Comparison of the physical, thermal, and biological effects on implant bone site when using either zirconia or stainless-steel drill for implant bone site preparation.

BACKGROUND/PURPOSE: Zirconia has been a popular material in dental implantology with good biocompatibility. But few research focused on its application in implant drills. This study aimed to investigate the physical, thermal, and biological effects on using the zirconia and stainless-steel drills for implant bone site preparation. METHODS: We performed a series of experiments to evaluate the physical wearing properties of zirconia and stainless-steel drills of identical diameter and similar shape. During the implant site preparation thermal test, we subjected both drills onto a resin-embedded bone, utilizing a thermal couple device without irrigation. Moreover, we conducted a cell study by collecting bone cells in vivo while preparing the implant site with both tested drills. The cell activity was evaluated through cell proliferation colorimetric analysis (XTT) and alkaline phosphatase (ALP) activity measurements. RESULTS: The zirconia drill outperforms the stainless-steel drill in terms of requiring less force, maintaining stability over repeated cutting tests, and generating lower temperatures during drilling (stainless-steel drill: 45.48 ± 1.31 °C; zirconia-coated drill: 32.98 ± 1.21 °C, P = 0.000247). Meanwhile, both types of drills show similar results in XTT colorimetric analysis and ALP activity test. CONCLUSION: The thermal effect study is more favorable for using the zirconia drill than the stainless-steel drill for bone preparation. Cytological analysis indicate that the zirconia drill produces a similar impact on bone cells activity as the stainless-steel drill. Therefore, we conclude that the zirconia drills offer a good cutting effect similar to currently available stainless-steel drills in various aspects.

Third-generation sequencing-selected Scardovia wiggsiae promotes periodontitis progression in mice.

BACKGROUNDS: Periodontitis is an oral-bacteria-directed disease that occurs worldwide. Currently, periodontal pathogens are mostly determined using traditional culture techniques, next-generation sequencing, and microbiological screening system. In addition to the well-known and cultivatable periodontal bacteria, we aimed to discover a novel periodontal pathogen by using DNA sequencing and investigate its role in the progression of periodontitis. OBJECTIVE: This study identified pathogens from subgingival dental plaque in patients with periodontitis by using the Oxford Nanopore Technology (ONT) third-generation sequencing system and validated the impact of selected pathogen in periodontitis progression by ligature-implanted mice. METHODS: Twenty-five patients with periodontitis and 25 healthy controls were recruited in this study. Subgingival plaque samples were collected for metagenomic analysis. The ONT third-generation sequencing system was used to confirm the dominant bacteria. A mouse model with ligature implantation and bacterial injection verified the pathogenesis of periodontitis. Neutrophil infiltration and osteoclast activity were evaluated using immunohistochemistry and tartrate-resistant acid phosphatase assays in periodontal tissue. Gingival inflammation was evaluated using pro-inflammatory cytokines in gingival crevicular fluids. Alveolar bone destruction in the mice was evaluated using micro-computed tomography and hematoxylin and eosin staining. RESULTS: Scardovia wiggsiae (S. wiggsiae) was dominant in the subgingival plaque of the patients with periodontitis. S. wiggsiae significantly deteriorated ligature-induced neutrophil infiltration, osteoclast activation, alveolar bone destruction, and the secretion of interleukin-6, monocyte chemoattractant protein-1, and tumor necrosis factor-α in the mouse model. CONCLUSION: Our metagenome results suggested that S. wiggsiae is a dominant flora in patients with periodontitis. In mice, the induction of neutrophil infiltration, proinflammatory cytokine secretion, osteoclast activation, and alveolar bone destruction further verified the pathogenic role of S. wiggsiae in the progress of periodontitis. Future studies investigating the metabolic interactions between S. wiggsiae and other periodontopathic bacteria are warranted.

Mechanical assessment and odontogenic behavior of a 3D-printed mesoporous calcium silicate/calcium sulfate/poly-ε-caprolactone composite scaffold.

BACKGROUND/PURPOSE: Tissue engineering in dentistry has fundamentally changed the way endodontists assess treatment options. Our previous study found that quercetin-contained mesoporous calcium silicate/calcium sulfate (MSCSQ) could induce hard tissue defect region regeneration. This study focused on whether the MSCSQ scaffold could also be effective in regulating odontogenesis and dentin regeneration. METHODS: In this study, we fabricated MSCSQ composite scaffolds using the 3D printing technique. The characteristics of the MSCSQ scaffold were examined by scanning electron microscope (SEM), and mechanical properties were also assessed. In addition, we evaluated the cell viability, cell proliferation, odontogenic-related protein expression, and mineralization behavior of human dental pulp stem cells (hDPSCs) cultured on different scaffolds. RESULTS: We found the precipitation of spherical-apatite on the scaffold surface rapidly in short periods. The in-vitro results for cell behavior revealed that hDPSCs with an MSCSQ scaffold were significantly higher in cell viability as followed time points. In addition, the specific makers of odontogenesis, such as DSPP and DMP-1 proteins, were induced obviously after culturing the hDPSCs on the MSCSQ scaffold. CONCLUSION: Our results demonstrated that MSCSQ scaffolds could enhance physicochemical and biological behaviors compared to mesoporous calcium silicate/calcium sulfate (MSCS) scaffolds. In addition, MSCSQ scaffolds also enhanced odontogenic and immuno-suppressive properties compared to MSCS scaffolds. These results indicated that MSCSQ scaffolds could be considered a potential bioscaffold for clinical applications and dentin regeneration.

Vitamin B12 deficiency and anemia in 140 Taiwanese female lacto-vegetarians.

BACKGROUND/PURPOSE: Lacto-vegetarians (LVs) tend to have vitamin B12 deficiency (B12D). This study assessed whether 140 female LVs, including 16 B12D/LVs and 124 non-B12D/LVs, had significantly higher frequencies of microcytosis, macrocytosis, and of blood hemoglobin (Hb), red blood cell (RBC), and serum vitamin B12 deficiencies than 140 healthy control subjects (HCSs). METHODS: The complete blood count and serum vitamin B12 level in 140 female LVs and 140 female HCSs were measured and compared. RESULTS: We found that 8.6%, 4.3%, 22.9%, 20.0%, and 11.4% of 140 LVs had microcytosis, macrocytosis, and blood Hb, RBC, and serum vitamin B12 deficiencies, respectively. The 140 LVs, 16 B12D/LVs, and 124 non-B12D/LVs had significantly higher frequencies of microcytosis as well as blood Hb and RBC deficiencies than 140 HCSs (all P-values < 0.005). Moreover, both 140 LVs and 124 non-B12D/LVs had significantly higher frequencies of macrocytosis than 140 HCSs. In this study, 32 (22.9%) of 140 LVs including 5 B12D/LVs and 27 non-B12D/LVs had anemia. Of the 5 anemic B12D/LVs, three had normocytic anemia, one had iron deficiency anemia (IDA), and one had thalassemia trait-induced anemia. Moreover, of the 27 anemic non-B12D/LVs, 18 had normocytic anemia, one had IDA, one had thalassemia trait-induced anemia, and 7 had microcytic anemia other than IDA and thalassemia trait-induced anemia. CONCLUSION: LVs have significantly higher frequencies of microcytosis, macrocytosis, blood Hb, RBC, and serum vitamin B12 deficiencies than HCSs. Normocytic and microcytic anemias are the two most common types of anemia in our LVs.

The synergistic effects of quercetin-containing 3D-printed mesoporous calcium silicate/calcium sulfate/poly-ε-caprolactone scaffolds for the promotion of osteogenesis in mesenchymal stem cells.

BACKGROUND/PURPOSE: Several growth factors were proven to be effective in the treatment of bone defects and fractures and thus have great potential for bone regeneration applications. However, it needs low-temperature storage and transportation. This study aimed to investigate the herbal extract quercetin, a candidate for natural flavonoid compounds that have been reported to be involved in regulating inflammation and improving immunity and health. METHODS: In this study, we prepared quercetin (Q)/mesoporous calcium silicate calcium sulfate (MSCS)/polycaprolactone (PCL) composite scaffolds using the 3D printing technique, where we immersed it in simulated body fluid (SBF) solution and soaked it for up to 60 days. The characteristics of quercetin scaffold were examined by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), immunofluorescence, and Alizarin Red S staining. RESULTS: We found precipitation of apatite on the surface of the scaffold. The in vitro results for cell proliferation, cytotoxicity, and immunofluorescence staining revealed that Wharton's jelly mesenchymal stem cells (WJMSCs) with a 2% quercetin (Q2) scaffold were significantly higher in number than with 1% quercetin (Q1) and MSCS scaffolds. The phalloidin staining of cell skeletons on the surface of Q2 revealed powerful cell-to-cell adhesion and high expression of green fluorescence. The Q2 scaffold also had the highest calcium deposit levels based on Alizarin Red S staining in all scaffolds. This indicated that quercetin was able to induce cell growth and mitosis, echoing the previous preliminary results. CONCLUSION: Our initial results indicate that this natural herbal extract can be a good bone-based gene substitution for bone regeneration.

Comparing image qualities of dental cone-beam computed tomography with different scanning parameters for detecting root canals.

BACKGROUND/PURPOSE: Cone-beam computed tomography (CBCT) is a useful device in creating 3-dimensional images in the examining area of dentistry and is one of the most common clinical methods in detecting second mesiobuccal (MB2) canals in maxillary molars. The aim of this in vitro study was to compare the image quality of the small field of view (FOV) CBCT with different rotation arcs and scanning speeds in the use of detecting root canals. METHODS: A dentate human skull was scanned in Morita 3D Accuitomo 170 with 4 × 4 cm FOV under 5 mA and 90 kVp. Two different rotation arcs (360° and 180°) and three different scanning modes (slow-speed mode, standard mode and high-speed mode) combined into six different groups. Five different levels of axial sections were selected from each group. Five endodontic specialists rated the image quality by focusing on the sharpness of the MB2 canal of the upper right first molar and the surrounding structures. RESULTS: Despite the rotation arcs, all the observers gave excellent ratings to images taken with slow-speed mode. The high-speed mode taken with 360° and 180° got the second lowest and the lowest ratings, respectively. Under the same scanning speed, the rotation arc did not have a significant difference in image quality. CONCLUSION: Slow-speed mode is inevitable in maintaining adequate image quality during taking CBCT. However, endodontists can use the half rotation mode to significantly reduce radiation dose, exposure time, and still maintain sufficient image quality for root canal anatomy assessment.

Nitrogen-Doped Titanium Dioxide Mixed with Calcium Peroxide and Methylcellulose for Dental Bleaching under Visible Light Activation.

The available tooth whitening products in the market contain high concentrations of hydrogen peroxide (H2O2) as an active ingredient. Therefore, in order to curb the high H2O2 concentration and instability of liquid H2O2, this study evaluated the efficacy and cytotoxicity of the bleaching gel composed of 10% calcium peroxide (CaO2) and visible-light-activating nitrogen-doped titanium dioxide (N-TiO2) with methyl cellulose as a thickener. Extracted bovine teeth were discolored using coffee and black tea stain solution and were divided into two groups (n = 6). Bleaching was performed thrice on each tooth specimen in both the groups, with one minute of visible light irradiation during each bleaching time. The CIELAB L*a*b* values were measured pre- and post-bleaching. The N-TiO2 calcinated at 350 °C demonstrated a shift towards the visible light region by narrowing the band gap energy from 3.23 eV to 2.85 eV. The brightness (ΔL) and color difference (ΔE) increased as bleaching progressed each time in both the groups. ANOVA results showed that the number of bleaching significantly affected ΔE (p < 0.05). The formulated bleaching gel exhibits good biocompatibility and non-toxicity upon exposure to 3T3 cells. Our findings showed that CaO2-based bleaching gel at neutral pH could be a stable, safe, and effective substitute for tooth whitening products currently available in the market.

Crystal growth in dentinal tubules with bio-calcium carbonate-silica sourced from equisetum grass.

BACKGROUND/PURPOSE: One effective way to deal with dentin hypersensitivity is to develop materials to seal the tubules. The porous bio-calcium carbonate-silica (BCCS) contained well-dispersed CaCO3 would form calcium phosphates to seal the dentinal tubules when mixed with an acidic solution. The acidic hydrothermal treatment and calcination to isolate the BCCS from the agricultural waste like equisetum grass was used, which would be more environmentally friendly than chemically synthesized mesoporous biomaterials. The aim of this study was to develop mesoporous materials from natural resources to occlude the dentinal tubules which could be more environmentally-friendly. METHODS: Dentin disc samples were prepared and treated with different methods as follows: (1) BCCS mixed with H3PO4; (2) BCCS mixed with KH2PO4; (3) Seal & Protect® was used as a comparison group. Sealing efficacy was evaluated by measuring the depths and percentages of precipitate occlusion in dentinal tubules with SEM. RESULTS: The N2 adsorption-desorption isotherm of the BCCS demonstrated a pore size of around 15.0 nm and a surface area of 61 m2g-1. From the results of occlusion percentage and depth, the BCCS treated with H3PO4 or KH2PO4 demonstrated promising sealing efficacy than the commercial product. CONCLUSION: This synthetic process used the agricultural waste equisetum grass to produce bio-calcium carbonate-silica would be environmentally friendly, which has great potential in treating exposed dentin related diseases.

Characterization of Phosphorus Species in Human Dentin by Solid-State NMR.

The rat has been considered as an appropriate animal model for the study of the mineralization process in humans. In this work, we found that the phosphorus species in human dentin characterized by solid-state NMR spectroscopy consist mainly of orthophosphate and hydrogen phosphate. Some orthophosphates are found in a disordered phase, where the phosphate ions are hydrogen-bonded to structural water, some present a stoichiometric apatite structure, and some a hydroxyl-depleted apatite structure. The results of this study are largely the same as those previously obtained for rat dentin. However, the relative amounts of the various phosphorus species in human and rat dentin are dramatically different. In particular, stoichiometric apatite is more abundant in human dentin than in rat dentin, whereas the converse is true for disordered-phase orthophosphates. Furthermore, spatial proximity among all phosphorus species in human dentin is identical within experimental error, in contrast to what observed for rat dentin. Although it is not clear how these spectroscopic data could relate to the hierarchical structure or the mechanical properties of teeth, our data reveal that the molecular structures of human and rat dentin at different growth stages are not exactly the same.

Strontium ion can significantly decrease enamel demineralization and prevent the enamel surface hardness loss in acidic environment.

BACKGROUND/PURPOSE: Strontium ion may play a role similar to calcium ion in enamel remineralization. The aim of this study was to investigate the effect of strontium ion concentration gradient on the demineralization of enamel. METHODS: Citric acid and sodium citrate were used to prepare 16 different experimental acidic solutions with four different pH values (2.5, 3.5, 4.5, and 5.5) and four different strontium ion concentrations (0 M, 10-4 M, 10-3 M, and 10-2 M). Forty-eight human enamel samples were divided into 16 groups (n = 3) and immersed into the 16 different acidic solutions for 3 min. The phosphorus ion concentrations in 16 different acidic solutions were measured and compared. The enamel surface hardness was measured with a Vickers hardness tester. The energy dispersive spectrometer was used to detect the strontium ion content in the enamel surface. RESULTS: Addition the strontium ions to the acidic solution could reduce the dissolution of the enamel. At pH 3.5 and pH 5.5, significantly lower phosphorus ion concentrations were detected in the acidic solutions with the addition of 10-2 M strontium ions. There was a less reduction of enamel surface hardness, while the strontium ion concentration increased in the acidic solution. At pH 2.5, the addition of 10-4 M, 10-3 M, or 10-2 M strontium ions to the acidic solution resulted in a significant increase in the strontium ion content in the enamel surface. CONCLUSION: Strontium ion can decrease the dissolution of the enamel and prevent the enamel surface hardness loss in acidic environment.

The dentin permeability of anti-inflammatory and antibacterial drugs: In vitro study.

BACKGROUND/PURPOSE: Stimuli from the oral cavity may penetrate through exposed dentinal tubules and evoke inflammatory pulp response. Anti-bacterial and anti-inflammatory drugs applied to exposed dentin may infiltrate through the dentinal tubules and cause pulp recovery. This study investigated the dentin permeability of anti-bacterial and anti-inflammation drugs via an in-vitro transwell dentin disc tube model. METHODS: Twenty-seven dentin discs prepared from extracted human molars were collected. Nine kinds of drugs were investigated with three dentin discs in each group. These nine drugs included two anti-bacterial drugs (ampicillin sodium and clindamycin phosphate), two corticosteroids (betamethasone sodium phosphate and hydrocortisone sodium succinate), three non-steroidal anti-inflammatory drugs (NSAIDs, piroxicam, lysine acetylsalicylate, and diclofenac sodium), and two natural extracts with anti-inflammatory effect (Ginsenoside Rg1 and Hinokitol). The drugs were introduced to the transwell dentin disc tube model and the 4-hour cumulative release of the drug was detected and recorded by UV-visible spectroscopy. RESULTS: We found that ampicilin sodium had better dentin permeability than clindamycin phosphate. Betamethasone sodium phosphate revealed better dentin permeability than hydrocortisone sodium succinate. Lysine acetylsalicylate showed the best dentin permeability among the three NSAIDs. Ginsenoside Rg1 had the best dentin permeability among the nine drugs tested. However, Hinokitiol could not penetrate the dentin disc after 4 h. CONCLUSION: Regarding the dentin permeability, Ginsenoside Rg1 is the best among the seven anti-inflammatory drugs tested and ampicilin sodium is the better one between the two anti-bacterial drugs tested. Therefore, these two drugs may have high potential for treating exposed dentinal tubule diseases.

Pure type-1 collagen application to third molar extraction socket reduces postoperative pain score and duration and promotes socket bone healing.

BACKGROUND/PURPOSE: Extraction of the third molar may cause post-operative complications. This study assessed whether application of pure type-1 collagen to the third molar extraction socket can reduce post-operative pain score and duration and promote socket bone healing. METHODS: Fourteen patients who underwent 20 bilateral and symmetric third molar extractions were included in this study. After two tooth extractions at two different occasions in the same patient, one socket was filled with pure type-1 collagen (experimental group, n = 20) and the other socket received nothing but the blood clot (control group, n = 20). The post-operative pain score and duration, mouth-opening limitation, and the bone density at the socket site were assessed at weeks 1, 2, 4, and 8 after tooth extraction. RESULTS: Patients in the experimental group had a significantly lower mean post-operative pain score (2.6 ± 1.2) than patients in the control group (4.7 ± 2.0), and had a significantly shorter post-operative pain duration (2.7 ± 1.4 days) than patients in the control group (3.7 ± 1.8 days). We also observed a significantly lower frequency of mouth-opening limitation in 20 experimental-group patients (45%) than in 20 control-group patients (90%, P = 0.007). Moreover, a significantly higher mineralization ratio (10.2%) was found in the experimental socket site than in the control socket site. CONCLUSION: Application of pure type-1 collagen to the third molar extraction socket can reduce post-operative pain score and duration, decrease the frequency of mouth-opening limitation, and increase mineralization ratio at the extraction socket site.

Effect of different zinc concentrations on partially-stabilized cement for vital pulp therapy.

BACKGROUND/PURPOSE: We have developed and investigated the partially-stabilized cements (PSC) with Zn for vital pulp therapy due to their short setting time and high cell biocompatibility. However, the effect of PSC with different concentrations of Zn on setting time and biocompatibility remained unknown. Therefore, the purpose of this study was to determine the optimal concentration of Zn to be synthesized with PSC for vital pulp therapy. METHODS: PSC with different weight percentages of Zn (5%, 7%, 10%) were synthesized to attain 5%Zn-PSC, 7%Zn-PSC, and 10%Zn-PSC. The initial and final setting times were measured using the Gillmore needles method, and the compressive strength tests were conducted using a universal testing machine. The phases of Zn-PSC powders were observed using an X-ray diffractometer (XRD). Human dental pulp stem cells (hDPSCs) were used to evaluate the biocompatibility and cytotoxicity of the materials via Alamar blue and LDH assays. Mineral trioxide aggregate (MTA) was used to be compared with Zn-PSC samples. RESULTS: The initial and final setting times of PSC with different concentrations of Zn were reduced considerably compared to those of MTA. The results also indicated that the initial and final setting times decreased as the weight % of Zn increased. 5%Zn-PSC had the highest compressive strength among all tested materials. 5%Zn-PSC samples also displayed comparatively higher cell biocompatibility than 7% and 10% Zn-PSC samples. However, there was no significant difference between the 5%Zn-PSC and MTA in cell biocompatibility. In addition, the results of the LDH release assay indicated a low level of cytotoxicity among all the test samples. CONCLUSION: 5%Zn-PSC has a shorter setting time, better mechanical properties, and good biocompatibility and thus it has great potential for vital pulp therapy.

Effects of bone morphogenic protein-2 loaded on the 3D-printed MesoCS scaffolds.

BACKGROUND/PURPOSE: The mesoporous calcium silicate (MesoCS) 3D-printed scaffold show excellent bioactivity and can enhance the bone-like apatite formation. The purpose of this study aims to consider the effects of the different loading methods on the novel grafting materials which composed of bone morphogenetic protein-2 (BMP-2) loaded MesoCS scaffold by employing 3D-printing technique. METHODS: The MesoCS scaffold were fabricated by fused deposition modeling. In this study, there are two methods of loading BMP-2: (1) the pre-loading (PL) method by mixing MesoCS and BMP-2 as a raw material for a 3D-printer, and (2) the direct-loading (DL) method by soaking the 3D-printed MesoCS scaffold in a BMP-2 solution. The characteristics of MesoCS scaffold were examined by transmission electron microscopy (TEM), X-ray diffraction (XRD) and scanning electron microscopy (SEM). Their physical properties, biocompatibility, and osteogenic-related ability were also evaluated. RESULTS: The 3D MesoCS/PCL scaffolds showed excellent biocompatibility and physical properties. After soaking in simulated body fluid, the bone-like apatite layer of the PL and DL groups could be formed. In addition, the DL group released fifty percent more than the PL group at the end of the first day and PL showed a sustained release profile after 2 weeks. CONCLUSION: The 3D MesoCS/PCL porous scaffolds were successfully fabricated via a 3D printing system and were tested in vitro and were found to show good cellular activity for cell behavior although the PL method was not favorable for clinical application in relation with the preservation of BMP-2. With regards to different growth factor loading methods, this study demonstrated that PL of BMP-2 into MesoCS prior to printing will result in a more sustained drug release pattern as compared to traditional methods of scaffolds directly immersed with BMP-2.

Effects of fluoride and epigallocatechin gallate on soft-drink-induced dental erosion of enamel and root dentin.

BACKGROUND/PURPOSE: Fluoride and epigallocatechin gallate (EGCG) have been proven to prevent dental caries. The purpose of this study was to evaluate the effects of fluoride and EGCG on soft-drink-induced dental erosion in vitro. METHODS: Forty enamel and dentin specimens were prepared from extracted human teeth. The specimens were divided into 4 groups and treated separately with distilled water (as control), 0.5 M sodium fluoride (NF), 400 µM EGCG (EG), and a solution containing 0.5 M NaF and 400 µM EGCG (FG). Cyclic erosive treatment was performed according to the experimental procedures. The specimens were analyzed using laser scanning confocal microscopy, scanning electron microscopy, and a microhardness tester. The data were analyzed using ANOVA and Bonferroni's post hoc test. The significance level was set at 5%. RESULTS: The amount of substance loss was lower in the NF and EG groups than in the control group (p < 0.05). The erosion-caused substance loss was more pronounced in the dentin than in the enamel specimens. Surface microhardness loss was lower in the NF and EG groups than in the control group (p < 0.05). The diameter of the dentinal tubule was wider in the control group than in the NF and EG groups (p < 0.05). No combined effects were observed in the FG group. CONCLUSION: Both fluoride and EGCG are effective in preventing soft-drink-induced erosion compared with the control group. Fluoride and EGCG may interfere with each other. The mechanisms of the anti-erosive effect need to be explored in the future.

Cyclic fatigue behavior of nickel-titanium dental rotary files in clinical simulated root canals.

BACKGROUND/PURPOSE: Dental rotary instruments can be applied in multiple conditions of canals, but unpredictable fatigue fracture may happen. This study evaluated the fatigue lives of two batches of nickel-titanium (NiTi) dental rotary files operating in clinically simulated root canals. METHODS: Single-step cyclic fatigue tests were carried out to assess the performance of two batches of NiTi files (ProTaper and ProFile) in nine combinations of simulated canals (cylinder radii 5 mm, 7.5 mm, and 10 mm, and insertion angles 20°, 40°, and 60°). Two-step cyclic fatigue tests were carried out in simulated root canals with the same radius by using the following two sets of insertion angles: (20°, 40°), (20°, 60°), (40°, 20°), and (60°, 20°). Fracture surfaces were observed by scanning electron microscopy. RESULTS: The single-step cyclic fatigue results showed that cyclic fatigue lives of the files decreased with increasing insertion angles or decreasing cylinder radius. The ProFile #25 .04 file was more fatigue resistant than the ProTaper F2 file. In two-step cyclic fatigue tests, the total fatigue lives were usually more than 100% when the files operated at a lower strain and then at a higher strain. By scanning electron microscopy, a larger area of fatigue striation corresponded to a longer fatigue life. CONCLUSION: Cyclic fatigue life can be influenced by the strains and geometries of files. The fatigue life was prolonged when the files operated at a lower strain and then at a higher strain. However, the fatigue life was shortened if the loading sequence was reversed.

Hydration behaviors of calcium silicate-based biomaterials.

BACKGROUND/PURPOSE: Calcium silicate (CS)-based biomaterials, such as mineral trioxide aggregate (MTA), have become the most popular and convincing material used in restorative endodontic treatments. However, the commercially available CS-based biomaterials all contain different minor additives, which may affect their hydration behaviors and material properties. The purpose of this study was to evaluate the hydration behavior of CS-based biomaterials with/without minor additives. METHODS: A novel CS-based biomaterial with a simplified composition, without mineral oxides as minor additives, was produced. The characteristics of this biomaterial during hydration were investigated using scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared (FTIR) spectrometry. The hydration behaviors of commercially available gray and white MTAs with mineral oxide as minor additives were also evaluated for reference. RESULTS: For all three test materials, the XRD analysis revealed similar diffraction patterns after hydration, but MTAs presented a significant decrease in the intensities of Bi2O3-related peaks. SEM results demonstrated similar porous microstructures with some hexagonal and facetted crystals on the outer surfaces. In addition, compared to CS with a simplified composition, the FTIR plot indicated that hydrated MTAs with mineral oxides were better for the polymerization of calcium silicate hydrate (CSH), presenting Si-O band shifting to higher wave numbers, and contained more water crystals within CSH, presenting sharper bands for O-H bending. CONCLUSION: Mineral oxides might not result in significant changes in the crystal phases or microstructures during the hydration of CS-based biomaterials, but these compounds affected the hydration behavior at the molecular level.

Fracture resistance of dental nickel-titanium rotary instruments with novel surface treatment: Thin film metallic glass coating.

BACKGROUND/PURPOSE: Dental nickel-titanium (NiTi) rotary instruments are widely used in endodontic therapy because they are efficient with a higher success rate. However, an unpredictable fracture of instruments may happen due to the surface characteristics of imperfection (or irregularity). This study assessed whether a novel surface treatment could increase fatigue fracture resistance of dental NiTi rotary instruments. METHODS: A 200- or 500-nm thick Ti-zirconium-boron (Ti-Zr-B) thin film metallic glass was deposited on ProTaper Universal F2 files using a physical vapor deposition process. The characteristics of coating were analyzed by scanning electron microscopy, transmission electron microscopy, and X-ray diffractometry. In cyclic fatigue tests, the files were performed in a simulated root canal (radius=5 mm, angulation=60°) under a rotating speed of 300rpm. The fatigue fractured cross sections of the files were analyzed with their fractographic performances through scanning electron microscopy images. RESULTS: The amorphous structure of the Ti-Zr-B coating was confirmed by transmission electron microscopy and X-ray diffractometry. The surface of treated files presented smooth morphologies without grinding irregularity. For the 200- and 500-nm surface treatment groups, the coated files exhibited higher resistance of cyclic fatigue than untreated files. In fractographic analysis, treated files showed significantly larger crack-initiation zone; however, no significant differences in the areas of fatigue propagation and catastrophic fracture were found compared to untreated files. CONCLUSION: The novel surface treatment of Ti-Zr-B thin film metallic glass on dental NiTi rotary files can effectively improve the fatigue fracture resistance by offering a smooth coated surface with amorphous microstructure.

Dental service use among patients with specific disabilities: A nationwide population-based study.

BACKGROUND/PURPOSE: The Taiwan National Health Insurance program has allocated a specific fund for dental services to patients with specific disabilities (PSDs); however, the trends and the quality are unknown. In this study, we conducted quantity analyses and quality assessments of dental service use among PSDs using a nationwide population-based database. METHODS: PSDs were identified according to the codes of diagnosis fee. Quantity analyses included the number of patients receiving dental services, the number of visits, and the percentages of categories of dental service use. Quality assessments included refilling rates for operative dental treatments and unfinished rates for endodontic therapies. RESULTS: For quantity analyses, dental services were accessible to 3-4% of patients with disabilities and were mostly provided to younger PSDs. The general population received more operative and endodontic therapies, and PSDs received more periodontal therapies. For quality assessments, the teeth of PSDs had a 9.74-15.07% refilling rate, which was higher than that of the general population (1.39-6.37%). Furthermore, the teeth of PSDs had a 32.03% unfinished endodontic rate, which was higher than that of the general population (21.42%). CONCLUSION: During 2010-2012, only 3-4% of patients with disabilities had access to dental services, mostly provided to younger PSDs. Teeth of PSDs had higher refilling rates and unfinished endodontic sessions than the general population. We suggest that a more comprehensive dental care system is necessary to improve the quantity and quality of dental services, especially in middle-aged and older PSDs.

A mesoporous biomaterial for biomimetic crystallization in dentinal tubules without impairing the bonding of a self-etch resin to dentin.

BACKGROUND/PURPOSE: CaCO3@mesoporous silica reacted with phosphoric acid (denoted as CCMS-HP) enables the growth of calcium phosphate crystals in dentinal tubules. This study tested whether CCMS-HP could be used to form a biomimetic barrier on the exposed dentin for prevention of dentin sensitivity without impairing the bonding of Single Bond Universal (SBU) self-etch adhesive to the dentin. METHODS: Twenty-four dentin disks were prepared and divided into three groups: (1) SBU group (n = 8), in which SBU self-etch adhesive was bonded to the dentin disk directly; (2) CCMS-HP group (n = 8), in which CCMS-HP was applied onto the dentin surface; and (3) CCMS-HP/SBU group (n = 8), in which the dentin surface was first treated with CCMS-HP and then boned by SBU. The permeation depth of crystals into the dentinal tubules was examined and measured with a scanning electron microscope. The shear bonding strength of SBU and CCMS-HP/SBU to dentin was also measured. RESULTS: The mean crystal permeation depth was 35.8 ± 6.9 µm for the CCMS-HP/SBU group and 33.6 ± 12.2 µm for the CCMS-HP group; no significant difference was found between the two groups. Moreover, the mean shear bonding strength was 22.7 ± 6.7 MPa for the CCMS-HP/SBU group and 23.3 ± 7.0 MPa for the SBU group. There was also no significant difference between the two groups. CONCLUSION: CCMS-HP can be used to form a biomimetic barrier for prevention of dentin sensitivity because it neither impedes the bonding of SBU to dentin nor impairs the shear bonding strength between the SBU and dentin.