Triple-Phase Photocatalytic H2O2 Production on a Janus Fiber Membrane with Asymmetric Hydrophobicity.

Photocatalytic O2 reduction is an intriguing approach to producing H2O2, but its efficiency is often hindered by the limited solubility and mass transfer of O2 in the aqueous phase. Here, we design and fabricate a two-layered (2L) Janus fiber membrane photocatalyst with asymmetric hydrophobicity for efficient photocatalytic H2O2 production. The top layer of the membrane consists of superhydrophobic polytetrafluoroethylene (PTFE) fibers with a dispersed modified carbon nitride (mCN) photocatalyst. Amphiphilic Nafion (Naf) ionomer is sprayed onto this layer to modulate the microenvironment and achieve moderate hydrophobicity. In contrast, the bottom layer consists of bare PTFE fibers with high hydrophobicity. The elaborate structural configuration and asymmetric hydrophobicity feature of the optimized membrane photocatalyst (designated as 2L-mCN/F-Naf; F, PTFE) allow most mCN to be exposed with gas-liquid-solid triple-phase interfaces and enable rapid mass transfer of gaseous O2 within the hierarchical membrane, thus increasing the local O2 concentration near the mCN photocatalyst. As a result, the optimized 2L-mCN/F-Naf membrane photocatalyst shows remarkable photocatalytic H2O2 production activity, achieving a rate of 5.38 mmol g-1 h-1 under visible light irradiation.

Low-Coordinated Conductive ZnCu Metal-Organic Frameworks for Highly Selective H2O2 Electrosynthesis.

Direct electrosynthesis of hydrogen peroxide (H2O2) with high production rate and high selectivity through the two-electron oxygen reduction reaction (2e-ORR) offers a sustainable alternative to the energy-intensive anthraquinone technology but remains a challenge. Herein, a low-coordinated, 2D conductive Zn/Cu metal-organic framework supported on hollow nanocube structures (ZnCu-MOF (H)) is rationally designed and synthesized. The as-prepared ZnCu-MOF (H) catalyst exhibits substantially boosted electrocatalytic kinetics, enhanced H2O2 selectivity, and ultra-high Faradaic efficiency for 2e-ORR process in both alkaline and neutral conditions. Electrochemical measurements, operando/quasi in situ spectroscopy, and theoretical calculation demonstrate that the introduction of Cu atoms with low-coordinated structures induces the transformation of active sites, resulting in the beneficial electron transfer and the optimized energy barrier, thereby improving the electrocatalytic activity and selectivity.

Single Zn Atoms with Acetate-Anion-Enabled Asymmetric Coordination for Efficient H2 O2 Photosynthesis.

Exploring unique single-atom sites capable of efficiently reducing O2 to H2 O2 while being inert to H2 O2 decomposition under light conditions is significant for H2 O2 photosynthesis, but it remains challenging. Herein, we report the facile design and fabrication of polymeric carbon nitride (CN) decorated with single-Zn sites that have tailorable local coordination environments, which is enabled by utilizing different Zn salt anions. Specifically, the O atom from acetate (OAc) anion participates in the coordination of single-Zn sites on CN, forming asymmetric Zn-N3 O moiety on CN (denoted as CN/Zn-OAc), in contrast to the obtained Zn-N4 sites when sulfate (SO4 ) is adopted (CN/Zn-SO4 ). Both experimental and theoretical investigations demonstrate that the Zn-N3 O moiety exhibits higher intrinsic activity for O2 reduction to H2 O2 than the Zn-N4 moiety. This is attributed to the asymmetric N/O coordination, which promotes the adsorption of O2 and the formation of the key intermediate *OOH on Zn sites due to their modulated electronic structure. Moreover, it is inactive for H2 O2 decomposition under both dark and light conditions. As a result, the optimized CN/Zn-OAc catalyst exhibits significantly improved photocatalytic H2 O2 production activity under visible light irradiation.

Atomically Dispersed Zincophilic Sites in N,P-Codoped Carbon Macroporous Fibers Enable Efficient Zn Metal Anodes.

Zn dendrite growth and undesired parasitic reactions severely restrict the practical use of deep-cycling Zn metal anodes (ZMAs). Herein, we demonstrate an elaborate design of atomically dispersed Cu and Zn sites anchored on N,P-codoped carbon macroporous fibers (denoted as Cu/Zn-N/P-CMFs) as a three-dimensional (3D) versatile host for efficient ZMAs in mildly acidic electrolyte. The 3D macroporous frameworks can alleviate the structural stress and suppress Zn dendrite growth by spatially homogenizing Zn2+ flux. Moreover, the well-dispersed Cu and Zn atoms anchored by N and P atoms maximize the utilization as abundant active nucleation sites for Zn plating. As expected, the Cu/Zn-N/P-CMFs host presents a low Zn nucleation overpotential, high reversibility, and dendrite-free Zn deposition. The Cu/Zn-N/P-CMFs-Zn electrode exhibits stable Zn plating/stripping with low polarization for 630 h at 2 mA cm-2 and 2 mAh cm-2. When coupled with a MnO2 cathode, the fabricated full cell also shows impressive cycling performance even when tested under harsh conditions.

Superhydrophobic and Conductive Wire Membrane for Enhanced CO2 Electroreduction to Multicarbon Products.

Gas-liquid-solid triple-phase interfaces (TPI) are essential for promoting electrochemical CO2 reduction, but it remains challenging to maximize their efficiency while integrating other desirable properties conducive to electrocatalysis. Herein, we report the elaborate design and fabrication of a superhydrophobic, conductive, and hierarchical wire membrane in which core-shell CuO nanospheres, carbon nanotubes (CNT), and polytetrafluoroethylene (PTFE) are integrated into a wire structure (designated as CuO/F/C(w); F, PTFE; C, CNT; w, wire) to maximize their respective functions. The realized architecture allows almost all CuO nanospheres to be exposed with effective TPI and good contact to conductive CNT, thus increasing the local CO2 concentration on the CuO surface and enabling fast electron/mass transfer. As a result, the CuO/F/C(w) membrane attains a Faradaic efficiency of 56.8 % and a partial current density of 68.9 mA cm-2 for multicarbon products at -1.4 V (versus the reversible hydrogen electrode) in the H-type cell, far exceeding 10.1 % and 13.4 mA cm-2 for bare CuO.

An Unlocked Two-Dimensional Conductive Zn-MOF on Polymeric Carbon Nitride for Photocatalytic H2 O2 Production.

Developing highly efficient catalytic sites for O2 reduction to H2 O2 , while ensuring the fast injection of energetic electrons into these sites, is crucial for artificial H2 O2 photosynthesis but remains challenging. Herein, we report a strongly coupled hybrid photocatalyst comprising polymeric carbon nitride (CN) and a two-dimensional conductive Zn-containing metal-organic framework (Zn-MOF) (denoted as CN/Zn-MOF(lc)/400; lc, low crystallinity; 400, annealing temperature in °C), in which the catalytic capability of Zn-MOF(lc) for H2 O2 production is unlocked by the annealing-induced effects. As revealed by experimental and theoretical calculation results, the Zn sites coordinated to four O (Zn-O4 ) in Zn-MOF(lc) are thermally activated to a relatively electron-rich state due to the annealing-induced local structure shrinkage, which favors the formation of a key *OOH intermediate of 2e- O2 reduction on these sites. Moreover, the annealing treatment facilitates the photoelectron migration from the CN photocatalyst to the Zn-MOF(lc) catalytic unit. As a result, the optimized catalyst exhibits dramatically enhanced H2 O2 production activity and excellent stability under visible light irradiation.

Bimetal-Organic Framework Nanoboxes Enable Accelerated Redox Kinetics and Polysulfide Trapping for Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries are considered as promising candidates for next-generation energy storage systems in view of the high theoretical energy density and low cost of sulfur resources. The suppression of polysulfide diffusion and promotion of redox kinetics are the main challenges for Li-S batteries. Herein, we design and prepare a novel type of ZnCo-based bimetallic metal-organic framework nanoboxes (ZnCo-MOF NBs) to serve as a functional sulfur host for Li-S batteries. The hollow architecture of ZnCo-MOF NBs can ensure fast charge transfer, improved sulfur utilization, and effective confinement of lithium polysulfides (LiPSs). The atomically dispersed Co-O4 sites in ZnCo-MOF NBs can firmly capture LiPSs and electrocatalytically accelerate their conversion kinetics. Benefiting from the multiple structural advantages, the ZnCo-MOF/S cathode shows high reversible capacity, impressive rate capability, and prolonged cycling performance for 300 cycles.

Zincophilic Interfacial Manipulation against Dendrite Growth and Side Reactions for Stable Zn Metal Anodes.

Constructing multifunctional interphases to suppress the rampant Zn dendrite growth and detrimental side reactions is crucial for Zn anodes. Herein, a phytic acid (PA)-ZnAl coordination compound is demonstrated as a versatile interphase layer to stabilize Zn anodes. The zincophilic PA-ZnAl layer can manipulate Zn2+ flux and promote rapid desolvation kinetics, ensuring the uniform Zn deposition with dendrite-free morphology. Moreover, the robust PA-ZnAl protective layer can effectively inhibit the hydrogen evolution reaction and formation of byproducts, further contributing to the reversible Zn plating/stripping with high Coulombic efficiency. As a result, the Zn@PA-ZnAl electrode shows a lower Zn nucleation overpotential and higher Zn2+ transference number compared with bare Zn. The Zn@PA-ZnAl symmetric cell exhibits a prolonged lifespan of 650 h tested at 5 mA cm-2 and 5 mAh cm-2 . Furthermore, the assembled Zn battery full cell based on this Zn@PA-ZnAl anode also delivers decent cycling stability even under harsh conditions.

Single-Atom Zinc Sites with Synergetic Multiple Coordination Shells for Electrochemical H2 O2 Production.

Precise manipulation of the coordination environment of single-atom catalysts (SACs), particularly the simultaneous engineering of multiple coordination shells, is crucial to maximize their catalytic performance but remains challenging. Herein, we present a general two-step strategy to fabricate a series of hollow carbon-based SACs featuring asymmetric Zn-N2 O2 moieties simultaneously modulated with S atoms in higher coordination shells of Zn centers (n≥2; designated as Zn-N2 O2 -S). Systematic analyses demonstrate that the synergetic effects between the N2 O2 species in the first coordination shell and the S atoms in higher coordination shells lead to robust discrete Zn sites with the optimal electronic structure for selective O2 reduction to H2 O2 . Remarkably, the Zn-N2 O2 moiety with S atoms in the second coordination shell possesses a nearly ideal Gibbs free energy for the key OOH* intermediate, which favors the formation and desorption of OOH* on Zn sites for H2 O2 generation. Consequently, the Zn-N2 O2 -S SAC exhibits impressive electrochemical H2 O2 production performance with high selectivity of 96 %. Even at a high current density of 80 mA cm-2 in the flow cell, it shows a high H2 O2 production rate of 6.924 mol gcat -1 h-1 with an average Faradaic efficiency of 93.1 %, and excellent durability over 65 h.

Pre-intercalation of Ammonium Ions in Layered δ-MnO2 Nanosheets for High-Performance Aqueous Zinc-Ion Batteries.

Layered manganese dioxide is a promising cathode candidate for aqueous Zn-ion batteries. However, the narrow interlayer spacing, inferior intrinsic electronic conductivity and poor structural stability still limit its practical application. Herein, we report a two-step strategy to incorporate ammonium ions into manganese dioxide (named as AMO) nanosheets as a cathode for boosted Zn ion storage. K+ -intercalated δ-MnO2 nanosheets (KMO) grown on carbon cloth are chosen as the self-involved precursor. Of note, ammonium ions could replace K+ ions via a facile hydrothermal reaction to enlarge the lattice space and form hydrogen-bond networks. Compared with KMO, the structural stability and the ion transfer kinetics of the layered AMO are enhanced. As expected, the obtained AMO cathode exhibits remarkable electrochemical properties in terms of high reversible capacity, decent rate performance and superior cycling stability over 10000 cycles.

Metal-Organic Frameworks Derived Functional Materials for Electrochemical Energy Storage and Conversion: A Mini Review.

With many apparent advantages including high surface area, tunable pore sizes and topologies, and diverse periodic organic-inorganic ingredients, metal-organic frameworks (MOFs) have been identified as versatile precursors or sacrificial templates for preparing functional materials as advanced electrodes or high-efficiency catalysts for electrochemical energy storage and conversion (EESC). In this Mini Review, we first briefly summarize the material design strategies to show the rich possibilities of the chemical compositions and physical structures of MOFs derivatives. We next highlight the latest advances focusing on the composition/structure/performance relationship and discuss their practical applications in various EESC systems, such as supercapacitors, rechargeable batteries, fuel cells, water electrolyzers, and carbon dioxide/nitrogen reduction reactions. Finally, we provide some of our own insights into the major challenges and prospective solutions of MOF-derived functional materials for EESC, hoping to shed some light on the future development of this highly exciting field.

Synthesis of N-Doped Highly Graphitic Carbon Urchin-Like Hollow Structures Loaded with Single-Ni Atoms towards Efficient CO2 Electroreduction.

The rational design of single-atom catalysts featuring excellent conductivity, highly accessible discrete active sites and favorable mass transfer is crucial for electrocatalysis but remains challenging. In this study, a reliable Ni-catalyzed and Ni-templated strategy is developed to synthesize a single-atom catalyst by transforming metallic Ni into single-Ni atoms anchored on hollow porous urchin-like (HPU) N-doped carbon (NC) (designated as Ni-NC(HPU)), which possesses high crystallinity and sufficient Ni-N4 moiety (2.4 wt %). The unique hollow thorns on the surface, good conductivity and large external surface area facilitate electron/mass transfer and exposure of single-Ni sites. As a result, the Ni-NC(HPU) catalyst exhibits remarkable activity and high stability for CO2 electroreduction. Moreover, this synthetic strategy can also be facilely extended to prepare distinct hollow porous architectures with similar components, such as the wire- and sphere-like ones.

Formation of CuMn Prussian Blue Analog Double-Shelled Nanoboxes Toward Long-Life Zn-ion Batteries.

Prussian blue analogs (PBAs) are promising candidates for aqueous Zn-ion batteries due to their unique open-framework structures. However, they suffer from limited capacity and severe capacity decay originating from insufficient redox sites and structural instability. Herein, Cu-substituted Mn-PBA double-shelled nanoboxes (CuMn-PBA DSNBs) prepared by tannic acid etching and cation exchange approaches are demonstrated for efficient Zn ion storage. The unique hollow structures can expose abundant active sites and alleviate the volume change during the cycling test. Moreover, partial Cu substitution and induced Mn vacancies might inhibit the Jahn-Teller distortions of Mn-N6 octahedra, thus contributing to the prolonged lifespan. As a result, CuMn-PBA DSNBs exhibit high reversible capacity, decent rate performance and superior cycling stability for 2000 cycles. Furthermore, ex situ characterizations reveal that the charge storage mechanism of CuMn-PBA DSNBs mainly involves the reversible redox reactions of transition metals and Zn2+ ion insertion/extraction processes.

Construction of Ni-Co-Fe Hydr(oxy)oxide@Ni-Co Layered Double Hydroxide Yolk-Shelled Microrods for Enhanced Oxygen Evolution.

The exploration of earth-abundant and efficient electrocatalysts toward the oxygen evolution reaction (OER) is critical for sustainable energy storage and conversion devices. In this work, we report a self-engaged strategy to fabricate a yolk-shelled OER electrocatalyst. Starting with a metal-organic framework, Co-Fe layered double hydroxide (LDH)@zeolitic imidazolate framework-67 (ZIF-67) yolk-shelled structures are formed in one step. Afterwards, these ZIF-67 building blocks are transformed into Ni-Co LDH nanocages to form the Ni-Co-Fe hydr(oxy)oxide@Ni-Co LDH yolk-shelled microrods (NiCoFe-HO@NiCo-LDH YSMRs) through an ion-exchange reaction. Owing to the structural and compositional merits, the NiCoFe-HO@NiCo-LDH YSMR electrocatalyst exhibits an overpotential of 278 mV to reach the current density of 10 mA cm-2 , a small Tafel slope of 49.7 mV dec-1 , and good stability in alkaline media.

Surface-Exposed Single-Ni Atoms with Potential-Driven Dynamic Behaviors for Highly Efficient Electrocatalytic Oxygen Evolution.

Trapping the active sites on the exterior surface of hollow supports can reduce mass transfer resistance and enhance atomic utilization. Herein, we report a facile chemical vapor deposition strategy to synthesize single-Ni atoms decorated hollow S/N-doped football-like carbon spheres (Ni SAs@S/N-FCS). Specifically, the CdS@3-aminophenol/formaldehyde is carbonized into S/N-FCS. The gas-migrated Ni species are anchored on the surface of S/N-FCS simultaneously, yielding Ni SAs@S/N-FCS. The obtained catalyst exhibits outstanding performance for alkaline oxygen evolution reaction (OER) with an overpotential of 249 mV at 10 mA cm-2 , a small Tafel slope of 56.5 mV dec-1 , and ultra-long stability up to 166 hours without obvious fading. Moreover, the potential-driven dynamic behaviors of Ni-N4 sites and the contribution of the S dopant at different locations in the matrix to the OER activity are revealed by the operando X-ray absorption spectroscopy and theoretical calculations, respectively.

Mesoporous N-rich Carbon with Single-Ni Atoms as a Multifunctional Sulfur Host for Li-S Batteries.

Physicochemical confinement and catalytic conversion of lithium polysulfides (LiPSs) are crucial to suppress the shuttle effect and enhance the redox kinetics of lithium-sulfur (Li-S) batteries. In this study, a NH4 Cl-assisted pyrolysis strategy is developed to fabricate highly mesoporous N-rich carbon (designed as NC(p)) featuring thin outer shells and porous inner networks, on which single-Ni atoms are anchored to form an excellent sulfur host (designed as Ni-NC(p)) for Li-S batteries. During pyrolysis, the pyrolytic HCl from confined NH4 Cl within ZIF-8 will in situ etch ZIF-8 to produce rich mesoporous in the carbonized product NC(p). The mesoporous Ni-NC(p) enables favorable electron/ion transfer, high sulfur loading, and effective confinement of LiPSs, while the catalytic effect of single-Ni species enhances the redox kinetics of LiPSs. As a result, the sulfur cathode based on the Ni-NC(p) host delivers obviously improved Li-S battery performance with high specific capacity, good rate capability, and cycling stability.

Highly Efficient Electrocatalytic Oxygen Evolution Over Atomically Dispersed Synergistic Ni/Co Dual Sites.

Single-atom catalysts (SACs) are being pursued as economical electrocatalysts. However, their low active-site loading, poor interactions, and unclear catalytic mechanism call for significant advances. Herein, atomically dispersed Ni/Co dual sites anchored on nitrogen-doped carbon (a-NiCo/NC) hollow prisms are rationally designed and synthesized. Benefiting from the atomically dispersed dual-metal sites and their synergistic interactions, the obtained a-NiCo/NC sample exhibits superior electrocatalytic activity and kinetics towards the oxygen evolution reaction. Moreover, density functional theory calculations indicate that the strong synergistic interactions from heteronuclear paired Ni/Co dual sites lead to the optimization of the electronic structure and the reduced reaction energy barrier. This work provides a promising strategy for the synthesis of high-efficiency atomically dispersed dual-site SACs in the field of electrochemical energy storage and conversion.

Formation of Super-Assembled TiOx /Zn/N-Doped Carbon Inverse Opal Towards Dendrite-Free Zn Anodes.

Uncontrolled growth of Zn dendrites and side reactions are the major restrictions for the commercialization of Zn metal anodes. Herein, we develop a TiOx /Zn/N-doped carbon inverse opal (denoted as TZNC IO) host to regulate the Zn deposition. Amorphous TiOx and Zn/N-doped carbon can serve as the zincophilic nucleation sites to prevent the parasitic reactions. More importantly, the highly ordered IO host homogenizes the local current density and electric field to stabilize Zn deposition. Furthermore, the three-dimensional open networks could regulate Zn ion flux to enable stable cycling performance at large current densities. Owing to the abundant zincophilic sites and the open structure, granular Zn deposits could be realized. As expected, the TZNC IO host guarantees the steady Zn plating/stripping with a long-term stability over 450 h at the current density of 1 mA cm-2 . As a proof-of-concept demonstration, a TZNC@Zn||V2 O5 full cell shows long lifespan over 2000 cycles at 5.0 A g-1 .

Atomically Dispersed Reactive Centers for Electrocatalytic CO2 Reduction and Water Splitting.

Developing electrocatalytic energy conversion technologies for replacing the traditional energy source is highly expected to resolve the fossil fuel exhaustion and related environmental problems. Exploring stable and high-efficiency electrocatalysts is of vital importance for the promotion of these technologies. Single-atom catalysts (SACs), with atomically distributed active sites on supports, perform as emerging materials in catalysis and present promising prospects for a wide range of applications. The rationally designed near-range coordination environment, long-range electronic interaction and microenvironment of the coordination sphere cast huge influence on the reaction mechanism and related catalytic performance of SACs. In the current Review, some recent developments of atomically dispersed reactive centers for electrocatalytic CO2 reduction and water splitting are well summarized. The catalytic mechanism and the underlying structure-activity relationship are elaborated based on the recent progresses of various operando investigations. Finally, by highlighting the challenges and prospects for the development of single-atom catalysis, we hope to shed some light on the future research of SACs for the electrocatalytic energy conversion.

Rational Design and Engineering of One-Dimensional Hollow Nanostructures for Efficient Electrochemical Energy Storage.

The unique structural characteristics of one-dimensional (1D) hollow nanostructures result in intriguing physicochemical properties and wide applications, especially for electrochemical energy storage applications. In this Minireview, we give an overview of recent developments in the rational design and engineering of various kinds of 1D hollow nanostructures with well-designed architectures, structural/compositional complexity, controllable morphologies, and enhanced electrochemical properties for different kinds of electrochemical energy storage applications (i.e. lithium-ion batteries, sodium-ion batteries, lithium-sulfur batteries, lithium-selenium sulfur batteries, lithium metal anodes, metal-air batteries, supercapacitors). We conclude with prospects on some critical challenges and possible future research directions in this field. It is anticipated that further innovative studies on the structural and compositional design of functional 1D nanostructured electrodes for energy storage applications will be stimulated.