-unsaturated carboxylic acids.

This contribution reports the preparation and use of a new immobilized catalyst, PS-DABCOF (9), which has been specifically designed to access for the first time the efficient ß-azidation of α,ß-unsaturated carboxylic acids.

Sc(III)-catalyzed enantioselective addition of thiols to α,ß-unsaturated ketones in neutral water.

This report concerns Lewis acid catalyzed enantioselective sulfa-Michael addition in neutral water by using a very efficient Sc(OTf)(3)/bipyridine 1 catalytic system. It is noteworthy that the protocol presented employs water as a reaction medium and allows us to obtain very high stereoselectivity and satisfactory yields for ß-keto sulphides deriving from aliphatic thiols. The recovery and reuse of both the aqueous medium and the catalytic system is also reported.

Template-directed one-step synthesis of cyclic trimers by ADMET.

A trifurcated template, containing three secondary dialkylammonium ion recognition sites for encirclement by a dibenzo [24]crown-8-containing acyclic diene, is used to promote acyclic diene metatheses (ADMET) catalyzed by ruthenium-alkylidene complexes, affording a cyclic trimer in 55% yield. Following this one-step, threefold ADMET reaction, the resulting cyclic trimer was isolated by preparative HPLC and characterized by NMR spectroscopy and mass spectrometry.

Self-assembly with block copolymers through metal coordination of SCS-Pd(II) pincer complexes and pseudorotaxane formation.

Poly(norbornene)-based block copolymers containing side chains of palladated pincer complexes/dibenzo[24]crown-8 or palladated pincer complexes/dibenzylammonium salts were synthesized. Noncovalent functionalization was accomplished with their corresponding recognition units through simple 1:1 addition with association constants (Ka) greater than 10(5) m(-1). The self-assembly processes were monitored by using both 1H NMR spectroscopy and isothermal titration calorimetry. In all cases, we found that the self-assembly of the recognition units along each polymer block does not preclude the self-assembly processes along the other block.