High-Efficiency and Stable Colloidal One-Dimensional Core/Shell Nanorod Light-Emitting Diodes.

Anisotropic nanocrystals such as nanorods (NRs) display unique linearly polarized emission, which is expected to break the external quantum efficiency (EQE) limit of quantum dot-based light-emitting diodes (LEDs). However, the progress in achieving a higher EQE using NRs encounters several challenges, primarily involving a low photoluminescence quantum yield (PLQY) of NRs and imbalanced charge injection in NR-LEDs. In this work, we investigated NR-LEDs based on CdSe/CdZnS/ZnS rod-in-rod NRs with a high PLQY and higher linear polarization compared to those of dot-in-rod NRs. The balanced charge injection is achieved using ZnMgO nanoparticles as the electron transport layer and poly-TPD {poly[N,N'-bis(4-butylphenyl)-N,N'-bis(phenyl)benzidine]} as the hole transport layer. Therefore, the NR-LEDs exhibit a maximum EQE of 21.5% and a maximum luminance of >120 000 cd/m2 owing to the high level of in-plane transitions with a dipole moment of 90%. The NR-LEDs also have greatly inhibited droop in EQE under a high current density as well as outstanding operation lifetime and cycle stability.

A Robust Anti-Thermal-Quenching Phosphor Based on Zero-Dimensional Metal Halide Rb3InCl6:xSb3.

High-power phosphor-converted white light-emitting diodes (hp-WLEDs) have been widely involved in modern society as outdoor lighting sources. In these devices, due to the Joule effect, the high applied currents cause high operation temperatures (>500 K). Under these conditions, most phosphors lose their emission, an effect known as thermal quenching (TQ). Here, we introduce a zero-dimensional (0D) metal halide, Rb3InCl6:xSb3+, as a suitable anti-TQ phosphor offering robust anti-TQ behavior up to 500 K. We ascribe this behavior of the metal halide to two factors: (1) a compensation process via thermally activated energy transfer from structural defects to emissive centers and (2) an intrinsic structural rigidity of the isolated octahedra in the 0D structure. The anti-TQ phosphor-based WLEDs can stably work at a current of 2000 mA. The low synthesis cost and nontoxic composition reported here can herald a new generation of anti-TQ phosphors for hp-WLED.

Surface Chemistry of Lead Halide Perovskite Colloidal Nanocrystals.

ConspectusThe surface chemistry of lead halide perovskite nanocrystals (NCs) plays a major role in dictating their colloidal and structural stability as well as governing their optical properties. A deep understanding of the nature of the ligand shell, ligand-NC, and ligand-solvent interactions is therefore of utmost importance. Our recent studies have revealed that such knowledge can be harnessed following a multidisciplinary approach comprising chemical, structural, and spectroscopic analyses coupled with atomistic modeling. We show that specific surface terminations can be produced only by employing flexible and versatile syntheses that enable to work under desired conditions. In this Account, we first describe our studies aimed at synthesizing CsPbBr3 NCs with various surface terminations. These include CsPbBr3 NCs prepared under Br- and oleylamine-rich conditions, which feature a ligand shell composed of alkylammonium-Br species and a photoluminescence quantum yield (PLQY) of ∼90%. On the other hand, taking advantage of the inability of secondary amines to bind to the perovskite NCs surface, we could prepare cuboidal CsPbBr3 NCs bearing a Cs-oleate surface termination and a PLQY of 70% by employing oleic acid and secondary alkylamines. In the quest to identify ligands that can bind more strongly than oleates or primary alkylammonium ions to the surface of NCs already in the synthesis step, we used phosphonic acids as the sole ligands in the CsPbBr3 NCs synthesis, which yielded NCs with a truncated octahedron shape, high PLQY (∼100%), and a PbBr2-terminated surface passivated by hydrogen phosphonates and phosphonic acid anhydride. The surface chemistry and the stability of perovskite NCs were investigated via ad-hoc postsynthesis treatments. We found, for example, that reacting oleylammonium-Br-terminated NCs with stoichiometric amounts of neutral primary alkylamines (or their conjugated acids) led to a partial replacement of oleylammonium ions with new alkylammonium ions (following a deprotonation/protonation mechanism), which resulted in a boost of the PLQY (up to 100%) and of the NCs' colloidal stability. Similar results in terms of optical properties were achieved by treating Cs-oleate-terminated NCs with alkylammonium-carboxylate or quaternary ammonium-Br (namely, didodecyldimethylammonium-Br, DDA-Br) couples. Interestingly, when the native NCs are ligand exchanged with DDA-Br, the ligand shell is then composed of species not bearing any proton. This, in turn, enabled us to study the interaction of such NCs with a variety of ligands under completely aprotic conditions wherein these DDA-Br-capped NCs were basically inert. The only exceptions were carboxylic, phosphonic, and sulfonic acids that were capable of stripping surface DDA-Br couples. As a note, most studies on CsPbBr3 NCs to date have focused primarily on choosing ligands with specific anchoring groups rather than on tuning the length and type of alkyl chains, as this is time-consuming and requires a large number of syntheses. Our recent developments in the computational chemistry of colloidal NCs are expected to provide a pivotal role in this direction since they can be integrated with machine learning models to investigate with greater details the ligand-NC, ligand-ligand, and ligand-solvent interactions and ultimately find optimal candidates through the prediction of surfactant properties using high-throughput data sets.

Collective Diffraction Effects in Perovskite Nanocrystal Superlattices.

ConspectusFor almost a decade now, lead halide perovskite nanocrystals have been the subject of a steadily growing number of publications, most of them regarding CsPbBr3 nanocubes. Many of these works report X-ray diffraction patterns where the first Bragg peak has an unusual shape, as if it was composed of two or more overlapping peaks. However, these peaks are too narrow to stem from a nanoparticle, and the perovskite crystal structure does not account for their formation. What is the origin of such an unusual profile, and why has it been overlooked so far? Our attempts to answer these questions led us to revisit an intriguing collective diffraction phenomenon, known for multilayer epitaxial thin films but not reported for colloidal nanocrystals before. By analogy, we call it the multilayer diffraction effect.Multilayer diffraction can be observed when a diffraction experiment is performed on nanocrystals packed with a periodic arrangement. Owing to the periodicity of the packing, the X-rays scattered by each particle interfere with those diffracted by its neighbors, creating fringes of constructive interference. Since the interfering radiation comes from nanoparticles, fringes are visible only where the particles themselves produce a signal in their diffraction pattern: for nanocrystals, this means at their Bragg peaks. Being a collective interference phenomenon, multilayer diffraction is strongly affected by the degree of order in the nanocrystal aggregate. For it to be observed, the majority of nanocrystals within the sample must abide to the stacking periodicity with minimal misplacements, a condition that is typically satisfied in self-assembled nanocrystal superlattices or stacks of colloidal nanoplatelets.A qualitative understanding of multilayer diffraction might explain why the first Bragg peak of CsPbBr3 nanocubes sometimes appears split, but leaves many other questions unanswered. For example, why is the split observed only at the first Bragg peak but not at the second? Why is it observed routinely in a variety of CsPbBr3 nanocrystals samples and not just in highly ordered superlattices? How does the morphology of particles (i.e., nanocrystals vs nanoplatelets) affect the appearance of multilayer diffraction effects? Finally, why is multilayer diffraction not observed in other popular nanocrystals such as Au and CdSe, despite the extensive investigations of their superlattices?Answering these questions requires a deeper understanding of multilayer diffraction. In what follows, we summarize our progress in rationalizing the origin of this phenomenon, at first through empirical observation and then by adapting the diffraction theory developed in the past for multilayer thin films, until we achieved a quantitative fitting of experimental diffraction patterns over extended angular ranges. By introducing the reader to the key advancements in our research, we provide answers to the questions above, we discuss what information can be extracted from patterns exhibiting collective interference effects, and we show how multilayer diffraction can provide insights into colloidal nanomaterials where other techniques struggle. Finally, with the help of literature patterns showing multilayer diffraction and simulations performed by us, we demonstrate that this collective diffraction effect is within reach for many appealing nanomaterials other than halide perovskites.

Exciton-photocarrier interference in mixed lead-halide-perovskite nanocrystals.

The use of semiconductor nanocrystals in scalable quantum technologies requires characterization of the exciton coherence dynamics in an ensemble of electronically isolated crystals in which system-bath interactions are nevertheless strong. In this communication, we identify signatures of Fano-like interference between excitons and photocarriers in the coherent two-dimensional photoluminescence excitation spectral lineshapes of mixed lead-halide perovskite nanocrystals in dilute solution. Specifically, by tuning the femtosecond-pulse spectrum, we show such interference in an intermediate coupling regime, which is evident in the coherent lineshape when simultaneously exciting the exciton and the free-carrier band at higher energy. We conclude that this interference is an intrinsic effect that will be consequential in the quantum dynamics of the system and will thus dictate decoherence dynamics, with consequences in their application in quantum technologies.

The Bright and Enlightening Science of Quantum Dots.

The 2023 Nobel Prize in Chemistry was awarded to Alexei Ekimov, Louis Brus, and Moungi Bawendi for the discovery and development of quantum dots, an area of research ripe with exciting results in terms of both fundamental science and present and forthcoming applications. Quantum dots, with their colors and their intriguing properties, have fascinated and engaged generations of scientists over the last 40 years, including myself. I present here a brief historical perspective of the field, from my personal standpoint and with insights from my own career, along with an outlook on what I believe will be the most interesting future developments in the field.

Ultrastable and High-Efficiency Deep Red QLEDs through Giant Continuously Graded Colloidal Quantum Dots with Shell Engineering.

Quantum dot (QD) based light-emitting diodes (QLEDs) hold great promise for next-generation lighting and displays. In order to reach a wide color gamut, deep red QLEDs emitting at wavelengths beyond 630 nm are highly desirable but have rarely been reported. Here, we synthesized deep red emitting ZnCdSe/ZnSeS QDs (diameter ∼16 nm) with a continuous gradient bialloyed core-shell structure. These QDs exhibit high quantum yield, excellent stability, and a reduced hole injection barrier. The QLEDs based on ZnCdSe/ZnSeS QDs have an external quantum efficiency above 20% in the luminance range of 200-90000 cd m-2 and a record T95 operation lifetime (time for the luminance to decrease to 95% of its initial value) of more than 20000 h at a luminance of 1000 cd m-2. Furthermore, the ZnCdSe/ZnSeS QLEDs have outstanding shelf stability (>100 days) and cycle stability (>10 cycles). The reported QLEDs with excellent stability and durability can accelerate the pace of QLED applications.

Facet-Defect Tolerant Bi-Doped Cs2AgxNa1-xInCl6 Nanoplatelets with a Near-Unity Photoluminescence Quantum Yield.

We report the colloidal synthesis of Bi-doped Cs2AgxNa1-xInCl6 double perovskite nanoplatelets (NPLs) exhibiting a near-unity photoluminescence quantum yield (PLQY), a record emission efficiency for nanoscale lead-free metal halides. A combination of optical spectroscopies revealed that nonradiative decay processes in the NPL were suppressed, indicating a well-passivated surface. By comparison, nanocubes with the same composition and surface ligands as the NPLs had a PLQY of only 40%. According to our calculations, the type of trap states arising from the presence of surface defects depends on their specific location: defects located on the facets of nanocubes generate only shallow traps, while those at the edges result in deep traps. In NPLs, due to their extended basal facets, most of the surface defects are facet defects. This so-called facet-defect tolerant behavior of double perovskites explains the more efficient optical emission of NPLs compared to that of nanocubes.

Halide Perovskite Artificial Solids as a New Platform to Simulate Collective Phenomena in Doped Mott Insulators.

The development of quantum simulators, artificial platforms where the predictions of many-body theories of correlated quantum materials can be tested in a controllable and tunable way, is one of the main challenges of condensed matter physics. Here we introduce artificial lattices made of lead halide perovskite nanocubes as a new platform to simulate and investigate the physics of correlated quantum materials. We demonstrate that optical injection of quantum confined excitons in this system realizes the two main features that ubiquitously pervade the phase diagram of many quantum materials: collective phenomena, in which long-range orders emerge from incoherent fluctuations, and the excitonic Mott transition, which has one-to-one correspondence with the insulator-to-metal transition described by the repulsive Hubbard model in a magnetic field. Our results demonstrate that time-resolved experiments provide a quantum simulator that is able to span a parameter range relevant for a broad class of phenomena, such as superconductivity and charge-density waves.

CsPbCl3 → CsPbI3 Exchange in Perovskite Nanocrystals Proceeds through a Jump-the-Gap Reaction Mechanism.

Halide exchange is a popular strategy to tune the properties of CsPbX3 nanocrystals after synthesis. However, while Cl → Br and Br → I exchanges proceed through the formation of stable mixed-halide nanocrystals, the Cl ⇌ I exchange is more elusive. Indeed, the large size difference between chloride and iodide ions causes a miscibility gap in the CsPbCl3-CsPbI3 system, preventing the isolation of stable CsPb(ClxI1-x)3 nanocrystals. Yet, previous works have claimed that a full CsPbCl3 → CsPbI3 exchange can be achieved. Even more interestingly, interrupting the exchange prematurely yields a mixture of CsPbCl3 and CsPbI3 nanocrystals that coexist without undergoing further transformation. Here, we investigate the reaction mechanism of CsPbCl3 → CsPbI3 exchange in nanocrystals. We show that the reaction proceeds through the early formation of iodide-doped CsPbCl3 nanocrystals covered by a monolayer shell of CsI. These nanocrystals then leap over the miscibility gap between CsPbCl3 and CsPbI3 by briefly transitioning to short-lived and nonrecoverable CsPb(ClxI1-x)3 nanocrystals, which quickly expel the excess chloride and turn into the chloride-doped CsPbI3 nanocrystals found in the final product.

Colloidal InAs Tetrapods: Impact of Surfactants on the Shape Control.

We have approached the synthesis of colloidal InAs nanocrystals (NCs) using amino-As and ligands that are different from the commonly employed oleylamine (OA). We found that carboxylic and phosphonic acids led only to oxides, whereas tri-n-octylphosphine, dioctylamine, or trioctylamine (TOA), when employed as the sole ligands, yielded InAs NCs with irregular sizes and a broad size distribution. Instead, various combinations of TOA and OA delivered InAs NCs with good control over the size distribution, and the TOA:OA volume ratio of 4:1 generated InAs tetrapods with arm length of 5-6 nm. Contrary to tetrapods of II-VI materials, which have a zinc-blende core and wurtzite arms, these NCs are entirely zinc-blende, with arms growing along the ⟨111⟩ directions. They feature a narrow excitonic peak at ∼950 nm in absorption and a weak photoluminescence emission at 1050 nm. Our calculations indicated that the bandgap of the InAs tetrapods is mainly governed by the size of their core and not by their arm lengths when these are longer than ∼3 nm. Nuclear magnetic resonance analyses revealed that InAs tetrapods are mostly passivated by OA with only a minor fraction of TOA. Molecular dynamics simulations showed that OA strongly binds to the (111) facets whereas TOA weakly binds to the edges and corners of the NCs and their combined use (at high TOA:OA volume ratios) promotes growth along the ⟨111⟩ directions, eventually forming tetrapods. Our work highlights the use of mixtures of ligands as a means of improving control over InAs NCs size and size distribution.

Ru-Cu Nanoheterostructures for Efficient Hydrogen Evolution Reaction in Alkaline Water Electrolyzers.

Combining multiple species working in tandem for different hydrogen evolution reaction (HER) steps is an effective strategy to design HER electrocatalysts. Here, we engineered a hierarchical electrode for the HER composed of amorphous-TiO2/Cu nanorods (NRs) decorated with cost-effective Ru-Cu nanoheterostructures (Ru mass loading = 52 µg/cm2). Such an electrode exhibits a stable, over 250 h, low overpotential of 74 mV at -200 mA/cm2 for the HER in 1 M NaOH. The high activity of the electrode is attributed, by structural analysis, operando X-ray absorption spectroscopy, and first-principles simulations, to synergistic functionalities: (1) mechanically robust, vertically aligned Cu NRs with high electrical conductivity and porosity provide fast charge and gas transfer channels; (2) the Ru electronic structure, regulated by the size of Cu clusters at the surface, facilitates the water dissociation (Volmer step); (3) the Cu clusters grown atop Ru exhibit a close-to-zero Gibbs free energy of the hydrogen adsorption, promoting fast Heyrovsky/Tafel steps. An alkaline electrolyzer (AEL) coupling the proposed cathode and a stainless-steel anode can stably operate in both continuous (1 A/cm2 for over 200 h) and intermittent modes (accelerated stress tests). A techno-economic analysis predicts the minimal overall hydrogen production cost of US$2.12/kg in a 1 MW AEL plant of 30 year lifetime based on our AEL single cell, hitting the worldwide targets (US$2-2.5/kgH2).

Indium arsenide quantum dots: an alternative to lead-based infrared emitting nanomaterials.

Colloidal quantum dots (QDs) emitting in the infrared (IR) are promising building blocks for numerous photonic, optoelectronic and biomedical applications owing to their low-cost solution-processability and tunable emission. Among them, lead- and mercury-based QDs are currently the most developed materials. Yet, due to toxicity issues, the scientific community is focusing on safer alternatives. In this regard, indium arsenide (InAs) QDs are one of the best candidates as they can absorb and emit light in the whole near infrared spectral range and they are RoHS-compliant, with recent trends suggesting that there is a renewed interest in this class of materials. This review focuses on colloidal InAs QDs and aims to provide an up-to-date overview spanning from their synthesis and surface chemistry to post-synthesis modifications. We provide a comprehensive overview from initial synthetic methods to the most recent developments on the ability to control the size, size distribution, electronic properties and carrier dynamics. Then, we describe doping and alloying strategies applied to InAs QDs as well as InAs based heterostructures. Furthermore, we present the state-of-the-art applications of InAs QDs, with a particular focus on bioimaging and field effect transistors. Finally, we discuss open challenges and future perspectives.

Alloying Bi-Doped Cs2Ag1-xNaxInCl6 Nanocrystals with K+ Cations Modulates Surface Ligands Density and Photoluminescence Efficiency.

We show how, in the synthesis of yellow-emissive Bi-doped Cs2Ag1-xNaxInCl6 double perovskite nanocrystals (NCs), preventing the transient formation of Ag0 particles increases the photoluminescence quantum yield (PLQY) of the NCs from ∼30% to ∼60%. Calculations indicate that the presence of even a single Ag0 species on the surface of a NC introduces deep trap states. The PL efficiency of these NCs is further increased to ∼70% by partial replacement of Na+ with K+ ions, up to a 7% K content, due to a lattice expansion that promotes a more favorable ligands packing on the NC surface, hence better surface passivation. A further increase in K+ lowers the PLQY, due to both the activation of nonradiative quenching channels and a lower oscillator strength of the BiCl6→AgCl6 transition (through which PL emission occurs). The work indicates how a deeper understanding of parameters influencing carrier trapping/relaxation can boost the PLQY of double perovskites NCs.

Stable CsPbBr3 Nanoclusters Feature a Disk-like Shape and a Distorted Orthorhombic Structure.

CsPbBr3 nanoclusters have been synthesized by several groups and mostly employed as single-source precursors for the synthesis of anisotropic perovskite nanostructures or perovskite-based heterostructures. Yet, a detailed characterization of such clusters is still lacking due to their high instability. In this work, we were able to stabilize CsPbBr3 nanoclusters by carefully selecting ad hoc ligands (benzoic acid together with oleylamine) to passivate their surface. The clusters have a narrow absorption peak at 400 nm, a band-edge emission peaked at 410 nm at room temperature, and their composition is identified as CsPbBr2.3. Synchrotron X-ray pair distribution function measurements indicate that the clusters exhibit a disk-like shape with a thickness smaller than 2 nm and a diameter of 13 nm, and their crystal structure is a highly distorted orthorhombic CsPbBr3. Based on small- and wide-angle X-ray scattering analyses, the clusters tend to form a two-dimensional (2D) hexagonal packing with a short-range order and a lamellar packing with a long-range order.

ZnCl2 Mediated Synthesis of InAs Nanocrystals with Aminoarsine.

The most developed approaches for the synthesis of InAs nanocrystals (NCs) rely on pyrophoric, toxic, and not readily available tris-trimethylsilyl (or tris-trimethylgermil) arsine precursors. Less toxic and commercially available chemicals, such as tris(dimethylamino)arsine, have recently emerged as alternative As precursors. Nevertheless, InAs NCs made with such compounds need to be further optimized in terms of size distribution and optical properties in order to meet the standard reached with tris-trimethylsilyl arsine. To this aim, in this work we investigated the role of ZnCl2 used as an additive in the synthesis of InAs NCs with tris(dimethylamino)arsine and alane N,N-dimethylethylamine as the reducing agent. We discovered that ZnCl2 helps not only to improve the size distribution of InAs NCs but also to passivate their surface acting as a Z-type ligand. The presence of ZnCl2 on the surface of the NCs and the excess of Zn precursor used in the synthesis enable the subsequent in situ growth of a ZnSe shell, which is realized by simply adding the Se precursor to the crude reaction mixture. The resulting InAs@ZnSe core@shell NCs exhibit photoluminescence emission at ∼860 nm with a quantum yield as high as 42±4%, which is a record for such heterostructures, given the relatively high mismatch (6%) between InAs and ZnSe. Such bright emission was ascribed to the formation, under our peculiar reaction conditions, of an In-Zn-Se intermediate layer between the core and the shell, as indicated by X-ray photoelectron spectroscopy and elemental analyses, which helps to release the strain between the two materials.

Metamorphoses of Cesium Lead Halide Nanocrystals.

Following the impressive development of bulk lead-based perovskite photovoltaics, the "perovskite fever" did not spare nanochemistry. In just a few years, colloidal cesium lead halide perovskite nanocrystals have conquered researchers worldwide with their easy synthesis and color-pure photoluminescence. These nanomaterials promise cheap solution-processed lasers, scintillators, and light-emitting diodes of record brightness and efficiency. However, that promise is threatened by poor stability and unwanted reactivity issues, throwing down the gauntlet to chemists.More generally, Cs-Pb-X nanocrystals have opened an exciting chapter in the chemistry of colloidal nanocrystals, because their ionic nature and broad diversity have challenged many paradigms established by nanocrystals of long-studied metal chalcogenides, pnictides, and oxides. The chemistry of colloidal Cs-Pb-X nanocrystals is synonymous with change: these materials demonstrate an intricate pattern of shapes and compositions and readily transform under physical stimuli or the action of chemical agents. In this Account, we walk through four types of Cs-Pb-X nanocrystal metamorphoses: change of structure, color, shape, and surface. These transformations are often interconnected; for example, a change in shape may also entail a change of color.The ionic bonding, high anion mobility due to vacancies, and preservation of cationic substructure in the Cs-Pb-X compounds enable fast anion exchange reactions, allowing the precise control of the halide composition of nanocrystals of perovskites and related compounds (e.g., CsPbCl3 ⇄ CsPbBr3 ⇄ CsPbI3 and Cs4PbCl6 ⇄ Cs4PbBr6 ⇄ Cs4PbI6) and tuning of their absorption edge and bright photoluminescence across the visible spectrum. Ion exchanges, however, are just one aspect of a richer chemistry.Cs-Pb-X nanocrystals are able to capture or release (in short, trade) ions or even neutral species from or to the surrounding environment, causing major changes to their structure and properties. The trade of neutral PbX2 units allows Cs-Pb-X nanocrystals to cross the boundaries among four different types of compounds: 4CsX + PbX2 ⇄ Cs4PbBr6 + 3PbX2 ⇄ 4CsPbBr3 + PbX2 ⇄ 4CsPb2X5. These reactions do not occur at random, because the reactant and product nanocrystals are connected by the Cs+ cation substructure preservation principle, stating that ion trade reactions can transform one compound into another by means of distorting, expanding, or contracting their shared Cs+ cation substructure.The nanocrystal surface is a boundary between the core and the surrounding environment of Cs-Pb-X nanocrystals. The surface influences nanocrystal stability, optical properties, and shape. For these reasons, the dynamic surface of Cs-Pb-X nanocrystals has been studied in detail, especially in CsPbX3 perovskites. Two takeaways have emerged from these studies. First, the competition between primary alkylammonium and cesium cations for the surface sites during the CsPbX3 nanocrystal nucleation and growth governs the cube/plate shape equilibrium. Short-chain acids and branched amines influence that equilibrium and enable shape-shifting synthesis of pure CsPbX3 cubes, nanoplatelets, nanosheets, or nanowires. Second, quaternary ammonium halides are emerging as superior ligands that extend the shelf life of Cs-Pb-X colloidal nanomaterials, boost their photoluminescence quantum yield, and prevent foreign ions from escaping the nanocrystals. That is accomplished by combining reduced ligand solubility, due to the branched organic ammonium cation, with the surface-healing capabilities of the halide counterions, which are small Lewis bases.

Fast Intrinsic Emission Quenching in Cs4PbBr6 Nanocrystals.

Cs4PbBr6 (0D) nanocrystals at room temperature have both been reported as nonemissive and green-emissive systems in conflicting reports, with no consensus regarding both the origin of the green emission and the emission quenching mechanism. Here, via ab initio molecular dynamics (AIMD) simulations and temperature-dependent photoluminescence (PL) spectroscopy, we show that the PL in these 0D metal halides is thermally quenched well below 300 K via strong electron-phonon coupling. To unravel the source of green emission reported for bulk 0D systems, we further study two previously suggested candidate green emitters: (i) a Br vacancy, which we demonstrate to present a strong thermal emission quenching at room temperature; (ii) an impurity, based on octahedral connectivity, that succeeds in suppressing nonradiative quenching via a reduced electron-phonon coupling in the corner-shared lead bromide octahedral network. These findings contribute to unveiling the mechanism behind the temperature-dependent PL in lead halide materials of different dimensionality.

Fast A-Site Cation Cross-Exchange at Room Temperature: Single-to Double- and Triple-Cation Halide Perovskite Nanocrystals.

We report here fast A-site cation cross-exchange between APbX3 perovskite nanocrystals (NCs) made of different A-cations (Cs (cesium), FA (formamidinium), and MA (methylammonium)) at room temperature. Surprisingly, the A-cation cross-exchange proceeds as fast as the halide (X=Cl, Br, or I) exchange with the help of free A-oleate complexes present in the freshly prepared colloidal perovskite NC solutions. This enabled the preparation of double (MACs, MAFA, CsFA)- and triple (MACsFA)-cation perovskite NCs with an optical band gap that is finely tunable by their A-site composition. The optical spectroscopy together with structural analysis using XRD and atomically resolved high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and integrated differential phase contrast (iDPC) STEM indicates the homogeneous distribution of different cations in the mixed perovskite NC lattice. Unlike halide ions, the A-cations do not phase-segregate under light illumination.

Colloidal Bismuth Chalcohalide Nanocrystals.

Here we present a colloidal approach to synthesize bismuth chalcohalide nanocrystals (BiEX NCs, in which E=S, Se and X=Cl, Br, I). Our method yields orthorhombic elongated BiEX NCs, with BiSCl crystallizing in a previously unknown polymorph. The BiEX NCs display a composition-dependent band gap spanning the visible spectral range and absorption coefficients exceeding 105  cm-1 . The BiEX NCs show chemical stability at standard laboratory conditions and form colloidal inks in different solvents. These features enable the solution processing of the NCs into robust solid films yielding stable photoelectrochemical current densities under solar-simulated irradiation. Overall, our versatile synthetic protocol may prove valuable in accessing colloidal metal chalcohalide nanomaterials at large and contributes to establish metal chalcohalides as a promising complement to metal chalcogenides and halides for applied nanotechnology.