Boosting the Energy Density of Bowl-Like MnO2@Carbon Through Lithium-Intercalation in a High-Voltage Asymmetric Supercapacitor with "Water-In-Salt" Electrolyte.

Highly concentrated "'water-in-salt"' (WIS) electrolytes are promising for high-performance energy storage devices due to their wide electrochemical stability window. However, the energy storage mechanism of MnO2 in WIS electrolytes-based supercapacitors remains unclear. Herein, MnO2 nanoflowers are successfully grown on mesoporous bowl-like carbon (MBC) particles to generate MnO2/MBC composites, which not only increase electroactive sites and inhibit the pulverization of MnO2 particles during the fast charging/discharging processes, but also facilitate the electron transfer and ion diffusion within the whole electrode, resulting in significant enhancement of the electrochemical performance. An asymmetric supercapacitor, assembled with MnO2/MBC and activated carbon (AC) and using 21 m LiTFSI solution as the WIS electrolyte, delivers an ultrahigh energy density of 70.2 Wh kg-1 at 700 W kg-1, and still retains 24.8 Wh kg-1 when the power density is increased to 28 kW kg-1. The ex situ XRD, Raman, and XPS measurements reveal that a reversible reaction of MnO2 + xLi+ + xe-↔LixMnO2 takes place during charging and discharging. Therefore, the asymmetric MnO2/MBC//AC supercapacitor with LiTFSI electrolyte is actually a lithium-ion hybrid supercapacitor, which can greatly boost the energy density of the assembled device and expand the voltage window.

Detection of two homologous major QTLs and development of diagnostic molecular markers for sucrose content in peanut.

KEY MESSAGE: We identified two stable and homologous major QTLs for sucrose content in peanut, and developed breeder-friendly molecular markers for marker-assisted selection breeding. Sucrose content is a crucial quality trait for edible peanuts, and increasing sucrose content is a key breeding objective. However, the genetic basis of sucrose content in peanut remains unclear, and major quantitative trait loci (QTLs) for sucrose content have yet to be identified. In this study, a high-density genetic map was constructed based on whole-genome re-sequencing data from a peanut RIL population. This map consisted of 2,042 bins and 24,142 SNP markers, making it one of the most comprehensive maps to date in terms of marker density. Two major QTLs (qSCA06.2 and qSCB06.2) were identified, explaining 31.41% and 24.13% of the phenotypic variance, respectively. Notably, these two QTLs were located in homologous genomic regions between the A and B subgenomes. The elite allele of qSCA06.2 was exclusive to Valencia-type, while the elite allele of qSCB06.2 existed in other peanut types. Importantly, the distribution of alleles from two homologous QTLs in the RIL population and diverse germplasm accessions consistently demonstrated that only the combination of elite allelic genotypes from both QTLs/genes resulted in a significantly dominant phenotype, accompanied by a substantial increase in sucrose content. The newly developed diagnostic markers for these QTLs were confirmed to be reliable and could facilitate future breeding efforts to enhance sucrose content using marker-assisted selection techniques. Overall, this study highlights the co-regulation of sucrose content by two major homologous QTLs/genes and provides valuable insights into the genetic basis of sucrose in peanuts.

Identification of QTLs associated with very-long chain fatty acid (VLCFA) content via linkage mapping and BSA-seq in peanut.

KEY MESSAGE: Three major QTLs qA01, qB04.1 and qB05 for VLCFA content and their corresponding allele-specific markers will benefit peanut low VLCFA breeding, and a candidate gene Arahy.IF1JV3 was predicted. Peanut is a globally significant oilseed crop worldwide, and contains a high content (20%) of saturated fatty acid (SFA) in its seeds. As high level SFA intake in human dietary may increase the cardiovascular disease risk, reducing the SFA content in peanut is crucial for improving its nutritional quality. Half of the SFAs in peanut are very long-chain fatty acids (VLCFA), so reducing the VLCFA content is a feasible strategy to decrease the total SFA content. Luoaowan with extremely low VLCFA (4.80%) was crossed with Jihua16 (8.00%) to construct an F2:4 population. Three major QTLs including qA01, qB04.1 and qB05 for VLCFA content were detected with 4.43 ~ 14.32% phenotypic variation explained through linkage mapping. Meanwhile, three genomic regions on chromosomes B03, B04 and B05 were identified via BSA-seq approach. Two co-localized intervals on chromosomes B04 (100.10 ~ 103.97 Mb) and B05 (6.39 ~ 10.90 Mb) were identified. With markers developed based on SNP/InDel variations in qA01 between the two parents, the remaining interval was refined to 103.58 ~ 111.14 Mb. A candidate gene Arahy.IF1JV3 encoding a ß-ketoacyl-CoA synthase was found in qA01, and its expression level in Luoaowan was significantly lower than that in Jihua16. Allele-specific markers targeting qA01, qB04.1 and qB05 were developed and validated in F4 population, and an elite line with high oleic, low VLCFA (5.05%) and low SFA (11.48%) contents was selected. This study initially revealed the genetic mechanism of VLCFA content, built a marker-assisted selection system for low VLCFA breeding, and provided an effective method to decrease the SFA content in peanut.

Unique gap-related SERS behaviors ofp-aminothiophenol molecules absorbed on TiO2surface in periodic TiO2/Ni nanopillar arrays.

We observed a unique interpillar gap-related surface-enhanced Raman scattering (SERS) behavior ofp-aminothiophenol (PATP) molecules from periodic TiO2nanopillar arrays with three gap sizes of 191, 297 and 401 nm, which is completely different from that on Ag and Ni nanopillar arrays. Especially, the gap-size-dependent charge-transfer (CT) resonance enhancement from TiO2/Ni has been indicated through comparisons of variation trend of SERS intensities with inter-pillar gap size between TiO2/Ni and Ag/TiO2/Ni as well as Ni nanoarrays, and been confirmed by spectra of ultraviolet-visible absorption and photoluminescence. Results demonstrate that the CT resonance enhancement is more susceptible to the change of the gap size compared with the surface plasmon resonance (SPR) enhancement in TiO2/Ni nanoarrays. Hence, SPR and CT enhancement showing different variation trend and rate with the gap size that leads to a different relative contribution of CT resonance to the overall SERS enhancement as gap size changes, and consequently results in a unique gap-related SERS behavior for TiO2/Ni nanoarrays. The present study is not only helpful for investigating SERS mechanism for semiconductors but also providing a method to design and optimize periodic metal/semiconductor SERS substrates in a controllable way.

Clustering-resistant Cu Single Atoms on Porous Au Nanoparticles Supported by TiO2 for Sustainable Photoconversion of CO2 into CH4.

Photocatalysts based on single atoms (SAs) modification can lead to unprecedented reactivity with recent advances. However, the deactivation of SAs-modified photocatalysts remains a critical challenge in the field of photocatalytic CO2 reduction. In this study, we unveil the detrimental effect of CO intermediates on Cu single atoms (Cu-SAs) during photocatalytic CO2 reduction, leading to clustering and deactivation on TiO2. To address this, we developed a novel Cu-SAs anchored on Au porous nanoparticles (CuAu-SAPNPs-TiO2) via a vectored etching approach. This system not only enhances CH4 production with a rate of 748.8 µmol·g-1·h-1 and 93.1% selectivity but also mitigates Cu-SAs clustering, maintaining stability over 7 days. This sustained high performance, despite the exceptionally high efficiency and selectivity in CH4 production, highlights the CuAu-SAPNPs-TiO2 overarching superior photocatalytic properties. Consequently, this work underscores the potential of tailored SAs-based systems for efficient and durable CO2 reduction by reshaping surface adsorption dynamics and optimizing the thermodynamic behavior of the SAs.

Genome-wide analysis of UDP-glycosyltransferase gene family and identification of a flavonoid 7-O-UGT (AhUGT75A) enhancing abiotic stress in peanut (Arachis hypogaea L.).

BACKGROUND: Glycosylation, catalyzed by UDP-glycosyltransferase (UGT), was important for enhancing solubility, bioactivity, and diversity of flavonoids. Peanut (Arachis hypogaea L.) is an important oilseed and cash crop worldwide. In addition to provide high quality of edible oils and proteins, peanut seeds contain a rich source of flavonoid glycosides that benefit human health. However, information of UGT gene family was quite limited in peanut. RESULTS: In present study, a total of 267 AhUGTs clustered into 15 phylogenetic groups were identified in peanut genome. Group I has greatly expanded to contain the largest number of AhUGT genes. Segmental duplication was the major driving force for AhUGT gene family expansion. Transcriptomic analysis of gene expression profiles in various tissues and under different abiotic stress treatments indicated AhUGTs were involved in peanut growth and abiotic stress response. AhUGT75A (UGT73CG33), located in mitochondria, was characterized as a flavonoid 7-O-UGT by in vitro enzyme assays. The transcript level of AhUGT75A was strongly induced by abiotic stress. Overexpression of AhUGT75A resulted in accumulating less amount of malondialdehyde (MDA) and superoxide, and enhancing tolerance against drought and/or salt stress in transgenic Arabidopsis. These results indicated AhUGT75A played important roles in conferring abiotic stress tolerance through reactive oxygen species scavenging. CONCLUSIONS: Our research only not provides valuable information for functional characterization of UGTs in peanut, but also gives new insights into potential applications in breeding new cultivars with both desirable stress tolerance and health benefits.

Boosting Material Utilization via Direct Growth of Zn2 (V3 O8 )2 on the Carbon Cloth as a Cathode to Achieve a High-Capacity Aqueous Zinc-Ion Battery.

Aqueous zinc-ion batteries (AZIBs) have attracted the attention of researchers because of their high theoretical capacity and safety. Among the many vanadium-based AZIB cathode materials, zinc vanadate is of great interest as a typical phase in the dis-/charge process. Here, a remarkable method to improve the utilization rate of zinc vanadate cathode materials is reported. In situ growth of Zn2 (V3 O8 )2 on carbon cloth (CC) as the cathode material (ZVO@CC) of AZIBs. Compared with the Zn2 (V3 O8 )2 cathode material bonded on titanium foil (ZVO@Ti), the specific capacity increases from 300 to 420 mAh g-1 , and the utilization rate of the material increases from 69.60% to 99.2%. After the flexible device is prepared, it shows the appropriate specific capacity (268.4 mAh g-1 at 0.1 A g-1 ) and high safety. The method proposed in this work improves the material utilization rate and enhances the energy density of AZIB and also has a certain reference for the other electrochemical energy storage devices.

Fundamental Understanding of Nonaqueous and Hybrid Na-CO2 Batteries: Challenges and Perspectives.

Alkali metal-CO2 batteries, which combine CO2 recycling with energy conversion and storage, are a promising way to address the energy crisis and global warming. Unfortunately, the limited cycle life, poor reversibility, and low energy efficiency of these batteries have hindered their commercialization. Li-CO2 battery systems have been intensively researched in these aspects over the past few years, however, the exploration of Na-CO2 batteries is still in its infancy. To improve the development of Na-CO2 batteries, one must have a full picture of the chemistry and electrochemistry controlling the operation of Na-CO2 batteries and a full understanding of the correlation between cell configurations and functionality therein. Here, recent advances in CO2 chemical and electrochemical mechanisms on nonaqueous Na-CO2 batteries and hybrid Na-CO2 batteries (including O2 -involved Na-O2 /CO2 batteries) are reviewed in-depth and comprehensively. Following this, the primary issues and challenges in various battery components are identified, and the design strategies for the interfacial structure of Na anodes, electrolyte properties, and cathode materials are explored, along with the correlations between cell configurations, functional materials, and comprehensive performances are established. Finally, the prospects and directions for rationally constructing Na-CO2 battery materials are foreseen.

Suppressing the Intrinsic Photoelectric Response of Organic Semiconductors for Highly-Photostable Organic Transistors.

Suppressing the photoelectric response of organic semiconductors (OSs) is of great significance for improving the operational stability of organic field-effect transistors (OFETs) in light environments, but it is quite challenging because of the great difficulty in precisely modulating exciton dynamics. In this work, photostable OFETs are demonstrated by designing the micro-structure of OSs and introducing an electrical double layer at the OS/polyelectrolyte dielectric interface, in which multiple exciton dynamic processes can be modulated. The generation and dissociation of excitons are depressed due to the small light-absorption area of the microstripe structure and the excellent crystallinity of OSs. At the same time, a highly efficient exciton quenching process is activated by the electrical double layer at the OS/polyelectrolyte dielectric interface. As a result, the OFETs show outstanding tolerance to the light irradiation of up to 306 mW·cm-2 , which far surpasses the solar irradiance value in the atmosphere (≈138 mW·cm-2 ) and achieves the highest photostability ever reported in the literature. The findings promise a general and practicable strategy for the realization of photostable OFETs and organic circuits.

General Spatial Confinement Recrystallization Method for Rapid Preparation of Thickness-Controllable and Uniform Organic Semiconductor Single Crystals.

Organic semiconductor single crystals (OSSCs) are ideal materials for studying the intrinsic properties of organic semiconductors (OSCs) and constructing high-performance organic field-effect transistors (OFETs). However, there is no general method to rapidly prepare thickness-controllable and uniform single crystals for various OSCs. Here, inspired by the recrystallization (a spontaneous morphological instability phenomenon) of polycrystalline films, a spatial confinement recrystallization (SCR) method is developed to rapidly (even at several second timescales) grow thickness-controllable and uniform OSSCs in a well-controlled way by applying longitudinal pressure to tailor the growth direction of grains in OSCs polycrystalline films. The relationship between growth parameters including the growth time, temperature, longitudinal pressure, and thickness is comprehensively investigated. Remarkably, this method is applicable for various OSCs including insoluble and soluble small molecules and polymers, and can realize the high-quality crystal array growth. The corresponding 50 dinaphtho[2,3-b:2″,3″-f]thieno[3,2-b]thiophene (DNTT) single crystals coplanar OFETs prepared by the same batch have the mobility of 4.1 ± 0.4 cm2 V-1 s-1 , showing excellent uniformity. The overall performance of the method is superior to the reported methods in term of growth rate, generality, thickness controllability, and uniformity, indicating its broad application prospects in organic electronic and optoelectronic devices.

Identification of a stable major sucrose-related QTL and diagnostic marker for flavor improvement in peanut.

KEY MESSAGE: An InDel marker closely linked with a major and stable quantitative trait locus (QTL) on chromosome A08, qSUCA08.2, controlling sucrose content will benefit peanut flavor improvement. Sucrose is the main soluble sugar in mature peanut kernel, and its content is a key determinant of flavor. However, the genetic basis of sucrose content in peanut remains poorly understood, which limits the progress of flavor improvement. In the present study, two genomic regions (qSUCA08a and qSUCB06a) for sucrose content on chromosomes A08 and B06 were identified by QTL-seq in a RIL population derived from a cross between Zhonghua 10 and ICG 12625. In the interval of qSUCB06a, QTL qSUCB06.2 was detected through QTL mapping in a single environment. The qSUCA08a was further dissected into 3 adjacent genomic regions using linkage analysis including a major QTL qSUCA08.2 explaining 5.43-17.84% phenotypic variation across five environments. A 61-bp insertion at position 35,099,320 in the higher sucrose parent ICG 12625 was found in qSUCA08.2. An InDel marker SUC.InDel.A08 based on the insertion/deletion polymorphism was developed and validated within a natural population containing 172 peanut cultivars in two environments. The mean sucrose content of 93 cultivars with ICG 12625 allele was significantly higher than that of 79 cultivars with Zhonghua 10 allele. The qSUCA08.2 corresponding to a 2.11 Mb interval harbored 110 genes. Among these genes, a total of 19 genes were considered as candidate genes including 5 non-synonymous mutation genes and 14 differentially expressed genes during seed development. These results provide new insights into the genetic basis of sucrose regulation in peanut and benefit the breeding program for developing new varieties with excellent flavor.

Methionine sulfoxide suppresses adipogenic differentiation by regulating the mitogen-activated protein kinase signaling pathway.

In this study, methionine sulfoxide (MetO) was identified as an active metabolite that suppresses adipogenesis after screening obese individuals versus the normal population. MetO suppressed the gene and protein expression of CCAAT/enhancer binding protein (C/EBP) α, adipocyte fatty acid binding protein 4 (FABP4), and the nuclear receptor peroxisome proliferator-activated receptor γ (PPARγ) during human preadipocyte (HPA) differentiation. Adipogenesis decreased following MetO treatment; however, the preadipocyte number, proliferation, and apoptosis were unaffected. The activity of phosphorylated extracellular signal-related kinase (P-ERK) of the mitogen-activated protein kinase (MAPK) pathway was significantly inhibited in HPA after MetO treatment. Furthermore, treatment of preadipocytes with the selective P-ERK1/2 agonist Ro 67-7476 abolished the effect of MetO against adipogenesis suggesting that MetO function is dependent on the MAPK pathway. The mechanistic insights of adipogenesis suppression by MetO presented in this study shows its potential as an antiobesity drug.

High-purity graphene and carbon nanohorns prepared by base-acid treated waste tires carbon via direct current arc plasma.

As the accumulation of waste tires continues to rise year by year, effectively managing and recycling these discarded materials has become an urgent global challenge. Among various potential solutions, pyrolysis stands out due to its superior environmental compatibility and remarkable efficiency in transforming waste tires into valuable products. Thus, it is considered the most potential method for disposing these tires. In this work, waste tire powder is pyrolyzed at 560 °C to yield pyrolysis carbon black, and meanwhile, the purification effects of base-acid solutions on pyrolysis carbon black are discussed. High-purity few-layer graphene flakes and carbon nanohorns are synthesized by a direct current arc plasma with H2 and N2 as buffer gases and high-purity pyrolysis carbon black as raw material. Under an H2 atmosphere, hydrogen effectively terminates the suspended carbon bonds, preventing the formation of closed structures and facilitating the expansion of graphene sheets. During the preparation of carbon nanohorns, the nitrogen atoms rapidly bond with carbon atoms, forming essential C-N bonds. This nitrogen doping promotes the formation of carbon-based five-membered and seven-membered rings and makes the graphite lamellar change in the direction of towards negative curvature. Consequently, such change facilitates the formation of conical structures, ultimately yielding the coveted carbon nanohorns. This work not only provides an economical raw material for efficient large-scale synthesis of few-layer graphene and carbon nanohorns but also broadens the intrinsic worth of pyrolysis carbon black, which is beneficial to improving the recycling value of waste tires.

First Report of Peanut Black Pod Rot Caused by Berkeleyomyces rouxiae in China.

Peanut (Arachis hypogaea L.) is an important oilseed and cash crop cultivated in over 100 countries worldwide. The major producers are China, India and USA (Ding et al. 2022). In September 2022, peanut pods exhibiting black necrotic symptoms on the shell surface were observed in Puyang, Henan Province, China. These black spots often merged to form larger necrotic spots on the shell. Disease incidence was 100% in susceptible varieties. Symptomatic shell pieces were surface sterilized with 75% ethanol for 3 min, rinsed three times with sterile water, and then transferred onto PDA medium supplemented with 25 µg/ml chloramphenicol (Long et al. 2022). Isolation frequency of a fungus with similar-appearing colonies from symptomatic pods was 81.7%. A pure culture of a representative isolate, PYHB, was obtained through single-sporing and maintained on PDA plates at 25℃ in darkness. The colony initially appeared white but turned black within 2 days. The isolate produced dark brown, unicellular chlamydospores, which were arranged in club-shaped chains consisting of two to seven cells. The size of the unicellular chlamydospores varied from 3.34 to 15.27 µm (average:6.81, n = 100) in length and 8.30 to 15.51 µm (average:11.29, n = 100) in width. The endoconidia were hyaline and cylindrical, measuring 7.91-22.94 × 1.69-4.81 µm (average: 12.16 × 3.13, n = 100). Based on morphological characteristics, the isolate was tentatively identified as a Berkeleyomyces sp. (Nel et al. 2018; Long et al. 2022). The ITS region of r-DNA, the ribosomal large subunit (LSU), the minichromosome maintenance complex component 7 (MCM7), and the 60S ribosomal protein RPL10 (60S) genes were amplified using ITS1/ITS4, LR0R/LR5, rouxMCM7-F/rouxMCM7-R and roux60s-F/roux60s-R primers, respectively (White et al. 1990; Vilgalys and Hester 1990; Nakane and Usami 2020). The sequences were deposited in GenBank (ITS: OR053803; LSU: OR053818; MCM7: OR058549; 60S: OR060656). Through BLASTn analysis of the NCBI GenBank database, the generated ITS and LSU sequences showed 100% identity to Berkeleyomyces rouxiae (GenBank MF952418.1 and MF948662.1, respectively) and B. basicola (GenBank MT221585.1 and MH868639.1, respectively). Importantly, the MCM7 and 60S sequences were 100% identical to B. rouxiae (GenBank MF967114.1 and MF967077.1, respectively). Phylogenetic analysis combining ITS, LSU, MCM7, and 60S sequences showed that the isolate PYHB clustered with B. rouxiae. To evaluate pathogenicity, surface-sterilized healthy peanut pods (n = 90) were immersed in a 1×106 spore/ml conidial suspension obtained from isolate PYHB for 5 min and placed in Petri dishes containing moistened cotton at 25°C for 10 days. Pods (n = 90) inoculated with sterile water served as controls. Inoculated pods displayed black necrosis 10 days after inoculation (dai), whereas no symptoms were observed on the control pods at 21 dai. The reisolated pathogen was shown to be identical to the original inoculum through morphological and phylogenetic analysis. Black root rot is a fungal disease caused by Berkeleyomyces spp. (syn. Thielaviopsis spp.) and affects various crops and ornamentals, such as cotton, tobacco, carrot, holly, and pansy (Rahnama et al. 2022). The causal agents B. rouxiae and B. basicola have similar morphological characteristics but can be differentiated through molecular characterization (Nel et al. 2018). To our knowledge, this is the first report of black pod rot in peanut caused by B. rouxiae in China. The finding from this study will contribute to the development of monitoring and management strategies to combat this destructive disease in peanut cultivation.

Comprehensive evaluation of Chinese peanut mini-mini core collection and QTL mapping for aflatoxin resistance.

BACKGROUND: Aflatoxin contamination caused by Aspergillus fungi has been a serious factor affecting food safety of peanut (Arachis hypogaea L.) because aflatoxins are highly harmful for human and animal health. As three mechanisms of resistance to aflatoxin in peanut including shell infection resistance, seed infection resistance and aflatoxin production resistance exist among naturally evolved germplasm stocks, it is highly crucial to pyramid these three resistances for promoting peanut industry development and protecting consumers' health. However, less research effort has been made yet to investigate the differentiation and genetic relationship among the three resistances in diversified peanut germplasm collections. RESULTS: In this study, the Chinese peanut mini-mini core collection selected from a large basic collection was systematically evaluated for the three resistances against A. flavus for the first time. The research revealed a wide variation among the diversified peanut accessions for all the three resistances. Totally, 14 resistant accessions were identified, including three with shell infection resistance, seven with seed infection resistance and five with aflatoxin production resistance. A special accession, Zh.h1312, was identified with both seed infection and aflatoxin production resistance. Among the five botanic types of A. hypogaea, the var. vulgaris (Spanish type) belonging to subspecies fastigiata is the only one which possessed all the three resistances. There was no close correlation between shell infection resistance and other two resistances, while there was a significant positive correlation between seed infection and toxin production resistance. All the three resistances had a significant negative correlation with pod or seed size. A total of 16 SNPs/InDels associated with the three resistances were identified through genome-wide association study (GWAS). Through comparative analysis, Zh.h1312 with seed infection resistance and aflatoxin production resistance was also revealed to possess all the resistance alleles of associated loci for seed infection index and aflatoxin content. CONCLUSIONS: This study provided the first comprehensive understanding of differentiation of aflatoxin resistance in diversified peanut germplasm collection, and would further contribute to the genetic enhancement for resistance to aflatoxin contamination.

Efficient Organic Solar Cells Enabled by Simple Non-Fused Electron Donors with Low Synthetic Complexity.

Fused-ring electron donors boost the efficiency of organic solar cells (OSCs), but they suffer from high cost and low yield for their large synthetic complexity (SC > 30%). Herein, the authors develop a series of simple non-fused-ring electron donors, PF1 and PF2, which alternately consist of furan-3-carboxylate and 2,2'-bithiophene. Note that PF1 and PF2 present very small SC of 9.7% for their inexpensive raw materials, facile synthesis, and high synthetic yield. Compared to their all-thiophene-backbone counterpart PT-E, two new polymers feature larger conjugated plane, resulting in higher hole mobility for them, especially a value up to ≈10-4 cm2 V-1 ·s for PF2 with longer alkyl side chain. Meanwhile, PF1 and PF2 exhibit larger dielectric constant and deeper electronic energy level versus PT-E. Benefiting from the better physicochemical properties, the efficiencies of PF1- and PF2-based devices are improved by ≈16.7% and ≈71.3% relative to that PT-E-based devices, respectively. Furthermore, the optimized PF2-based devices with introducing PC71 BM as the third component deliver a higher efficiency of 12.40%. The work not only indicates that furan-3-carboxylate is a simple yet efficient building block for constructing non-fused-ring polymers but also provides a promising electron donor PF2 for the low-cost production of OSCs.

Improving the imaging diagnostic strategy for pulmonary artery masses based on 18F-FDG PET/CT integrated with CTPA.

OBJECTIVE: To evaluate the diagnostic accuracy of computed tomography pulmonary angiography (CTPA) and 18F-fluorodeoxyglucose positron emission tomography/computed tomography (18F-FDG PET/CT) for pulmonary artery (PA) masses. METHODS: Of 2889 patients with PA filling defects of PA on CTPA, 79 consecutive patients suspicious for PA malignancy who subsequently underwent 18F-FDG PET/CT were enrolled. All masses were diagnosed on the basis of pathological findings or clinical imaging follow-up. For each mass, morphological CT signs, standardized uptake value (SUVmax and SUVmean), metabolic tumor volume (MTV), and total lesion glycolysis (TLG) on 18F-FDG PET/CT were used as diagnostic markers. RESULTS: Expansive growth, irregular margin, invasion, CT contrast uptake, and wall eclipse sign were strongly associated with the malignant nature of masses. The coexistence of at least 5 CT signs perfectly identified malignant masses, whereas the detection of no more than 4 CT signs did not accurately discriminate between the natures of masses. Mean SUVmax, SUVmean, MTV, and TLG values were significantly higher in malignant masses compared to those in benign masses. The diagnostic accuracy of 18F-FDG PET/CT parameters (SUV, MTV, and TLG) was excellent in detecting malignant masses. Among patients with 3 or 4 pathological CT signs, SUVmax > 3.4 significantly increased the identification of malignancies. CONCLUSIONS: CTPA is a useful imaging modality for diagnosing PA masses, especially when at least 5 abnormal CT signs are identified. Similarly, 18F-FDG PET/CT accurately identified malignant masses and provided additional valuable information on diagnostic uncertainties after CTPA.

Detection of a major QTL and development of KASP markers for seed weight by combining QTL-seq, QTL-mapping and RNA-seq in peanut.

KEY MESSAGE: Combining QTL-seq, QTL-mapping and RNA-seq identified a major QTL and candidate genes, which contributed to the development of KASP markers and understanding of molecular mechanisms associated with seed weight in peanut. Seed weight, as an important component of seed yield, is a significant target of peanut breeding. However, relatively little is known about the quantitative trait loci (QTLs) and candidate genes associated with seed weight in peanut. In this study, three major QTLs on chromosomes A05, B02, and B06 were determined by applying the QTL-seq approach in a recombinant inbred line (RIL) population. Based on conventional QTL-mapping, these three QTL regions were successfully narrowed down through newly developed single nucleotide polymorphism (SNP) and simple sequence repeat markers. Among these three QTL regions, qSWB06.3 exhibited stable expression, contributing mainly to phenotypic variance across environments. Furthermore, differentially expressed genes (DEGs) were identified at the three seed developmental stages between the two parents of the RIL population. It was found that the DEGs were widely distributed in the ubiquitin-proteasome pathway, the serine/threonine-protein pathway, signal transduction of hormones and transcription factors. Notably, DEGs at the early stage were mostly involved in regulating cell division, whereas DEGs at the middle and late stages were primarily involved in cell expansion during seed development. The expression patterns of candidate genes related to seed weight in qSWB06.3 were investigated using quantitative real-time PCR. In addition, the allelic diversity of qSWB06.3 was investigated in peanut germplasm accessions. The marker Ah011475 has higher efficiency for discriminating accessions with different seed weights, and it would be useful as a diagnostic marker in marker-assisted breeding. This study provided insights into the genetic and molecular mechanisms of seed weight in peanut.

KOH activated nitrogen and oxygen co-doped tubular carbon clusters as anode material for boosted potassium-ion storage capability.

Carbon nanomaterials have become a promising anode material for potassium-ion batteries (KIBs) due to their abundant resources, low cost, and excellent conductivity. However, among carbon materials, the sluggish reaction kinetics and inferior cycle life severely restrict their commercial development as KIBs anodes. It is still a huge challenge to develop carbon materials with various structural advantages and ideal electrochemical properties. Therefore, it is imperative to find a carbon material with heteroatom doping and suitable nanostructure to achieve excellent electrochemical performance. Benefiting from a Na2SO4template-assisted method and KOH activation process, the KOH activated nitrogen and oxygen co-doped tubular carbon (KNOCTC) material with a porous structure exhibits an impressive reversible capacity of 343 mAh g-1at 50 mA g-1and an improved cyclability of 137 mAh g-1at 2 A g-1after 3000 cycles with almost no capacity decay. The kinetic analysis indicates that the storage mechanism in KNOCTC is attributed to the pseudocapacitive process during cycling. Furthermore, the new synthesis route of KNOCTC provides a new opportunity to explore carbon-based potassium storage anode materials with high capacity and cycling performance.

Elucidating the interaction of rhizosphere bacteria and environmental factors in influencing active ingredient content of Lycium barbarum fruit in China.

AIMS: This study aimed to compare the differences in the bacterial community structure of Lycium barbarum rhizosphere and elucidate the contribution of rhizosphere bacteria to the active ingredients of L. barbarum fruit. METHODS AND RESULTS: This study investigated the soil and meteorological characteristics of L. barbarum rhizosphere during three growth stages across three production regions of China. High-throughput sequencing showed significant differences in the bacterial community diversity of L. barbarum rhizosphere across the three production regions, and norank_o_Gaiellales, norank_f_Anaerolineaceae and norank_f_AKYG1722 were the highest in Ningxia. In addition, regression and path analysis revealed that pH, norank_o_Gaiellales and norank_f_AKYG1722 significantly promoted the accumulation of total sugar and flavonoids in L. barbarum fruit directly or indirectly. Soil organic matter (SOM), norank_f_Anaerolineaceae and humidity significantly promoted the accumulation of betaine. The average temperature during the growth stages, norank_f_AKYG1722, and norank_o_Gaiellales promoted the accumulation of polysaccharides. CONCLUSIONS: The interaction between rhizosphere bacteria and environmental factors promoted the accumulation of active ingredients in L. barbarum fruits. SIGNIFICANCE AND IMPACT OF THE STUDY: Our results provided insights to improve the quality of L. barbarum fruit.