Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 81
Filtrar
1.
Langmuir ; 37(16): 4984-4996, 2021 04 27.
Artigo em Inglês | MEDLINE | ID: mdl-33861930

RESUMO

Hydroxyapatite (HA) coating has received significant attention in the scientific community for the development of implants, and HA coating on titanium oxide (TiO2) nanotubes has shown potential benefits in the improvement of cell proliferation, adhesion, and differentiation. In this study, a HA coating on a TiO2 nanotubular surface was developed to improve the biocompatibility of the titanium (Ti) surface via magnetron sputtering. Scanning electron microscopy (SEM), surface profilometry, and water contact goniometry revealed that HA-coated TiO2 nanotubes influenced the surface roughness (Ra) and hydrophilicity. The XRD and FTIR peaks indicated the presence of crystalline phases of TiO2 (anatase) and HA-coated TiO2 nanotubes after annealing at 500 °C for 120 min. The HA-coated TiO2 nanotubes showed significantly increased Ra and decreased water contact angle (θ) compared to the as-anodized TiO2 nanotubular and bare CP-Ti surfaces. MTS assay using osteoblast-like cells confirmed that the HA-coated TiO2 nanotubular surface provided an enhanced cell attachment and growth when compared to as-anodized TiO2 nanotubular and pure CP-Ti surfaces.

2.
Clin Oral Implants Res ; 27(2): e15-24, 2016 Feb.
Artigo em Inglês | MEDLINE | ID: mdl-25359716

RESUMO

OBJECTIVE: Our objective was to study the role of Collagen type-I (Col-I) coating on Magnesium-Zirconia (Mg-Zr) alloys, containing different quantities of Strontium (Sr), in enhancing the in vitro bioactivity and in vivo bone-forming and mineralisation properties of the implants. MATERIALS AND METHODS: MC3T3-E1 osteoblast cell line was used to analyse the in vitro properties of Col-I coated and uncoated alloys. Cell viability analysis was performed by MTT assay; cell attachment on alloy surfaces was studied by scanning electron microscopy (SEM); and gene profiling of bone-specific markers in cells plated on uncoated alloys was performed by Quantitative RT-PCR. In vivo studies were performed by implanting 2-mm-sized cylindrical pins of uncoated and coated alloys in male New Zealand white rabbits (n = 33). Bone formation and mineralisation was studied by Dual Energy X-ray Absorptiometry (DXA) and histological analysis at one and three months post-implantation. RESULTS: Our results clearly showed that Sr content and Col-I coating of Mg-Zr-Sr alloys significantly improved their bone inducing activity in vitro and in vivo. Osteoblasts on coated alloys showed better viability and surface binding than those on uncoated alloys. Sr inclusion in the alloys enhanced their bone-specific gene expression. The in vivo activity of implants with higher Sr and Col-I coating was superior to uncoated and other coated alloys as they showed faster bone induction and higher mineral content in the newly formed bone. CONCLUSION: Our results indicate that bone-forming and mineralising activity of Mg-Zr-Sr implants can be significantly improved by controlling their Sr content and coating their surface with Col-I.


Assuntos
Reabsorção Óssea/induzido quimicamente , Materiais Revestidos Biocompatíveis/farmacologia , Colágeno Tipo I/farmacologia , Magnésio/farmacologia , Osteogênese/efeitos dos fármacos , Estrôncio/farmacologia , Zircônio/farmacologia , Absorciometria de Fóton , Animais , Linhagem Celular , Sobrevivência Celular , Microscopia Eletrônica de Varredura , Osteoblastos , Coelhos , Reação em Cadeia da Polimerase em Tempo Real
3.
Chemistry ; 20(3): 824-30, 2014 Jan 13.
Artigo em Inglês | MEDLINE | ID: mdl-24339205

RESUMO

Spinel cathode materials consisting of LiMn2 O4 @LiNi0.5 Mn1.5 O4 hollow microspheres have been synthesized by a facile solution-phase coating and subsequent solid-phase lithiation route in an atmosphere of air. When used as the cathode of lithium-ion batteries, the double-shell LiMn2 O4 @LiNi0.5 Mn1.5 O4 hollow microspheres thus obtained show a high specific capacity of 120 mA h g(-1) at 1 C rate, and excellent rate capability (90 mAhg(-1) at 10 C) over the range of 3.5-5 V versus Li/Li(+) with a retention of 95 % over 500 cycles.

4.
Acta Biomater ; 173: 509-525, 2024 Jan 01.
Artigo em Inglês | MEDLINE | ID: mdl-38006909

RESUMO

Zinc (Zn), magnesium (Mg), and their respective alloys have attracted great attention as biodegradable bone-implant materials due to their excellent biocompatibility and biodegradability. However, the poor mechanical strength of Zn alloys and the rapid degradation rate of Mg alloys limit their clinical application. The manufacture of Zn and Mg bimetals may be a promising way to improve their mechanical and degradation properties. Here we report on Zn/Mg multilayered composites prepared via an accumulative roll bonding (ARB) process. With an increase in the number of ARB cycles, the thicknesses of the Zn layer and the Mg layer were reduced, while a large number of heterogeneous interfaces were introduced into the Zn/Mg multilayered composites. The composite samples after 14 ARB cycles showed the highest yield strength of 411±3 MPa and highest ultimate tensile strength of 501±3 MPa among all the ARB processed samples, significantly higher than those of the Zn/Zn and Mg/Mg multilayered samples. The Zn and Mg layers remained continuous in the Zn/Mg composite samples after annealing at 150 °C for 10 min, resulting in a decrease in yield strength from 411±3 MPa to 349±3 MPa but an increase in elongation from 8±1% to 28±1%. The degradation rate of the Zn/Mg multilayered composite samples in Hanks' solution was ranged from 127±18 µm/y to 6±1 µm/y. The Zn/Mg multilayered composites showed over 100% cell viability with their 25% and 12.5% extracts in relation to MG-63 cells after culturing for 3 d, indicating excellent cytocompatibility. STATEMENT OF SIGNIFICANCE: This work reports a biodegradable Zn/Mg multilayered composite prepared by accumulative roll bonding (ARB) process. The yield and ultimate tensile strength of the Zn/Mg multilayered composites were improved due to grain refinement and the introduction of a large number of heterogeneous interfaces. The composite samples after 14 ARB cycles showed the highest yield strength of 411±3 MPa and highest ultimate tensile strength of 501±3 MPa among all the ARB processed samples. The degradation rate of the Zn/Mg multilayered composite meets the required degradation rate for biodegradable bone-implant materials. The results demonstrated that it is a very promising approach to improve the strength and biocompatibility of biodegradable Zn-based alloys.


Assuntos
Materiais Biocompatíveis , Magnésio , Teste de Materiais , Zinco , Corrosão , Antagonistas de Receptores de Angiotensina , Inibidores da Enzima Conversora de Angiotensina , Implantes Absorvíveis , Ligas
5.
Acta Biomater ; 184: 444-460, 2024 Aug.
Artigo em Inglês | MEDLINE | ID: mdl-38897338

RESUMO

Metallic biomaterials, such as stainless steels, cobalt-chromium-molybdenum (Co-Cr-Mo) alloys, and titanium (Ti) alloys, have long been used as load-bearing implant materials due to their metallic mechanical strength, corrosion resistance, and biocompatibility. However, their magnetic susceptibility and elastic modulus of more than 100 GPa significantly restrict their therapeutic applicability. In this study, spinodal Zr60Nb40, Zr50Nb50, and Zr40Nb60 (at.%) alloys were selected from the miscibility gap based on the Zr-Nb binary phase diagram and prepared by casting, cold rolling, and aging. Their microstructure, mechanical properties, corrosion resistance, magnetic susceptibility, and biocompatibility were systematically evaluated. Spinodal decomposition to alternating nanoscale Zr-rich ß1 and Nb-rich ß2 phases occurred in the cold-rolled Zr-Nb alloys during aging treatment at 650 °C. In addition, a minor amount of α phase was precipitated in Zr60Nb40 due to the thermodynamic instability of the Zr-rich ß1 phase. Spinodal decomposition significantly improved the mechanical strength of the alloys due to nanosized dual-cubic reinforcement. The Zr-Nb alloys showed an electrochemical corrosion rate of 94-262 nm per year in Hanks' solution because of formation of dense passive films composed of ZrO2 and Nb2O5 during the polarization process. The magnetic susceptibilities of the Zr-Nb alloys were significantly lower than those of commercial Co-Cr-Mo and Ti alloys. The cell viability of the Zr-Nb alloys was more than 98 % toward MC3T3-E1 cells. Overall, the spinodal Zr-Nb alloys have enormous potential as bone-implant materials due to their outstanding overall mechanical properties, extraordinary corrosion resistance, low magnetic susceptibility, and sufficient bicompatibility. STATEMENT OF SIGNIFICANCE: This work reports on spinodal Zr-Nb alloys with heterostructure. Spinodal decomposition significantly improved their mechanical strength due to the nanosized dual-cubic reinforcement. The Zr-Nb alloys showed large corrosion resistance in Hanks' solution because of formation of dense passivation films composed of ZrO2 and Nb2O5 during the polarization process. The magnetic susceptibilities of the Zr-Nb alloys were significantly lower than those of commercial Co-Cr-Mo and Ti alloys. The cell viability of the Zr-Nb alloys was more than 98 % toward MC3T3-E1 cells. The results demonstrate that spinodal Zr-Nb alloys have enormous potential as bone-implant materials due to their outstanding overall mechanical properties, high corrosion resistance, low magnetic susceptibility, and sufficient biocompatibility.


Assuntos
Ligas , Nióbio , Zircônio , Ligas/química , Zircônio/química , Nióbio/química , Camundongos , Animais , Teste de Materiais , Estresse Mecânico , Ortopedia , Módulo de Elasticidade , Corrosão , Materiais Biocompatíveis/química
6.
Acta Biomater ; 177: 538-559, 2024 03 15.
Artigo em Inglês | MEDLINE | ID: mdl-38253302

RESUMO

Zinc (Zn) and some of its alloys are recognized as promising biodegradable implant materials due to their acceptable biocompatibility, facile processability, and moderate degradation rate. Nevertheless, the limited mechanical properties and stability of as-cast Zn alloys hinder their clinical application. In this work, hot-rolled (HR) and hot-extruded (HE) Zn-5 wt.% gadolinium (Zn-5Gd) samples were prepared by casting and respectively combining with hot rolling and hot extrusion for bone-implant applications. Their microstructure evolution, mechanical properties, corrosion behavior, cytotoxicity, antibacterial ability, and in vitro and in vivo osteogenesis were systematically evaluated. The HR and HE Zn-5Gd exhibited significantly improved mechanical properties compared with those of their pure Zn counterparts and the HR Zn-5Gd showed a unique combination of tensile properties with an ultimate tensile strength of ∼311.6 MPa, yield strength of ∼236.5 MPa, and elongation of ∼40.6%, all of which are greater than the mechanical properties required for bone-implant materials. The HR and HE Zn-5Gd showed higher corrosion resistance than their pure Zn counterpart in Hanks' solution and the HE Zn-5Gd had the lowest corrosion rate of 155 µm/y measured by electrochemical corrosion and degradation rate of 26.9 µm/y measured by immersion testing. The HR and HE Zn-5Gd showed high cytocompatibility toward MC3T3-E1 and MG-63 cells, high antibacterial effects against S. aureus, and better in vitro osteogenic activity than their pure Zn counterparts. Furthermore, the HE Zn-5Gd exhibited better in vivo biocompatibility, osteogenesis, and osteointegration ability than pure Zn and pure Ti. STATEMENT OF SIGNIFICANCE: This work reports the mechanical properties, corrosion behaviors, cytocompatibility, antibacterial ability, in vitro and in vivo osteogenesis of biodegradable Zn-Gd alloy for bone-implant applications. Our findings demonstrate that the hot-rolled (HR) Zn-5Gd showed a unique combination of tensile properties with an ultimate tensile strength of ∼311.6 MPa, yield strength of ∼236.5 MPa, and elongation of ∼40.6%. The HR and HE Zn-5Gd showed higher corrosion resistance than their pure Zn counterpart in Hanks' solution. The HR and HE Zn-5Gd showed high cytocompatibility toward MC3T3-E1 and MG-63 cells, good antibacterial effects against S. aureus, and better in vitro osteogenic activity. Furthermore, the HE Zn-5Gd exhibited better in vivo biocompatibility, osteogenesis, and osteointegration ability than pure Zn and pure Ti.


Assuntos
Ligas , Osteogênese , Teste de Materiais , Ligas/farmacologia , Ligas/química , Zinco/farmacologia , Zinco/química , Staphylococcus aureus , Antibacterianos/farmacologia , Implantes Absorvíveis , Corrosão , Materiais Biocompatíveis/química
7.
Adv Healthc Mater ; 13(12): e2303975, 2024 05.
Artigo em Inglês | MEDLINE | ID: mdl-38235953

RESUMO

Magnesium (Mg) alloys are widely used in bone fixation and bone repair as biodegradable bone-implant materials. However, their clinical application is limited due to their fast corrosion rate and poor mechanical stability. Here, the development of Mg-2Zn-0.5Ca-0.5Sr (MZCS) and Mg-2Zn-0.5Ca-0.5Zr (MZCZ) alloys with improved mechanical properties, corrosion resistance, cytocompatibility, osteogenesis performance, and antibacterial capability is reported. The hot-extruded (HE) MZCZ sample exhibits the highest ultimate tensile strength of 255.8 ± 2.4 MPa and the highest yield strength of 208.4 ± 2.8 MPa and an elongation of 15.7 ± 0.5%. The HE MZCS sample shows the highest corrosion resistance, with the lowest corrosion current density of 0.2 ± 0.1 µA cm-2 and the lowest corrosion rate of 4 ± 2 µm per year obtained from electrochemical testing, and a degradation rate of 368 µm per year and hydrogen evolution rate of 0.83 ± 0.03 mL cm-2 per day obtained from immersion testing. The MZCZ sample shows the highest cell viability in relation to MC3T3-E1 cells among all alloy extracts, indicating good cytocompatibility except at 25% concentration. Furthermore, the MZCZ alloy shows good antibacterial capability against Staphylococcus aureus.


Assuntos
Ligas , Antibacterianos , Magnésio , Teste de Materiais , Osteogênese , Antibacterianos/farmacologia , Antibacterianos/química , Ligas/química , Ligas/farmacologia , Corrosão , Animais , Osteogênese/efeitos dos fármacos , Camundongos , Magnésio/química , Magnésio/farmacologia , Staphylococcus aureus/efeitos dos fármacos , Implantes Absorvíveis , Materiais Biocompatíveis/química , Materiais Biocompatíveis/farmacologia , Zinco/química , Zinco/farmacologia , Linhagem Celular , Estrôncio/química , Estrôncio/farmacologia , Zircônio/química , Zircônio/farmacologia
8.
Acta Biomater ; 2024 Jul 10.
Artigo em Inglês | MEDLINE | ID: mdl-38997078

RESUMO

Biodegradable Zn alloys have significant application potential for hard-tissue implantation devices owing to their suitable degradation behavior and favorable biocompatibility. Nonetheless, pure Zn and its alloys in the as-cast state are mechanically instable and low in strength, which restricts their clinical applicability. Here, we report the exceptional mechanical, corrosion, and biocompatibility properties of hot-extruded Zn-5RE (wt.%, RE = rare earth of Y; or Ho; or Er) alloys intended for use in biodegradable bone substitutes. The microstructural characteristics, mechanical behavior, corrosion resistance, cytocompatibility, osteogenic differentiation, and capacity of osteogenesis in vivo of the Zn-5RE alloys are comparatively investigated. The Zn-5Y alloy demonstrates the best tensile properties, encompassing a 138 MPa tensile yield strength, a 302 MPa ultimate tensile strength, and 63% elongation, while the Zn-5Ho alloy shows the highest compression yield strength of 260 MPa and Vickers hardness of 104 HV. The Zn-5Er alloy shows a 126 MPa tensile yield strength, a 279 MPa ultimate tensile strength, 52% elongation, a 196 MPa compression yield strength, and a 101 HV Vickers microhardness. Further, the Zn-5Er alloy has a 130 µm per year corrosion rate in electrochemical tests and a 26 µm per year degradation rate in immersion tests, which is the lowest among the tested alloys. It also has the best in vitro osteogenic differentiation ability and capacity for osteogenesis and osteointegration in vivo after implantation in rat femurs among the Zn-5RE alloys, indicating promising potential in load-bearing biodegradable internal bone-fixation applications. STATEMENT OF SIGNIFICANCE: This work reports the exceptional mechanical, corrosion, and biocompatibility properties of hot-extruded (HE) Zn-5 wt.%-rare earth (Zn-5RE) alloys using single yttrium (Y), holmium (Ho), and erbium (Er) alloying for biodegradable bone-implant applications. Our findings demonstrate that the HE Zn-5Er alloy showed σuts of 279 MPa, tensile yield strength of 126 MPa, elongation of 51.6%, compression yield strength of 196 MPa, and microhardness of 101.2 HV. Further, HE Zn-5Er showed the lowest electrochemical corrosion rate of 130 µm/y and lowest degradation rate of 26 µm/y, and the highest in vitro osteogenic differentiation ability, in vivo osteogenesis, and osteointegration ability after implantation in rat femurs among the Zn-5RE alloys, indicating promising potential in load-bearing biodegradable internal bone-fixation applications.

9.
Adv Sci (Weinh) ; 11(13): e2307812, 2024 Apr.
Artigo em Inglês | MEDLINE | ID: mdl-38243646

RESUMO

Zinc (Zn)-dysprosium (Dy) binary alloys are promising biodegradable bone fracture fixation implants owing to their attractive biodegradability and mechanical properties. However, their clinical application is a challenge for bone fracture healing, due to the lack of Zn-Dy alloys with tailored proper bio-mechanical and osteointegration properties for bone regeneration. A Zn-5Dy alloy with high strength and ductility and a degradation rate aligned with the bone remodeling cycle is developed. Here, mechanical stability is further confirmed, proving that Zn-5Dy alloy can resist aging in the degradation process, thus meeting the mechanical requirements of fracture fixation. In vitro cellular experiments reveal that the Zn-5Dy alloy enhances osteogenesis and angiogenesis by elevating SIRT4-mediated mitochondrial function. In vivo Micro-CT, SEM-EDS, and immunohistochemistry analyses further indicate good biosafety, suitable biodegradation rate, and great osteointegration of Zn-5Dy alloy during bone healing, which also depends on the upregulation of SIRT4-mediated mitochondrial events. Overall, the study is the first to report a Zn-5Dy alloy that exerts remarkable osteointegration properties and has a strong potential to promote bone healing. Furthermore, the results highlight the importance of mitochondrial modulation and shall guide the future development of mitochondria-targeting materials in enhancing bone fracture healing.


Assuntos
Ligas , Osteogênese , Implantes Absorvíveis , Ligas/química , Ligas/farmacologia , Teste de Materiais , Mitocôndrias/efeitos dos fármacos , Zinco/química , Disprósio/química , Disprósio/farmacologia , Osteogênese/efeitos dos fármacos , Sirtuínas/efeitos dos fármacos , Humanos , Fraturas Ósseas/tratamento farmacológico
10.
Chemistry ; 19(30): 9811-6, 2013 Jul 22.
Artigo em Inglês | MEDLINE | ID: mdl-23788047

RESUMO

Charged up: A general soft-template route for the synthesis of uniform hollow carbon microspheres embedded with transition-metal oxide nanocrystals (OHCMs) has been developed (see figure). The obtained OHCMs possess a microsized spherical shape, embedded transition-metal oxide nanocrystals, and fully encapsulating conductive carbon shells, which endow the resulting anode materials with high specific capacities, rate capabilities, electrode densities, and cycle stabilities.

11.
Acta Biomater ; 157: 701-719, 2023 02.
Artigo em Inglês | MEDLINE | ID: mdl-36476647

RESUMO

Zinc (Zn)-based alloys and composites are gaining increasing interest as promising biodegradable implant materials due to their appropriate biodegradation rates and biological functionalities. However, the inadequate mechanical strength and ductility of pure Zn have restricted its application. In this study, Zn matrix composites (ZMCs) reinforced with 0.1-0.4 wt.% graphene nanoplatelets (GNP) fabricated via powder metallurgy were investigated as potential biodegradable implant materials. The microstructures, mechanical properties, and corrosion behaviors of the GNP-reinforced ZMCs were characterized using optical microscopy, scanning electron microscopy combined with energy-dispersive X-ray spectroscopy, Raman spectroscopy, compression testing, and electrochemical and immersion testing in Hanks' balanced salt solution (HBSS). The microstructural study revealed that the GNP was uniformly dispersed in the ZMCs after ball milling and sintering at 420°C for 6 h. The microhardness, compressive yield strength, ultimate compressive strength, and compressive strain of the ZMC-0.2GNP were 69 HV, 123 MPa, 247 MPa, and 23 %, respectively, improvements of ∼ 18 %, 50%, ∼ 28%, and ∼ 15% compared to pure Zn. The corrosion rate of the ZMCs were lower than that of the pure Zn in HBSS, and the ZMC-0.2GNP composite exhibited the lowest corrosion rate of 0.09 mm/y as measured by electrochemical testing. Biocompatibility assessment indicated that the diluted extracts of pure Zn and GNP-reinforced ZMCs with concentrations of 12.5% and 6.25% exhibited no cytotoxicity after cell culturing for up to 5 days, and the diluted extracts of ZMC-0.2 GNP composite revealed more than 90% cell viability after cell culturing of 3 days, showing the satisfying cytocompatibility. STATEMENT OF SIGNIFICANCE: Biodegradable Zn is a promising candidate material for orthopedic implant applications. Nonetheless, the inadequate mechanical strength and ductility of pure Zn limited its clinical application. In this study, Zn matrix composites (ZMCs) reinforced with 0.1-0.4 wt.% graphene nanoplatelets (GNP) were developed via powder metallurgy, and the reinforcing efficacy of GNP on their mechanical properties was investigated. The addition of GNP significantly improved the compressive properties of ZMCs, with the Zn-0.2GNP composite exhibiting the best compressive properties, including 123 MPa compressive yield strength, 247 MPa ultimate compressive strength, and 22.9% compressive strain. Further, the 12.5% concentration extract of the ZMCs exhibited no cytotoxicity after cell culturing for 5 d toward SaOS2 cells.


Assuntos
Materiais Biocompatíveis , Grafite , Materiais Biocompatíveis/química , Teste de Materiais , Grafite/farmacologia , Corrosão , Zinco/farmacologia , Zinco/química , Pós , Implantes Absorvíveis , Ligas/química
12.
Acta Biomater ; 169: 641-660, 2023 10 01.
Artigo em Inglês | MEDLINE | ID: mdl-37541605

RESUMO

Zinc (Zn) and its alloys are used in bone-fixation devices as biodegradable bone-implant materials due to their good biosafety, biological function, biodegradability, and formability. Unfortunately, the clinical application of pure Zn is hindered by its insufficient mechanical properties and slow degradation rate. In this study, a Zn-5 wt.% lanthanum (Zn-5La) alloy with enhanced mechanical properties, suitable degradation rate, and cytocompatibility was developed through La alloying and hot extrusion. The hot-extruded (HE) Zn-5La alloy showed ultimate tensile strength of 286.3 MPa, tensile yield strength of 139.7 MPa, elongation of 35.7%, compressive yield strength of 262.7 MPa, and microhardness of 109.7 HV. The corrosion resistance of the HE Zn-5La in Hanks' and Dulbecco's modified Eagle medium (DMEM) solutions gradually increased with prolonged immersion time. Further, the HE Zn-5La exhibited an electrochemical corrosion rate of 36.7 µm/y in Hanks' solution and 11.4 µm/y in DMEM solution, and a degradation rate of 49.5 µm/y in Hanks' solution and 30.3 µm/y in DMEM solution, after 30 d of immersion. The corrosion resistance of both HE Zn and Zn-5La in DMEM solution was higher than in Hanks' solution. The 25% concentration extract of the HE Zn-5La showed a cell viability of 106.5%, indicating no cytotoxicity toward MG-63 cells. We recommend the HE Zn-5La alloy as a promising candidate material for biodegradable bone-implant applications. STATEMENT OF SIGNIFICANCE: This work reports the mechanical properties, corrosion and degradation behaviors, in vitro cytocompatibility and antibacterial ability of biodegradable Zn-5La alloy for bone-implant applications. Our findings demonstrate that the hot-extruded (HE) Zn-5La alloy showed an ultimate tensile strength of 286.3 MPa, a yield strength of 139.7 MPa, an elongation of 35.7%, compressive yield strength of 262.7 MPa, and microhardness of 109.7 HV. HE Zn-5La exhibited appropriate degradation rates in Hanks' and DMEM solutions. Furthermore, the HE Zn-5La alloy showed good cytocompatibility toward MG-63 and MC3T3-E1 cells and greater antibacterial ability against S. aureus.


Assuntos
Ligas , Zinco , Teste de Materiais , Ligas/farmacologia , Ligas/química , Corrosão , Zinco/farmacologia , Zinco/química , Staphylococcus aureus , Implantes Absorvíveis , Antibacterianos , Materiais Biocompatíveis/farmacologia , Materiais Biocompatíveis/química
13.
Acta Biomater ; 155: 684-702, 2023 01 01.
Artigo em Inglês | MEDLINE | ID: mdl-36328128

RESUMO

The unique combination of biodegradability, biocompatibility, and functionality of zinc (Zn)-based alloys makes them highly desirable for a wide range of medical applications. However, a long-standing problem associated with this family of biodegradable alloys in the as-cast state is their limited mechanical strength and slow degradation rate. Here we report the development of Zn-xDy (x = 1, 3, and 5 wt.%) alloys with high strength, ductility, cytocompatibility, antibacterial ability, and appropriate degradation rate for biodegradable bone-implant applications. Our results indicate that the mechanical properties of Zn-xDy alloys were effectively improved with increasing Dy addition and hot-rolling due to the second-phase strengthening. The hot-rolled (HR) Zn-3Dy alloy showed the best combined mechanical performance with an ultimate tensile strength of 270.5 MPa, a yield strength of 214.8 MPa, an elongation of 55.1%, and Brinell hardness of 75.9 HB. The corrosion and degradation rates of HR Zn-xDy alloys in Hanks' solution gradually increased with increasing Dy addition due to the intensification of galvanic corrosion. The HR Zn-3Dy alloy showed high antibacterial ability against S. aureus and cytocompatibility toward MC3T3-E1 cells among all the HR alloys. Overall, the HR Zn-3Dy alloy can be considered a promising biodegradable material for bone implants. STATEMENT OF SIGNIFICANCE: This work reports on Zn-xDy (x = 1, 3, and 5%) alloys fabricated by Dy alloying followed by hot-rolling for biodegradable bone-implant applications. Our findings demonstrate that the hot-rolled (HR) Zn-3Dy alloy showed the best combined mechanical performance with an ultimate tensile strength of 270.5 MPa, a yield strength of 214.8 MPa, an elongation of 55.1%, and Brinell hardness of 75.9 HB. The corrosion and degradation rates of HR Zn-xDy alloys in Hanks' solution gradually increased with increasing Dy addition due to the intensification of galvanic corrosion. Furthermore, the HR Zn-3Dy alloy showed greater antibacterial ability against S. aureus and the best cytocompatibility toward MC3T3-E1 cells among all the HR alloys.


Assuntos
Ligas , Zinco , Resistência à Tração , Teste de Materiais , Ligas/farmacologia , Zinco/farmacologia , Staphylococcus aureus , Implantes Absorvíveis , Antibacterianos/farmacologia , Corrosão , Materiais Biocompatíveis
14.
Tissue Eng Part C Methods ; 29(6): 276-283, 2023 06.
Artigo em Inglês | MEDLINE | ID: mdl-37233718

RESUMO

Owing to its superior mechanical and biological properties, titanium metal is widely used in dental implants, orthopedic devices, and bone regenerative materials. Advances in 3D printing technology have led to more and more metal-based scaffolds being used in orthopedic applications. Microcomputed tomography (µCT) is commonly applied to evaluate the newly formed bone tissues and scaffold integration in animal studies. However, the presence of metal artifacts dramatically hinders the accuracy of µCT analysis of new bone formation. To acquire reliable and accurate µCT results that reflect new bone formation in vivo, it is crucial to lessen the impact of metal artifacts. Herein, an optimized procedure for calibrating µCT parameters using histological data was developed. In this study, the porous titanium scaffolds were fabricated by powder bed fusion based on computer-aided design. These scaffolds were implanted in femur defects created in New Zealand rabbits. After 8 weeks, tissue samples were collected to assess new bone formation using µCT analysis. Resin-embedded tissue sections were then used for further histological analysis. A series of deartifact two-dimensional (2D) µCT images were obtained by setting the erosion radius and the dilation radius in the µCT analysis software (CTan) separately. To get the µCT results closer to the real value, the 2D µCT images and corresponding parameters were subsequently selected by matching the histological images in the particular region. After applying the optimized parameters, more accurate 3D images and more realistic statistical data were obtained. The results demonstrate that the newly established method of adjusting µCT parameters can effectively reduce the influence of metal artifacts on data analysis to some extent. For further validation, other metal materials should be analyzed using the process established in this study.


Assuntos
Osso e Ossos , Titânio , Animais , Coelhos , Microtomografia por Raio-X , Titânio/farmacologia , Próteses e Implantes , Fêmur , Alicerces Teciduais , Porosidade
15.
Acta Biomater ; 149: 387-398, 2022 09 01.
Artigo em Inglês | MEDLINE | ID: mdl-35817341

RESUMO

This study systematically investigated the effect of equal channel angular pressing (ECAP) on the microstructure, mechanical, corrosion, nano-tribological properties and biocompatibility of a newly developed ß Ti-28Nb-35.4Zr (hereafter denoted TNZ) alloy. Results indicated that ECAP of the ß TNZ alloy refined its microstructure by forming ultrafine grains without causing stress-induced phase transformation, leading to formation of a single ß phase. The ECAP-processed TNZ alloy exhibited a compressive yield strength of 960 MPa, and high plastic deformation capacity without fracturing under compression loads. Potentiodynamic polarization tests revealed the higher tendency of ECAP-processed TNZ alloys to form passive oxide films on its surface, which exhibited a lower corrosion rate (0.44±0.07 µm/y) in Hanks' balanced salt solution compared to its as-cast counterpart (0.71±0.10 µm/y). Nanotribological testing also revealed higher resistance of the ECAP-processed TNZ alloy to abrasion, wear and scratching, when compared to its as-cast counterpart. Cytocompatibility and cell adhesion assessments of the ECAP-processed TNZ alloys showed a high viability (111%) of human osteoblast-like SaOS2 cells after 7 d of culturing. Moreover, the ECAP-processed TNZ alloy promoted adhesion and spreading of SaOS2 cells, which exhibited growth and proliferation on alloy surfaces. In summary, significantly enhanced mechanical, corrosion, and biological properties of ECAP-processed TNZ alloy advocate its suitability for load-bearing implant applications. STATEMENT OF SIGNIFICANCE: Equal channel angular pressing (ECAP) provides a unique combination of enhanced mechanical and functional properties of materials by optimizing their microstructures and phase transformations. This study investigated the mechanical, nano-tribological, corrosion, and biocompatibility properties of a newly developed ß Ti-28Nb-35.4Zr (TNZ) alloy processed via ECAP. Our findings indicated that ECAP of the ß TNZ alloy refined its microstructure by forming ultrafine grains without causing stress-induced phase transformation. Compared to its as-cast counterpart, ECAP-processed TNZ exhibited significantly enhanced compressive yield strength, plastic deformation capacity, hardness, wear, and corrosion properties. Moreover, in vitro cytocompatibility and cell adhesion studies revealed high cellular viabilities, growth and proliferation of osteoblast-like SaOS2 cells on the ECAP-processed TNZ alloy.


Assuntos
Ligas , Titânio , Ligas/química , Ligas/farmacologia , Materiais Biocompatíveis/química , Materiais Biocompatíveis/farmacologia , Força Compressiva , Corrosão , Humanos , Teste de Materiais , Plásticos , Titânio/química , Titânio/farmacologia
16.
Acta Biomater ; 146: 506-521, 2022 07 01.
Artigo em Inglês | MEDLINE | ID: mdl-35523413

RESUMO

Zinc (Zn)-based metals and alloys are emerging as promising biodegradable implant materials due to their inherent biodegradability and good biocompatibility. However, this class of materials exhibits low mechanical strength and a slow degradation rate, which hinders their clinical application. Here we report the development of a new biodegradable Fe/Zn-3Cu composite fabricated by infiltration casting of a Zn-3Cu alloy into an Fe foam followed by hot-rolling. Our results indicate that the hot-rolled (HR) Fe/Zn-3Cu composite exhibited an α-Zn matrix phase, a secondary CuZn5 phase, and an α-Fe phase. The HR Fe/Zn-3Cu composite exhibited an ultimate tensile strength of 269 MPa, a tensile yield strength of 210 MPa, and an elongation of 27%. The HR Fe/Zn-3Cu composite showed a degradation rate of 228 µm/year after immersion in Hanks' solution for 30 d The diluted extract of the HR Fe/Zn-3Cu composite exhibited a higher cell viability than that of the HR Zn-3Cu alloy in relation to MC3T3-E1 and MG-63 cells. Furthermore, the HR Fe/Zn-3Cu composite showed significantly better antibacterial ability than that of the HR Zn-3Cu alloy in relation to S. aureus. Overall, the HR Fe/Zn-3Cu composite can be anticipated to be a promising biodegradable implant material for bone-fixation applications. STATEMENT OF SIGNIFICANCE: This work reports a new biodegradable Fe/Zn-3Cu composite fabricated by infiltration casting and followed by hot-rolling for biodegradable bone-fixation application. Our findings demonstrated that the hot-rolled (HR) Fe/Zn-3Cu composite exhibited an ultimate tensile strength of 269.1 MPa, a tensile yield strength of 210.3 MPa, and an elongation of 26.7%. HR Fe/Zn-3Cu composite showed a degradation rate of 227.6 µm/a, higher than HR Zn-3Cu alloy after immersion in Hanks' solution for 30 d The diluted extracts of the HR Fe/Zn-3Cu composite exhibited a higher cell viability than HR Zn-3Cu alloy toward MC3T3-E1 cells. Furthermore, the HR Fe/Zn-3Cu composite showed significantly better antibacterial ability than the HR Zn-3Cu alloy toward S. aureus.


Assuntos
Staphylococcus aureus , Zinco , Implantes Absorvíveis , Ligas/farmacologia , Antibacterianos , Materiais Biocompatíveis , Corrosão , Teste de Materiais , Zinco/farmacologia
17.
Acta Biomater ; 146: 478-494, 2022 07 01.
Artigo em Inglês | MEDLINE | ID: mdl-35580830

RESUMO

Zinc (Zn)-based composites have received extensive attention as promising biodegradable materials due to their unique combination of moderate biodegradability, biocompatibility, and functionality. Nevertheless, the low mechanical strength of as-cast Zn-based composites impedes their practical clinical application. Here we reported the mechanical properties, corrosion behavior, wear properties, and cytotoxicity of in situ synthesized biodegradable Zn-xMg2Ge (x = 1, 3, and 5 wt.%) composites for bone-implant applications. The mechanical properties of Zn-xMg2Ge composites were effectively improved by alloying and hot-rolling due to particle reinforcement of the Mg2Ge intermetallic phase and dynamic recrystallization. The hot-rolled (HR) Zn-3Mg2Ge composite exhibited the best mechanical properties, including a yield strength of 162.3 MPa, an ultimate tensile strength of 264.3 MPa, an elongation of 10.9%, and a Brinell hardness of 83.9 HB. With an increase in Mg2Ge content, the corrosion and degradation rates of the HR Zn-xMg2Ge composites gradually increased, while their wear rate decreased and then increased in Hanks' solution. The diluted extract (12.5% concentration) of the HR Zn-3Mg2Ge composite showed the highest cell viability compared to the other HR composites and their as-cast pure Zn counterparts. Overall, the HR Zn-3Mg2Ge composite can be considered a promising biodegradable Zn-based composite for bone-implant applications. STATEMENT OF SIGNIFICANCE: This paper reports the mechanical properties, corrosion behavior, wear properties, and cytotoxicity of in situ synthesized biodegradable Zn-xMg2Ge (x = 1, 3, and 5 wt.%) composites for bone-implant applications. Our findings demonstrated that the mechanical properties of Zn-xMg2Ge composites were effectively improved by alloying and hot-rolling due to Mg2Ge particle reinforcement and dynamic recrystallization. The hot-rolled Zn-3Mg2Ge composite showed superior cytocompatibility, satisfying corrosion and degradation rates, and the best mechanical properties including a yield strength of 162.3 MPa, an ultimate tensile strength of 264.3 MPa, and an elongation of 10.9%.


Assuntos
Ligas , Zinco , Implantes Absorvíveis , Ligas/química , Ligas/farmacologia , Materiais Biocompatíveis/química , Materiais Biocompatíveis/farmacologia , Corrosão , Teste de Materiais , Próteses e Implantes , Zinco/química , Zinco/farmacologia
18.
Acta Biomater ; 142: 361-373, 2022 04 01.
Artigo em Inglês | MEDLINE | ID: mdl-35189378

RESUMO

Zinc (Zn) and its alloys are currently regarded as one of the promising families of biodegradable metals for implant applications owing to their suitable biodegradability and biofunctionality. However, the inadequate mechanical properties of as-cast (AC) pure Zn restricted the practical clinical bone-implant applications due to its coarse grain size and hexagon close-packed crystal structure. Here, the impact of gadolinium (Gd) on the mechanical properties, corrosion resistance, hemolysis percentage, anticoagulant activity, and cytotoxicity of AC and hot-rolled (HR) Zn-1Mg-xGd (x = 0.1, 0.2, and 0.3) (wt.%) alloys were investigated for biodegradable bone-implant applications. Tensile testing showed that the HR Zn-1Mg-0.3Gd alloy exhibited the highest tensile strength of 288.1 MPa, tensile yield strength of 250.9 MPa, and elongation of 13.2%. Electrochemical corrosion and immersion tests revealed that the corrosion rates of both AC and HR specimens increased with increasing Gd content in Hanks' solution, and the HR Zn-1Mg-xGd specimens exhibited higher corrosion rates compared to their AC counterparts. The HR Zn-1Mg-xGd specimens showed an increasing hemolysis percentages and decreasing activated partial thromboplastin time (APTT) values with increasing Gd addition. The alloy extracts of HR samples at ≤ 25% concentration exhibited no cytotoxicity toward MG-63 cells, and the HR Zn-1Mg-0.3Gd alloy displayed the highest cell viability among all three alloy extracts at 12.5% concentration. Overall, the HR Zn-1Mg-0.3Gd can be considered a promising biodegradable implant material for bone-implant materials owing to its high mechanical strength and ductility, suitable degradation rate, and satisfying biocompatibility. STATEMENT OF SIGNIFICANCE: In this work, Zn-1Mg-xGd (x = 0.1, 0.2, and 0.3 wt.%) alloys were developed by alloying with gadolinium (Gd) and hot-rolling, and their mechanical properties, corrosion behavior, hemolysis percentage, anticoagulant activity, and cytotoxicity were investigated for biodegradable implant application. Our findings demonstrated that the hot-rolled Zn-1Mg-0.3Gd alloy exhibit the highest ultimate tensile strength of 288.1 MPa, yield strength of 250.9 MPa, and elongation of 13.2%. Hot-rolled Zn-1Mg-xGd alloys show slowly increasing hemolysis percentages and decreasing activated partial thromboplastin time (APTT) values with increasing Gd addition. Extracts of hot-rolled Zn-1Mg-xGd alloys at a concentration of ≤ 25% show no cytotoxicity towards MG-63 cells, and Zn-1Mg-0.3Gd exhibit good cytocompatibility among all three alloys at a concentration of 12.5%.


Assuntos
Implantes Absorvíveis , Ligas , Ligas/química , Ligas/farmacologia , Anticoagulantes , Materiais Biocompatíveis/química , Materiais Biocompatíveis/farmacologia , Corrosão , Gadolínio/farmacologia , Hemólise , Humanos , Teste de Materiais , Zinco/química , Zinco/farmacologia
19.
Acta Biomater ; 141: 454-465, 2022 03 15.
Artigo em Inglês | MEDLINE | ID: mdl-34971787

RESUMO

Magnesium (Mg) and some of its alloys are considered promising biodegradable metallic biomaterials for bone implant applications. The osteogenesis effect of Mg alloys is widely reported; however, the underlying mechanisms are still not clear. In this study, pure Mg, Mg-3Zn, and Mg-2Zn-1Mn were prepared, and their degradation behavior, biocompatibility, and osteogenesis effect were systematically assessed both in vitro and in vivo. Primary rat bone marrow-derived mesenchymal stem cells (BMSCs) were used to evaluate the biocompatibility of the prepared Mg alloys, and a rat femur fracture model was used to assess the stimulating effect of these alloys on bone-tissue formation. Mg-2Zn-1Mn showed higher corrosion resistance and more stable degradation behavior than pure Mg and Mg-3Zn. Extracts of the three materials showed significant stimulating effects on osteogenic differentiation of BMSCs along with non-cytotoxicity. Implantation of Mg-2Zn-1Mn wires into the femur of rats demonstrated superior histocompatibility, stable degradation, and notable promotion of osteogenesis without systemic toxicity. Moreover, the results of both in vitro and in vivo assessments demonstrated that bone morphogenetic proteins and fibroblast growth factor receptors are involved in the stimulating effect of Mg alloys. STATEMENT OF SIGNIFICANCE: This work reports the degradation behavior, biocompatibility, and osteogenic effect of pure Mg and Mg-3Zn and Mg-2Zn-1Mn alloys in both in vitro and in vivo conditions. Mg-2Zn-1Mn showed higher corrosion resistance and more stable degradation behavior than pure Mg and Mg-3Zn. The extracts of the three materials showed a significant stimulating effect on osteogenic differentiation of rat bone marrow-derived mesenchymal stem cells (BMSCs) along with non-cytotoxicity. Mg-2Zn-1Mn wires implanted into the femur of rats showed good histocompatibility, stable degradation, and notable promotion of osteogenesis without systemic toxicity. The results of the present study suggest that bone morphogenetic proteins (BMPs) and fibroblast growth factor receptors (FGFRs) are involved in the stimulating effect of Mg alloys on osteogenesis.


Assuntos
Ligas , Magnésio , Ligas/metabolismo , Ligas/farmacologia , Animais , Magnésio/farmacologia , Osteogênese , Ratos , Receptores de Fatores de Crescimento de Fibroblastos
20.
Bioact Mater ; 6(3): 836-879, 2021 Mar.
Artigo em Inglês | MEDLINE | ID: mdl-33024903

RESUMO

Biodegradable metals (BMs) gradually degrade in vivo by releasing corrosion products once exposed to the physiological environment in the body. Complete dissolution of biodegradable implants assists tissue healing, with no implant residues in the surrounding tissues. In recent years, three classes of BMs have been extensively investigated, including magnesium (Mg)-based, iron (Fe)-based, and zinc (Zn)-based BMs. Among these three BMs, Mg-based materials have undergone the most clinical trials. However, Mg-based BMs generally exhibit faster degradation rates, which may not match the healing periods for bone tissue, whereas Fe-based BMs exhibit slower and less complete in vivo degradation. Zn-based BMs are now considered a new class of BMs due to their intermediate degradation rates, which fall between those of Mg-based BMs and Fe-based BMs, thus requiring extensive research to validate their suitability for biomedical applications. In the present study, recent research and development on Zn-based BMs are reviewed in conjunction with discussion of their advantages and limitations in relation to existing BMs. The underlying roles of alloy composition, microstructure, and processing technique on the mechanical and corrosion properties of Zn-based BMs are also discussed.

SELEÇÃO DE REFERÊNCIAS
Detalhe da pesquisa