Screening of fatty acids, saccharides, and phytochemicals in Jatropha curcas seed kernel as their trimethylsilyl derivatives using gas chromatography/mass spectrometry.

Jatropha curcas is a multipurpose plant, of which the seed kernel oil (up to 60% content) has been exploited for BDF production. In this report, we explored the various kinds of minor compounds of saccharides, phytochemicals, fatty acids (FAs), and amino acids in the seed kernel using gas chromatography/mass spectrometry (GC/MS) as their trimethylsilyl (TMS) derivatives. The homogenized seed kernels were extracted with methanol, and the extract was distributed into ethyl acetate/water phase. The components of each layer were derivatized with N, O-bis (trimethylsilyl) trifluoroacetamide (BSTFA) and their TMS derivatives were screened by GC/MS analysis. In ethyl acetate layer, the four FAs of palmitic acid, oleic acid, linoleic acid, and stearic acid were identified with total content of 12 wt% in kernel. In addition, the two tocochromanols of γ-tocopherol and γ-tocotrienol, and three phytosterols of campesterol, stigmasterol, and ß-sitosterol were also identified. Meanwhile, as the main saccharide components, di-saccharide of sucrose with content of 3 wt% in kernel, tri-saccharide of raffinose, and sugar alcohol of sorbitol and myo-inositol, were identified in aqueous layer. Furthermore, metabolites of amino acid, and a series of metabolite were also identified. These results suggested that the Jatropha curcas seed kernel can be applied to cascade use for metallic soap, liquid fuel, food and medical supplement, and cosmetics in addition to biodiesel production.

Production of Biodiesel from Candlenut Oil Using a Two-step Co-solvent Method and Evaluation of Its Gaseous Emissions.

Candlenut oil (CNO) is a potentially new feedstock for biodiesel (BDF) production. In this paper, a two-step co-solvent method for BDF production from CNO was examined. Firstly, esterification of free fatty acids (FFAs) (7 wt%) present in CNO was carried out using a co-solvent of acetonitrile (30 wt%) and H2SO4 as a catalyst. The content of FFAs was reduced to 0.8 wt% in 1 h at 65°C. Subsequent transesterification of the crude oil produced was carried out using a co-solvent of acetone (20 wt%) and 1 wt% potassium hydroxide (KOH). Ester content of 99.3% was obtained at 40°C in 45 min. The water content in BDF was 0.023% upon purification using vacuum distillation at 5 kPa. The components of CNO BDF were characterized using a Fourier-transform infrared spectrometry and gas chromatography-flame ionization detector. The physicochemical properties of BDF satisfied the ASTM D6751-02 standard. The gaseous exhaust emissions from the diesel engine upon combustion of the BDF blends (B0-B100) with petrodiesel were examined. The emissions of carbon monoxide and hydrocarbons were clearly lower, but that of nitrogen oxides was higher in comparison to those from petro-diesel.

Production of biodiesel from Vietnamese Jatropha curcas oil by a co-solvent method.

Biodiesel fuels (BDFs) was successfully produced from Vietnamese Jatropha curcas oil with high content of free fatty acids (FFAs) in two stages. In the first stage, the esterification process was carried out with the optimal conditions as follows; a methanol-to-FFAs molar ratio of 6:1, 1 wt% H2SO4, at a temperature of 65 °C, and using 30% (wt/wt) acetonitrile as co-solvent. This step reduced the concentration of FFAs in the reaction mixture from 15.93 to 2 wt% in 60 min. In the second stage, the transesterification process generated fatty acid methyl esters (FAMEs) with 99% efficiency was performed in 30 min with the optimal conditions as follows; a methanol-to-oil molar ratio of 6:1, 1 wt% KOH, at a temperature of 40 °C, and 20% (wt/wt) acetone as co-solvent. The produced biodiesel quality meets the standards JIS K2390 and EN 14214 regarding FAME yield, FFAs and water contents.