Reviewing the process intensification landscape through the introduction of a novel, multitiered classification for downstream processing.

A demand for process intensification in biomanufacturing has increased over the past decade due to the ever-expanding market for biopharmaceuticals. This is largely driven by factors such as a surge in biosimilars as patents expire, an aging population, and a rise in chronic diseases. With these market demands, pressure upon biomanufacturers to produce quality products with rapid turnaround escalates proportionally. Process intensification in biomanufacturing has been well received and accepted across industry based on the demonstration of its benefits of improved productivity and efficiency, while also reducing the cost of goods. However, while these benefits have been shown empirically, the challenges of adopting process intensification into industry remain, from smaller independent start-up to big pharma. Traditionally, moving from batch to a process intensification scheme has been viewed as an "all or nothing" approach involving continuous bioprocessing, in which the factors of complexity and significant capital costs hinder its adoption. In addition, the literature is crowded with a variety of terms used to describe process intensification (continuous, periodic counter-current, connected, intensified, steady-state, etc.). Often, these terms are used inappropriately or as synonyms, which generates confusion in the field. Through a detailed review of current state-of-the-art systems, consumables, and process intensification case studies, we herein propose a defined approach in the implementation of downstream process intensification through a standardized nomenclature and viewing it as distinct independent levels. These can function separately as intensified single-unit operations or be built upon by integration with other process steps allowing for simple, incremental, cost-effective implementation of process intensification in the manufacturing of biopharmaceuticals.

Simulation of pH level distribution inside a coiled flow inverter for continuous low pH viral inactivation.

The continuous production of monoclonal antibodies (mAbs) with the help of disposable equipment poses one of the future major changes in the pharmaceutical industry. Consequently, continuous viral clearance needs to be developed as well. The coiled flow inverter (CFI) was successfully implemented in the continuous downstream as a residence time module for low pH viral inactivation. As the elution profile of the upstream continuously operated protein A chromatography results in fluctuating pH values, the pH level distribution inside the CFI is highly relevant. This study presents a detailed investigation of pH level distribution inside the CFI at varying inlet conditions with the help of computational fluid dynamics simulation. The simulation model was validated first with the help of experimental data. Afterwards, the model was used for further investigations. It was determined that with a pH sine curve as input, the duration until steady state at the outlet requires two times the minimum residence time of the apparatus. Moreover, it could be observed that the CFI itself offers a progressive dampening effect on the pH level distribution. Afterwards, different forms of the sine curve representing different operation modes of the continuous protein A chromatograph were tested to evaluate this dampening capability. It became clear that the switch time has the highest influence on the resulting pH of the outlet stream and should be considered for process development. Finally, the radial pH profiles at different positions inside the CFI were determined. This once again revealed the high radial mixing capability of the CFI and its influence on the resulting product stream.

Simulation of continuous low pH viral inactivation inside a coiled flow inverter.

Continuous production of monoclonal antibodies is gaining more and more importance. To ensure continuous flow through the entire process as well as viral safety, continuous viral clearance needs to be investigated as well. This study focuses on low pH viral inactivation inside a coiled flow inverter (CFI). Computational fluid dynamics (CFD) simulation is used to gain further insight into the inactivation process inside the apparatus. The influence of viruses in comparison to different tracer elements on the residence time distribution (RTD) behavior is investigated. Finally, the viral inactivation kinetics are implemented into the CFD simulation and real process conditions are simulated. These are compared to experimental results. To the authors' knowledge, this study represents the first successful simulation of continuous viral inactivation inside a CFI. It allows the detailed analysis of processes inside the apparatus and the prediction of experimental virus study results and will therefore contribute to the effective planning of future validation studies.

Side-by-side comparability of batch and continuous downstream for the production of monoclonal antibodies.

Continuous processing is the future production method for monoclonal antibodies (mAbs). A fully continuous, fully automated downstream process based on disposable equipment was developed and implemented inside the MoBiDiK pilot plant. However, a study evaluating the comparability between batch and continuous processing based on product quality attributes was not conducted before. The work presented fills this gap comparing both process modes experimentally by purifying the same harvest material (side-by-side comparability). Samples were drawn at different time points and positions in the process for batch and continuous mode. Product quality attributes, product-related impurities, as well as process-related impurities were determined. The resulting polished material was processed to drug substance and further evaluated regarding storage stability and degradation behavior. The in-process control data from the continuous process showed the high degree of accuracy in providing relevant process parameters such as pH, conductivity, and protein concentration during the entire process duration. Minor differences between batch and continuous samples are expected as different processing conditions are unavoidable due to the different nature of batch and continuous processing. All tests revealed no significant differences in the intermediates and comparability in the drug substance between the samples of both process modes. The stability study of the final product also showed no differences in the stability profile during storage and forced degradation. Finally, online data analysis is presented as a powerful tool for online-monitoring of chromatography columns during continuous processing.

Virus study for continuous low pH viral inactivation inside a coiled flow inverter.

Continuous processing for the production of monoclonal antibodies (mAb) gains more and more importance. Several solutions exist for all the necessary production steps, leading to the possibility to build fully continuous processes. Low pH viral inactivation is a part of the standard platform process for mAb production. Consequently, Klutz et al. introduced the coiled flow inverter (CFI) as a tool for continuous low pH viral inactivation. Besides theoretical calculations of viral reduction, no viral clearance study has been presented so far. In addition, the validation of continuous viral clearance is often neglected in the already existing studies for continuous processing. This study shows in detail the development and execution of a virus study for continuous low pH viral inactivation inside a CFI. The concept presented is also valid for adaptation to other continuous viral clearance steps. The development of this concept includes the technical rationale for an experimental setup, a valid spiking procedure, and finally a sampling method. The experimental results shown represent a viral study using xenotropic murine leukemia virus as a model virus. Two different protein A (ProtA) chromatography setups with varying pH levels were tested. In addition, one of these setups was tested against a batch experiment utilizing the same process material. The results show that sufficient low pH viral inactivation (decadic logarithm reduction value >4) was achieved in all experiments. Complete viral inactivation took place within the first 14.5 min for both continuous studies and the batch study, hence showing similar results. This study therefore represents a successful virus study concept and experiment for a continuous viral inactivation step. Moreover, it was shown that the transfer from batch results to the continuous process is possible. This is accomplished by the narrow residence time distribution of the CFI, showing how close the setup approaches the ideal plug flow and with that batch operation.

Developing the biofacility of the future based on continuous processing and single-use technology.

To maintain or strengthen their market position, biopharmaceutical producers have to adapt their production facilities to a drastically changed market environment. Contrary to currently used large scale batch-wise operated production facilities, where stainless steel equipment is widely applied, small scale and flexible production processes are desired. Consequently, the concept of the "biofacility of the future" has been developed, which combines the attributes fast, flexible, small, inexpensive and sustainable. Four design principles build the facility's basis and are presented within this work: continuous processing, 100% single-use equipment, closed processing and adopting the ballroom concept. However, no publication presents a completely continuously operated platform process for the production of monoclonal antibodies up to now. Therefore, this work establishes the proof of concept regarding continuous antibody manufacturing. A pilot plant for the production of monoclonal antibodies has been built 100% in single-use equipment. It was operated fully continuous and automated in the upstream and the downstream part. The concepts that allow continuously operating the pilot plant are presented within this work, i.e., continuously operated filtration, continuously operated viral inactivation, continuously operated chromatography and a continuously operated formulation. Analytics showed that the produced product was within specification limits of industrial bulk drug substances.