RESUMO
Photoexcited electron extraction from semiconductors can be useful for converting solar energy into useful forms of energy. Although InP quantum dots (QDs) are considered alternative materials for solar energy conversion, the inherent instability of bare InP QDs demands the use of passivation layers such as ZnS for practical applications, which impedes carrier extraction from the QDs. Here, we demonstrate that Cu-doped InP/ZnS (InP/Cu:ZnS) QDs improve the electron transfer ability due to hole capture by Cu dopants. Steady-state and time-resolved photoluminescence studies confirmed that electrons were effectively transferred from the InP/Cu:ZnS QDs to a benzoquinone acceptor by retarding the electron-hole recombination within the QD. We evaluated the photocatalytic H2 evolution performance of InP/Cu:ZnS QDs under visible light, which showed outstanding photocatalytic H2 evolution activity and stability under visible light illumination. The photocatalytic activity was preserved even in the absence of a cocatalyst.
RESUMO
We report a chemical route to synthesize centimeter-scale stoichiometric "graphenol (C6OH1)", a 2D crystalline alcohol, via vapor phase hydroxylation of epitaxial graphene on Cu(111). Atomic resolution scanning tunneling microscopy revealed this highly-ordered configuration of graphenol and low energy electron diffraction studies on a large-area single crystal graphene film demonstrated the feasibility of the same superstructure being achieved at the centimeter length scale. Periodic density functional theory (DFT) calculations about the formation of C6(OH)1 and its electronic structure are also reported.
RESUMO
A supra-quantum dot (SQD) is a three-dimensionally assembled QD structure composed of several hundreds to thousands of QDs connected through oriented attachments. Owing to their three-dimensional interconnected structures and relatively large volumes, impurity atoms are thermodynamically more stable in SQDs than in conventional QDs. Herein, we report the facile in-situ synthesis of colloidal Ag-doped CdSe SQDs. Ag dopants were efficiently incorporated into CdSe SQDs through the three-dimensional interconnection of Ag-doped primary CdSe QDs, as confirmed by elemental analysis combined with chemical etching. Photoelectron spectroscopic studies revealed that the Ag-doped CdSe SQDs exhibit n-type doping behavior, since the valence electrons from the interstitial Ag atoms are directly donated to the lattice.
RESUMO
An atomically thin two-dimensional (2D) covalent organic framework (COF) was successfully synthesized via the photon-assisted imine condensation reaction within 1 h from the highly uniform and homogeneous precursor solution layer floating on the water surface. The polarity optimization of the precursor solution was the key step for the successful formation of the high-quality 2D COF because only the precursor solution consisting of polarity-controlled solvents allows ideal floating on the water surface. The polarity-controlled solution not only prohibits the agglomeration of the organic precursors on the water surface but also facilitates the wafer scale and layer number-controllable synthesis of the 2D COF. The resulting 2D COF has a uniform porous structure and highly oriented layered structure along the out-of-plane direction as observed by microscopy analysis and X-ray diffraction, respectively. In addition, we successfully fabricated field effect transistor type polyimine-based COF (pi-COF) electronic devices to demonstrate the prompt electrical responses to photo-exposure and water vapor exposure, suggesting the potential applications of the pi-COF in electrical photodetector or moisture-detector devices.
RESUMO
Folded graphene in which two layers are stacked with a twist angle between them has been predicted to exhibit unique electronic, thermal, and magnetic properties. We report the folding of a single crystal monolayer graphene film grown on a Cu(111) substrate by using a tailored substrate having a hydrophobic region and a hydrophilic region. Controlled film delamination from the hydrophilic region was used to prepare macroscopic folded graphene with good uniformity on the millimeter scale. This process was used to create many folded sheets each with a defined twist angle between the two sheets. By identifying the original lattice orientation of the monolayer graphene on Cu foil, or establishing the relation between the fold angle and twist angle, this folding technique allows for the preparation of twisted bilayer graphene films with defined stacking orientations and may also be extended to create folded structures of other two-dimensional nanomaterials.
RESUMO
Large-scale growth of high-quality hexagonal boron nitride has been a challenge in two-dimensional-material-based electronics. Herein, we present wafer-scale and wrinkle-free epitaxial growth of multilayer hexagonal boron nitride on a sapphire substrate by using high-temperature and low-pressure chemical vapor deposition. Microscopic and spectroscopic investigations and theoretical calculations reveal that synthesized hexagonal boron nitride has a single rotational orientation with AA' stacking order. A facile method for transferring hexagonal boron nitride onto other target substrates was developed, which provides the opportunity for using hexagonal boron nitride as a substrate in practical electronic circuits. A graphene field effect transistor fabricated on our hexagonal boron nitride sheets shows clear quantum oscillation and highly improved carrier mobility because the ultraflatness of the hexagonal boron nitride surface can reduce the substrate-induced degradation of the carrier mobility of two-dimensional materials.
RESUMO
A novel type of action spectrum representing multiple overtone excitations of the v(M-C) mode was observed for lateral hopping of a CO molecule on Ag(110) induced by inelastically tunneled electrons from the tip of a scanning tunneling microscope. The yield of CO hopping shows sharp increases at 261±4 mV, corresponding to the C-O internal stretching mode, and at 61±2, 90±2, and 148±7 mV, even in the absence of corresponding fundamental vibrational modes. The mechanism of lateral CO hopping on Ag(110) was explained by the multistep excitation of overtone modes of v(M-C) based on the numerical fitting of the action spectra, the nonlinear dependence of the hopping rate on the tunneling current, and the hopping barrier obtained from thermal diffusion experiments.
RESUMO
Heterostructures of hexagonal boron nitride (h-BN) and graphene have attracted a great deal of attention for potential applications in 2D materials. Although several methods have been developed to produce this material through the partial substitution reaction of graphene, the reverse reaction has not been reported. Though the endothermic nature of this reaction might account for the difficulty and previous absence of such a process, we report herein a new chemical route in which the Pt substrate plays a catalytic role. We propose that this reaction proceeds through h-BN hydrogenation; subsequent graphene growth quickly replaces the initially etched region. Importantly, this conversion reaction enables the controlled formation of patterned in-plane graphene/h-BN heterostructures, without needing the commonly employed protecting mask, simply by using a patterned Pt substrate.
RESUMO
A rich menagerie of structures is identified at 5 K following adsorption of low coverages (≤0.05 monolayers) of S on Cu(111) at room temperature. This paper emphasizes the reconstructions at the steps. The A-type close-packed step has 1 row of S atoms along its lower edge, where S atoms occupy alternating pseudo-fourfold-hollow (p4fh) sites. Additionally, there are 2 rows of S atoms of equal density on the upper edge, bridging a row of extra Cu atoms, together creating an extended chain. The B-type close-packed step exhibits an even more complex reconstruction, in which triangle-shaped groups of Cu atoms shift out of their original sites and form a base for S adsorption at (mostly) 4fh sites. We propose a mechanism by which these triangles could generate Cu-S complexes and short chains like those observed on the terraces.
RESUMO
Using scanning tunneling microscopy, we observe an adlayer structure that is dominated by short rows of S atoms, on unreconstructed regions of a Au(111) surface. This structure forms upon adsorption of low S coverage (less than 0.1 monolayer) on a fully reconstructed clean surface at 300 K, then cooling to 5 K for observation. The rows adopt one of three orientations that are rotated by 30° from the close-packed directions of the Au(111) substrate, and adjacent S atoms in the rows are separated by â3 times the surface lattice constant, a. Monte Carlo simulations are performed on lattice-gas models, derived using a limited cluster expansion based on density functional theory energetics. Models which include long-range pairwise interactions (extending to 5a), plus selected trio interactions, successfully reproduce the linear rows of S atoms at reasonable temperatures.
RESUMO
Graphene functionalization is of great importance in applying graphene as a component in functional devices or in activating it for use as a catalyst. Here we reveal that atomic oxidation of epitaxial graphene grown on a metal substrate results in the formation of enolate, i.e., adsorption of atomic oxygen at the on-top position, on the basal plane of a graphene, using periodic density functional theory calculations. This is striking because the enolate corresponds to the transition state between the epoxides on free-standing graphene and on graphite. Improved interfacial interaction between graphene and the metal substrate during atomic oxidation makes the graphene enolate a local minimum and further highly stabilizes it over the graphene epoxide. Our results provide not only a novel perspective for a chemical route to functionalizing graphene but also a new opportunity to utilize graphene enolate for graphene-based applications.
RESUMO
2D covalent organic frameworks (COFs) are highly porous crystalline materials with promising applications in organic electronics. Current methods involve either on-surface synthesis (solid surface) or interfacial synthesis (liquid/liquid, liquid/gas interface) to create thin films for these applications, each with its drawbacks. On-surface synthesis can lead to contamination from COF powder or unreacted chemicals, while interfacial synthesis risks damaging the film during post-transfer processes. These challenges necessitate the development of alternative synthesis methods for high-quality 2D COF films. This study presents a novel approach for synthesizing homogeneous 2D COF thin films by combining photochemistry and a liquid-flowing system. Leveraging previous work on liquid flow systems to prevent contamination during solvothermal synthesis, this approach to the photochemical method, resulting in the synthesis of high-crystalline 2D COF films with tunable thickness is adopted. The photochemical approach offers spatially controllable energy sources, enabling patternable COF synthesis. Notably, it is successfully fabricated ultrasmooth patterned 2D COF films on hexagonal boron nitride, offering a streamlined process for optoelectronic device fabrication without additional pre, post-processing steps.
RESUMO
A highly reproducible route for the epitaxial growth of single-crystalline monolayer MoS2 on a C-plane sapphire substrate was developed using vapor-pressure-controllable inorganic molecular precursors MoOCl4 and H2S. Microscopic, crystallographic, and spectroscopic analyses indicated that the epitaxial MoS2 film possessed outstanding electrical and optical properties, excellent homogeneity, and orientation selectivity. The systematic investigation of the effect of growth temperature on the crystallographic orientations of MoS2 revealed that the surface termination of the sapphire substrate with respect to the growth temperature determines the crystallographic orientation selectivity of MoS2. Our results suggest that controlling the surface to form a half-Al-terminated surface is a prerequisite for the epitaxial growth of MoS2 on a C-plane sapphire substrate. The insights on the growth mechanism, especially the significance of substrate surface termination, obtained through this study will aid in designing efficient epitaxial growth routes for developing single-crystalline monolayer transition metal dichalcogenides.
RESUMO
Nanogaps between Au nanoparticles and Au substrates are the simplest systems that generate extremely high electric fields at hotspots for surface-enhanced Raman spectroscopy (SERS). However, the electric field cancellation at the hotspots in the systems can cause the reduction of Raman signal when two metallic materials are physically contacted due to the low concentration of analytes. Here, we propose an atomically thin hexagonal boron nitride (h-BN) shielding layer for Au substrates, which can be used as an insulating spacer to prevent electrical shorts at nanogaps. Experimental investigation of the SERS effect combined with theoretical studies by finite-difference time-domain simulations demonstrate that the Au NP/h-BN/Au substrate structure has excellent performance in electrical short prevention, thus facilitating ultrasensitive Raman detection. The outstanding chemical and thermal stability of h-BN allow the efficient recycling of the SERS substrate by protecting the Au surface during the removal of Au NPs and molecular analytes by chemical and thermal processes.
RESUMO
We report facile growth methods for high-quality monolayer and multilayer MoS2 films using MoOCl4 as the vapor-phase molecular Mo precursor. Compared to the conventional covalent solid-type Mo precursors, the growth pressure of MoOCl4 can be precisely controlled. This enables the selection of growth mode by adjusting growth pressure, which facilitates the control of the growth behavior as the growth termination at a monolayer or as the continuous growth to a multilayer. In addition, the use of carbon-free precursors eliminates concerns about carbon contamination in the produced MoS2 films. Systematic studies for unveiling the growth mechanism proved two growth modes, which are predominantly the physisorption and chemisorption of MoOCl4. Consequently, the thickness of MoS2 can be controlled by our method as the application demands.
RESUMO
A single walled carbon nanotube (SWNT) Schottky diode was fabricated via selective electrochemical metal deposition on a prefabricated SWNT field effect transistor device. By electrochemically depositing Pd on only one of the prepatterned Ti electrodes, asymmetric Ohmic (at Pd-SWNT) and Schottky (at SWNT-Ti) contacts were resolved, resulting in efficient current rectification. The selective electrochemical deposition was performed by electrically isolating two Ti electrodes connected through a SWNT by depleting hole carriers in the SWNT upon the simultaneous application of high positive gate voltage during the deposition process. The successful selective deposition of Pd metals was confirmed by X-ray photoelectron spectroscopy.
RESUMO
The site-dependent and spontaneous functionalization of 4-bromobenzene diazonium tetrafluoroborate (4-BBDT) and its doping effect on a mechanically exfoliated graphene (MEG) were investigated. The spatially resolved Raman spectra obtained from both edge and basal region of MEG revealed that 4-BBDT molecules were noncovalently functionalized on the basal region of MEG, while they were covalently bonded to the edge of MEG. The chemical doping effect induced by noncovalently functionalized 4-BBDT molecules on a basal plane region of MEG was successfully explicated by Raman spectroscopy. The position of Fermi level of MEG and the type of doping charge carrier induced by the noncovalently adsorbed 4-BBDT molecules were determined from systematic G band and 2D band changes. The successful spectroscopic elucidation of the different bonding characters of 4-BBDT depending on the site of graphene is beneficial for the fundamental studies about the charge transfer phenomena of graphene as well as for the potential applications, such as electronic devices, hybridized composite structures, etc.
RESUMO
Although surface engineering has been regarded to be a great approach to modulate the optical and electrical properties of nanomaterials, the spontaneous covalent functionalization on semiconducting 2H-MoS2 is a notoriously difficult process, while several reactions have been performed on metallic 1T-MoS2. This limitation in functionalization is attributed to the difficulty of electron transfer from 2H-TMD to the reacting molecules due to its semiconducting property and neutral charge state. Unfortunately, this is an all too important prerequisite step toward creating chemically reactive radical species for surface functionalization reactions. Herein, an electrochemical approach was developed for facilitating direct surface functionalization of 2H-MoS2 with 4-bromobenzene diazonium tetraborate (4-BBDT). Successful functionalization was characterized using various microscopic and spectroscopic analyses. During the course of investigating the change of optical transition seen for modified 2H-MoS2 using photoluminescence measurement combined with theoretical calculations, our study uncovered that the controlling S-C bond and sulfur vacancy generation could tune the electronic structure of functionalized 2H-MoS2.
RESUMO
Fast-growth of single crystal monolayer graphene by CVD using methane and hydrogen has been achieved on "homemade" single crystal Cu/Ni(111) alloy foils over large area. Full coverage was achieved in 5 min or less for a particular range of composition (1.3 at.% to 8.6 at.% Ni), as compared to 60 min for a pure Cu(111) foil under identical growth conditions. These are the bulk atomic percentages of Ni, as a superstructure at the surface of these foils with stoichiometry Cu6Ni1 (for 1.3 to 7.8 bulk at.% Ni in the Cu/Ni(111) foil) was discovered by low energy electron diffraction (LEED). Complete large area monolayer graphene films are either single crystal or close to single crystal, and include folded regions that are essentially parallel and that were likely wrinkles that "fell over" to bind to the surface; these folds are separated by large, wrinkle-free regions. The folds occur due to the buildup of interfacial compressive stress (and its release) during cooling of the foils from 1075 °C to room temperature. The fold heights measured by atomic force microscopy (AFM) and scanning tunneling microscopy (STM) prove them to all be 3 layers thick, and scanning electron microscopy (SEM) imaging shows them to be around 10 to 300 nm wide and separated by roughly 20 µm. These folds are always essentially perpendicular to the steps in this Cu/Ni(111) substrate. Joining of well-aligned graphene islands (in growths that were terminated prior to full film coverage) was investigated with high magnification SEM and aberration-corrected high-resolution transmission electron microscopy (TEM) as well as AFM, STM, and optical microscopy. These methods show that many of the "join regions" have folds, and these arise from interfacial adhesion mechanics (they are due to the buildup of compressive stress during cool-down, but these folds are different than for the continuous graphene films-they occur due to "weak links" in terms of the interface mechanics). Such Cu/Ni(111) alloy foils are promising substrates for the large-scale synthesis of single-crystal graphene film.
RESUMO
Synthesis of morphologically well-defined crystals of metalloporphyrin by direct crystallization based on conventional anti-solvent crystallization method without using any additives has been rarely reported. Herein, we demonstrate an unconventional and additive-free synthetic method named reverse anti-solvent crystallization method to achieve well-defined zinc-porphyrin cube crystals by reversing the order of the addition of solvents. The extended first solvation shell effect mechanism is therefore suggested to support the synthetic process by providing a novel kinetic route for reaching the local supersaturation environment depending on the order of addition of solvents, which turned out to be critical to achieve clean cube morphology of the crystal. We believe that our work not only extends fundamental knowledge about the kinetic process in binary solvent systems, but also enables great opportunities for shape-directing crystallization of various organic and organometallic compounds.