Heparin-free after 3000 IU heparin loaded in veno-venous ECMO supported acute respiratory failure patients with hemorrhage risk: a novel anti-coagulation strategy.

BACKGROUND: The anti-coagulation protocol of patients with hemorrhage risk primary disease who need extracorporeal membrane oxygenation (ECMO) supported is controversial. This study evaluated the feasibility of a new anti-coagulation strategy, that is heparin-free after 3000 IU heparin loaded in veno-venous ECMO (VV ECMO) supported acute respiratory failure patients with hemorrhage risk. METHODS: A retrospective study was performed in a series of hemorrhage risk patients supported with VV ECMO at the First Affiliated Hospital of Zhengzhou University, between June 2012 to Sept 2020. A total of 70 patients received a low heparin bolus of 3000 units for cannulation but without subsequent, ongoing heparin administration. Patients were divided into survival (n = 25) and non-survival group (n = 45). Data of coagulation, hemolysis and membrane lung function were calculated and analyzed. The complications of patients were recorded. Finally, the binary Logistic regression was conducted. RESULTS: The longest heparin-free time was 216 h, and the mean heparin-free time was 102 h. Compared with survivors, the non-survivors were showed higher baseline SOFA score and lower platelet counts in 0.5 h, 24 h, 48 h and 96 h after ECMO applied. However, there was no significant differences between survivors and non-survivors in ACT, APTT, INR, D-dimer, fibrinogen, LDH, blood flow rate, Δp and Ppost-MLO2 (all p < 0.05) of all different time point. Moreover, only the baseline SOFA score was significantly associated with mortality (p < 0.001, OR(95%CI): 2.754 (1.486-5.103)) while the baseline levels of ACT, APTT, INR, platelet, D-dimer, fibrinogen and LDH have no association with mortality. The percentage of thrombosis complications was 54.3% (38/70) including 3 oxygenator changed but there was no significant difference of complications in survival and non-survival groups (p > 0.05). CONCLUSIONS: The anticoagulation protocol that no heparin after a 3000 units heparin bolus in VV ECMO supported acute respiratory failure patients with hemorrhage risk is feasible.

Pembrolizumab with or without enzalutamide in selected populations of men with previously untreated metastatic castration-resistant prostate cancer harbouring programmed cell death ligand-1 staining: a retrospective study.

BACKGROUND: The purpose of this retrospective study was to evaluate the survival outcomes of pembrolizumab (PEM) plus enzalutamide (ENZ) versus PEM alone in selected populations of men with previously untreated metastatic castration-resistant prostate cancer (mCRPC) harbouring programmed cell death ligand-1 (PD-L1) staining. METHODS: Consecutive men with previously untreated mCRPC harbouring PD-L1 staining who underwent treatment with PEM plus ENZ (PE) or PEM alone (PA) at our medical centre from January 1, 2017, to January 31, 2021, were retrospectively identified. Follow-up was conducted monthly during the first year and then every 1 month thereafter. The primary outcomes of the study were overall survival (OS) and progression-free survival (PFS). Secondary outcomes were the frequency of key adverse events (AEs). RESULTS: In total, 302 men were retrospectively reviewed, 96 of whom were deemed to be ineligible per the exclusion criteria, leaving 206 men (PE: n = 100, median age 64 years [range, 43-85] and PA: n = 106, 65 years [range, 45-82]) who were eligible for the study. The median follow-up for both groups was 34 months (range, 2-42). At the final follow-up, the median OS was 25.1 months (95% confidence interval [CI], 22.3-27.6) in the PE group versus 18.3 months (95% CI, 16.5-20.9) in the PA group (hazard ratio [HR] 0.56; 95% CI, 0.39-0.80; p = 0.001). A marked distinction was also observed in the median PFS (6.1 months [95% CI, 4.7-7.8] for PE vs. 4.9 months for PA (95% CI, 3.2-6.4) for PA; HR 0.55, 95% CI, 0.41-0.75; p = 0.001). There were noteworthy differences in the rate of the key AEs between the two groups (72.0% for PE vs. 45.3% for PA, p < 0.001). Noteworthy differences were also detected for fatigue events (7.0% in the PE group vs. 0.9% in the PA group, p = 0.025) and musculoskeletal events (9.0% for PE vs. 0.9% for PA, p = 0.007), but these events tended to be manageable. CONCLUSIONS: Among selected populations of men with previously untreated mCRPC harbouring PD-L1 staining, PEM added to ENZ treatment may significantly increase the survival benefits compared with PEM treatment alone regardless of tumor mutation status. The safety profile for PE plus ENZ tends to be manageable.

High-dose versus low-dose iron sucrose in individuals undergoing maintenance haemodialysis: a retrospective study.

BACKGROUND: Intravenous iron sucrose is becoming a prevailing treatment for individuals undergoing maintenance haemodialysis, but comparisons of dosing regimens are lacking. The aim of this retrospective review was to evaluate the safety and efficacy of proactively administered high-dose iron sucrose versus reactively administered low-dose iron sucrose in patients undergoing maintenance haemodialysis. METHODS: We analysed the data of 1500 individuals with maintenance haemodialysis who were treated with either high-dose iron sucrose that was proactively administered (Group HD) or low-dose iron sucrose that was reactively administered (Group LD) at the First Affiliated Hospital of Chongqing Medical University from Jan 1, 2008, to Dec 31, 2020. The primary endpoints were the cumulative doses of iron and erythropoiesis-stimulating agent; the secondary endpoints were the events of nonfatal myocardial infarction, nonfatal stroke, hospitalization for heart failure, infection rate, and death from any cause. RESULTS: Of the 2124 individuals, 624 individuals were excluded because they met one or more of the exclusion criteria, thus resulting in 1500 individuals who were eligible for inclusion in the study (Group HD, n = 760 and Group LD, n = 740). The median follow-up for the two cohorts was 32 months (range: 25-36). A significant median difference was detected in the monthly iron dose between the groups (1121 mg [range: 800-1274] in the HD group vs. 366 mg [range: 310-690] in the LD group; p < 0.05). The median dose of an erythropoiesis-stimulating agent was 26,323 IU/month (range: 17,596-44,712) in the HD group and 37,934 IU/month (range: 22,402-59,380) in the LD group (median difference: - 7901 IU/month; 95% CI: - 9632--5013; p = 0.000). A significant difference was detected in the secondary endpoints (266 events in 320 cases in the HD group vs. 344 events in 385 cases in the LD group) (HR: 0.62; 95% CI: 0.51-0.79; p < 0.001). A significant difference was not observed in death from any cause (HR: 0.57; 95% CI: 0.48-1.00; p = 0.361). CONCLUSIONS: For individuals undergoing maintenance haemodialysis, high-dose iron sucrose that was proactively administered may be superior to low-dose iron sucrose that was reactively administered with low doses of erythropoiesis-stimulating agent.

Osimertinib versus afatinib in patients with T790M-positive, non-small-cell lung cancer and multiple central nervous system metastases after failure of initial EGFR-TKI treatment.

BACKGROUND: The purpose of this study was to compare the efficacy of osimertinib (OSI) versus afatinib (AFA) in patients with T790M-positive, non-small-cell lung cancer (NSCLC) and multiple central nervous system (CNS) metastases after failure of initial epidermal growth factor receptor tyrosine kinase inhibitor (EGFR-TKI) treatment. METHODS: Consecutive patients with T790M-positive NSCLC and multiple CNS metastases after failure of initial EGFR-TKI treatment were retrospectively identified from our medical institution during 2016-2018 and underwent either oral 80 daily OSI or oral 40 daily AFA every 3 weeks for up to 6 cycles, until disease progression, intolerable adverse events (AEs), or death. The co-primary endpoints were overall survival (OS) and progression-free survival (PFS). RESULTS: The cohort consisted of 124 patients (OSI: n = 60, mean age = 64.24 years [SD: 12.33]; AFA: n = 64, mean age = 64.13 years [SD: 13.72]). After a median follow-up of 24 months (range, 3 to 28), a significant improvement in OS was detected (hazard ratio [HR] 0.59, 95% confidence interval [CI], 0.39-0.91; p = 0.0160; median, 13.7 months [95% CI, 11.1-14.8] for OSI vs 9.6 months [95% CI, 8.4-10.2] for AFA). The median duration of PFS was significantly longer with OSI than with AFA (HR 0.62; 95% CI, 0.41-0.91; p = 0.014; median, 4.5 months [95% CI, 3.5-5.7] vs 3.9 months [95% CI, 3.1-4.8]). The proportion of grade 3 or higher adverse events (AEs) was lower with OSI (22.4%) than with AFA (39.4%). CONCLUSIONS: In patients with T790M-positive NSCLC and multiple CNS metastases after failure of initial EGFR-TKI treatment, OSI may be associated with significantly improved survival benefit compared with AFA, with a controllable tolerability profile.

Three-Dimensional Cuprous Lead Bromide Framework with Highly Efficient and Stable Blue Photoluminescence Emission.

Considering the instability and low photoluminescence quantum yield (PLQY) of blue-emitting perovskites, it is still challenging and attractive to construct single crystalline hybrid lead halides with highly stable and efficient blue light emission. Herein, by rationally introducing d10 transition metal into single lead halide as new structural building unit and optical emitting center, we prepared a bimetallic halide of [(NH4 )2 ]CuPbBr5 with new type of three-dimensional (3D) anionic framework. [(NH4 )2 ]CuPbBr5 exhibits strong band-edge blue emission (441 nm) with a high PLQY of 32 % upon excitation with UV light. Detailed photophysical studies indicate [(NH4 )2 ]CuPbBr5 also displays broadband red light emissions derived from self-trapped states. Furthermore, the 3D framework features high structural and optical stabilities at extreme environments during at least three years. To our best knowledge, this work represents the first 3D non-perovskite bimetallic halide with highly efficient and stable blue light emission.

Activating Graphyne Nanosheet via sp-Hybridized Boron Modulation for Electrochemical Nitrogen Fixation.

Exploring new metal-free catalysts with high activity for nitrogen reduction reaction (NRR) is highly desirable but remains a big challenge. Graphyne (GY) is a typical two-dimensional carbon material with many excellent properties. However, the NRR has rarely been envisaged on a GY-based metal-free catalyst up to now. Density functional theory calculations reveal that although pristine GY is inactive for N2 reduction, boron modulation can endow it with efficient activity toward NRR. Natural bond orbitals analysis, spin/charge density distributions, and free energy change diagrams are performed and discussed. Three boron doping formats including sp2-substituted, sp-substituted, and adsorbed configuration are considered. The obtained data show sp-substitution will induce local moderate spin and charge densities at the boron site on the GY surface, which is convenient for N2 adsorption and activation, and conductive to N-related intermediates formation and transformation. Moreover, the incorporated sp-hybridized boron can provide one empty p orbital and one occupied p orbital around itself, which plays a key role as an electron reservoir to accept electrons from and donate electrons to the adsorbed N-related species, and thus facilitate N2 reduction and ammonia synthesis. Henceforth, it provides more opportunities for preparing GY and other carbon materials as efficient catalysts toward renewable energy conversion and storage.

Holey Ruthenium Nanosheets with Moderate Aluminum Modulation toward Hydrogen Evolution.

Theoretical calculations reveal that aluminum (Al) doping can effectively modulate the electronic structures of 2D ruthenium (Ru) catalysts. Moderate Al incorporation can endow Ru nanosheets with more delocalized electrons and optimal hydrogen adsorption Gibbs free energy, providing opportunities to achieve improved hydrogen evolution performance. Thus, Al-doped Ru nanosheets have been synthesized by a solvothermal strategy, in which they exhibit holey nanosheet structures and have more active sites exposed on the basal plane. The characterizations unraveling the Ru structure can be well maintained, and electrochemical measurements confirm the appropriate amount of Al modulation that can extremely enhance its hydrogen evolution activity.

BML-111 alleviates acute lung injury through regulating the expression of lncRNA MALAT1.

BML-111 is a lipoxin receptor agonist that plays a vital role on inflammation. MALAT1 is reported to mediate lung injury. ALI rat model was established using the method of venous cannula. Pulmonary microvascular endothelial cells (PMVEC) of rats were isolated using immunomagnetic separation method. Hematoxylin-eosin (HE) staining was performed to observe the lung injury degree. Real-time PCR and western blot were performed to detect the genes expression. ELIAS was used to determine the level of TNF-α and IL-6. RNA pull-down and RIP were carried out to affirm the relationship between MALAT1 and TLR4. The lung injury score and lung wet/dry weight ratio was significantly increased in ALI rats, while BML-111 treatment significantly decreased it, the HE staining directly revealed the lung injury. The expression of MALAT1 was decreased, while TLR4 was increased in ALI rats, BML-111 stimulation significantly reversed it. MALAT1 targets TLR4 to regulate its expression. TLR4 regulated the inflammation and cell apoptosis of PMVEC via NF-κB and p38 MAPK signaling pathway. The down-regulated MALAT1 mediates the mechanism of ALI by regulating of NF-κB and p38 MAPK signaling pathways via TLR4, while BML-111 stimulation significantly alleviated the ALI by regulating the expression of MALAT1.

Facile Preparation of Amorphous Fe-Co-Ni Hydroxide Arrays: A Highly Efficient Integrated Electrode for Water Oxidation.

Facile and fast synthesis of functional materials with high catalytic activity is highly demanded to meet the industrial production and applications such as electrolysis. In this study, Ni foam is employed as the current collector and Ni source, which is dipped into the mixture of Fe and Co metal ions solution at room temperature for several minutes, to in situ grow Fe-Co-Ni hydroxide arrays and construct the three-dimensional integrated electrode. This short-time preparation at room temperature is beneficial to avoid the rapid growth of the generated primary nanocrystallites and cause intimate interactions between Fe, Co, and Ni atoms. The obtained self-supported and vertically aligned Fe-Co-Ni hydroxides present an amorphous phase, which exhibit high activity with low overpotentials of 212 mV at 10 mA cm-2 and 319 mV at 100 mA cm-2, associated with a small Tafel slope of 52 mV dec-1 toward the oxygen evolution reaction.

Anion Engineering on Free-Standing Two-Dimensional MoS2 Nanosheets toward Hydrogen Evolution.

On the basis of theoretical predictions, nitrogen was designed and incorporated into free-standing two-dimensional MoS2 nanosheets. Both the amount of electrochemical active sites on the surface and its intrinsic conductivity could be significantly increased as a result of anion engineering, which can extremely improve the electrocatalytic kinetics toward hydrogen evolution.

LIM protein JUB promotes epithelial-mesenchymal transition in colorectal cancer.

Metastasis is the leading cause of cancer-related death in almost all types of cancers, including colorectal cancer (CRC). Metastasis is a complex, multistep, dynamic biological event, and epithelial-mesenchymal transition (EMT) is a critical process during the cascade. Ajuba family proteins are LIM domain-containing proteins and are reported to be transcription repressors regulating different kinds of physiological processes. However, the expression and pathological roles of Ajuba family proteins in tumors, especial in tumor metastasis, remain poorly studied. Here, we found that JUB, but not the other Ajuba family proteins, was highly upregulated in clinical specimens and CRC cell lines. Ectopic expression of JUB induced EMT and enhanced motility and invasiveness in CRC, and vice versa. Mechanistic study revealed that JUB induces EMT via Snail and JUB is also required for Snail-induced EMT. The expression of JUB shows an inverse correlation with E-cadherin expression in clinical specimens. Taken together, these findings revealed that the LIM protein JUB serves as a tumor-promoting gene in CRC by promoting EMT, a critical process of metastasis. Thus, the LIM protein JUB may provide a novel target for therapy of metastatic CRC.

Manufacturing a durable superhydrophobic polypropylene coating on aluminum alloy substrate by adding nano-titania nanoparticles.

A superhydrophobic polypropylene (PP) coating on the surface of aluminum alloy coupons is unstable because of the existence of metastable state in curing process. Nano-titania particles were added into PP solution to form hierarchical micro- and nano-structures of PP coatings on the surface of aluminum alloy coupons. The morphology of the coatings was observed with Scanning Electron Microscopy (SEM), and the corresponding structure and components were investigated with Energy Dispersive Spectrometer (EDS) and X-ray diffractometer (XRD), respectively. The results indicated that nano-TiO2 particles are the main nucleation cores in the curing of the coatings; PP in solution is enclosed in these cores and crystallizes gradually. The coatings can preserve the stable micro- and nano-structure on six months due to the nucleation action of nano-TiO2 particles, and its durable water contact angle (WCA) is about 164 +/- 1.5 degrees.

Rational or altruistic: the impact of social media information exposure on Chinese youth's willingness to donate blood.

Background: Non-remunerated blood donation is the main approach for various medical institutions to get the source of blood supply, but the blood supply shortage is still a problem in today's society. Social media has become the main approach of information acquisition for youth groups nowadays, and the information on social media will have an impact on people's behavioral decisions. The objective of this study was therefore to investigate the correlation between social media exposure to relevant information about blood donation and the willingness of youths to donate blood. Methods: We collected data from 455 questionnaires through an online questionnaire and structural equation modeling was constructed for validation. Data were analyzed for reliability, validity, and demographic differences using IBM-SPSS 26.0, and IBM-SPSS-AMOS 26.0 was used for model fit analysis and path analysis. Results: The results of the study showed that there was a positive correlation between social media exposure to relevant blood donation information and willingness to donate blood (ß = 0.262, p < 0.001), altruism (ß = 0.203, p < 0.001) and self-efficacy (ß = 0.170, p < 0.001). While there was also a positive correlation between attitude toward blood donation and self-efficacy (ß = 0.560, p < 0.001), there was no positive correlation between it and willingness to donate blood (ß = -0.180, p = 0.786). There was also a positive correlation between altruism and willingness to donate blood (ß = 0.150, p < 0.05) and attitude toward blood donation (ß = 0.150, p < 0.001). Similarly, there was a positive correlation between self-efficacy and willingness to donate blood (ß = 0.371, p < 0.001). Conclusion: Exposure to more information related to blood donation on social media can increase the willingness of the youth population to donate blood, while exposure to information related to altruism and self-efficacy on social media can also enhance young people's attitudes toward blood donation, while further strengthening their willingness to donate.

Hypergraph regularized nonnegative triple decomposition for multiway data analysis.

Tucker decomposition is widely used for image representation, data reconstruction, and machine learning tasks, but the calculation cost for updating the Tucker core is high. Bilevel form of triple decomposition (TriD) overcomes this issue by decomposing the Tucker core into three low-dimensional third-order factor tensors and plays an important role in the dimension reduction of data representation. TriD, on the other hand, is incapable of precisely encoding similarity relationships for tensor data with a complex manifold structure. To address this shortcoming, we take advantage of hypergraph learning and propose a novel hypergraph regularized nonnegative triple decomposition for multiway data analysis that employs the hypergraph to model the complex relationships among the raw data. Furthermore, we develop a multiplicative update algorithm to solve our optimization problem and theoretically prove its convergence. Finally, we perform extensive numerical tests on six real-world datasets, and the results show that our proposed algorithm outperforms some state-of-the-art methods.

Characterization of an NDM-1-Producing Citrobacter koseri Isolate from China.

Purpose: The continuous rise in carbapenemase-producing Enterobacteriaceae infections is a major public health concern. However, there is limited information available on New Delhi metallo-ß-lactamase-1 (NDM-1) producing Citrobacter koseri. In this study, we isolated a blaNDM-1-carrying C. koseri from a stool sample of an inpatient. Our aim was to investigate the phenotypic and genomic features of this clinically derived carbapenem-resistant C. koseri isolate and to characterize the transmission pattern of the IncFII/IncN plasmid that carries the blaNDM-1 gene. Methods and Results: S1-PFGE, Southern blot and conjugation assay confirmed the presence of blaNDM-1 gene in a conjugative plasmid. C. koseri L2395 and transconjugant L2395-EC600 strains showed similar resistance spectrum. Whole-genome analysis revealed that pL2395_NDM is an IncFII/IncN plasmid with a length of 67,839 bp. Moreover, blaNDM-1 gene was found encoded in the ISKpn19-blaNDM-1-ble-tnpF-dsbD-cutA-ISKpn19 cassette array. Phylogenetic analysis revealed that strain L2395 was close to an IMP-4-bearing C. koseri from Australia. Conclusion: Ongoing surveillance will be essential to control and prevent the spread of carbapenem-resistant Citrobacter spp. in the future.

Ultra-dense Motion Capture: An exploratory full-automatic approach for dense tracking of breast motion in 4D.

Understanding the dynamic deformation pattern and biomechanical properties of breasts is crucial in various fields, including designing ergonomic bras and customized prostheses, as well as in clinical practice. Previous studies have recorded and analyzed the dynamic behaviors of the breast surface using 4D scanning, which provides a sequence of 3D meshes during movement with high spatial and temporal resolutions. However, these studies are limited by the lack of robust and automated data processing methods which result in limited data coverage or error-prone analysis results. To address this issue, we identify revealing inter-frame dense correspondence as the core challenge towards conducting reliable and consistent analysis of the 4D scanning data. We proposed a fully-automatic approach named Ulta-dense Motion Capture (UdMC) using Thin-plate Spline (TPS) to augment the sparse landmarks recorded via motion capture (MoCap) as initial dense correspondence and then rectified it with a sophisticated post-alignment scheme. Two downstream tasks are demonstrated to validate its applicability: virtual landmark tracking and deformation intensity analysis. For evaluation, a dynamic 4D human breast anthropometric dataset DynaBreastLite was constructed. The results show that our approach can robustly capture the dynamic deformation characteristics of the breast surfaces, significantly outperforms baselines adapted from previous works in terms of accuracy, consistency, and efficiency. For 10 fps dataset, average error of 0.25 cm on control-landmarks and 0.33 cm on non-control (arbitrary) landmarks were achieved, with 17-70 times faster computation time. Evaluation was also carried out on 60 fps and 120 fps datasets, with consistent and large performance gaining being observed. The proposed method may contribute to advancing research in breast anthropometry, biomechanics, and ergonomics by enabling more accurate tracking of the breast surface deformation patterns and dynamic characteristics.

Construction of multi-component finite element model to predict biomechanical behaviour of breasts during running and quantification of the stiffness impact of internal structure.

This study aims to investigate the biomechanical behaviour and the stiffness impact of the breast internal components during running. To achieve this, a novel nonlinear multi-component dynamic finite element method (FEM) has been established, which uses experimental data obtained via 4D scanning technology and a motion capture system. The data are used to construct a geometric model that comprises the rigid body, layers of soft tissues, skin, pectoralis major muscle, fat, ligaments and glandular tissues. The traditional point-to-point method has a relative mean absolute error of less than 7.92% while the latest surface-to-surface method has an average Euclidean distance (d) of 7.05 mm, validating the simulated results. After simulating the motion of the different components of the breasts, the displacement analysis confirms that when the motion reaches the moment of largest displacement, the displacement of the breast components is proportional to their distance from the chest wall. A biomechanical analysis indicates that the stress sustained by the breast components in ascending order is the glandular tissues, pectoralis major muscle, adipose tissues, and ligaments. The ligaments provide the primary support during motion, followed by the pectoralis major muscle. In addition, specific stress points of the breast components are identified. The stiffness impact experiment indicates that compared with ligaments, the change of glandular tissue stiffness had a slightly more obvious effect on the breast surface. The findings serve as a valuable reference for the medical field and sports bra industry to enhance breast protection during motion.

Upregulation of CPE promotes cell proliferation and tumorigenicity in colorectal cancer.

BACKGROUND: Colorectal cancer (CRC) is one of the most common cancers worldwide and a leading cause of cancer related death. Although the mortality rate of CRC is decreasing, finding novel targets for its therapy remains urgent. Carboxypeptidase E (CPE), a member of the pro-protein convertases, which are involved in the maturation of protein precursors, has recently been reported as elevated in many types of cancer. However, its role and mechanisms in tumor progression are poorly understood. METHODS: In the present study, we investigated expression of CPE in CRC cell lines and tumor tissues using Western blot and real-time qRT-PCR. Plasmids for overexpression and depletion of CPE were constructed and analyzed by Western blot, MTT and colony formation assays and bromodeoxyuridine incorporation assays. The relative expression of p21, p27, and cyclin D1 were analyzed by Real-time qRT-PCR in the indicated cells. RESULTS: Our study showed that CPE was significantly upregulated in CRC cell lines and tumor tissues. MTT and colony formation assays indicated that overexpression of CPE enhanced cell growth rates. BrdU incorporation and flow-cytometry assays showed that ectopic expression of CPE increased the S-phase fraction cells. Soft agar assay proved enhanced tumorigenicity activity in CPE over-expressing CRC cells. Further studies of the molecular mechanisms of CPE indicated that is promoted cell proliferation and tumorigenicity through downregulation of p21 and p27, and upregulation of cyclin D1. CONCLUSIONS: Taken together, these data suggest that CPE plays an important role in cell cycle regulation and tumorigenicity, and may serve as a potential target for CRC therapeutics.

Preparation of micro/nano-structure superhydrophobic film on aluminum plates using galvanic corrosion method.

A simple and novel approach has been developed to obtain a microporous film with compound nanoparticles on the surface of aluminum alloy substrate using the galvanic corrosion method. The wettability of the surface changes from hydrophilicity to superhydrophobicity after chemical modification with stearic acid (SA). The water contact angle (WCA) and sliding angle (WSA) of superhydrophobic aluminum alloy surface (SAAS) are 154 degrees and 9 degrees, respectively. The roughness of the aluminum substrate increases after the oxidation reaction. The porous aluminum matrix surface is covered with irregularly shaped holes with a mean radius of about 15 microm, similar to the surface papillae of natural Lotus leaf, with villus-like nanoparticles array on pore surfaces. The superhydrophobic property is attributed to this special surface morphology and low surface energy SA. X-ray powder diffraction (XRD) pattern and Energy Dispersive X-Ray Spectroscopy (EDS) spectrum indicate that Al2O3, Al(OH)3 and AIO(OH) has been formed on the surface of aluminum substrate after the oxidation reaction. The Raman spectra indicate that C-H bond from SA and the Al-O are formed on the SAAS. The as-formed SAAS has good stability.

Microstructural Characterization of the As-Cast and Homogenized Al-Cu-Mg-Ag Alloy.

In this study, the as-cast microstructure and the evolution of the homogenized microstructure of large-scale industrialized Al-Cu-Mg-Ag heat-resistant aluminum alloy ingots were investigated by means of optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive analysis (EDS), and differential scanning calorimetry (DSC). The results indicate that the dendritic segregation is evident in the ingot along the radial direction, and the grain boundaries are decorated with lots of net-shaped continuous eutectic structures. With the homogenization time extension and the homogenization temperature increase, the eutectic phases (i.e., the primary Al2Cu phase, the Al2CuMg phase, and the AlCuMgAg quaternary phase) at the grain boundaries gradually dissolve back into the matrix. Meanwhile, most of the dendritic grain boundaries gradually become sparse and thinner. Finally, it is found that the optimal homogenization regime of the Al-Cu-Mg-Ag alloy is 420 °C/5 h+480 °C/8 h+515 °C/24 h.