RESUMO
STATEMENT OF PROBLEM: Brazilian green propolis may be an alternative product that reduces the development of a microbial biofilm on the polymers used for maxillofacial prostheses. However, its effects as a disinfectant have not been fully established. PURPOSE: The purpose of this in vitro study was to investigate the effects of Brazilian green propolis alcohol solutions against the Staphylococcus aureus biofilm on polymers used in maxillofacial prostheses, the maxillofacial silicone elastomer (MDX4-4210), and specific acrylic resins for ocular prostheses. MATERIAL AND METHODS: A total of 324 disk-shaped specimens (3×10 mm) of each material were fabricated. All specimens were contaminated with S. aureus (108 cells/mL) to assess the antibiofilm activity of immersion solutions and protocols. Thus, 162 specimens of each material were randomly distributed and equally divided into 5 groups of disinfectants and 1 control group: 3 separate groups of 2.5%, 5%, and 10% propolis alcohol solutions, 1 group of 5% propolis alcohol gel, a positive control group of 2% chlorhexidine gluconate, and a negative control group of distilled water. Specimens (n=9) were disinfected by immersion for 5, 10, and 15 minutes and immersed in culture medium for 24 hours. Any notable turgescence in the final medium was considered indicative of a biofilm. The effects of disinfectants were analyzed by a turbidity assay and by scanning electron microscopy. Data were analyzed descriptively. RESULTS: The final medium with specimens disinfected with 10% propolis alcohol solution showed no turbidity, indicating constant efficacy against the S. aureus biofilm. Similarly, these findings were observed in the 2% chlorhexidine gluconate group. Scanning electron microscopy images demonstrated that the surface of the polymers treated with 10% propolis alcohol solution did not show bacterial colonies. CONCLUSIONS: Disinfection with 10% green propolis alcohol solution was effective in eliminating the S. aureus biofilm from specimens of maxillofacial elastomer and N1 acrylic resin specific to ocular prostheses by immersion for 5 minutes.