"All in One" Strategy for Achieving Superprotonic Conductivity by Incorporating Strong Acids into a Robust Imidazole-Linked Covalent Organic Framework.

The fabrication of solid-state proton-conducting electrolytes possessing both high performance and long-life reusability is significant but challenging. An "all-in-one" composite, H3PO4@PyTFB-1-SO3H, including imidazole, sulfonic acid, and phosphoric acid, which are essential for proton conduction, was successfully prepared by chemical post-modification and physical loading in the rationally pre-synthesized imidazole-based nanoporous covalent organic framework (COF), PyTFB-1. The resultant H3PO4@PyTFB-1-SO3H exhibits superhigh proton conductivity with its value even highly up to 1.15 × 10-1 S cm-1 at 353 K and 98% relative humidity (RH), making it one of the highest COF-based composites reported so far under the same conditions. Experimental studies and theoretical calculations further confirmed that the imidazole and sulfonic acid groups have strong interactions with the H3PO4 molecules and the synergistic effect of these three groups dramatically improves the proton conductivity properties of H3PO4@PyTFB-1-SO3H. This work demonstrated that by aggregating multiple proton carriers into one composite, effective proton-conducting electrolyte can be feasibly achieved.

From Supramolecular Organic Cages to Porous Covalent Organic Frameworks for Enhancing Iodine Adsorption Capability by Fully Exposed Nitrogen-Rich Sites.

In order to overcome the limitations of supramolecular organic cages for their incomplete accessibility of active sites in the solid state and uneasy recyclability in liquid solution, herein a nitrogen-rich organic cage is rationally linked into framework systems and four isoreticular covalent organic frameworks (COFs), that is, Cage-TFB-COF, Cage-NTBA-COF, Cage-TFPB-COF, and Cage-TFPT-COF, are successfully synthesized. Structure determination reveals that they are all high-quality crystalline materials derived from the eclipsed packing of related isoreticular two-dimensional frameworks. Since the nitrogen-rich sites usually have a high affinity toward iodine species, iodine adsorption investigations are carried out and the results show that all of them display an enhancement in iodine adsorption capacities. Especially, Cage-NTBA-COF exhibits an iodine adsorption capacity of 304 wt%, 14-fold higher than the solid sample packed from the cage itself. The strong interactions between the nitrogen-rich sites and the adsorbed iodine species are revealed by spectral analyses. This work demonstrates that, utilizing the reticular chemistry strategy to extend the close-packed supramolecular organic cages into crystalline porous framework solids, their inherent properties can be greatly exploited for targeted applications.

Highly Enhancing CO2 Photoreduction by Metallization of an Imidazole-linked Robust Covalent Organic Framework.

Converting CO2 into value-added chemicals to solve the issues caused by carbon emission is promising but challenging. Herein, by embedding metal ions (Co2+ , Ni2+ , Cu2+ , and Zn2+ ) into an imidazole-linked robust photosensitive covalent organic framework (PyPor-COF), effective photocatalysts for CO2 conversion are rationally designed and constructed. Characterizations display that all of the metallized PyPor-COFs (M-PyPor-COFs) display remarkably high enhancement in their photochemical properties. Photocatalysis reactions reveal that the Co-metallized PyPor-COF (Co-PyPor-COF) achieves a CO production rate as high as up to 9645 µmol g-1 h-1 with a selectivity of 96.7% under light irradiation, which is more than 45 times higher than that of the metal-free PyPor-COF, while Ni-metallized PyPor-COF (Ni-PyPor-COF) can further tandem catalyze the generated CO to CH4 with a production rate of 463.2 µmol g-1 h-1 . Experimental analyses and theory calculations reveal that their remarkable performance enhancement on CO2 photoreduction should be attributed to the incorporated metal sites in the COF skeleton, which promotes the adsorption and activation of CO2 and the desorption of generated CO and even reduces the reaction energy barrier for the formation of different intermediates. This work demonstrates that by metallizing photoactive COFs, effective photocatalysts for CO2 conversion can be achieved.

Highly Effective Proton-Conductive Matrix-Mixed Membrane Based on a -SO3H-Functionalized Polyphosphazene.

A polyphosphazene with in-built -SO3H moieties (PP-PhSO3H) was facilely synthesized by the polymeric combination of hexachlorocyclotriphosphazene (HCCP) and sulfonate p-phenylenediamine. Characterization reveals that it is a highly stable amorphous polymer. Proton conductivity investigations showed that the synthesized PP-PhSO3H exhibits a proton conductivity of up to 6.64 × 10-2 S cm-1 at 353 K and 98% relative humidity (RH). This value is almost 2 orders of magnitude higher than the corresponding value for its -SO3H-free analogue, PP-Ph, which is 1.72 × 10-4 S cm-1 when measured under the same condition. Consequently, matrix-mixed membranes (labeled PP-PhSO3H-PAN) were further prepared by mixing PP-PhSO3H with polyacrylonitrile (PAN) in different ratios to test its potential application in the proton-exchange membrane (PEM) fuel cell. The analysis results indicate that when the weight ratio of PP-PhSO3H/PAN is 3:1 [named PP-PhSO3H-PAN (3:1)], its proton conductivity can reach up to 5.05 × 10-2 S cm-1 at 353 K and 98% RH, which is even comparable with those of proton-conductive electrolytes currently used in PEM fuel cells. Furthermore, the continuous test demonstrates that the PP-PhSO3H-PAN (3:1) has long-life reusability. This research reveals that by using phosphazene and sulfonated multiple-amine modules as precursors, organic polymers with excellent proton conductivity for the assembly of matrix-mixed membranes in PEM fuel cells can be easily synthesized by a simple polymeric process.

Facile construction of a highly proton-conductive matrix-mixed membrane based on a -SO3H functionalized polyamide.

Developing a facile strategy to construct low-cost and efficient proton-conductive electrolytes is pivotal in the practical application of proton exchange membrane (PEM) fuel cells. Herein, a polyamide with in-built -SO3H moieties, PA(PhSO3H)2, was synthesized via a simple one-pot polymeric acylation process. Investigations via electrochemical impedance spectroscopy (EIS) measurements revealed that the fabricated PA(PhSO3H)2 displays a proton conductivity of up to 5.54 × 10-2 S cm-1 at 353 K under 98% relative humidity (RH), which is more than 2 orders of magnitude higher than that of its -SO3H-free analogue PA(Ph)2 (2.38 × 10-4 S cm-1) under the same conditions. Therefore, after mixing with polyacrylonitrile (PAN) at different ratios, PA(PhSO3H)2-based matrix-mixed membranes were subsequently made and the analysis results revealed that the proton conductivity can reach up to 5.82 × 10-2 S cm-1 at 353 K and 98% RH when the weight ratio of PA(PhSO3H)2 : PAN is in 3 : 1 (labeled as PA(PhSO3H)2-PAN(3 : 1)), the value of which is comparable even to those of commercially available electrolytes that are used in PEM fuel cells. In addition, continuous testing shows that PA(PhSO3H)2-PAN(3 : 1) possesses long-life reusability. This work demonstrates that, utilizing the simple reaction of polymeric acylation with a sulfonated module as a precursor, highly effective proton-conductive membranes for PEM fuel cells can be achieved in a facile manner.

Highly Effective Proton-Conduction Matrix-Mixed Membrane Derived from an -SO3H Functionalized Polyamide.

Developing a low-cost and effective proton-conductive electrolyte to meet the requirements of the large-scale manufacturing of proton exchange membrane (PEM) fuel cells is of great significance in progressing towards the upcoming "hydrogen economy" society. Herein, utilizing the one-pot acylation polymeric combination of acyl chloride and amine precursors, a polyamide with in-built -SO3H moieties (PA-PhSO3H) was facilely synthesized. Characterization shows that it possesses a porous feature and a high stability at the practical operating conditions of PEM fuel cells. Investigations of electrochemical impedance spectroscopy (EIS) measurements revealed that the fabricated PA-PhSO3H displays a proton conductivity of up to 8.85 × 10-2 S·cm-1 at 353 K under 98% relative humidity (RH), which is more than two orders of magnitude higher than that of its -SO3H-free analogue, PA-Ph (6.30 × 10-4 S·cm-1), under the same conditions. Therefore, matrix-mixed membranes were fabricated by mixing with polyacrylonitrile (PAN) in different ratios, and the EIS analyses revealed that its proton conductivity can reach up to 4.90 × 10-2 S·cm-1 at 353 K and a 98% relative humidity (RH) when the weight ratio of PA-PhSO3H:PAN is 3:1 (labeled as PA-PhSO3H-PAN (3:1)), the value of which is even comparable with those of commercial-available electrolytes being used in PEM fuel cells. Additionally, continuous tests showed that PA-PhSO3H-PAN (3:1) possesses a long-life reusability. This work demonstrates, using the simple acylation reaction with the sulfonated module as precursor, that low-cost and highly effective proton-conductive electrolytes for PEM fuel cells can be facilely achieved.

High Enhancement in Proton Conductivity by Incorporating Sulfonic Acids into a Zirconium-Based Metal-Organic Framework via "Click" Reaction.

Taking a robust zirconium-based metal-organic framework, UiO-66, as a prototype, functional postmodification via the versatile Cu(I)-catalyzed azide-alkyne "click" reaction was carried out, and sulfonic acid groups were successfully grafted into its skeleton. Characterizations revealed that the MOF network was still well maintained after being treated by "clicked" modification. Investigations by electrochemical impedance spectroscopy measurements revealed that its proton conductivity increases exponentially up to 8.8 × 10-3 S cm-1 at 80 °C and 98% RH, while those of the UiO-66 and UiO-66-NH2 are only 6.3 × 10-6 and 3.5 × 10-6 S cm-1, respectively, at the same condition. Additionally, the continuous test shows it possesses long-life reusability. Such a remarkable enhancement on the proton conductivities and high performance in long-life reusability of the resultant MOF demonstrated that the "click" reaction is a facile reaction in postmodification of robust porous materials toward targeted applications, with which highly promising candidates of proton-conductive electrolytes for applying in proton-exchange-membrane (PEM) fuel cell can be achieved.

Water-Binding-Mediated Gelation/Crystallization and Thermosensitive Superchirality.

Determination of molecular structural parameters of hydrophobic cholesterol-naphthalimide conjugates for water binding capabilities as well as their moisture-sensitive supramolecular self-assembly were revealed. Water binding was a key factor in leading trace water-induced crystallization against gelation in apolar solvent. Ordered water molecules entrapped in self-assembly arrays revealed by crystal structures behave as hydrogen-bonding linkers to facilitate three-dimensional growth into crystals rather than one-dimensional gel nanofibers. Water binding was also reflected on the supramolecular chirality inversion of vesicle self-assembly in aqueous media via heating-induced dehydration. Structural parameters that favor water binding were evaluated in detail, which could help rationally design organic building units for advancing soft materials, crystal engineering, and chiral recognition.

A Triazole-Containing Metal-Organic Framework as a Highly Effective and Substrate Size-Dependent Catalyst for CO2 Conversion.

A highly porous metal-organic framework (MOF) incorporating both exposed metal sites and nitrogen-rich triazole groups was successfully constructed via solvothermal assembly of a clicked octcarboxylate ligand and Cu(II) ions, which presents a high affinity toward CO2 molecules clearly verified by gas adsorption and Raman spectral detection. The constructed MOF featuring CO2-adsorbing property and exposed Lewis-acid metal sites could serve as an excellent catalyst for CO2-based chemical fixation. Catalytic activity of the MOF was confirmed by remarkably high efficiency on CO2 cycloaddition with small epoxides. When extending the substrates to larger ones, its activity showed a sharp decrease. These observations reveal that MOF-catalyzed CO2 cycloaddition of small substrates was carried out within the framework, while large ones cannot easily enter into the porous framework for catalytic reactions. Thus, the synthesized MOF exhibits high catalytic selectivity to different substrates on account of the confinement of the pore diameter. The high efficiency and size-dependent selectivity toward small epoxides on catalytic CO2 cycloaddition make this MOF a promising heterogeneous catalyst for carbon fixation.

Bimetallic Metal-Organic Frameworks: Probing the Lewis Acid Site for CO2 Conversion.

A highly porous metal-organic framework (MOF) incorporating two kinds of second building units (SBUs), i.e., dimeric paddlewheel (Zn2 (COO)4 ) and tetrameric (Zn4 (O)(CO2 )6 ), is successfully assembled by the reaction of a tricarboxylate ligand with Zn(II) ion. Subsequently, single-crystal-to-single-crystal metal cation exchange using the constructed MOF is investigated, and the results show that Cu(II) and Co(II) ions can selectively be introduced into the MOF without compromising the crystallinity of the pristine framework. This metal cation-exchangeable MOF provides a useful platform for studying the metal effect on both gas adsorption and catalytic activity of the resulted MOFs. While the gas adsorption experiments reveal that Cu(II) and Co(II) exchanged samples exhibit comparable CO2 adsorption capability to the pristine Zn(II) -based MOF under the same conditions, catalytic investigations for the cycloaddition reaction of CO2 with epoxides into related carbonates demonstrate that Zn(II) -based MOF affords the highest catalytic activity as compared with Cu(II) and Co(II) exchanged ones. Molecular dynamic simulations are carried out to further confirm the catalytic performance of these constructed MOFs on chemical fixation of CO2 to carbonates. This research sheds light on how metal exchange can influence intrinsic properties of MOFs.

Ruthenium-Catalyzed Oxidative Homocoupling of Arylboronic Acids in Water: Ligand Tuned Reactivity and Mechanistic Study.

Molecular catalysts based on water-soluble arene-Ru(II) complexes ([Ru]-1-[Ru]-5) containing aniline (L1), 2-methylaniline (L2), 2,6-dimethylaniline (L3), 4-methylaniline (L4), and 4-chloroaniline (L5) were designed for the homocoupling of arylboronic acids in water. These complexes were fully characterized by (1)H, (13)C NMR, mass spectrometry, and elemental analyses. Structural geometry for two of the representative arene-Ru(II) complexes [Ru]-3 and [Ru]-4 was established by single-crystal X-ray diffraction studies. Our studies showed that the selectivity toward biaryls products is influenced by the position and the electronic behavior of various substituents of aniline ligand coordinated to ruthenium. Extensive investigations using (1)H NMR, (19)F NMR, and mass spectral studies provided insights into the mechanistic pathway of homocoupling of arylboronic acids, where the identification of important organometallic intermediates, such as σ-aryl/di(σ-aryl) coordinated arene-Ru(II) species, suggested that the reaction proceeds through the formation of crucial di(σ-aryl)-Ru intermediates by the interaction of arylboronic acid with Ru-catalyst to yield biaryl products.

Troponate/Aminotroponate Ruthenium-Arene Complexes: Synthesis, Structure, and Ligand-Tuned Mechanistic Pathway for Direct C-H Bond Arylation with Aryl Chlorides in Water.

A series of water-soluble troponate/aminotroponate ruthenium(II)-arene complexes were synthesized, where O,O and N,O chelating troponate/aminotroponate ligands stabilized the piano-stool mononuclear ruthenium-arene complexes. Structural identities for two of the representating complexes were also established by single-crystal X-ray diffraction studies. These newly synthesized troponate/aminotroponate ruthenium-arene complexes enable efficient C-H bond arylation of arylpyridine in water. The unique structure-activity relationship in these complexes is the key to achieve efficient direct C-H bond arylation of arylpyridine. Moreover, the steric bulkiness of the carboxylate additives systematically directs the selectivity toward mono- versus diarylation of arylpyridines. Detailed mechanistic studies were performed using mass-spectral studies including identification of several key cyclometalated intermediates. These studies provided strong support for an initial cycloruthenation driven by carbonate-assisted deprotonation of 2-phenylpyridine, where the relative strength of η(6)-arene and the troponate/aminotroponate ligand drives the formation of cyclometalated 2-phenylpyridine Ru-arene species, [(η(6)-arene)Ru(κ(2)-C,N-phenylpyridine) (OH2)](+) by elimination of troponate/aminotroponate ligands and retaining η(6)-arene, while cyclometalated 2-phenylpyridine Ru-troponate/aminotroponate species [(κ (2)-troponate/aminotroponate)Ru(κ(2)-C,N-phenylpyridine)(OH2)2] was generated by decoordination of η(6)-arene ring during initial C-H bond activation of 2-phenylpyridine. Along with the experimental mass-spectral evidence, density functional theory calculation also supports the formation of such species for these complexes. Subsequently, these cycloruthenated products activate aryl chloride by facile oxidative addition to generate C-H arylated products.

An iGlu receptor antagonist and its simultaneous use with an anticancer drug for cancer therapy.

Glutamate receptor antagonists have been known to play a crucial role in the treatment of many neuronal diseases. Recently, these antagonists have also shown therapeutic effects in the treatment of cancer. In this study, an ionotropic glutamate (iGlu) receptor antagonist, 4-hydroxyphenylacetyl spermine (L1), was used concurrently with a common anticancer drug, doxorubicin (Dox), for simultaneous cancer therapy. Mesoporous silica nanoparticles (MSNPs) were employed as the delivery vehicle for both L1 and Dox by conjugating the iGlu receptor antagonist on the surface and encapsulating Dox within the mesopores. Dox was then trapped within the mesopores by functionalizing a redox-cleavable capping group on the MSNP surface, and it could be released upon exposure to the reductive glutathione. In vitro studies on B16F10 and NIH3T3 cell lines revealed that the iGlu receptor antagonist L1 exhibited therapeutic as well as targeting effects. In addition, the simultaneous use of therapeutic L1 and Dox proved to be synergistic in the treatment of cancer. The present work demonstrated the feasibility of employing a delivery system to deliver both neuroprotective drug and anticancer drug for efficient anticancer treatment.

Clicked Isoreticular Metal-Organic Frameworks and Their High Performance in the Selective Capture and Separation of Large Organic Molecules.

Three highly porous metal-organic frameworks (MOFs) with a uniform rht-type topological network but hierarchical pores were successfully constructed by the assembly of triazole-containing dendritic hexacarboxylate ligands with Zn(II) ions. These transparent MOF crystals present gradually increasing pore sizes upon extension of the length of the organic backbone, as clearly identified by structural analysis and gas-adsorption experiments. The inherent accessibility of the pores to large molecules endows these materials with unique properties for the uptake of large guest molecules. The visible selective adsorption of dye molecules makes these MOFs highly promising porous materials for pore-size-dependent large-molecule capture and separation.

Drug encapsulation and release by mesoporous silica nanoparticles: the effect of surface functional groups.

Mesoporous silica nanoparticles (MSNPs) have been widely used as drug carriers for stimuli-responsive drug delivery. Herein, a catalysis screening technique was adopted for analyzing the effects of chain length, terminal group, and density of disulfide-appended functional ligands on the surface of MSNPs on drug-loading capacity and glutathione-triggered drug-release kinetics. The ligand with an intermediate length (5 carbon atoms) and a bulky terminal group (cyclohexyl) that complexes with theß-cyclodextrin ring showed the highest drug loading capacity as well as good release kinetics. In addition, decreasing the surface coverage of the functional ligands led to an enhancement in drug release. In vitro drug-delivery experiments on a melanoma cell line (B16-F10) by using the functionalized MSNPs further supported the conclusion. The results obtained may serve as a general guide for developing more effective MSNP systems for drug delivery.

[4 + 2] cycloaddition reaction to approach diazatwistpentacenes: synthesis, structures, physical properties, and self-assembly.

Three novel diazatwistpentacenes (1,4,6,13-tetraphenyl-7:8,11:12-bisbenzo-2,3-diazatwistpentacene (1, IUPAC name: 9,11,14,16-tetraphenyl-1,6-dihydrobenzo[8,9]triphenyleno[2,3-g]phthalazine); 1,4-di(pyridin-2-yl)-6,13-diphenyl-7:8,11:12-bisbenzo-2,3-diazatwistpentacene (2, IUPAC name: 9,16-diphenyl-11,14-di(pyridin-2-yl)-1,6-dihydrobenzo[8,9]triphenyleno[2,3-g]phthalazine); and 1,4-di(thien-2-yl)-6,13-diphenyl-7:8,11:12-bisbenzo-2,3-diazatwistpentacene (3, IUPAC name: 9,16-diphenyl-11,14-di(thien-2-yl)-1,6-dihydrobenzo[8,9]triphenyleno[2,3-g]phthalazine)) have been successfully synthesized through [4 + 2] cycloaddition reaction involving in situ arynes as dienophiles and substituted 1,2,4,5-tetrazines as dienes. Their structures have been determined by single-crystal X-ray diffraction, confirming that all compounds have twisted configurations with torsion angles between the pyrene unit and the 2,3-diazaanthrance part as high as 21.52° (for 1), 24.74° (for 2), and 21.14° (for 3). The optical bandgaps for all compounds corroborate the values derived from CV. The calculation done by DFT shows that the HOMO-LUMO bandgaps are in good agreement with experimental data. Interestingly, the substituted groups (phenyl, pyridyl, thienyl) in the 1,4-positions did affect their self-assembly and the optical properties of as-resulted nanostructures. Under the same conditions, compounds 1-3 could self-assemble into different morphologies such as microrods (for 1), nanoprisms (for 2), and nanobelts (for 3). Moreover, the UV-vis absorption and emission spectra of as-prepared nanostructures were largely red-shifted, indicating J-type aggregation for all materials. Surprisingly, both 1 and 2 showed aggregation-induced emission (AIE) effect, while compound 3 showed aggregation-caused quenching (ACQ) effect. Our method to approach novel twisted azaacenes through [4 + 2] reaction could offer a new tool to develop unusual twisted conjugated materials for future optoelectronic applications.

Room-temperature chemoselective reduction of nitro groups using non-noble metal nanocatalysts in water.

Purely aqueous-phase chemoselective reduction of a wide range of aromatic and aliphatic nitro substrates has been performed in the presence of inexpensive Ni- and Co-based nanoparticle catalysts using hydrazine hydrate as a reducing agent at room temperature. Along with the observed high conversions and selectivities, the studied nanoparticle catalysts also exhibit a high tolerance to other highly reducible groups present in the nitro substrates. The development of these potential chemoselective reduction catalysts also provides a facile route for the synthesis of other industrially important fine chemicals or biologically important compounds, where other highly reducible groups are present in close proximity to the targeted nitro groups.

Surfactant-thermal syntheses, structures, and magnetic properties of Mn-Ge-sulfides/selenides.

Although either surfactants or amines have been investigated to direct the crystal growth of metal chalcogenides, the synergic effect of organic amines and surfactants to control the crystal growth has not been explored. In this report, several organic bases (hydrazine monohydrate, ethylenediamine (en), 1,2-propanediamine (1,2-dap), and 1,3-propanediamine (1,3-dap)) have been employed as structure-directing agents (SDAs) to prepare four novel chalcogenides (Mn3Ge2S7(NH3)4 (1), [Mn(en)2(H2O)][Mn(en)2MnGe3Se9] (2), (1,2-dapH)2{[Mn(1,2-dap)2]Ge2Se7} (3), and (1,3-dapH)(puH)MnGeSe4(4) (pu = propyleneurea) under surfactant media (PEG-400). These as-prepared new crystalline materials provide diverse metal coordination geometries, including MnS3N tetrahedra, MnGe2Se7 trimer, and MnGe3Se10 T2 cluster. Compounds 1-3 have been fully characterized by single-crystal X-ray diffraction (XRD), powder XRD, UV-vis spectra, Fourier transform infrared spectroscopy, and thermogravimetric analysis. Moreover, magnetic measurements for compound 1 showed an obvious antiferromagnetic transition at ~9 K. Our research not only enriches the structural chemistry of the transitional-metal/14/16 chalcogenides but also allows us to better understand the synergic effect of organic amines and surfactants on the crystallization of metal chalcogenides.

Surfactant media to grow new crystalline cobalt 1,3,5-benzenetricarboxylate metal-organic frameworks.

In this report, three new metal-organic frameworks (MOFs), [Co3(µ3-OH)(HBTC)(BTC)2Co(HBTC)]·(HTEA)3·H2O (NTU-Z30), [Co(BTC)]·HTEA·H2O (NTU-Z31), [Co3(BTC)4]·(HTEA)4 (NTU-Z32), where H3BTC = 1,3,5-benzenetricarboxylic acid, TEA = triethylamine, and NTU = Nanyang Technological University, have been successfully synthesized under surfactant media and have been carefully characterized by single-crystal X-ray diffraction, powder X-ray diffraction, thermogravimetric analysis, and IR spectromtry. NTU-Z30 has an unusual trimeric [Co3(µ3-OH)(COO)7] secondary building unit (SBU), which is different from the well-known trimeric [Co3O(COO)6] SBU. The topology studies indicate that NTU-Z30 and NTU-Z32 possess two new topologies, 3,3,6,7-c net and 2,8-c net, respectively, while NTU-Z31 has a known topology rtl type (3,6-c net). Magnetic analyses show that all three materials have weak antiferromagnetic behavior. Furthermore, NTU-Z30 has been selected as the heterogeneous catalyst for the aerobic epoxidation of alkene, and our results show that this material exhibits excellent catalytic activity as well as good stability. Our success in growing new crystalline cobalt 1,3,5-benzenetricarboxylate MOFs under surfactant media could pave a new road to preparing new diverse crystalline inorganic materials through a surfactant-thermal method.

Robust links in photoactive covalent organic frameworks enable effective photocatalytic reactions under harsh conditions.

Developing heterogeneous photocatalysts for the applications in harsh conditions is of high importance but challenging. Herein, by converting the imine linkages into quinoline groups of triphenylamine incorporated covalent organic frameworks (COFs), two photosensitive COFs, namely TFPA-TAPT-COF-Q and TFPA-TPB-COF-Q, are successfully constructed. The obtained quinoline-linked COFs display improved stability and photocatalytic activity, making them suitable photocatalysts for photocatalytic reactions under harsh conditions, as verified by the recyclable photocatalytic reactions of organic acid involving oxidative decarboxylation and organic base involving benzylamine coupling. Under strong oxidative condition, the quinoline-linked COFs show a high efficiency up to 11831.6 µmol·g-1·h-1 and a long-term recyclable usability for photocatalytic production of H2O2, while the pristine imine-linked COFs are less catalytically active and easily decomposed in these harsh conditions. The results demonstrate that enhancing the linkage robustness of photoactive COFs is a promising strategy to construct heterogeneous catalysts for photocatalytic reactions under harsh conditions.