The emissions from co-firing of biomass and torrefied biomass with coal in a chain-grate steam boiler.

In this study, biomass of rice straw (RS) and wood (WD) and their torrefied biomass (RST and WDT) were used as solid biofuel (SBF) for co-firing individually with coal in a commercial continuous chain-grate steam boiler system, which was conducted at fixed input rate of heating value of mixture of SBF and coal and at fixed airflow rate. The effects of key system parameters on the gaseous and particulate pollutions and ash were examined. These include SBF type and blending ratio (RBL) of biomass (i.e., SBF) in the mixture of coal and biomass based on heating values for co-firing.The results indicated that wood, which possesses high heating value while less amount of ash, is more suitable for co-firing with coal than rice straw. Torrefaction can increase the heating value of biomass and homogenize its property, being beneficial to co-firing. Also, torrefaction can decompose the hydroxyl group of biomass, which makes biomass tending to possess hydrophobicity. This, in turn, helps the storage and transportation of biomass. Generally, adding the RS (with RBL = 5-10%), WD (2-15%), RST (2-10%) and WDT (2-20%), respectively, with coal decreases the emissions of NOx and SO2, but increases that of CO (except RST). The emission of HCl is little. The addition of biomass also increases the emission of fine particulate matters (PM) especially PM2.5 in the flue gases, raising PM2.5/PM100 from 34.87 to 78.35 wt.% (Case 50%WDT). These emissions for the Cases tested satisfy with Taiwanese emission standards of stationary sources which set limitations of NOx, SO2, CO and HCl < 350, 300, 2000 and 80 ppmv, while PM < 50 mg/m3, respectively. The results support the use of RS, WD, RST and WDT for co-firing with coal.Implications: This study examined the suitability of using solid bio-fuels to co-fire with coal in an industrial chain-grate steam boiler system with a capacity of 100 kW, in order to achieve carbon-free emissions. Both biomass and torrefied biomass of solid bio-fuel were tested. The findings would be useful for proper design and rational operation of solid bio-fuel/coal co-firing combustion matching the appeal of sustainable material management and circular economy of biomass, and of adaptation of global warming induced by greenhouse gases. It also provides information for policy-makers to promote the co-firing application of biomass and related bio-waste materials.

InN nanorods prepared with CrN nanoislands by plasma-assisted molecular beam epitaxy.

The authors report the influence of CrN nanoisland inserted on growth of baseball-bat InN nanorods by plasma-assisted molecular beam epitaxy under In-rich conditions. By inserting CrN nanoislands between AlN nucleation layer and the Si (111) substrate, it was found that we could reduce strain form Si by inserting CrN nanoisland, FWHM of the x-ray rocking curve measured from InN nanorods from 3,299 reduced to 2,115 arcsec. It is due to the larger strain from lattice miss-match of the film-like InN structure; however, the strain from lattice miss-match was obvious reduced owing to CrN nanoisland inserted. The TEM images confirmed the CrN structures and In droplets dissociation from InN, by these results, we can speculate the growth mechanism of baseball-bat-like InN nanorods.