Molecular oxidation-reduction junctions for artificial photosynthetic overall reaction.

Constructing redox semiconductor heterojunction photocatalysts is the most effective and important means to complete the artificial photosynthetic overall reaction (i.e., coupling CO2 photoreduction and water photo-oxidation reactions). However, multiphase hybridization essence and inhomogeneous junction distribution in these catalysts extremely limit the diverse design and regulation of the modes of photogenerated charge separation and transfer pathways, which are crucial factors to improve photocatalytic performance. Here, we develop molecular oxidation-reduction (OR) junctions assembled with oxidative cluster (PMo12, for water oxidation) and reductive cluster (Ni5, for CO2 reduction) in a direct (d-OR), alternant (a-OR), or symmetric (s-OR) manner, respectively, for artificial photosynthesis. Significantly, the transfer direction and path of photogenerated charges between traditional junctions are obviously reformed and enriched in these well-defined crystalline catalysts with monophase periodic distribution and thus improve the separation efficiency of the electrons and holes. In particular, the charge migration in s-OR shows a periodically and continuously opposite mode. It can inhibit the photogenerated charge recombination more effectively and enhance the photocatalytic performance largely when compared with the traditional heterojunction models. Structural analysis and density functional theory calculations disclose that, through adjusting the spatial arrangement of oxidation and reduction clusters, the energy level and population of the orbitals of these OR junctions can be regulated synchronously to further optimize photocatalytic performance. The establishment of molecular OR junctions is a pioneering important discovery for extremely improving the utilization efficiency of photogenerated charges in the artificial photosynthesis overall reaction.

Controlled Growth of Submillimeter-Scale Cr5Te8 Nanosheets and the Domain Wall Nucleation Governed Magnetization Reversal Process.

Two-dimensional (2D) ferromagnets have attracted widespread attention for promising applications in compact spintronic devices. However, the controlled synthesis of high-quality, large-sized, and ultrathin 2D magnets via facile, economical method remains challenging. Herein, we develop a hydrogen-tailored chemical vapor deposition approach to fabricating 2D Cr5Te8 ferromagnetic nanosheets. Interestingly, the time period of introducing hydrogen was found to be crucial for controlling the lateral size, and a Cr5Te8 single-crystalline nanosheet of lateral size up to ∼360 µm with single-unit-cell thickness has been obtained. These samples exhibit a leading role of domain wall nucleation in governing the magnetization reversal process, providing important references for optimizing the performances of associated devices. The nanosheets also show notable magnetotransport response, including nonmonotonous magnetic-field-dependent magnetoresistance and sizable anomalous Hall resistivity, demonstrating Cr5Te8 as a promising material for constructing high-performance magnetoelectronic devices. This study presents a breakthrough of large-sized CVD-grown 2D magnetic materials, which is indispensable for constructing 2D spintronic devices.

HK2 in microglia and macrophages contribute to the development of neuropathic pain.

Neuropathic pain is a complex pain condition accompanied by prominent neuroinflammation involving activation of both central and peripheral immune cells. Metabolic switch to glycolysis is an important feature of activated immune cells. Hexokinase 2 (HK2), a key glycolytic enzyme enriched in microglia, has recently been shown important in regulating microglial functions. Whether and how HK2 is involved in neuropathic pain-related neuroinflammation remains unknown. Using a HK2-tdTomato reporter line, we found that HK2 was prominently elevated in spinal microglia. Pharmacological inhibition of HK2 effectively alleviated nerve injury-induced acute mechanical pain. However, selective ablation of Hk2 in microglia reduced microgliosis in the spinal dorsal horn (SDH) with little analgesic effects. Further analyses showed that nerve injury also significantly induced HK2 expression in dorsal root ganglion (DRG) macrophages. Deletion of Hk2 in myeloid cells, including both DRG macrophages and spinal microglia, led to the alleviation of mechanical pain during the first week after injury, along with attenuated microgliosis in the ipsilateral SDH, macrophage proliferation in DRGs, and suppressed inflammatory responses in DRGs. These data suggest that HK2 plays an important role in regulating neuropathic pain-related immune cell responses at acute phase and that HK2 contributes to neuropathic pain onset primarily through peripheral monocytes and DRG macrophages rather than spinal microglia.

High-Curie-Temperature Elastic Polymer Ferroelectric by Carbene Cross-Linking.

With the emergence of wearable electronics, ferroelectrics are poised to serve as key components for numerous potential applications. Currently, intrinsically elastic ferroelectrics featuring a network structure through a precise "slight cross-linking" approach have been realized. The resulting elastic ferroelectrics demonstrate a combination of stable ferroelectric properties and remarkable resilience under various strains. However, challenges arose as the cross-linking temperature was too high when integrating ferroelectrics with other functional materials, and the Curie temperature of this elastic ferroelectric was comparatively low. Addressing these challenges, we strategically chose a poly(vinylidene fluoride)-based copolymer with high vinylidene fluoride content to obtain a high Curie temperature while synthesizing a cross-linker with carbene intermediate for high reactivity to reduce the cross-linking temperature. At a relatively low temperature, we successfully fabricated elastic ferroelectrics through carbene cross-linking. The resulting elastic polymer ferroelectrics exhibit a higher Curie temperature and show a stable ferroelectric response under strains up to 50%. These materials hold significant potential for integration into wearable electronics.

Size Dependent Phase Transformation of Liquid Gallium.

As the most popular liquid metal (LM), gallium (Ga) and its alloys are emerging as functional materials due to their unique combination of fluidic and metallic properties near room temperature. As an important branch of utilizing LMs, micro- and submicron-particles of Ga-based LM are widely employed in wearable electronics, catalysis, energy, and biomedicine. Meanwhile, the phase transition is crucial not only for the applications based on this reversible transformation process, but also for the solidification temperature at which fluid properties are lost. While Ga has several solid phases and exhibits unusual size-dependent phase behavior. This complex process makes the phase transition and undercooling of Ga uncontrollable, which considerably affects the application performance. In this work, extensive (nano-)calorimetry experiments are performed to investigate the polymorph selection mechanism during liquid Ga crystallization. It is surprisingly found that the crystallization temperature and crystallization pathway to either α -Ga or ß -Ga can be effectively engineered by thermal treatment and droplet size. The polymorph selection process is suggested to be highly relevant to the capability of forming covalent bonds in the equilibrium supercooled liquid. The observation of two different crystallization pathways depending on the annealing temperature may indicate that there exist two different liquid phases in Ga.

Integrated self-injection-locked narrow linewidth laser based on thin-film lithium niobate.

Narrow linewidth lasers have a wide range of applications in the fields of coherent optical communications, atomic clocks, and measurement. Lithium niobate material possesses excellent electro-optic and thermo-optic properties, making it an ideal photonic integration platform for a new generation. The light source is a crucial element in large-scale photonic integration. Therefore, it is essential to develop integrated narrow linewidth lasers based on low-loss LNOI. This study is based on the multimode race-track type add-drop microring resonator with multimode interferometric coupler (MMRA-MRR) of the DFB laser self-injection-locked, to achieve the narrowing of linewidth to the laser. The microring external cavity was used to narrow the linewidth of the laser to 2.5 kHz. The output power of the laser is 3.18 mW, and the side-mode suppression ratio is 60 dB. This paper presents an integrated low-noise, narrow-linewidth laser based on thin-film lithium niobate material for the communication band. This is significant for achieving all-optical device on-chip integration of lithium niobate material in the future. It has great potential for use in high-speed coherent optical communication.

Needle-free, Novel Fossa Ovalis Puncture with Percutaneous Transluminal Coronary Angioplasty Guidewire and Microcatheter in Pigs and a Human with an Extremely Tortuous Inferior Vena Cava.

Background: Transseptal puncture (TSP) performed with the Brockenbrough (BRK) needle is technically demanding and carries potential risks. The back end of the percutaneous transluminal coronary angioplasty (PTCA) guidewire is blunt and flexible, with good support, it can puncture the right ventricle-free wall, which is thicker than the atrial-septum. The guidewire is thin and easy to manipulate. This study evaluated the performance of TSP with a PTCA guidewire and microcatheter without a needle. Methods: The back end of a PTCA guidewire was advanced into the Tiger (TIG) catheter, within the SL1 sheath, to puncture the fossa ovalis (FO) under fluoroscopy. Subsequently, the microcatheter was inserted into the left atrium (LA) above the guidewire, and the front end of the guidewire was exchanged in the LA. After the puncture site was confirmed by contrast, the TIG catheter and a 0.032 inch wire were advanced into the LA. Finally, the sheath, with the dilator, was advanced over the wire into the LA. The safety margin of this method was tested in a pig model. Results: The puncture was successful in all seven pigs tested with a puncture-to-sheath entry time of < 20 minutes and no procedure-related complications. The method was successfully used to perform a difficult TSP in a patient with an extremely tortuous inferior vena cava, in whom puncture with a BRK needle had repeatedly failed. Conclusions: Cardiologists may use the PTCA guidewire and microcatheter as an alternative to the needle while performing TSP in special conditions, such as an extremely tortuous inferior vena cava.

Insight into the Mechanism of CO2 Chemical Fixation into Epoxides by Windmill-Shaped Polyoxovanadate and n-Bu4NX (X = Br, I).

Carbon dioxide (CO2) coupled with epoxide to generate cyclic carbonate stands out in carbon neutrality due to its 100% atom utilization. In this work, the mechanism of CO2 cycloaddition with propylene oxide (PO) cocatalyzed by windmill-shaped polyoxovanadate, [(C2N2H8)4(CH3O)4VIV4VV4O16]·4CH3OH (V8-1), and n-Bu4NX (X = Br, I) was thoroughly investigated using density functional theory (DFT) calculations. The ring-opening, CO2-insertion, and ring-closing steps of the process were extensively studied. Our work emphasizes the synergistic effect between V8-1 and n-Bu4NX (X = Br, I). Through the analysis of an independent gradient model based on Hirshfeld partition (IGMH), it was found that the attack of n-Bu4NX (X = Br, I) on Cß of PO triggers a distinct attractive interaction between the active fragment and the surrounding framework, serving as the primary driving force for the ring opening of PO. Furthermore, the effect of different cocatalysts was explored, with n-Bu4NI being more favorable than n-Bu4NBr. Moreover, the role of V8-1 in the CO2 cycloaddition reaction was clarified as not only acting as Lewis acid active sites but also serving as "electron sponges". This work is expected to advance the development of novel catalysts for organic carbonate formation.

Relativistic Coupled Cluster with Completely Renormalized and Perturbative Triples Corrections.

We have implemented noniterative triples corrections to the energy from coupled-cluster with single and double excitations (CCSD) within the 1-electron exact two-component (1eX2C) relativistic framework. The effectiveness of both the CCSD(T) and the completely renormalized (CR) CC(2,3) approaches are demonstrated by performing all-electron computations of the potential energy curves and spectroscopic constants of copper, silver, and gold dimers in their ground electronic states. Spin-orbit coupling effects captured via the 1eX2C framework are shown to be crucial for recovering the correct shape of the potential energy curves, and the correlation effects due to triples in these systems change the dissociation energies by about 0.1-0.2 eV or about 4-7%. We also demonstrate that relativistic effects and basis set size and contraction scheme are significantly more important in Au2 than in Ag2 or Cu2.

Anterior chamber and angle characteristics in Chinese children (6-11 years old) with different refractive status using swept-source optical coherence tomography.

BACKGROUND: The anatomic structure of the anterior chamber (AC) helps to explain differences in refractive status in school-aged children and is closely associated with primary angle closure (PAC). The aim of this study was to quantify and analyze the anterior chamber and angle (ACA) characteristics in Chinese children with different refractive status by swept-source optical coherence tomography (SS-OCT). METHODS: In a cross-sectional observational study, 383 children from two primary schools in Shandong Province, China, underwent a complete ophthalmic examination. First, the anterior chamber depth (ACD), anterior chamber width (ACW), angle-opening distance (AOD), and trabecular-iris space area (TISA) were evaluated automatically using a CASIA2 imaging device. AOD and TISA were measured at 500, 750 µm nasal (N1 and N2, respectively), and temporal (T1 and T2, respectively) to the scleral spur (SS). Cycloplegic refraction and axial length (AL) were then measured. According to spherical equivalent refraction (SER), the children were assigned to hyperopic (SER > 0.50D), emmetropic (-0.50D < SER ≤ 0.50D), and myopic groups (SER ≤ -0.50D). RESULTS: Out of the 383 children, 349 healthy children (160 girls) with a mean age of 8.23 ± 1.06 years (range: 6-11 years) were included. The mean SER and AL were - 0.10 ± 1.57D and 23.44 ± 0.95 mm, respectively. The mean ACD and ACW were 3.17 ± 0.24 mm and 11.69 ± 0.43 mm. The mean AOD were 0.72 ± 0.25, 0.63 ± 0.22 mm at N1, T1, and 0.98 ± 0.30, 0.84 ± 0.27 mm at N2, T2. The mean TISA were 0.24 ± 0.09, 0.22 ± 0.09mm2 at N1, T1, and 0.46 ± 0.16, 0.40 ± 0.14mm2 at N2, T2. The myopic group had the deepest AC and the widest angle. Compared with boys, girls had shorter AL, shallower ACD, narrower ACW, and ACA (all p < 0.05). By Pearson's correlation analysis, SER was negatively associated with ACD, AOD, and TISA. AL was positively associated with ACD, ACW, AOD, and TISA. In the multiple regression analysis, AOD and TISA were associated with deeper ACD, narrower ACW, and longer AL. CONCLUSION: In primary school students, the myopic eyes have deeper AC and wider angle. ACD, ACW, AOD, and TISA all increase with axial elongation. ACA is highly correlated with deeper ACD.

Flexible Sensors Based on Conductive Polymer Composites.

Elastic polymer-based conductive composites (EPCCs) are of great potential in the field of flexible sensors due to the advantages of designable functionality and thermal and chemical stability. As one of the popular choices for sensor electrodes and sensitive materials, considerable progress in EPCCs used in sensors has been made in recent years. In this review, we introduce the types and the conductive mechanisms of EPCCs. Furthermore, the recent advances in the application of EPCCs to sensors are also summarized. This review will provide guidance for the design and optimization of EPCCs and offer more possibilities for the development and application of flexible sensors.

Controlled Growth and Size-Dependent Magnetic Domain States of 2D γ-Fe2O3.

Nonlayered two-dimensional (2D) magnets have attracted special attention, as many of them possess magnetic order above room temperature and enhanced chemical stability compared to most existing vdW magnets, which offers remarkable opportunities for developing compact spintronic devices. However, the growth of these materials is quite challenging due to the inherent three-dimensionally bonded nature, which hampers the study of their magnetism. Here, we demonstrate the controllable growth of air-stable pure γ-Fe2O3 nanoflakes by a confined-vdW epitaxial approach. The lateral size of the nanoflakes could be adjusted from hundreds of nanometers to tens of micrometers by precisely controlling the annealing time. Interestingly, a lateral-size-dependent magnetic domain configuration was observed. As the sizes continuously increase, the magnetic domain evolves from single domain to vortex and finally to multidomain. This work provides guidance for the controllable synthesis of 2D inverse spinel-type crystals and expands the range of magnetic vortex materials into magnetic semiconductors.

Enhanced Stress Stability in Flexible Co/Pt Multilayers with Strong Perpendicular Magnetic Anisotropy.

Due to the magnetoelastic coupling, the magnetic properties of many flexible magnetic films (such as Fe, Co, and Ni) are sensitive to mechanical stress, which deteriorates the performance of flexible magnetoelectronic devices. We show that by stacking Co and Pt alternatively to form multilayers with strong perpendicular magnetic anisotropy (PMA), both magnetic hysteresis and magnetic domain measurements reveal robust PMA against external stress. As the PMA weakens at increased Co thickness, the magnetic anisotropy is vulnerable to external stress. These results were understood based on a micromagnetic model, which suggests that the strength of magnetoelastic anisotropy with respect to initial effective magnetic anisotropy affects the stress-stability of the film. Although the stress coefficient of magnetoelastic anisotropy is enhanced at reduced Co thickness, the concomitant increase of initial effective magnetic anisotropy guarantees a robust PMA against external stress. Our results provide a route to constructing flexible magnetoelectronic devices with enhanced stress stability.

Synthesis of Ultralong Carbon Nanotubes with Ultrahigh Yields.

Ultralong carbon nanotubes (CNTs) are in huge demand in many cutting-edge fields due to their macroscale lengths, perfect structures, and extraordinary properties, while their practical application is limited by the difficulties in their mass production. Herein, we report the synthesis of ultralong CNTs with a dramatically increased yield by a simple but efficient substrate interception and direction strategy (SIDS), which couples the advantages of floating-catalyst chemical vapor deposition with the flying-kite-like growth mechanism of ultralong CNTs. The SIDS-assisted approach prominently improves the catalyst utilization and significantly increases the yield. The areal density of the ultralong CNT arrays with length of over 1 cm reached a record-breaking value of ∼6700 CNTs mm-1, which is 2-3 orders of magnitude higher than the previously reported values obtained by traditional methods. The SIDS provides a solution for synthesizing high-quality ultralong CNTs with high yields, laying the foundation for their mass production.

Elastic Relaxor Ferroelectric by Thiol-ene Click Reaction.

As ferroelectrics hold significance and application prospects in wearable devices, the elastification of ferroelectrics becomes more and more important. Nevertheless, achieving elastic ferroelectrics requires stringent synthesis conditions, while the elastification of relaxor ferroelectric materials remains unexplored, presenting an untapped potential for utilization in energy storage and actuation for wearable electronics. The thiol-ene click reaction offers a mild and rapid reaction platform to prepare functional polymers. Therefore, we employed this approach to obtain an elastic relaxor ferroelectric by crosslinking an intramolecular carbon-carbon double bonds (CF=CH) polymer matrix with multiple thiol groups via a thiol-ene click reaction. The resulting elastic relaxor ferroelectric demonstrates pronounced relaxor-type ferroelectric behaviour. This material exhibits low modulus, excellent resilience, and fatigue resistance, maintaining a stable ferroelectric response even under strains up to 70 %. This study introduces a straightforward and efficient approach for the construction of elastic relaxor ferroelectrics, thereby expanding the application possibilities in wearable electronics.

Calix[4]arene-Functionalized Titanium-Oxo Compounds for Perceiving Differences in Catalytic Reactivity Between Mono- and Multimetallic Sites.

While the difference in catalytic reactivity between mono- and multimetallic sites is often attributed to more than just the number of active sites, still few catalyst model systems have been developed to explore more underlying causal factors. In this work, we have elaborately designed and constructed three stable calix[4]arene (C4A)-functionalized titanium-oxo compounds, Ti-C4A, Ti4-C4A, and Ti16-C4A, with well-defined crystal structures, increasing nuclearity, and tunable light absorption capacity and energy levels. Among them, Ti-C4A and Ti16-C4A can be taken as model catalysts to compare the differences in reactivity between mono- and multimetallic sites. Taking CO2 photoreduction as the basic catalytic reaction, both compounds can achieve CO2-to-HCOO- conversion with high selectivity (close to 100%). Moreover, the catalytic activity of multimetallic Ti16-C4A is up to 2265.5 µmol g-1 h-1, which is at least 12 times higher than that of monometallic Ti-C4A (180.0 µmol g-1 h-1), and is the best-performing crystalline cluster-based photocatalyst known to date. Catalytic characterization combined with density functional theory calculations shows that in addition to the advantage of having more metal active sites (for adsorption and activation of more CO2 molecules), Ti16-C4A can effectively reduce the activation energy required for the CO2 reduction reaction by completing the multiple electron-proton transfer process rapidly with synergistic metal-ligand catalysis, thus exhibiting superior catalytic performance to that of monometallic Ti-C4A. This work provides a crystalline catalyst model system to explore the potential factors underlying the difference in catalytic reactivity between mono- and multimetallic sites.

Selective Dual-Ion Modulation in Solid-State Magnetoelectric Heterojunctions for In-Memory Encryption.

Nanoionic technologies are identified as a promising approach to modulating the physical properties of solid-state dielectrics, which have resulted in various emergent nanodevices, such as nanoionic resistive switching devices and magnetoionic devices for memory and computing applications. Previous studies are limited to single-type ion manipulation, and the investigation of multiple-type ion modulation on the coupled magnetoelectric effects, for developing information devices with multiple integrated functionalities, remains elusive. Here, a dual-ion solid-state magnetoelectric heterojunction based on Pt/HfO2- x /NiOy /Ni with reconfigurable magnetoresistance (MR) characteristics is reported for in-memory encryption. It is shown that the oxygen anions and nickel cations can be selectively driven by voltages with controlled polarity and intensity, which concurrently change the overall electrical resistance and the interfacial magnetic coupling, thus significantly modulate the MR symmetry. Based on this device, a magnetoelectric memory prototype array with in-memory encryption functionality is designed for the secure storage of image and digit information. Along with the advantages including simple structure, multistate encryption, good reversibility, and nonvolatile modulation capability, this proof-of-concept device opens new avenues toward next-generation compact electronics with integrated information functionalities.

Two Birds with One Stone: Broadband Electromagnetic Wave Absorption and Anticorrosion Performance in 2-18 GHz for Prussian Blue Analog Derivatives Aimed for Practical Applications.

Nowadays, the exploration of electromagnetic (EM) wave absorbers with anticorrosion to improve the survivability and environmental adaptability of military targets in the harsh environments is becoming an attractive and unavoidable challenge. Herein, through modulation of the metal composition in the precursors, the core@shell structure Prussian blue analog-derived NiCo@C, CoFe@C, NiFe@C, and NiCoFe@C are obtained with excellent EM wave absorption performance. As for NiCoFe@C, ascribed to the coupling effect of the dual magnetic alloy, a minimum reflection loss (RL) of -47.6 dB and an effective absorption bandwidthof 5.83 GHz are realized, which cover the whole Ku-band. Meanwhile, four absorbers display the lower corrosion current density (10-4 -10-6 A cm-2 ) and larger polarization resistance (104 -106  Ω) under acid, neutral, and alkaline corrosion conditions over uninterrupted 30 days. Furthermore, due to the spatial barrier effect and the passivation effect of the graphitic carbon shell , the continuous salt spray test has little effect on RL performance and inconspicuously changes the surface morphologies of coating, demonstrating its excellent bifunctional performance. This work lays the foundation for the development of metal-organic frameworks-derived materials with both anticorrosion and EM wave absorption performance.

Glycomic Analysis Reveals That Sialyltransferase Inhibition Is Involved in the Antiviral Effects of Arbidol.

Due to the high mutation rate of influenza virus and the rapid increase of drug resistance, it is imperative to discover host-targeting antiviral agents with broad-spectrum antiviral activity. Considering the discrepancy between the urgent demand of antiviral drugs during an influenza pandemic and the long-term process of drug discovery and development, it is feasible to explore host-based antiviral agents and strategies from antiviral drugs on the market. In the current study, the antiviral mechanism of arbidol (ARB), a broad-spectrum antiviral drug with potent activity at early stages of viral replication, was investigated from the aspect of hemagglutinin (HA) receptors of host cells. N-glycans that act as the potential binding receptors of HA on 16-human bronchial epithelial (16-HBE) cells were comprehensively profiled for the first time by using an in-depth glycomic approach based on TiO2-PGC chip-Q-TOF MS. Their relative levels upon the treatment of ARB and virus were carefully examined by employing an ultra-high sensitive qualitative method based on Chip LC-QQQ MS, showing that ARB treatment led to significant and extensive decrease of sialic acid (SA)-linked N-glycans (SA receptors), and thereby impaired the virus utilization on SA receptors for rolling and entry. The SA-decreasing effect of ARB was demonstrated to result from its inhibitory effect on sialyltransferases (ST), ST3GAL4 and ST6GAL1 of 16-HBE cells. Silence of STs, natural ST inhibitors, as well as sialidase treatment of 16-HBE cells, resulted in similar potent antiviral activity, whereas ST-inducing agent led to the diminished antiviral effect of ARB. These observations collectively suggesting the involvement of ST inhibition in the antiviral effect of ARB. IMPORTANCE This study revealed, for the first time, that ST inhibition and the resulted destruction of SA receptors of host cells may be an underlying mechanism for the antiviral activity of ARB. ST inhibition has been proposed as a novel host-targeting antiviral approach recently and several compounds are currently under exploration. ARB is the first antiviral drug on the market that was found to possess ST inhibiting function. This will provide crucial evidence for the clinical usages of ARB, such as in combination with neuraminidase (NA) inhibitors to exert optimized antiviral effect, etc. More importantly, as an agent that can inhibit the expression of STs, ARB can serve as a novel lead compound for the discovery and development of host-targeting antiviral drugs.

Tunable Chromic Properties of Viologen-Metal Polymers Modulated by Coordination Modes for Inkless Erasable Printing.

Inkless and erasable printing (IEP) based on chromic materials holds great promise to alleviate environmental and sustainable problems. Metal-organic polymers (MOPs) are bright platforms for constructing IEP materials. However, it is still challenging to design target MOPs with excellent specific functions rationally due to the intricate component-structure-property relationships. Herein, an effective strategy was proposed for the rational design IEP-MOP materials. The stimuli-responsive viologen moiety was introduced into the construction of MOPs to give it potential chromic behaviors and two different coordination models (i. e. bilateral coordination model, M1 ; unilateral coordinated model, M2 ) based on the same viologen ligand were designed. Aided by theoretical calculations, model M1 was recommended secondarily as a more suitable system for IEP materials. Along this line, two representative viologen-ZnII MOPs 1 and 2 with models M1 and M2 were synthesized successfully. Experiments exhibit that 1 does have quicker stimuli response, stronger color contrast and longer radical lifetime compared to 2. Significantly, the obtained 1-IEP media brightly inherits the excellent chromic characteristics of 1 and the flexibility of the paper at the same time, which achieves most daily printing requirements, as well as enough resolution and durability to be used in identification by smart device.