MUC1 promotes cervical squamous cell carcinoma through ERK phosphorylation-mediated regulation of ITGA2/ITGA3.

In contrast to the decreasing trends in developed countries, the incidence and mortality rates of cervical squamous cell carcinoma in China have increased significantly. The screening and identification of reliable biomarkers and candidate drug targets for cervical squamous cell carcinoma are urgently needed to improve the survival rate and quality of life of patients. In this study, we demonstrated that the expression of MUC1 was greater in neoplastic tissues than in non-neoplastic tissues of the cervix, and cervical squamous cell carcinoma patients with high MUC1 expression had significantly worse overall survival than did those with low MUC1 expression, indicating its potential for early diagnosis of cervical squamous cell carcinoma. Next, we explored the regulatory mechanism of MUC1 in cervical squamous cell carcinoma. MUC1 could upregulate ITGA2 and ITGA3 expression via ERK phosphorylation, promoting the proliferation and metastasis of cervical cancer cells. Further knockdown of ITGA2 and ITGA3 significantly inhibited the tumorigenesis of cervical cancer cells. Moreover, we designed a combination drug regimen comprising MUC1-siRNA and a novel ERK inhibitor in vivo and found that the combination of these drugs achieved better results in animals with xenografts than did MUC1 alone. Overall, we discovered a novel regulatory pathway, MUC1/ERK/ITGA2/3, in cervical squamous cell carcinoma that may serve as a potential biomarker and therapeutic target in the future.

MUC1 is overexpressed in cervical squamous cell carcinoma. MUC1 regulates ERK phosphorylation, and subsequently upregulates ITGA2 and ITGA3 expression to promote tumorigenesis in cervical squamous cell carcinoma. A combination drug regimen targeting MUC1 and ERK achieved better results compared than MUC1 alone.

Predictors of self-regulation fatigue patterns in patients before total knee arthroplasty: A cross-sectional study.

BACKGROUND: Patients with total knee arthroplasty encounter stressful events that consume their coping resources, resulting in self-control fatigue. Few studies have focused on this phenomenon. AIM: To identify subgroups of patients before total knee arthroplasty according to the heterogeneous patterns of self-regulation fatigue and to analyse the predictors of subtypes. METHODS: A total of 210 patients awaiting total knee arthroplasty were enrolled. Data of demographic characteristics, clinical characteristics, psychological and social factors were collected. Latent profile analysis was employed to define the subgroups. Predictors of patterns were identified using multinomial logistic regression. RESULTS: Three latent classes were identified: the low, medium, and high self-regulation fatigue classes. For the high self-regulation fatigue class, lower levels of hope, social support, self-efficacy and education were major predictors. CONCLUSION: These predictors of patients with different levels of self-regulation fatigue provide evidence for the identification of vulnerable populations and lay a foundation for targeted interventions.

Mixed pollutants adsorption potential of Eichhornia crassipes biochar on Manihot esculenta processing industry effluents.

The starch is one of the most essential food stuff and serves as a raw material for number of food products for the welfare of human. During the production process enormous volume of effluents are being released into the environment. In this regard, this study was performed to evaluate the physicochemical traits of Manihot esculenta processing effluent and possible sustainable approach to treat this issue using Eichhornia crassipes based biochar. The standard physicochemical properties analysis revealed that the most the parameters (EC was recorded as 4143.17 ± 67.12 mhom-1, TDS: 5825.62 ± 72.14 mg L-1, TS: 7489.21 ± 165.24 mg L-1, DO: 2.12 ± 0.21 mg L-1, BOD 2673.74 ± 153.53 mg L-1, COD: 6672.66 ± 131.21 mg L-1, and so on) were beyond the permissible limits and which can facilitate eutrophication. Notably, the DO level was considerably poor and thus can support the eutrophication. The trouble causing E. crassipes biomass was used as raw material for biochar preparation through pyrolysis process. The temperature ranging from 250 to 350 °C with residence time of 20-60 min were found as suitable temperature to provide high yield (56-33%). Furthermore, 10 g L-1 concentration of biochar showed maximum pollutant adsorption than other concentrations (5 g L-1 and 15 g L-1) from 1 L of effluent. The suitable temperature required to remediate the pollutants from the effluent by biochar was found as 45 °C and 35 °C at 10 g L-1 concentration. These results conclude that at such optimized condition, the E. crassipes effectively adsorbed most of the pollutants from the M. esculenta processing effluent. Furthermore, such pollutants adsorption pattern on biochar was confirmed by SEM analysis.

Utilization of the Nannochloropsis microalgae biochar prepared via microwave assisted pyrolysis on the mixed biomass fuel pellets.

Nannochloropsis microalgae biochar has become increasingly attractive due to its potential as a component of microalgae-based biodiesel blends. This biochar is a by-product of the pyrolysis process, but its use in the energy sector has been limited. In this study, pellets were formed using microalgae residues and their physiochemical properties were analyzed to assess the feasibility of using microalgae biochar as a fuel source. Three types of biomasses, namely date seed dust, coconut shell waste, and microalgae biochar, were utilized to produce fuel pellets. These pellets were categorized into three types, B1, B2, and B3, based on the composition of the biomass. The inclusion of microalgae biochar in the pellets resulted in enhanced calorific value, as well as improved heating value and bulk density. Moreover, the mechanical strength of microalgae-based pellets was higher due to their high lignin content compared to another biomass. The moisture absorption test results showed that the use of mixed biomass reduced the moisture content over an extended period. Microalgae pellets exhibited higher young's modulus and greater impact resistance, indicating greater mechanical strength. Furthermore, due to their higher calorific value, the combustion time of microalgae pellets was greater than that of other biomass. In conclusion, the results of this study suggest that microalgae biochar can be a promising alternative fuel source for the energy sector.

Predictors of psychological resilience trajectories in patients with knee arthroplasty: A longitudinal study.

AIMS: To identify the different classes of total knee arthroplasty patients according to the heterogenous trajectories of psychological resilience and investigate the predictors for different patterns of resilience. DESIGN: A prospective cohort study. METHODS: A total of 210 patients with total knee arthroplasty from March to December 2021 were included. Baseline assessment (T0) data were collected before surgery and included demographic, biological (clinical characteristics), psychological (psychological resilience, self-efficacy, psychological distress, hope, medical coping mode) and social (social support) factors. Resilience measurements were repeated at 3 days after surgery (T1), the date of discharge (T2), and 1 month (T3) and 3 months (T4) after discharge. Latent growth mixture modelling was employed to define different resilience trajectories. Predictors of class membership were identified using multinomial logistic regression. RESULTS: Data from 198 patients were analysed. Three latent classes were identified with similar patterns in different intercepts, showing a significant decrease in resilience from admission (T0) to 3 days after surgery (T1) followed by an increase from T1 to T4. The three trajectories of psychological resilience were named the stable-resilience class (65.66%), high-resilience class (17.68%), and low-resilience class (16.66%). Multinomial logistic regression showed that compared with the stable-resilience class, the high-resilience class was predicted by having a higher level of hope, having higher education, living in urban areas and having more children, while the low-resilience class was predicted by having lower levels of self-efficacy and hope, living in semirural areas, and having more children. CONCLUSIONS: The three trajectories indicated that surgery was the major stressor influencing patients' psychological resilience and that patients in the low-resilience class needed to be intervened. IMPACT: Predictors of patients in different classes provide evidence for the identification of vulnerable populations and lay a foundation for future research contributing to the development of targeted interventions for improving patients' psychological resilience. No patient or public contribution but the time points of investigation were decided based on our interviews with 12 total knee arthroplasty patients.

Effects of an enhanced recovery after surgery nursing programme on surgical site wound infection and postoperative complications in patients undergoing total knee arthroplasty: A meta-analysis.

This meta-analysis aimed to investigate the effects of the enhanced recovery after surgery (ERAS) nursing program on surgical wound infection (SWI) and postoperative complications in patients undergoing total knee arthroplasty (TKA). The PubMed, Web of Science, Cochrane Library, Embase, China National Knowledge Infrastructure and Wanfang databases were searched from the date of establishment of the database until August 2023 for randomised controlled trials (RCTs) that assessed the effects of the ERAS nursing program on SWI and postoperative complications in patients undergoing TKA. The literature was screened, data were extracted by two independent investigators, and the literature quality was assessed using the methods recommended by the Cochrane Collaboration. Data analysis was performed using Stata 17.0 software. Nineteen RCTs with 1580 patients were included in the study. The meta-analysis results showed that the rates of SWI (odds ratio [OR] = 0.19, 95% confidence interval [CI]: 0.10-0.37, p < 0.001) and postoperative complications (OR = 0.18, 95% CI: 0.12-0.25, p < 0.001) were significantly lower in the ERAS intervention group than those in the control group. Therefore, ERAS intervention after TKA can significantly reduce the occurrence of SWI and postoperative complications. It has a remarkable rehabilitation effect and can be widely used in clinical settings.

Substituting urea with biogas slurry and hydrothermal carbonization aqueous product could decrease NH3 volatilization and increase soil DOM in wheat growth cycle.

Biogas slurry (BS) and hydrothermal carbonization aqueous products (HAP), which are rich in nitrogen (N) and dissolved organic matter (DOM), can be used as organic fertilizer to substitute inorganic N fertilizer. To evaluate the effects of co-application of BS and HAP on the ammonia (NH3) volatilization and soil DOM content in wheat growth season, we compared six treatments that substituting 50%, 75%, and 100% of urea-N with BS plus HAP at low (L) or high (H) ratio, named BCL50, BCL75, BCL100, BCH50, BCH75, BCH100, respectively. Meanwhile, urea alone treatment was set as the control (CKU). The results showed that both BCL and BCH treatments significantly mitigate the NH3 volatilizations by 9.1%-45.6% in comparison with CKU (P < 0.05), whose effects were correlated with soil NH4+-N content. In addition, the decrease in soil urease activity contributed to the lower NH3 volatilization following application of BS plus HAP. Notably, BS plus HAP applications increased the microbial byproduct- and humic acid-like substances in soil by 9.9%-74.5% and 100.7%-451.9%, respectively. Consequently, BS and HAP amended treatments significantly increased soil humification index and DOM content by 13.7%-41.2% and 38.4%-158.7%, respectively (P < 0.05). This study suggested that BS and HAP could be co-applied into agricultural soil as a potential alternative of inorganic fertilizer N, which can decrease NH3 loss but increase soil fertility.

CircHOMER1 aggravates oxidative stress, inflammation and extracellular matrix deposition in high glucose-induced human mesangial cells.

BACKGROUND: Circular RNAs (circRNAs) play an important regulatory role in human diseases, including diabetic nephropathy (DN). The purpose of this study was to investigate the role and mechanism of circHOMER1 action in DN. METHODS: Human mesangial cells (HMCs) were tested with high glucose (HG) to mimic DN cell models. Quantitative real-time PCR was performed to determine circHOMER1, microRNA (miR)-137 and SRY-box transcription factor 6 (SOX6) expression. SOD activity and MDA level were detected to evaluate cell oxidative stress. ELISA assay was used to analyse the levels of inflammation factors. The protein levels of extracellular matrix (ECM) deposition-related markers and SOX6 were assessed by western blot analysis. The interaction between miR-137 and circHOMER1 or SOX6 was analysed by dual-luciferase reporter assay and RNA pull-down assay. RESULTS: CircHOMER1 was highly expressed in HG-induced HMCs and DN patients. Downregulation of circHOMER1 suppressed oxidative stress, inflammation and ECM deposition in HMCs induced by HG. In terms of mechanism, circHOMER1 could sponge miR-137 to regulate SOX6. Function assays showed that miR-137 inhibitor or SOX6 overexpression revoked the negative regulation of circHOMER1 knockdown on HG-induced HMCs injury. In addition, miR-137 expression was negatively correlated with circHOMER1 and SOX6 expression in DN patients. CONCLUSION: CircHOMER1 promoted HG-induced HMCs oxidative stress, inflammation and ECM accumulation via the miR-137/SOX6 axis, suggesting that circHOMER1 might be a target for DN treatment.

Leaf-root-soil N:P stoichiometry of ephemeral plants in a temperate desert in Central Asia.

Ephemeral plants are a crucial vegetation component in temperate deserts of Central Asia, and play an important role in biogeochemical cycle and biodiversity maintenance in desert ecosystems. However, the nitrogen (N) and phosphorus (P) status and interrelations of leaf-root-soil of ephemeral plants remain unclear. A total of 194 leaf-root-soil samples of eight ephemeral species at 37 sites in the Gurbantunggut Desert, China were collected, and then the corresponding N and P concentrations, and the N:P ratio were measured. Results showed that soil parameters presented no significant difference among the eight species. The total soil N:P was only 0.116 (geomean), indicating limited soil N, while the available soil N:P (4.896, geomean) was significantly larger than the total N:P. The leaf N (averagely 30.995 mg g-1) and P (averagely 1.523 mg g-1) concentrations were 2.64-8.46 and 0.93-3.99 times higher than the root N (averagely 8.014 mg g-1) and P (averagely 0.802 mg g-1) concentrations, respectively. Thus, leaf N:P (averagely 21.499) was 1.410-2.957 times higher than root N:P (averagely 11.803). Meanwhile, significant interspecific differences existed in plant stoichiometric traits. At the across-species level, N content scaled as the 3/4-power of P content in both leaves and roots. Leaf and root N:P ratios were mainly influenced by P; however, the leaf-to-root N or P ratio was dominated by roots. Leaf and root N, P contents and N:P were generally unrelated to soil nutrients, and the former presented lower variation than the latter, indicating a strong stoichiometric homeostasis for ephemerals. These results demonstrate that regardless of soil nutrient supply capacity in this region, the fast-growing ephemeral plants have formed a specific leaf-root-soil stoichiometric relation and nutrient use strategy adapting to the extreme desert environment.

Design and Analysis of Broadband LiNbO3 Optical Waveguide Electric Field Sensor with Tapered Antenna.

The three-dimensional (3D) simulation model of a lithium niobate (LiNbO3, LN) optical waveguide (OWG) electric field sensor has been established by using the full-wave electromagnetic simulation software. The influences of the LN substrate and the packaging material on the resonance frequency of the integrated OWG electric field sensor have been simulated and analyzed. The simulation results show that the thickness of the LN substrate has a great influence on the resonant frequency of the sensor (≈33.4%). A sensor with a substrate thickness of 1 mm has been designed, fabricated, and experimentally investigated. Experimental results indicate that the measured resonance frequency is 7.5 GHz, which nearly coincides with the simulation results. Moreover, the sensor can be used for the measurement of the nanosecond electromagnetic impulse (NEMP) in the time domain from 1.29 kV/m to 100.97 kV/m.

The Validity and Reliability of a Tire Pressure-Based Power Meter for Indoor Cycling.

The purpose of this study was to evaluate the validity and reliability of a tire pressure sensor (TPS) cycling power meter against a gold standard (SRM) during indoor cycling. Twelve recreationally active participants completed eight trials of 90 s of cycling at different pedaling and gearing combinations on an indoor hybrid roller. Power output (PO) was simultaneously calculated via TPS and SRM. The analysis compared the paired 1 s PO and 1 min average PO per trial between devices. Agreement was assessed by correlation, linear regression, inferential statistics, effect size, and Bland-Altman LoA. Reliability was assessed by ICC and CV comparison. TPS showed near-perfect correlation with SRM in 1 s (rs = 0.97, p < 0.001) and 1-min data (rs = 0.99, p < 0.001). Differences in paired 1 s data were statistically significant (p = 0.04), but of a trivial magnitude (d = 0.05). There was no significant main effect for device (F(1,9) = 0.05, p = 0.83, ηp2 = 0.97) in 1 min data and no statistical differences between devices by trial in post hoc analysis (p < 0.01-0.98; d < 0.01-0.93). Bias and LoA were -0.21 ± 16.77 W for the 1 min data. Mean TPS bias ranged from 3.37% to 7.81% of the measured SRM mean PO per trial. Linear regression SEE was 7.55 W for 1 min TPS prediction of SRM. ICC3,1 across trials was 0.96. No statistical difference (p = 0.09-0.11) in TPS CV (3.6-5.0%) and SRM CV (4.3-4.7%). The TPS is a valid and reliable power meter for estimating average indoor PO for time periods equal to or greater than 1 min and may have acceptable sensitivity to detect changes under less stringent criteria (±5%).

Seed priming and foliar application with jasmonic acid enhance salinity stress tolerance of soybean (Glycine max L.) seedlings.

BACKGROUND: Jasmonic acid (JA) is an important molecule that has a regulatory effect on many physiological processes in plant growth and development under abiotic stress. This study investigated the effect of 60 µmol L-1 of JA in seed priming (P) at 15 °C in darkness for 24 h, foliar application (F), and/or their combination effect (P + F) on two soybean cultivars - 'Nannong 99-6' (salt tolerant) and 'Lee 68' (salt sensitive) - under salinity stress (100 mmol L-1 sodium chloride (NaCl)). RESULTS: Salinity stress reduced seedling growth and biomass compared with that in the control condition. Priming and foliar application with JA and/or their combination significantly improved water potential, osmotic potential, water use efficiency, and relative water content of both cultivars under salinity stress. Similarly, seed priming with JA, foliar application of JA, and/or their combination significantly improved the following properties under salinity stress compared with the untreated seedlings: net photosynthetic rate by 68.03%, 59.85%, and 76.67% respectively; transpiration rate by 74.85%, 55.10%, and 80.26% respectively; stomatal conductance by 69.88%, 78.25%, and 26.24% respectively; intercellular carbon dioxide concentration by 61.64%, 40.06%, and 65.79% respectively; and total chlorophyll content by 47.41%, 41.02%, and 55.73% respectively. Soybean plants primed, sprayed with JA, or treated with their combination enhanced the chlorophyll fluorescence, which was damaged by salinity stress. JA treatments improved abscisic acid, gibberellic acid, and JA levels by 60.57%, 62.50% and 52.25% respectively under salt stress compared with those in the control condition. The transcriptional levels of the FeSOD, POD, CAT, and APX genes increased significantly in the NaCl-stressed seedlings irrespective of JA treatments. Moreover, JA treatment resulted in a reduction of sodium ion concentration and an increase of potassium ion concentrations in the leaf and root of both cultivars regardless of salinity stress. Monodehydroascorbate reductase, dehydroascorbate reductase, and proline contents decreased in the seedlings treated with JA under salinity stress, whereas the ascorbate content increased with JA treatment combined with NaCl stress. CONCLUSION: The application of 60 µmol L-1 JA improved plant growth by regulating the interaction between plant hormones and hydrogen peroxide, which may be involved in auxin signaling and stomatal closure under salt stress. These methods could efficiently protect early seedlings and alleviate salt stress damage and provide possibilities for use in improving soybean growth and inducing tolerance against excessive soil salinity. © 2020 Society of Chemical Industry.

Oil crop genetic modification for producing added value lipids.

Plant lipids, mainly stored in seeds and other plant parts, are not only a crucial resource for food and fodder but are also a promising alternative to fossil oils as a chemical industry feedstock. Oil crop cultivation and processing are always important parts of agriculture worldwide. Vegetable oils containing polyunsaturated fatty acids, very long chain fatty acids, conjugated fatty acids, hydroxy fatty acids and wax esters, have outstanding nutritional, lubricating, surfactant, and artificial-fibre-synthesis properties, amongst others. Enhancing the production of such specific lipid components is of economic interest. There has been a considerable amount of information reported about plant lipid biosynthesis, including identification of the pathway map of carbon flux, key enzymes (and the coding genes), and substrate affinities. Plant lipid biosynthesis engineering to produce special oil compounds has become feasible, although until now, only limited progress has been made in the laboratory. It is relatively easy to achieve the experimental objectives, for example, accumulating novel lipid compounds in given plant tissues facilitated by genetic modification. Applying such technologies to agricultural production is difficult, and the challenge is to make engineered crops economically attractive, which is impeded by only moderate success. To achieve this goal, more complicated and systematic strategies should be developed and discussed based on the relevant results currently available.

Recent Advances of Natural Polyphenols Activators for Keap1-Nrf2 Signaling Pathway.

The Keap1-Nrf2/ARE signaling pathway is an important defense system against exogenous and endogenous oxidative stress injury. The dysregulation of the signaling pathway is associated with many diseases, such as cancer, diabetes, and respiratory diseases. Over the years, a wide range of natural products has provided sufficient resources for the discovery of potential therapeutic drugs. Among them, polyphenols possess Nrf2 activation, not only inhibit the production of ROS, inhibit Keap1-Nrf2 protein-protein interaction, but also degrade Keap1 and regulate the Nrf2 related pathway. In fact, with the continuous improvement of natural polyphenols separation and purification technology and further studies on the Keap1-Nrf2 molecular mechanism, more and more natural polyphenols monomer components of Nrf2 activators have been gradually discovered. In this view, we summarize the research status of natural polyphenols that have been found with apparent Nrf2 activation and their action modes. On the whole, this review may guide the design of novel Keap1-Nrf2 activator.

[Study of the mechanism underlying the effect of SOCS3 rs4969170 A/G polymorphism on the occurrence of insulin resistance in chronic hepatitis C patients].

OBJECTIVE: To study the mechanism underlying the effect of the SOCS3 rs4969170 A/G alleles on the occurrence of insulin resistance (IR) in patients with chronic hepatitis C. METHODS: The promoter region of the SOCS3 gene was amplified by PCR,and luciferase expression vectors were constructed and transfected into HepG2,Huh7 cell lines.The relative luciferase activity of each expression vector was assessed by the dual luciferase reporter gene assay system.Western blotting was used to detect SOCS3 protein expression in PBMCs from groups of patients with the rs4969170 AA and AG genotypes.The state of IR in eight patients was evaluated by determining their HOMA-IR. RESULTS: The pGL3-A, PGL3-G and pGL3-control vectors showed significantly different luciferase expression in the HepG2 cells (0.121 00 ± 0.022 07,0.027 00+/-0.012 49 and 0.043 33 ± 0.005 51; F =48.068, P=0.001) and in the Huh7 cell lines (0.164 70 ± 0.007 10,0.027 33 ± 0.017 04 and 0.033 67 ± 0.014 98; F =115.137, P=0.001). The expression of SOCS3 protein was significantly higher in the rs4969170 AA genotype group than in the AG genotype group (1.22 ± 0.40 vs. 0.30 ± 0.19; t =4.149, P=0.006).The IR index of patients with the rs4969170 AA genotype and the AG genotype was 4.11 ± 2.62 and 1.47 ± 1.01 respectively.There were three patients with IR in the rs4969170 AA genotype group and one in the rs4969170 AG group. There was no statistically significant difference between the two genotype groups (t=1.881, P=0.109). CONCLUSIONS: The SOCS3 rs4969170 A haplotype may enhance transcriptional activity of the gene promoter to regulate gene expression, thereby increasing intracellular SOCS3 protein level and ultimately interfering with insulin signaling and causing IR in patients with chronic hepatitis C.

Microplastic Has No Effect on Rice Yield and Gaseous N Emission from an Infertile Soil with High Inorganic N Inputs.

Microplastic might affect the crop yield, nitrogen (N) use efficiency and reactive N losses from agricultural soil systems. However, evaluation of these effects in infertile soil planted with different rice cultivars is lacking. We conducted a soil column experiment to determine the influence of a typical microplastic polyethylene (PE) input into an infertile soil with 270 kg N ha-1 and planted with two rice cultivars, i.e., a common rice Nangeng 5055 (NG) and a hybrid rice Jiafengyou 6 (JFY). The results showed that JFY produced a significantly (p < 0.05) greater grain yield than NG (61.6-66.2 vs. 48.2-52.5 g pot-1) but was not influenced by PE. Overall, PE hardly changed the N use efficiency of NG and JFY. Unexpectedly, PE significantly (p < 0.05) increased the total amino acid content of NG. Compared with JFY, NG volatilized significantly (p < 0.05) more ammonia (NH3) (0.84-0.92 vs. 0.64-0.67 g N pot-1) but emitted equal nitrous oxide (N2O). PE exerted no effect on either NH3 volatilization or the N2O emission flux pattern and cumulative losses of the rice growth cycle, whether with NG or JFY. Some properties of tested soils changed after planting with different rice cultivars and incorporating with microplastic. In conclusion, the rice production, N use efficiency, NH3 volatilization and N2O emission from the N-fertilized infertile soil were pronouncedly influenced by the rice cultivar, but not the PE. However, PE influenced the grain quality of common rice and some properties of tested soils with both rice cultivars.

Advances in biomimetic nanomaterial delivery systems: harnessing nature's inspiration for targeted drug delivery.

The properties of nanomaterials make them promising and advantageous for use in drug delivery systems, but challenges arise from the immune system's recognition of exogenous nanoparticles, leading to their clearance and reduced targeting efficiency. Drawing inspiration from nature, this paper explores biomimetic strategies to transform recognizable nanomaterials into a "camouflaged state." The focal point of this paper is the exploration of bionic nanoparticles, with a focus on cell membrane-coated nanoparticles. These biomimetic structures, particularly those mimicking red blood cells (RBCs), white blood cells (WBCs), platelets, and cancer cells, demonstrate enhanced drug delivery efficiency and prolonged circulation. This article underscores the versatility of these biomimetic structures across diverse diseases and explores the use of hybrid cell membrane-coated nanoparticles as a contemporary trend. This review also investigated exosomes and protein bionic nanoparticles, emphasizing their potential for specific targeting, immune evasion, and improved therapeutic outcomes. We expect that this continued development based on biomimetic nanomaterials will contribute to the efficiency and safety of disease treatment.

Rice straw biochar and lime regulate the availability of heavy metals by managing colloid-associated- but dissolved-heavy metals.

Heavy metal (HM) pollution has extensively spread in agricultural soils, posing potential threats to food safety and human health. Biochar and lime are two amendments used to remediate the soils contaminated with HMs. However, colloids have been shown to increase the mobility of HMs in paddy soils. Nevertheless, limited investigations have been made into the impact of biochar and lime on the formation of colloid-associated (colloidal) HMs in paddy soils. In this study, column and microcosm incubation experiments were conducted to examine how biochar and lime affected the availability of HMs (arsenic, cadmium, copper, iron, manganese, lead, and zinc) in different layers of paddy soils. The results revealed that biochar significantly inhibited the formation of colloidal HMs in the soil flooding phase, whereas the lime increased the colloidal HMs. These colloids containing HMs were identified as poorly dissolved metal sulfides. When the soil was drained, colloidal HMs transformed into dissolved forms, thereby improving the availability of HMs. Biochar decreased HM availability by reducing colloidal- but dissolved- HMs, whereas lime had the opposite effect. Hence, biochar demonstrated a stable and reliable remediation ability to decrease HM availability in paddy soil during flooding and drainage processes. In conclusion, this study highlighted that biochar efficiently reduced HM availability by mitigating the formation of colloidal HMs during flooding and their transformation into dissolved HMs during drainage in paddy soils.

Antibacterial and antioxidant bifunctional hydrogel based on hyaluronic acid complex MoS2-dithiothreitol nanozyme for treatment of infected wounds.

Wound repair is a complex physiological process that often leads to bacterial infections, which significantly threaten human health. Therefore, developing wound-healing materials that promote healing and prevent bacterial infections is crucial. In this study, the coordination interaction between sulfhydryl groups on dithiothreitol (DTT) and MoS2 nanosheets is investigated to synthesize a MoS2-DTT nanozyme with photothermal properties and an improved free-radical scavenging ability. Double-bond-modified hyaluronic acid is used as a monomer and is cross-linked with a PF127-DA agent. PHMoD is prepared in coordination with MoS2-DTT as the functional component. This hydrogel exhibits antioxidant and antibacterial properties, attributed to the catalytic activity of catalase-like enzymes and photothermal effects. Under the near-infrared (NIR), it exhibits potent antibacterial effects against gram-positive (Staphylococcus aureus) and gram-negative bacteria (Escherichia coli), achieving bactericidal rates of 99.76% and 99.42%, respectively. Furthermore, the hydrogel exhibits remarkable reactive oxygen species scavenging and antioxidant capabilities, effectively countering oxidative stress in L929 cells. Remarkably, in an animal model, wounds treated with the PHMoD(2.0) and NIR laser heal the fastest, sealing completely within 10 days. These results indicate the unique biocompatibility and bifunctionality of the PHMoD, which make it a promising material for wound-healing applications.

A synergistically antimicrobial and antioxidant hyaluronic acid hydrogel for infected wounds.

Bacterial infections during wound healing impede the healing process and trigger local or systemic inflammatory reactions. Consequently, there is an urgent need to develop a new material with antimicrobial and antioxidant properties to promote infected wound healing. A synergistically antimicrobial and antioxidant hyaluronic acid hydrogel (HMn) is prepared by employing MnO2 nanosheets into 4ARM-PEG5000-SH crosslinked methacrylated hyaluronic acid (HAMA) network. The coordination between sulfhydryl groups of 4ARM-PEG5000-SH and MnO2 nanosheets ensures entrapment of the nanosheets within the hydrogel, while the interaction between 4ARM-PEG5000-SH and HAMA results in facile gelation through thiol-ene click reaction. MnO2 nanosheets exhibit strong photothermal properties and reactive oxygen species (ROS) scavenging abilities, while hyaluronic acid promotes wound healing. When subjected to near-infrared (NIR) irradiation, the HMn achieves a bactericidal rate of 95.24 % for Staphylococcus aureus and nearly 100 % for Escherichia coli. In animal experiments, treatment with the HMn under NIR irradiation results in the best wound healing outcomes. Both in vitro and vivo biocompatible assays demonstrate that the HMn has rarely cell cytotoxicity and tissue damage. The HMn is easy to prepare and has good biocompatibility as well as efficient antibacterial and antioxidant properties, providing a novel method for the treatment of infected wounds.