Exploring the impact of high-energy diets on cattle: Insights into subacute rumen acidosis, insulin resistance, and hoof health.

Cattle lameness remains a significant concern, causing economic losses and compromising animal welfare. Claw horn lesions have been identified as a major cause of lameness in dairy cows, but their correlation with high-energy diets and ruminal acidosis remains unclear. Hence, the primary objective of this study was to assess the effects of a high-starch diet and a conventional diet on the rumen environment, acute-phase proteins, and metabolic alterations, with a particular focus on insulin resistance and the consequent implications for the histology of the hooves in Holstein steers. A total of 16 animals were divided into the high-starch (HS; 37% starch) and conventional (CON; 16.8% starch) groups. Glucose tolerance tests (GTT), blood analyses, rumen fluid analyses, and histological evaluations of the hoof tissue were conducted over a 102-d experimental period. The HS group showed a lower ruminal pH than the CON group, and with values indicating SARA. The plasma glucose and IGF-1 concentrations were higher in the HS group, suggesting an anabolic state. Both groups exhibited an increase in the insulin area under the curve (AUC) after the GTT on d 102. Histological analysis of the hooves showed a reduction in the length and width of the epidermal lamella in both groups. We found a significant negative correlation between the insulin AUC and the length and width of the epidermal lamella. Because both groups were similarly affected, the hypothesis that histological alterations were caused by the experimental diets still needs confirmation. Additionally, the development of SARA was not essential for the observed histological changes in the hoof. Further studies are warranted to thoroughly investigate the role of insulin and IGF-1 imbalances in claw health.

The role of autophagy in prostate cancer and prostatic diseases: a new therapeutic strategy.

BACKGROUND: Autophagy is a well-conserved catabolic process that plays a key role in cell homeostasis. In the prostate, defective autophagy has been implicated in the genesis and progression of several pathological conditions. AIM: The present review explored the autophagy pathway in prostate-related dysfunctions, focusing on prostate cancer (PCa), benign prostatic hyperplasia (BPH) and prostatitis. RESULTS: Impaired autophagy activity has been shown in animal models of BPH and prostatitis. Moreover, autophagy activation by specific and non-specific drugs improved both conditions in pre-clinical studies. Conversely, the efficacy of autophagy inducers in PCa remains controversial, depending on intrinsic PCa characteristics and stage of progression. Intriguingly, autophagy inhibitors have shown beneficial effects in PCa suppression or even to overcome chemotherapy resistance. However, there are still open questions regarding the upstream mechanisms by which autophagy is deregulated in the prostate and the exact role of autophagy in PCa. The lack of specificity and increased toxicity associated with the currently autophagy inhibitors limits its use clinically, reflecting in reduced number of clinical data. CONCLUSION: New therapeutic strategies to treat prostatic diseases involving new autophagy modulators, combination therapy and new drug formulations should be explored. Understanding the autophagy signaling in each prostatic disease is crucial to determine the best pharmacological approach.

Corrosion behavior of multi-layer friction surfaced structure from dissimilar aluminum alloys.

Friction surfacing (FS) is a solid-state coating technology for metallic materials, where the deposition of a consumable material on a substrate is enabled via friction and plastic deformation. The deposited layer material commonly presents a significantly refined microstructure, where corrosion could be an issue due to this grain refinement within the layer deposited, possibly creating micro galvanic pairs. The present work investigates the corrosion behavior of the FS deposited material as well as stud base material and substrate using cyclic polarization tests and open circuit potential (OCP) monitoring. Comparing the FS deposited material and the respective consumable stud base material (both AA5083), the grain size is correlated with the results from the corrosion tests, where the deposited material shows more equiaxed and refined grains in comparison to the stud base material. The cyclic potentiostatic polarization tests showed that the stud base material is more resistant to pitting nucleation presenting smaller pits and a lower amount of pits compared to deposited material and substrate. As a complement to OCP test, the stud base material is also more stable on a chloride solution compared to the substrate and the deposited material.

Friction taper stitch welding of a duplex stainless steel.

Friction taper stitch welding (FTSW) is a novel technique that uses multiple inserts to conceal surface crack in a given substrate. The inserts are rotated and forced to fill the crack as plasticized material, and forge with the substrate in solid-state. The process is well suited for alloys such as duplex stainless steel, which suffers degradation of properties during fusion welding. A detailed experimental and theoretical investigation is presented here on FTSW of a duplex stainless steel (DSS). The experimental results show the presence of a ferrite-rich phase along the interface. The results computed by the numerical process model reveal a direct influence of thermal cycle in the amount of ferrite along the joint interface. The welded joint shows near homogeneous structure and properties similar to those of the substrate.

Mitigating the susceptibility to intergranular corrosion of alloy 625 by friction-stir welding.

In this work, friction-stir welding (FSW) was employed to alloy 625 grade I (soft annealed) sheets. Therefore, solid-state based welding was undertaken with a tool rotational speed of 200 rpm and a welding speed of 1 mm/s. Microstructural features were analyzed by light optical and scanning electron microscopy (LOM and SEM). Moreover, microhardness measurements were performed. The susceptibility to intergranular corrosion was verified by the double-loop electrochemical potentiokinetic reactivation (DL-EPR) test. Complementary, intergranular corrosion was also evaluated by the ASTM G28 Method A. FSW promoted grain refinement, increased microhardness, and reduction in the degree of sensitization. Finally, the mean corrosion rate observed in the ASTM G28 Method A test was 0.4406 mm/year, which suggests a good weld quality.

Hospitalization and mortality rates of malignant prostatic neoplasms in Brazil: A cross-sectional study from 2008 to 2018

Abstract Prostate cancer (PCa) is a highly prevalent condition among men worldwide, resulting in reduced quality of life and increased costs to health systems due to hospitalization and death. This study aimed to explore and understand the evolution of PCa in Brazil from 2008 to 2018. Data were obtained from the National Health System Department of Informatics (DATASUS) using code C61 for malignant prostatic neoplasms. We presented the hospitalization and mortality rates in a temporal-, regional- and age-dependent manner. From 2008 to 2018, a year-dependent increase in hospital admissions due to PCa was reported in Brazil, in which the Southeast region showed the highest prevalence. Men aged ≥80 and those 70-79 years old had similar hospitalization rates, followed by men aged 60-69, 50-59, 40-49 and 30-39 years old. Similarly, an increase in deaths due to PCa was reported during this period, with the highest rates seen in the Southeast. Men aged ≥80 years had higher mortality rates, followed by those aged 70-79, 60-69, 50-59, 40-49 and 30-39 years old. The results obtained indicate an age- and region-dependent increase in PCa morbidity and mortality in Brazil overtime and may contribute to the ongoing discussion on the role and future perspective of the health care system in Brazil

Por onde anda a histeria? / Where is the hysteria?

O termo histeria foi suprimido das classificações diagnósticas vigentes. Este artigo cita e descreve os diagnósticos que estão agora abrigados no guarda-chuva da histeria, além de discutir algumas implicações sobre essa mudança.

The term hysteria was suppressed from the current diagnostic classifications. This article cites and describes the diagnoses that are now housed under the umbrella of hysteria, in addition to discussing some implications on this change.

Influence of glucose concentration on the membrane stability of human erythrocytes.

The action of glucose as an osmolyte in relation to blood cells is not well-characterized in the literature. This study aimed to study the influence of glucose concentration on the stability of red blood cells. The stability of erythrocytes was evaluated by the half-transition point obtained from the curves of lysis induced by glucose in the absence of salt or by increase in medium hypotonicity in the absence and the presence of different concentrations of glucose. In the presence of 0.9 g/dl NaCl, there was no hemolysis with increasing concentration of glucose from 0 to 10 g/dl. In the absence of NaCl, the dependence of hemolysis with the 0-10 g/dl glucose was described by a decreasing sigmoid, with fully lysed and fully protected cells being encountered in the presence of 0-2 and 4-10 g/dl glucose, respectively. The possible origin of such stabilization effect is discussed with base of what is known about osmostabilization of biological complexes and about the influence of glucose on the rheological properties of erythrocytes.

Desempenho ponderal de bovinos Nelore suplementados com fontes alternativas de fósforo / Weight gain of Nelore cattle supplemented with different phosphorus sources

O desempenho produtivo e a possível interferência do flúor sobre a saúde dos animais foram investigados em bovinos Nelore suplementados, por 866 dias, com distintas fontes alternativas de fósforo com diferentes relações fósforo:fluor (P:F). Os tratamentos experimentais foram: Controle negativo (CONTNEG, sem qualquer suplementação com P), fosfato bicálcico (FB 120:1, FB 30:1 e FB 10:1), fosfato monobicálcico (FMBC 60:1), superfosfato triplo (SFT 30:1) e fosfato de rocha de Cajati (FR 10:1). Foram utilizados 49 novilhos, desmamados aos oito meses de idade, castrados e com 230 kg de peso médio, distribuídos em sete piquetes com água e mistura mineral formulada sem P. A dieta padrão foi feita com bagaço de cana (0,03% de P) como volumoso e um concentrado contendo 0,239 % de P oferecido na base de 1% do peso dos animais para permitir um ganho de peso aproximado de 0,50 kg/dia. Até o dia 134, não houve diferença estatística entre os diversos lotes, inclusive para o tratamento CONTNEG, que não recebeu fósforo suplementar na dieta e ganhou 71,6 kg de peso ou 0,633 kg/dia. Após 866 dias de confinamento (2,37 anos), os animais suplementados com o fosfato bicálcico padrão (120:1) ganharam menos peso que os suplementados com as fontes FMCB 60:1, FB 30:1 e SFT 30:1. Até um ano de suplementação fosfórica com fosfato bicálcico padrão (120:1) artificialmente fluoretado com NaF ou com o fosfato de rocha não se detectou danos à saúde ou ao ganho de peso dos animais. As análises de fósforo nos ossos mostraram diferença estatística apenas entre o tratamento CONTNEG e os que tinham fosfato bicálcico. As concentrações de flúor nos ossos se mostraram intimamente associadas à quantidade de flúor disponível nas fontes utilizadas. Conforme a proporção P:F na dieta foi diminuindo, características relacionadas à fluorose dentária ficaram mais evidentes, sendo que os animais que receberam fontes com relação 10:1, apresentaram, ao final do experimento, dentes incisivos permanentes mal formados, quebradiços e com manchas esbranquiçadas.

Weight gain and possible interference of fluoride on animal health was investigated in Nellore cattle supplemented during 866 days with alternative sources of phosphorus with different phosphorus:fluor (P:F) ratios. The five treatments were: (1) Negative control (NC, without any supplemental P), (2) dicalcium phosphate (DCP 120:1, DCP 30:1 and DCP 10:1), (3) monodicalcium phosphate (MDCP 60:1), (4) triple superphosphate (TSF 30:1), and (5) cajati rock phosphate (RP 10:1). We used 49 oxen weaned with 8 months of age and an average weight of 230 kg, distributed into seven paddocks with water and mineral mixture formulated without P. A standard diet consisting of sugar cane bagasse (0.03% P) as roughage and a concentrate containing 0.239% P was provided on 1% of live weight to allow a weight gain of about 0.50 kg/day. Until day 134, there was no statistical difference between the various groups, including the treatment NC which received no supplemental phosphorus in the diet and gained weight of 71.6 kg or 0.633 kg/day. After 866 days of confinement (2.37 years), the oxen supplemented with dicalcium phosphate standard (120:1) gained less weight than those supplemented with sources MDCP 60:1, DCP 30:1 and TSF 30:1. Up to one year of supplementation with dicalcium phosphate artificially fluoridated with NaF or with rock phosphate did not result in damage to health or in weight gain of the animals. Analyses of phosphorus in bones showed statistical difference between treatments, and group NC that did not receive any supplemental P showed the lowest values. The concentration of fluoride in bones proved to be closely related to the amount of fluoride available in the sources used. As the ratio P:F in the diet decreased, characteristic signs related to dental fluorosis became more evident, and the animals that received P supplies with 10:1 ratio showed at the end of the experiment permanent malformed incisor teeth, brittle and whitish stained.