RESUMO
Developing active and stable atomically dispersed catalysts is challenging because of weak non-specific interactions between catalytically active metal atoms and supports. Here we demonstrate a general method for synthesizing atomically dispersed catalysts via photochemical defect tuning for controlling oxygen-vacancy dynamics, which can induce specific metal-support interactions. The developed synthesis method offers metal-dynamically stabilized atomic catalysts, and it can be applied to reducible metal oxides, including TiO2, ZnO and CeO2, containing various catalytically active transition metals, including Pt, Ir and Cu. The optimized Pt-DSA/TiO2 shows unprecedentedly high photocatalytic hydrogen evolution activity, producing 164 mmol g-1 h-1 with a turnover frequency of 1.27 s-1. Furthermore, it generates 42.2 mmol gsub-1 of hydrogen via a non-recyclable-plastic-photoreforming process, achieving a total conversion of 98%; this offers a promising solution for mitigating plastic waste and simultaneously producing valuable energy sources.
RESUMO
Ice, one of the most enigmatic materials on Earth, exhibits diverse polymorphism, with research mainly focusing on the most commonly observed phases: hexagonal ice (Ih), cubic ice (Ic), and stacking-disordered ice (Isd). While their formation or structural changes are crucial for advancements in cloud science, climate modeling, and cryogenic technology, the molecular mechanisms driving these phenomena remain unexplored. Herein, utilizing cryogenic transmission electron microscopy, we investigate the formation of ice at two different temperatures, demonstrating a size-dependent phase shift from Ic to Isd. Furthermore, a relatively metastable cubic phase in Isd transitions to a hexagonal phase under electron beam radiation. This transition, facilitated by crystal defects, contrasts with perfect crystalline Ic, which maintains its original phase, emphasizing the importance of defects in polymorphic phase transitions. Our findings provide novel insights on phase control during the ice growth processes and polymorphic phase transitions from the cubic-to-hexagonal phases.
RESUMO
Childhood trauma and interpersonal sensitivity impact the development of mood disorders. In this study, we investigate the association between childhood trauma and interpersonal sensitivity in patients with mood disorders. A total 775 patients (major depressive disorder [MDD, n = 241], bipolar I disorder [BD I, n = 119], and bipolar II disorder [BD II, n = 415]) and 734 controls. For evaluation, we used the Childhood Trauma Questionnaire-Short Form (CTQ) and Interpersonal Sensitivity Measure (IPSM). We examined between-group differences for each subscale in the CTQ and IPSM. Patients with BD II had significantly higher IPSM total scores than patients with MDD, BD I, or controls. The CTQ total score was related to the IPSM total score in all participants and subgroups. Among the CTQ subscales, emotional abuse showed the highest correlation with the IPSM total score, while separation anxiety and fragile inner self showed higher positive correlations with CTQ than the other subscales of IPSM in all patient groups and the control group, respectively. The findings reveal that childhood trauma and interpersonal sensitivity are positively correlated among patients with MDD, BD I, and BD II, and that interpersonal sensitivity is higher in patients with BD II than those with BD I or MDD. Childhood trauma is associated with interpersonal sensitivity, and each trauma type has a different impact on mood disorders. We expect that this study will encourage future research on interpersonal sensitivity and childhood trauma in mood disorders to improve treatment approaches.
Assuntos
Experiências Adversas da Infância , Transtorno Bipolar , Transtorno Depressivo Maior , Testes Psicológicos , Autorrelato , Humanos , Transtorno Depressivo Maior/complicações , Transtorno Bipolar/psicologia , Inquéritos e QuestionáriosRESUMO
Patients with mood disorders commonly manifest comorbid psychiatric disorders, including attention-deficit/hyperactivity disorder (ADHD). However, few studies have evaluated ADHD symptoms in this population. The current study aimed to explore the network structure of ADHD symptomology and identify central symptoms in patients with mood disorders. The Korean version of the Adult ADHD Self-Report Scale was used to assess the overall ADHD symptoms in 1,086 individuals diagnosed with mood disorders (major depressive disorder [n = 373], bipolar I disorder [n = 314], and bipolar II disorder [n = 399]). We used exploratory graph analysis to detect the number of communities, and the network structure was analyzed using regularized partial correlation models. We identified the central ADHD symptom using centrality indices. Network comparison tests were conducted with different subgroups of patients with mood disorders, including three mood diagnosis groups, between the patients who met the diagnostic criteria for ADHD [ADHD-suspected, n = 259] in their self-report and the others [ADHD-non-suspected, n = 827], and groups with high [n = 503] versus low [n = 252] levels of depressive state. The network analysis detected four communities: disorganization, agitation/restlessness, hyperactivity/impulsivity, and inattention. The centrality indices indicated that "feeling restless" was the core ADHD symptom. The result was replicated in the subgroup analyses within our clinically diverse population of mood disorders, encompassing three presentations: Patients with suspected ADHD, patients without suspected ADHD, and patients with a high depressive state. Our findings reveal that "feeling restless" is the central ADHD symptom. The treatment intervention for "feeling restless" may thus play a pivotal role in tackling ADHD symptoms in adult patients with mood disorders.
RESUMO
A rechargeable aluminum-ion battery based on chloroaluminate electrolytes has received intense attention due to the high abundance and chemical stability of aluminum. However, the fundamental intercalation processes and dynamics in these battery systems remain unresolved. Here, the energetics and dynamics of chloroaluminate ion intercalation in atomically thin single crystal graphite are investigated by fabricating mesoscopic devices for charge transport and operando optical microscopy. These mesoscopic measurements are compared to the high-performance rechargeable Al-based battery consisting of a few-layer graphene-multiwall carbon nanotube composite cathode. These composites exhibit a 60% capacity enhancement over pyrolytic graphite, while an â¼3-fold improvement in overall ion diffusivity is also obtained exhibiting â¼1% of those in atomically thin single crystals. Our results thus establish the distinction between intrinsic and ensemble electrochemical behavior in Al-based batteries and show that engineering ion transport in these devices can yet lead to vast improvements in battery performance.
RESUMO
Pd is one of the most effective catalysts for the electrochemical reduction of CO2 to formate, a valuable liquid product, at low overpotential. However, the intrinsically high CO affinity of Pd makes the surface vulnerable to CO poisoning, resulting in rapid catalyst deactivation during CO2 electroreduction. Herein, we utilize the interaction between metals and metal-organic frameworks to synthesize atomically dispersed Au on tensile-strained Pd nanoparticles showing significantly improved formate production activity, selectivity, and stability with high CO tolerance. We found that the tensile strain stabilizes all reaction intermediates on the Pd surface, whereas the atomically dispersed Au selectively destabilizes CO* without affecting other adsorbates. As a result, the conventional COOH* versus CO* scaling relation is broken, and our catalyst exhibits 26- and 31-fold enhancement in partial current density and mass activity toward electrocatalytic formate production with over 99% faradaic efficiency, compared to Pd/C at -0.25 V versus RHE.
RESUMO
The electrochemical reduction of CO2 stores intermittent renewable energy in valuable raw materials, such as chemicals and transportation fuels, while minimizing carbon emissions and promoting carbon-neutral cycles. Recent technoeconomic reports suggested economically feasible target products of CO2 electroreduction and the relative influence of key performance parameters such as faradaic efficiency (FE), current density, and overpotential in the practical industrial-scale applications. Furthermore, fundamental factors, such as available reaction pathways, shared intermediates, competing hydrogen evolution reaction, scaling relations of the intermediate binding energies, and CO2 mass transport limitations, should be considered in relation to the electrochemical CO2 reduction performance. Intensive research efforts have been devoted to designing and developing advanced electrocatalysts and improving mechanistic understanding. More recently, the research focus was extended to the catalyst environment, because the interfacial region can delicately modulate the catalytic activity and provide effective solutions to challenges that were not fully addressed in the material development studies. Herein, we discuss the importance of catalyst-electrolyte interfaces in improving key operational parameters based on kinetic equations. Furthermore, we extensively review previous studies on controlling organic modulators, electrolyte ions, electrode structures, as well as the three-phase boundary at the catalyst-electrolyte interface. The interfacial region modulates the electrocatalytic properties via electronic modification, intermediate stabilization, proton delivery regulation, catalyst structure modification, reactant concentration control, and mass transport regulation. We discuss the current understanding of the catalyst-electrolyte interface and its effect on the CO2 electroreduction activity.
RESUMO
Background and objectives: Mood instability (MI) is a stable trait associated with psychiatric disorders, yet there is a lack of tools to measure MI. The purpose of this study was to develop and validate the Mood Instability Questionnaire-Trait (MIQ-T) to evaluate MI in mood disorder patients. Material and methods: Items were taken from various established questionnaires to create an initial list of MIQ-T questions. Data from 309 psychiatric patients (n = 309; 62 major depressive disorder, 58 bipolar I disorder, and 189 bipolar II disorder) were gathered from their medical records and were utilized in an exploratory factor analysis to clarify the underlying components of MI. Then, anonymous survey data from 288 individuals from the general population were included in the analysis as a comparison group. Associations between MIQ-T and other previously validated clinical instruments for mood disorders were examined to test external validity. Results: The exploratory factor analysis demonstrated that the five-factor structure (Lability, Upward Tendency, Downward Tendency, Childhood Instability, and Seasonality) of 59 items was the most appropriate with clear, cohesive features. MIQ-T exhibited high internal consistency (α = 0.96) and moderate to strong correlations with other previously validated clinical instruments, which were consistent with theoretical predictions, providing evidence of criterion validity. Short forms were also created to address the high internal consistency value, which can indicate redundancy, and to increase the approachability of the measure. We found that the patients with bipolar II disorder had higher MIQ-T scores than the patients with bipolar I disorder or major depressive disorder and the comparison group. Conclusion: Together, these findings validate the newly developed MIQ-T as an instrument of mood instability. MIQ-T can be a potential research tool for mood disorder.
Assuntos
Transtorno Bipolar , Transtorno Depressivo Maior , Criança , Transtorno Depressivo Maior/diagnóstico , Humanos , Transtornos do Humor/diagnóstico , Fenótipo , Reprodutibilidade dos Testes , Inquéritos e QuestionáriosRESUMO
Integrated with heat-generating devices, a Li-ion battery (LIB) often operates at 20-40 °C higher than the ordinary working temperature. Although macroscopic investigation of the thermal contribution has shown a significant reduction in the LIB performance, the molecular level structural and chemical origin of battery aging in a mild thermal environment has not been elucidated. On the basis of the combined experiments of the electrochemical measurements, Cs-corrected electron microscopy, and in situ analyses, we herein provide operando structural and chemical insights on how a mild thermal environment affects the overall battery performance using anatase TiO2 as a model intercalation compound. Interestingly, a mild thermal condition induces excess lithium intercalation even at near-ambient temperature (45 °C), which does not occur at the ordinary working temperature. The anomalous intercalation enables excess lithium storage in the first few cycles but exerts severe intracrystal stress, consequently cracking the crystal that leads to battery aging. Importantly, this mild thermal effect is accumulated upon cycling, resulting in irreversible capacity loss even after the thermal condition is removed. Battery aging at a high working temperature is universal in nearly all intercalation compounds, and therefore, it is significant to understand how the thermal condition contributes to battery aging for designing intercalation compounds for advanced battery electrode materials.
RESUMO
In this study, we demonstrate that the initial morphology of nanoparticles can be transformed into small fragmented nanoparticles, which were densely contacted to each other, during electrochemical CO2 reduction reaction (CO2RR). Cu-based nanoparticles were directly grown on a carbon support by using cysteamine immobilization agent, and the synthesized nanoparticle catalyst showed increasing activity during initial CO2RR, doubling Faradaic efficiency of C2H4 production from 27% to 57.3%. The increased C2H4 production activity was related to the morphological transformation over reaction time. Twenty nm cubic Cu2O crystalline particles gradually experienced in situ electrochemical fragmentation into 2-4 nm small particles under the negative potential, and the fragmentation was found to be initiated from the surface of the nanocrystal. Compared to Cu@CuO nanoparticle/C or bulk Cu foil, the fragmented Cu-based NP/C catalyst achieved enhanced C2+ production selectivity, accounting 87% of the total CO2RR products, and suppressed H2 production. In-situ X-ray absorption near edge structure studies showed metallic Cu0 state was observed under CO2RR, but the fragmented nanoparticles were more readily reoxidized at open circuit potential inside of the electrolyte, allowing labile Cu states. The unique morphology, small nanoparticles stacked upon on another, is proposed to promote C-C coupling reaction selectivity from CO2RR by suppressing HER.
RESUMO
The electrocatalytic conversion of CO2 into value-added fuels has received increasing attention as a promising way to mitigate the atmospheric CO2 concentration and close the broken carbon-cycle. Early studies, focused on polycrystalline metal electrodes, outlined in detail the overall trends in the catalytic activity and product selectivity of pure metals; however, several inherent limitations were found, such as low current density and high overpotential, which hindered electrocatalytic CO2 reduction from practical application. Fortunately, the recent development of precisely synthesized nanocatalysts has led to several breakthroughs in catalytic CO2 conversion. By carefully controlling the thermodynamic adsorption energies and flow dynamics of reaction intermediates, nanosized electrocatalysts afford more versatile and energetically efficient routes to convert CO2 into desired chemicals. In this article, we review the state-of-the-art nanocatalysts applied for CO2 conversion and discuss newly found phenomena at the local environment near the catalyst surface. The mechanistic understanding of these findings can provide insight into the future design of catalysts for the efficient and selective reduction of CO2.
RESUMO
Titanium dioxide (TiO2) with exposed (001) facets (TiO2(001)) has attractive photocatalytic properties. However, the high recombination rate of the photo-excited charge carriers on this surface often limits its application. Here, we report that a few-layered 1T-MoS2 coating on TiO2(001) nanosheets (abbreviated as MST) can be a promising candidate that overcomes some of the challenges of TiO2(001). Computational and experimental results demonstrate that MST as a photocatalyst exhibits a significantly low-charge recombination rate as well as excellent long-term durability. The synthesized MST 2D nanocomposites show a 31.9% increase in photocatalytic activity for hydrogen (H2) production relative to the counterpart TiO2(001). MST offers a new route for further improvement of the photocatalytic activity of TiO2 with exposed high energy facets.
RESUMO
Owing to the relatively high conductivity and unique redox behavior, polyaniline (PANI) has been one of the most technologically promising conducting polymers. Although various methodologies have been developed, fabrication of PANI microfibers has been a challenging task owing to the poor solubility in most organic solvents. By taking advantage of a microfluidic technology and organic soluble acid labile t-Boc-protected PANI (t-Boc-PANI) as the conducting polymer precursor, fabrication of PANI microfibers in a size-controlled manner is possible. Introduction of a THF solution containing t-Boc-PANI, and dodecylbenzenesulfonic acid (DBSA) as a core flow, and water as a sheath flow into a microfluidic channel with a 3D hydrodynamic focusing effect results in crystallization of the polymer fiber. By changing the flow rate, linear PANI microfibers that range from 16.2 to 39.4 µm in diameter are readily obtained.
Assuntos
Compostos de Anilina/química , Microfluídica/métodos , Benzenossulfonatos/química , Cristalização , Condutividade Elétrica , Furanos/química , Hidrodinâmica , Microfluídica/instrumentação , Tamanho da Partícula , Solubilidade , Propriedades de Superfície , Água/químicaRESUMO
A particle-based photocatalyst with a permanent internal field prepared by a corona poling method is presented as a novel approach to enhance the hydrogen evolution reaction in a particulate-suspension system. Photocatalytic activity of K0.5Na0.5NbO3 was significantly improved by 7.4 times after the polarization.
RESUMO
Pulsed electrolysis has emerged as a promising approach to CO2 reduction, offering a simple method to adjust product selectivity and enhance operational stability. However, conceptually applying the dynamic pulse operation process on a large scale highlights its differences when compared to conventional electrolysis processes, impacting the economic feasibility of the process. We discuss the influence of pulsed electrolysis on surface reaction mechanisms and the simulation of changes at both the continuum and smaller scales through computational modeling. Additionally, we point out considerations for applying pulsed CO2 electrolysis to a large-scale process and assess their economic implications, comparing pulsed electrolysis with constant electrolysis.
RESUMO
Inducing strain in the lattice effectively enhances the intrinsic activity of electrocatalysts by shifting the metal's d-band center and tuning the binding energy of reaction intermediates. NiFe-layered double hydroxides (NiFe LDHs) are promising electrocatalysts for the oxygen evolution reaction (OER) due to their cost-effectiveness and high catalytic activity. The distorted ß-NiOOH phase produced by the Jahn-Teller effect under the oxidation polarization is known to exhibit superior catalytic activity, but it eventually transforms to the undistorted γ-NiOOH phase during the OER process. Such a reversible lattice distortion limits the OER activity. In this study, we propose a facile boron tungstate (BWO) anion intercalation method to induce irreversible lattice distortion in NiFe LDHs, leading to significantly enhanced OER activity. Strong interactions with BWO anions induce significant stress on the LDH's metal-hydroxide slab, leading to an expansion of metal-oxygen bonds and subsequent lattice distortion. In situ Raman spectroscopy revealed that lattice-distorted NiFe LDHs (D-NiFe LDHs) stabilize the ß-NiOOH phase under the OER conditions. Consequently, D-NiFe LDHs exhibited low OER overpotentials (209 and 276 mV for 10 and 500 mA cm-2, respectively), along with a modest Tafel slope (33.4 mV dec-1). Moreover, D-NiFe LDHs demonstrated excellent stability at 500 mA cm-2 for 50 h, indicating that the lattice distortion of the LDHs is irreversible. The intercalation-induced lattice strain reported in this study can provide a general strategy to enhance the activity of electrocatalysts.
RESUMO
Recent consecutive discoveries of various 2D materials have triggered significant scientific and technological interests owing to their exceptional material properties, originally stemming from 2D confined geometry. Ever-expanding library of 2D materials can provide ideal solutions to critical challenges facing in current technological trend of the fourth industrial revolution. Moreover, chemical modification of 2D materials to customize their physical/chemical properties can satisfy the broad spectrum of different specific requirements across diverse application areas. This review focuses on three particular emerging application areas of 2D materials: smart fibers, soft robotics, and single atom catalysts (SACs), which hold immense potentials for academic and technological advancements in the post-artificial intelligence (AI) era. Smart fibers showcase unconventional functionalities including healthcare/environmental monitoring, energy storage/harvesting, and antipathogenic protection in the forms of wearable fibers and textiles. Soft robotics aligns with future trend to overcome longstanding limitations of hard-material based mechanics by introducing soft actuators and sensors. SACs are widely useful in energy storage/conversion and environmental management, principally contributing to low carbon footprint for sustainable post-AI era. Significance and unique values of 2D materials in these emerging applications are highlighted, where the research group has devoted research efforts for more than a decade.
RESUMO
Despite the great potential of solid oxide electrochemical cells (SOCs) as highly efficient energy conversion devices, the undesirable high operating temperature limits their wider applicability. Herein, a novel approach to developing high-performance low-temperature SOCs (LT-SOCs) is presented through the use of an Er, Y, and Zr triple-doped bismuth oxide (EYZB). This study demonstrates that EYZB exhibits > 147 times higher ionic conductivity of 0.44 S cm-1 at 600 °C compared to commercial Y-stabilized zirconia electrolyte with excellent stability over 1000 h. By rationally incorporating EYZB in composite electrodes and bilayer electrolytes, the zirconia-based electrolyte LT-SOC achieves the unprecedentedly high performance of 3.45 and 2.02 W cm-2 in the fuel cell mode and 2.08 and 0.95 A cm-2 in the electrolysis cell mode at 700 °C and 600 °C, respectively. Further, a distinctive microstructural feature of EYZB that largely extends triple phase boundary at the interface is revealed through digital twinning. This work provides insights for developing high-performance LT-SOCs.
RESUMO
Developing a non-noble metal-based bifunctional electrocatalyst with high efficiency and stability for overall water splitting is desirable for renewable energy systems. We developed a novel method to fabricate a heterostructured electrocatalyst, comprising a NiCoP nanoneedle array grown on Ti3C2Tx MXene-coated Ni foam (NCP-MX/NF) using a dip-coating hydrothermal method, followed by phosphorization. Due to the abundance of active sites, enhanced electronic kinetics, and sufficient electrolyte accessibility resulting from the synergistic effects of NCP and MXene, NCP-MX/NF bifunctional alkaline catalysts afford superb electrocatalytic performance, with a low overpotential (72 mV at 10 mA cm-2 for HER and 303 mV at 50 mA cm-2 for OER), a low Tafel slope (49.2 mV dec-1 for HER and 69.5 mV dec-1 for OER), and long-term stability. Moreover, the overall water splitting performance of NCP-MX/NF, which requires potentials as low as 1.54 and 1.76 V at a current density of 10 and 50 mA cm-2, respectively, exceeded the performance of the Pt/Câ¥IrO2 couple in terms of overall water splitting. Density functional theory (DFT) calculations for the NCP/Ti3C2O2 interface model predicted the catalytic contribution to interfacial formation by analyzing the electronic redistribution at the interface. This contribution was also evaluated by calculating the adsorption energetics of the descriptor molecules (H2O and the H and OER intermediates).
RESUMO
Air pollution by particulate matter (PM) and airborne pathogens causes severe health problems in the human body. Presently, popular disposable air filters yield huge waste and have a fatal impact on the environment. Postuse cleaning of air filters also leads to secondary air and water pollution. Here, we report a sunlight-driven self-cleaning PM filter by coupling a full-solar-spectrum-active photocatalyst comprising up-conversion nanoparticles (UCNPs) decorated with semiconductor iron(III) oxide (UCNP@α-Fe2O3) shells stabilized upon graphene functionalized borosilicate fibrous membrane (rGO-BF). While rGO-BF ensures high PM adsorption, UCNP@α-Fe2O3 (NP) enables self-photodegradation of adsorbed PM under abundant sunlight and subsequent membrane regeneration, while preventing secondary air or water pollution. Rational surface chemistry and optimal microstructure enable our filters to remove >99% of PM2.5 under deplorable air-quality conditions. Moreover, our filter shows excellent antibacterial activity toward E. coli and S. aureus, demonstrating its potential for practical utilization in face masks, air filtering devices, and protective medical wear. This work successfully suggests an intriguing design platform for self-sustainable zero-waste air filter membranes.